[Paraview] ParaView-Superbuild Win10 Errors

Aron Helser aron.helser at kitware.com
Tue Mar 27 14:24:35 EDT 2018


Jamil,
Make sure you scroll up and find the first error - ninja is a parallel
build system, so the build will continue on other threads after the first
error. Then maybe you can solve that first error, and others will be fixed.

It looks like an earlier error caused 'quat.lib' not to be built, but it's
hard to tell....
-Aron

On Tue, Mar 27, 2018 at 10:37 AM, Jamil Goettlich <jamil.goettlich at gmail.com
> wrote:

> Hi Shawn,
>
> thanks a lot for the tip, configuring worked with the Visual Studio 12.0
> compiler! Now I am getting a lot of build errors though.
>
> C:\Tools\paraview\superbuild\hdf5\src\src\H5Ztrans.c(1135) : warning
> C4244: '=' : conversion from 'double' to 'float', possible loss of data
> [255/256] Linking C shared library bin\hdf5.dll
>    Creating library bin\hdf5.lib and object bin\hdf5.exp
> [256/256] Linking C shared library bin\hdf5_hl.dll
>    Creating library bin\hdf5_hl.lib and object bin\hdf5_hl.exp
> ninja: build stopped: subcommand failed.
>
> LINK : fatal error LNK1104: cannot open file 'quat\quat.lib'
> [3/97] Linking CXX shared library gpsnmealib\gpsnmea.dll
> [4/97] Building CXX object client_src\CMakeFiles\vrpn_pri
> nt_messages.dir\vrpn_print_messages.C.obj
> [5/97] Building CXX object client_src\CMakeFiles\ff_clien
> t.dir\ff_client.C.obj
> [6/97] Building CXX object client_src\CMakeFiles\phan_cli
> ent.dir\phan_client.C.obj
> [7/97] Building CXX object client_src\CMakeFiles\printval
> s.dir\printvals.C.obj
> ninja: build stopped: subcommand failed.
> CMake Error at C:/Tools/paraview/superbuild/sb-vrpn-build.cmake:43
> (message):
>   Failed with exit code 1
>
> These are some examples. My it be possible that the ninja version is not
> suited either? Do you know what ninja version you were building the
> superbuild with?
>
> Thanks a lot,
> Jamil
>
> (P.s. Sorry Shawn for my posting mistake)
>
> 2018-03-27 16:07 GMT+02:00 Shawn Waldon <shawn.waldon at kitware.com>:
>
>> Hi Jamil,
>>
>> Please keep replies CCed to the mailing list (Reply All) so others can
>> contribute to the discussion (or find answers to their own problems later
>> in the archives).
>>
>> We use the most recent release of ninja on most of our build machines (so
>> that one should work).  I'm not sure why you are getting that error
>> messages from what you have included... maybe others on the list can chime
>> in or you can give more details.
>>
>> Shawn
>>
>> On Tue, Mar 27, 2018 at 6:40 AM, Jamil Goettlich <
>> jamil.goettlich at gmail.com> wrote:
>>
>>> Hi Shawn,
>>>
>>> thanks a lot for the tip, configuring worked with the Visual Studio 12.0
>>> compiler! Now I am getting a lot of build errors though.
>>>
>>> C:\Tools\paraview\superbuild\hdf5\src\src\H5Ztrans.c(1135) : warning
>>> C4244: '=' : conversion from 'double' to 'float', possible loss of data
>>> [255/256] Linking C shared library bin\hdf5.dll
>>>    Creating library bin\hdf5.lib and object bin\hdf5.exp
>>> [256/256] Linking C shared library bin\hdf5_hl.dll
>>>    Creating library bin\hdf5_hl.lib and object bin\hdf5_hl.exp
>>> ninja: build stopped: subcommand failed.
>>>
>>> LINK : fatal error LNK1104: cannot open file 'quat\quat.lib'
>>> [3/97] Linking CXX shared library gpsnmealib\gpsnmea.dll
>>> [4/97] Building CXX object client_src\CMakeFiles\vrpn_pri
>>> nt_messages.dir\vrpn_print_messages.C.obj
>>> [5/97] Building CXX object client_src\CMakeFiles\ff_clien
>>> t.dir\ff_client.C.obj
>>> [6/97] Building CXX object client_src\CMakeFiles\phan_cli
>>> ent.dir\phan_client.C.obj
>>> [7/97] Building CXX object client_src\CMakeFiles\printval
>>> s.dir\printvals.C.obj
>>> ninja: build stopped: subcommand failed.
>>> CMake Error at C:/Tools/paraview/superbuild/sb-vrpn-build.cmake:43
>>> (message):
>>>   Failed with exit code 1
>>>
>>> These are some examples. My it be possible that the ninja version is not
>>> suited either? Do you know what ninja version you were building the
>>> superbuild with?
>>>
>>> Thanks a lot,
>>> Jamil
>>>
>>> 2018-03-26 17:21 GMT+02:00 Shawn Waldon <shawn.waldon at kitware.com>:
>>>
>>>> Hi Jamil,
>>>>
>>>> I'm not sure if this will get you all the way to a build, but here are
>>>> some pointers:
>>>>
>>>> We build with the visual studio compiler but use the Ninja generator
>>>> since it is significantly faster than VS.
>>>>
>>>> VS 2017 may not work.  Our binaries are built with 2013 right now and
>>>> we plan to move to 2015 after the current release cycle.  If you want what
>>>> you are building to be compatible with the Kitware binaries, you will need
>>>> to use 2013.  Also, I believe there are compiler errors if you use 2017
>>>> right now.
>>>>
>>>> To build with Ninja and VS compilers, you need to be in a visual studio
>>>> command prompt rather than a normal shell (it sets a bunch of environment
>>>> vars, which I think is what is missing in your last example).  To convert a
>>>> normal command prompt you run (example is for VS2015, your path may differ)
>>>> 'C:/Program Files (x86)/Microsoft Visual Studio 14.0/VC/vcvarsall.bat x64'
>>>> in your shell and it will set the environment variables for you.  If you
>>>> have the environment set up before running cmake -G Ninja it should just
>>>> pick the right compiler.
>>>>
>>>> HTH,
>>>>
>>>> Shawn
>>>>
>>>> On Mon, Mar 26, 2018 at 10:59 AM, Jamil Goettlich <
>>>> jamil.goettlich at gmail.com> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> I am having Problems building ParaView with ParaView-Superbuild. As
>>>>> Visual Studio is not supported, I tried other build systems and compilers.
>>>>> Unfortunately none of them succeeded. On the other hand I was able to build
>>>>> small HelloWord programs with each of the combinations listed below and
>>>>> without any errors. Here is what I did:
>>>>>
>>>>> First, I cloned from git:
>>>>> git clone --recursive https://gitlab.kitware.com/par
>>>>> aview/paraview-superbuild.git
>>>>> Then cd paraview-superbuild and created new folder (build).
>>>>>
>>>>> The following cases did not work out (Doesnt matter if using Git Bash
>>>>> or VS Command Prompt):
>>>>> Build System: Ninja, Compiler: MinGW
>>>>> command: cmake .. -G "Ninja"
>>>>> Error:
>>>>> CMake Error at superbuild/projects/win32/boost.cmake:5 (message):
>>>>>   At least Visual Studio 9.0 is required
>>>>> Call Stack (most recent call first):
>>>>>   superbuild/cmake/SuperbuildMacros.cmake:477 (include)
>>>>>   superbuild/CMakeLists.txt:145 (_superbuild_discover_projects)
>>>>>
>>>>> Although I have Visual Studio 15 2017 installed it does not seem to
>>>>> work.
>>>>>
>>>>> Build System: Ninja, Compiler: MSVC compiler (cl.exe in C:\Program
>>>>> Files (x86)\Microsoft Visual Studio\2017\Community\VC\Tools
>>>>> \MSVC\14.12.25827\bin\Hostx64\x64)
>>>>> Error:
>>>>>
>>>>> The C compiler
>>>>> "C:/Program Files (x86)/Microsoft Visual Studio/2017/Community/VC/Tools
>>>>> /MSVC/14.12.25827/bin/Hostx86/x64/cl.exe"
>>>>> is not able to compile a simple test program.
>>>>> It fails with the following output:
>>>>> Change Dir: C:/Tools/paraview-superbuild/build/CMakeFiles/CMakeTmp
>>>>> Run Build Command:"nmake" "/NOLOGO" "cmTC_008b4\fast"
>>>>> "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Tools
>>>>> \MSVC\14.12.25827\bin\Hostx64\x64\nmake.exe" -f
>>>>> CMakeFiles\cmTC_008b4.dir\build.make /nologo -L
>>>>> CMakeFiles\cmTC_008b4.dir\build
>>>>>
>>>>> Building C object CMakeFiles/cmTC_008b4.dir/testCCompiler.c.obj
>>>>>
>>>>> C:\PROGRA~2\MIB055~1\2017\COMMUN~1\VC\Tools\MSVC\1412~1.258\bin\Hostx86\x64\cl.exe
>>>>> @C:\Users\JamiG\AppData\Local\Temp\nmD540.tmp
>>>>>
>>>>> testCCompiler.c
>>>>>
>>>>> C:\Tools\paraview-superbuild\build\CMakeFiles\CMakeTmp\testCCompiler.c:
>>>>> fatal error C1001: An internal error has occurred in the compiler.
>>>>>
>>>>> (compiler file 'msc1.cpp', line 1507)
>>>>>
>>>>> To work around this problem, try simplifying or changing the program
>>>>> near the locations listed above.
>>>>>
>>>>> Please choose the Technical Support command on the Visual C++
>>>>>
>>>>> Help menu, or open the Technical Support help file for more information
>>>>>
>>>>> Internal Compiler Error in C:\PROGRA~2\MIB055~1\2017\COMM
>>>>> UN~1\VC\Tools\MSVC\1412~1.258\bin\Hostx86\x64\cl.exe. You will be
>>>>> prompted to send an error report to Microsoft later.
>>>>>
>>>>> NMAKE : fatal error U1077: 'C:\PROGRA~2\MIB055~1\2017\COM
>>>>> MUN~1\VC\Tools\MSVC\1412~1.258\bin\Hostx86\x64\cl.exe' : return code
>>>>> '0x2'
>>>>>
>>>>> Stop.
>>>>>
>>>>> NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual
>>>>> Studio\2017\Community\VC\Tools\MSVC\14.12.25827\bin\Hostx64\x64\nmake.exe"'
>>>>> : return code '0x2'
>>>>>
>>>>> Stop.
>>>>>
>>>>>
>>>>> Build System: NMake, Compiler: MSVC compiler (cl.exe in C:\Program
>>>>> Files (x86)\Microsoft Visual Studio\2017\Community\VC\Tools
>>>>> \MSVC\14.12.25827\bin\Hostx64\x64)
>>>>>
>>>>> Here, cmake recognized the compiler, but it throws another error
>>>>> Error:
>>>>>
>>>>> CMake Error at C:/Program Files/CMake/share/cmake-3.10/M
>>>>> odules/CMakeDetermineRCCompiler.cmake:20 (message):
>>>>> Could not find compiler set in environment variable RC:
>>>>> rc.
>>>>> Call Stack (most recent call first):
>>>>> C:/Program Files/CMake/share/cmake-3.10/M
>>>>> odules/Platform/Windows-MSVC.cmake:323 (enable_language)
>>>>> C:/Program Files/CMake/share/cmake-3.10/M
>>>>> odules/Platform/Windows-MSVC-C.cmake:5 (__windows_compiler_msvc)
>>>>> C:/Program Files/CMake/share/cmake-3.10/M
>>>>> odules/CMakeCInformation.cmake:48 (include)
>>>>> CMakeLists.txt:3 (project)
>>>>>
>>>>> CMake Error: CMAKE_RC_COMPILER not set, after EnableLanguage
>>>>>
>>>>>
>>>>> I am out of ideas now.
>>>>> I would be really happy for a detailed build description as I am sure
>>>>> I did not understand something properly.
>>>>>
>>>>> And every hint on how to resolve on of those errors is very welcome
>>>>> too.
>>>>>
>>>>>
>>>>> Thanks in advance!
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Powered by www.kitware.com
>>>>>
>>>>> Visit other Kitware open-source projects at
>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>
>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>> http://paraview.org/Wiki/ParaView
>>>>>
>>>>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>>>>
>>>>> Follow this link to subscribe/unsubscribe:
>>>>> https://public.kitware.com/mailman/listinfo/paraview
>>>>>
>>>>>
>>>>
>>>
>>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/
> opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://public.kitware.com/mailman/listinfo/paraview
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20180327/24812618/attachment.html>


More information about the ParaView mailing list