[Paraview] Unexpected measurement appears in 5.4.1 but not 5.0.1

Cory Quammen cory.quammen at kitware.com
Wed Jan 31 13:09:24 EST 2018


Ufuk,

Thanks for the report. Is there a reliable way to reproduce the
behavior that you can share?

Best,
Cory

On Wed, Jan 31, 2018 at 12:16 PM, Ufuk Turuncoglu
<u.utku.turuncoglu at be.itu.edu.tr> wrote:
> I don't know it is related or not. I have very similar behavior under 5.4.1. If i save a state and load it later, Polar Axes show up and i need to disable it from the properties panel. Somehow, ParaView loads Polar Axes even if it is not activated in the original pipeline. It might help to find the source of the issue.
>
> Best Regards,
>
> --ufuk
>
> ----- Original Message -----
> From: "Cory Quammen" <cory.quammen at kitware.com>
> To: "Joe Ping-Lin Hsiao" <phsiao at cs.unc.edu>
> Cc: "paraview" <paraview at paraview.org>
> Sent: Wednesday, January 31, 2018 6:44:45 PM
> Subject: Re: [Paraview] Unexpected measurement appears in 5.4.1 but not 5.0.1
>
> Hmm, that's weird. The Polar Axes should be off by default. Do the
> Polar Axes appear when creating a Sphere source?
>
> You should be able to force it off by adding the following line to the
> loadFile() function in your script:
>
> display.PolarAxes.Visibility = 0
>
> HTH,
> Cory
>
> On Tue, Jan 23, 2018 at 4:40 PM, Joe Ping-Lin Hsiao <phsiao at cs.unc.edu> wrote:
>> Yes exactly.
>>
>> On Tue, Jan 23, 2018 at 3:47 PM, Cory Quammen <cory.quammen at kitware.com>
>> wrote:
>>>
>>> Hi Joe,
>>>
>>> Are you referring to the circular (polar axes) in the image? It says
>>> 90.0 deg, 45.0 deg., etc.
>>>
>>> Thanks,
>>> Cory
>>>
>>> On Tue, Jan 23, 2018 at 3:31 PM, Joe Ping-Lin Hsiao <phsiao at cs.unc.edu>
>>> wrote:
>>> > The attached image shows the unexpected measure with text. I tested two
>>> > versions of ParaView and it only happens in 5.4.1 but not 5.0.1.
>>> >
>>> > 180 stacks are loaded and set to volume rendering by my Python script,
>>> > which
>>> > is also attached.
>>> >
>>> > Thanks,
>>> > Joe
>>> >
>>> > _______________________________________________
>>> > Powered by www.kitware.com
>>> >
>>> > Visit other Kitware open-source projects at
>>> > http://www.kitware.com/opensource/opensource.html
>>> >
>>> > Please keep messages on-topic and check the ParaView Wiki at:
>>> > http://paraview.org/Wiki/ParaView
>>> >
>>> > Search the list archives at: http://markmail.org/search/?q=ParaView
>>> >
>>> > Follow this link to subscribe/unsubscribe:
>>> > https://paraview.org/mailman/listinfo/paraview
>>> >
>>>
>>>
>>>
>>> --
>>> Cory Quammen
>>> Staff R&D Engineer
>>> Kitware, Inc.
>>
>>
>
>
>
> --
> Cory Quammen
> Staff R&D Engineer
> Kitware, Inc.
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://paraview.org/mailman/listinfo/paraview



-- 
Cory Quammen
Staff R&D Engineer
Kitware, Inc.


More information about the ParaView mailing list