[Paraview] Error while launching Paraview (and Paraview Web) in Window 10

Sebastien Jourdain sebastien.jourdain at kitware.com
Mon Jan 2 11:06:46 EST 2017 

Hi Debopam,

Do you see the orientation axis? Does it move when you rotate the scene?
What happen when you click on "+" and choose the Wavelet? Do you see
something?

I'm wondering if you still run into an invalid path issue due to / or \.

Seb

On Mon, Jan 2, 2017 at 6:38 AM, Debopam Ghoshal <debopamg at gmail.com> wrote:

> Hi Seb,
>
> 1. "C:/ParaView-5.2.0-Qt4-OpenGL2-MPI-Windows-64bit/data" works fine. Now
> we can see the list of files in the data folder.
>
> However, there seems to be some problem with the ParaviewWeb Application
> (or may be with the graphics driver?). Because we cannot render the sample
> mesh files (eg: can.ex2) in the visualizer. When we tried to view the files
> in the desktop application they are displayed without any problems. A
> screenshot of the graphics driver is attached for your reference.
>
> 2. Ok.
>
>
> Cheers & Best Wishes,
> Debopam
> -------------------------------
>
> On Fri, Dec 30, 2016 at 9:02 PM, Sebastien Jourdain <
> sebastien.jourdain at kitware.com> wrote:
>
>> Hi Debopam,
>>
>> 1) I'm not sure to know what is the issue with the path but try with
>> either:
>>
>> "C:/ParaView-5.2.0-Qt4-OpenGL2-MPI-Windows-64bit/data"
>> or
>> "C:\\ParaView-5.2.0-Qt4-OpenGL2-MPI-Windows-64bit\\data"
>>
>> 2) paraview_console_error.jpg is not an error since you are not using the
>> launcher. So that part is actually expected.
>> For the second error when you try to delete the TimeAnnotation, I'm not
>> sure to know what is the issue. You should know more by looking at the
>> output of the command line.
>>
>> Seb
>>
>>
>> On Fri, Dec 30, 2016 at 12:53 AM, Debopam Ghoshal <debopamg at gmail.com>
>> wrote:
>>
>>> (Reposting for a larger audience)
>>>
>>> Hi Ken,
>>>
>>> When we start paraview web we noted two things:
>>>
>>> 1. In the Visualizer, the Files tab is not showing any files. Please
>>> refer to the attached screenshot (paraview_home.jpg)
>>> 2. There is an error showing up at the browser console
>>> (paraview_console_error.jpg, paraview_console_error2.jpg)
>>>
>>> The paraview startup messages are also given for your reference
>>> (paraview_log.jpg)
>>>
>>>
>>>
>>> Cheers & Best Wishes,
>>> Debopam
>>> -------------------------------
>>> Cell: +91 98304 10041 <+91%2098304%2010041>
>>>
>>> On Wed, Dec 28, 2016 at 10:35 AM, Debopam Ghoshal <debopamg at gmail.com>
>>> wrote:
>>>
>>>> Hi Ken,
>>>>
>>>> We finally got a machine where Paraview 5.2 MPI is running without any
>>>> issues. However, when we start paraview web we noted two things:
>>>>
>>>> 1. In the Visualizer, the Files tab is not showing any files. Please
>>>> refer to the attached screenshot (paraview_home.jpg)
>>>> 2. There is an error showing up at the browser console
>>>> (paraview_console_error.jpg, paraview_console_error2.jpg)
>>>>
>>>> The paraview startup messages are also given for your reference
>>>> (paraview_log.jpg)
>>>>
>>>>
>>>> Cheers & Best Wishes,
>>>> Debopam
>>>> -------------------------------
>>>> Cell: +91 98304 10041 <+91%2098304%2010041>
>>>>
>>>> On Tue, Dec 13, 2016 at 7:03 PM, Ken Martin <ken.martin at kitware.com>
>>>> wrote:
>>>>
>>>>> ParaView with the old OpenGL backend should work on any windows
>>>>> machine. It may be slow and some of the advanced techniques may not work
>>>>> but the basics will all work.
>>>>>
>>>>> On Tue, Dec 13, 2016 at 5:57 AM, Debopam Ghoshal <debopamg at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Yes Ken, you are right. This is an older machine. So, will it be
>>>>>> possible to use ParaView (with the old OpenGL backend) on this machine? Or
>>>>>> we need to get a machine with better configuration to run ParaView?
>>>>>>
>>>>>> Additionally, will it be possible to run ParaView (and ParaViewWeb)
>>>>>> on a Windows 10 guest running in VirtualBox on a MacOS host?
>>>>>>
>>>>>> Cheers & Best Wishes,
>>>>>> Debopam
>>>>>> -------------------------------
>>>>>> Cell: +91 98304 10041
>>>>>>
>>>>>> On Mon, Dec 12, 2016 at 8:22 PM, Ken Martin <ken.martin at kitware.com>
>>>>>> wrote:
>>>>>>
>>>>>>> So if I am reading this correctly the machine has a rv516 GPU which
>>>>>>> was released in 2007. That GPU does not support anything beyond OpenGL 2.0
>>>>>>> which means you would need to use the old OpenGL backend with VTK/ParaView.
>>>>>>>
>>>>>>> http://www.gpureview.com/ati-rv516-chip-135.html
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Dec 12, 2016 at 9:21 AM, Debopam Ghoshal <debopamg at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> Hi Ken,
>>>>>>>>
>>>>>>>> This is a standard desktop PC running Window 10 Professional
>>>>>>>> Edition. If there is something I need to install on this machine, please
>>>>>>>> let me know.
>>>>>>>>
>>>>>>>> Cheers & Best Wishes,
>>>>>>>> Debopam
>>>>>>>> -------------------------------
>>>>>>>> Cell: +91 98304 10041
>>>>>>>>
>>>>>>>> On Mon, Dec 12, 2016 at 7:18 PM, Ken Martin <ken.martin at kitware.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> Is this a server maybe? It seems like the system lacks any OpenGL
>>>>>>>>> support beyond the default Microsoft implementation which is circa OpenGL
>>>>>>>>> 1.4 I believe.
>>>>>>>>>
>>>>>>>>> On Sun, Dec 11, 2016 at 11:51 PM, Debopam Ghoshal <
>>>>>>>>> debopamg at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Ken,
>>>>>>>>>>
>>>>>>>>>> When I ran the command: vtkRenderingOpenGL2CxxTests.exe
>>>>>>>>>> TestAppleBug there was an error. A screenshot of the error is attached for
>>>>>>>>>> your reference. Please let me know if you require any other details.
>>>>>>>>>>
>>>>>>>>>> Cheers & Best Wishes,
>>>>>>>>>> Debopam
>>>>>>>>>> -------------------------------
>>>>>>>>>> Cell: +91 98304 10041
>>>>>>>>>>
>>>>>>>>>> On Fri, Dec 9, 2016 at 7:17 PM, Ken Martin <
>>>>>>>>>> ken.martin at kitware.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Here is a new version of the executable, can you try it?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Fri, Dec 9, 2016 at 1:42 AM, Debopam Ghoshal <
>>>>>>>>>>> debopamg at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Cory and Ken,
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks a lot for your prompt response.
>>>>>>>>>>>>
>>>>>>>>>>>> Below are the details you asked:
>>>>>>>>>>>> 1. display-props.png - screenshot of:  Settings -> System ->
>>>>>>>>>>>> Display -> Advanced display settings -> Display adapter
>>>>>>>>>>>> properties
>>>>>>>>>>>> 2. vtkrendering.png - screenshot of the error which came up
>>>>>>>>>>>> when I ran: vtkRenderingOpenGL2CxxTests.exe TestAppleBug
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Cheers & Best Wishes,
>>>>>>>>>>>> Debopam
>>>>>>>>>>>> -------------------------------
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Dec 8, 2016 at 10:49 PM, Ken Martin <
>>>>>>>>>>>> ken.martin at kitware.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Can you try running the following executable (rename .foo to
>>>>>>>>>>>>> .exe) from a cmd shell as
>>>>>>>>>>>>>
>>>>>>>>>>>>> vtkRenderingOpenGL2CxxTests.exe TestAppleBug
>>>>>>>>>>>>>
>>>>>>>>>>>>> and see if it crashes, and send the output is produces
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>> Ken
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Dec 8, 2016 at 10:46 AM, Cory Quammen <
>>>>>>>>>>>>> cory.quammen at kitware.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Depobam,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks for trying out the other ParaView versions. I suspect
>>>>>>>>>>>>>> there
>>>>>>>>>>>>>> might be a problem with the new OpenGL backend on your system
>>>>>>>>>>>>>> as that
>>>>>>>>>>>>>> has changed between ParaView 4 and 5. What kind of graphics
>>>>>>>>>>>>>> card do
>>>>>>>>>>>>>> you have on your system. You can get some of the display
>>>>>>>>>>>>>> properties by
>>>>>>>>>>>>>> going to
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Settings -> System -> Display -> Advanced display settings ->
>>>>>>>>>>>>>> Display
>>>>>>>>>>>>>> adapter properties
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ken,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Are there any things Depobam can do on his Windows 10 system
>>>>>>>>>>>>>> to help
>>>>>>>>>>>>>> diagnose whether the OpenGL2 backend is causing the crash he
>>>>>>>>>>>>>> is seeing
>>>>>>>>>>>>>> in ParaView?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>> Cory
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, Dec 8, 2016 at 2:51 AM, Debopam Ghoshal <
>>>>>>>>>>>>>> debopamg at gmail.com> wrote:
>>>>>>>>>>>>>> > Hi Cory,
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > I tried to run Paraview 5.1.2, but it gives the same error.
>>>>>>>>>>>>>> However, I was
>>>>>>>>>>>>>> > able to run Paraview 4.1 successfully on Window 10.
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > But ParaviewWeb failed to run as it seems that version 4.1
>>>>>>>>>>>>>> does not have the
>>>>>>>>>>>>>> > python script used for running ParaviewWeb.
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > Cheers & Best Wishes,
>>>>>>>>>>>>>> > Debopam
>>>>>>>>>>>>>> > -------------------------------
>>>>>>>>>>>>>> > Cell: +91 98304 10041
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> > On Wed, Dec 7, 2016 at 5:14 AM, Sebastien Jourdain
>>>>>>>>>>>>>> > <sebastien.jourdain at kitware.com> wrote:
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >> Cory you need to provide an absolute path as argument
>>>>>>>>>>>>>> "c:\.....".
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >> But the issue seems to be on ParaView itself. The (Qt)
>>>>>>>>>>>>>> executable crash at
>>>>>>>>>>>>>> >> startup on there machine, regardless of their goal to use
>>>>>>>>>>>>>> ParaViewWeb down
>>>>>>>>>>>>>> >> the road.
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >> Seb
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >> On Tue, Dec 6, 2016 at 10:06 AM, Cory Quammen <
>>>>>>>>>>>>>> cory.quammen at kitware.com>
>>>>>>>>>>>>>> >> wrote:
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> Correction: I could run ParaViewWeb on Windows 10, but I
>>>>>>>>>>>>>> couldn't load
>>>>>>>>>>>>>> >>> data through the web client. I didn't get pvpython.exe to
>>>>>>>>>>>>>> crash,
>>>>>>>>>>>>>> >>> though.
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> On Tue, Dec 6, 2016 at 11:35 AM, Cory Quammen <
>>>>>>>>>>>>>> cory.quammen at kitware.com>
>>>>>>>>>>>>>> >>> wrote:
>>>>>>>>>>>>>> >>> > Debopam,
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> > I just tried what you ran on Windows 10 and it ran fine
>>>>>>>>>>>>>> for me. One
>>>>>>>>>>>>>> >>> > thing I had to fix, which I doubt is the cause of your
>>>>>>>>>>>>>> crash, is the
>>>>>>>>>>>>>> >>> > data argument is actually just --data and not
>>>>>>>>>>>>>> --data-dir.
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> > We've had some other reports of 5.2 crashing on start
>>>>>>>>>>>>>> up on Windows.
>>>>>>>>>>>>>> >>> > Did 5.1 run fine for you?
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> > I wonder if you could try installing ParaView 4.4 from
>>>>>>>>>>>>>> >>> > http://www.paraview.org/download/ to see if it runs.
>>>>>>>>>>>>>> If it does, that
>>>>>>>>>>>>>> >>> > gives me a clue on where to look.
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> > Thanks,
>>>>>>>>>>>>>> >>> > Cory
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> > On Tue, Dec 6, 2016 at 5:23 AM, Debopam Ghoshal <
>>>>>>>>>>>>>> debopamg at gmail.com>
>>>>>>>>>>>>>> >>> > wrote:
>>>>>>>>>>>>>> >>> >> Hi,
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> I followed the instructions given here, but I am
>>>>>>>>>>>>>> getting the following
>>>>>>>>>>>>>> >>> >> error:
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Paraview Installation Directory:
>>>>>>>>>>>>>> >>> >> C:\ParaView-5.2.0-Qt4-OpenGL2-Windows-64bit
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Command:
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> .\bin\pvpython.exe \
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> "C:\ParaView-5.2.0-Qt4-OpenGL2
>>>>>>>>>>>>>> -Windows-64bit\share\paraview-5.2\web\visualizer\server\pvw-
>>>>>>>>>>>>>> visualizer.py"
>>>>>>>>>>>>>> >>> >> \
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>   --content
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> "C:\ParaView-5.2.0-Qt4-OpenGL2
>>>>>>>>>>>>>> -Windows-64bit\share\paraview-5.2\web\visualizer\www\"
>>>>>>>>>>>>>> >>> >> \
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>   --data-dir "C:\ParaView-5.2.0-Qt4-OpenGL2-Windows-64bit\data\"
>>>>>>>>>>>>>> \
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>   --port 8080
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Output:
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Console: 2016-12-02 10:09:51+0530 [-] Log opened.
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Error Window screenshot attached (PVW-Error.png)
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Other Details:
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> OS: Windows 10 Professional
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> RAM: 8GB
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> A screenshot of the system properties is attached for
>>>>>>>>>>>>>> your reference
>>>>>>>>>>>>>> >>> >> (Window10-SystemProps.png)
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Similar error occurred when I launched the Paraview
>>>>>>>>>>>>>> desktop
>>>>>>>>>>>>>> >>> >> application
>>>>>>>>>>>>>> >>> >> (ParaviewError.png).
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Cheers & Best Wishes,
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Debopam
>>>>>>>>>>>>>> >>> >> -------------------------------
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> _______________________________________________
>>>>>>>>>>>>>> >>> >> Powered by www.kitware.com
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Visit other Kitware open-source projects at
>>>>>>>>>>>>>> >>> >> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Please keep messages on-topic and check the ParaView
>>>>>>>>>>>>>> Wiki at:
>>>>>>>>>>>>>> >>> >> http://paraview.org/Wiki/ParaView
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Search the list archives at:
>>>>>>>>>>>>>> http://markmail.org/search/?q=ParaView
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>> >>> >> http://public.kitware.com/mailman/listinfo/paraview
>>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>>> >>> > --
>>>>>>>>>>>>>> >>> > Cory Quammen
>>>>>>>>>>>>>> >>> > Staff R&D Engineer
>>>>>>>>>>>>>> >>> > Kitware, Inc.
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> --
>>>>>>>>>>>>>> >>> Cory Quammen
>>>>>>>>>>>>>> >>> Staff R&D Engineer
>>>>>>>>>>>>>> >>> Kitware, Inc.
>>>>>>>>>>>>>> >>> _______________________________________________
>>>>>>>>>>>>>> >>> Powered by www.kitware.com
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>> >>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> Please keep messages on-topic and check the ParaView Wiki
>>>>>>>>>>>>>> at:
>>>>>>>>>>>>>> >>> http://paraview.org/Wiki/ParaView
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> Search the list archives at:
>>>>>>>>>>>>>> http://markmail.org/search/?q=ParaView
>>>>>>>>>>>>>> >>>
>>>>>>>>>>>>>> >>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>> >>> http://public.kitware.com/mailman/listinfo/paraview
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Cory Quammen
>>>>>>>>>>>>>> Staff R&D Engineer
>>>>>>>>>>>>>> Kitware, Inc.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Ken Martin PhD
>>>>>>>>>>>>> Chairman & CFO
>>>>>>>>>>>>> Kitware Inc.
>>>>>>>>>>>>> 28 Corporate Drive
>>>>>>>>>>>>> Clifton Park NY 12065
>>>>>>>>>>>>> 518 371 3971
>>>>>>>>>>>>>
>>>>>>>>>>>>> This communication, including all attachments, contains
>>>>>>>>>>>>> confidential and legally privileged information, and it is intended only
>>>>>>>>>>>>> for the use of the addressee.  Access to this email by anyone else is
>>>>>>>>>>>>> unauthorized. If you are not the intended recipient, any disclosure,
>>>>>>>>>>>>> copying, distribution or any action taken in reliance on it is prohibited
>>>>>>>>>>>>> and may be unlawful. If you received this communication in error please
>>>>>>>>>>>>> notify us immediately and destroy the original message.  Thank you.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Ken Martin PhD
>>>>>>>>>>> Chairman & CFO
>>>>>>>>>>> Kitware Inc.
>>>>>>>>>>> 28 Corporate Drive
>>>>>>>>>>> Clifton Park NY 12065
>>>>>>>>>>> 518 371 3971
>>>>>>>>>>>
>>>>>>>>>>> This communication, including all attachments, contains
>>>>>>>>>>> confidential and legally privileged information, and it is intended only
>>>>>>>>>>> for the use of the addressee.  Access to this email by anyone else is
>>>>>>>>>>> unauthorized. If you are not the intended recipient, any disclosure,
>>>>>>>>>>> copying, distribution or any action taken in reliance on it is prohibited
>>>>>>>>>>> and may be unlawful. If you received this communication in error please
>>>>>>>>>>> notify us immediately and destroy the original message.  Thank you.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Ken Martin PhD
>>>>>>>>> Chairman & CFO
>>>>>>>>> Kitware Inc.
>>>>>>>>> 28 Corporate Drive
>>>>>>>>> Clifton Park NY 12065
>>>>>>>>> 518 371 3971
>>>>>>>>>
>>>>>>>>> This communication, including all attachments, contains
>>>>>>>>> confidential and legally privileged information, and it is intended only
>>>>>>>>> for the use of the addressee.  Access to this email by anyone else is
>>>>>>>>> unauthorized. If you are not the intended recipient, any disclosure,
>>>>>>>>> copying, distribution or any action taken in reliance on it is prohibited
>>>>>>>>> and may be unlawful. If you received this communication in error please
>>>>>>>>> notify us immediately and destroy the original message.  Thank you.
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Ken Martin PhD
>>>>>>> Chairman & CFO
>>>>>>> Kitware Inc.
>>>>>>> 28 Corporate Drive
>>>>>>> Clifton Park NY 12065
>>>>>>> 518 371 3971
>>>>>>>
>>>>>>> This communication, including all attachments, contains confidential
>>>>>>> and legally privileged information, and it is intended only for the use of
>>>>>>> the addressee.  Access to this email by anyone else is unauthorized. If you
>>>>>>> are not the intended recipient, any disclosure, copying, distribution or
>>>>>>> any action taken in reliance on it is prohibited and may be unlawful. If
>>>>>>> you received this communication in error please notify us immediately and
>>>>>>> destroy the original message.  Thank you.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Ken Martin PhD
>>>>> Chairman & CFO
>>>>> Kitware Inc.
>>>>> 28 Corporate Drive
>>>>> Clifton Park NY 12065
>>>>> 518 371 3971 <(518)%20371-3971>
>>>>>
>>>>> This communication, including all attachments, contains confidential
>>>>> and legally privileged information, and it is intended only for the use of
>>>>> the addressee.  Access to this email by anyone else is unauthorized. If you
>>>>> are not the intended recipient, any disclosure, copying, distribution or
>>>>> any action taken in reliance on it is prohibited and may be unlawful. If
>>>>> you received this communication in error please notify us immediately and
>>>>> destroy the original message.  Thank you.
>>>>>
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://public.kitware.com/mailman/listinfo/paraview
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20170102/5a11558c/attachment.html>

More information about the ParaView mailing list