[Paraview] 3D with Nvidia glasses

[Gao]

Hi Aashish,

The monitor is Asus VG236H. Not sure about "vertical interlaced".

Gao


On 2016-10-12 11:02 AM, Aashish Chaudhary wrote:
> Is the monitor is vertical interlaced?
>
> - Aashish
>
> On Wed, Oct 12, 2016 at 1:55 PM Gao <gao at pztop.com 
> <mailto:gao at pztop.com>> wrote:
>
>     Hi Cory,
>
>     I just tried "Onboard DIN connector (with NVIDIA 3D ...)" and it's
>     still not showing 3D stereo.
>
>     My system is a Dell Precision workstation come with a Quadro 4000
>     video card (No DIN connection). The demo 3D test from Nvidia
>     Control Panel works fine so I think the driver is loaded correctly.
>
>     I just installed the new Paraview 5.2 RC1 and it does the same: No
>     3D but flickering.
>
>     I also tried other modes and none of them works.
>
>     Is there any special setting I need config in ParaView?
>
>     Thanks for the help.
>
>     Gao
>
>
>
>
>     On 2016-10-12 08:51 AM, Cory Quammen wrote:
>>     Hi Gao,
>>
>>     Attached is an image of the relevant NVIDIA Control Panel
>>     settings for our working ParaView stereo display setup. It looks
>>     like the main change from your setup is to change "Stereo -
>>     Display Mode" to "Onboard DIN connector (with NVIDIA 3D ...)".
>>
>>     For your reference, our system runs Windows 10 and has a Quadro
>>     M5000 and an ASUS VG248QE 24-inch Full HD display. We did not
>>     need the optional 3-pin DIN connector port that seems almost
>>     impossible to buy anywhere.
>>
>>     HTH,
>>     Cory
>>
>>     On Tue, Oct 11, 2016 at 3:17 PM, Gao <gao at pztop.com
>>     <mailto:gao at pztop.com>> wrote:
>>
>>         Hi all,
>>
>>         I am trying to make the stereo 3D working on Paraview but it
>>         doesn't work. I don't know what is the problem.
>>
>>         I got NVIDIA 3D VISION 2 glasses and set it up on my Windows
>>         10 PC. Installed the driver for the QUADRO 4000 card. Tested
>>         with the Nvidia Control Panel (version  8.1.1030.0) and the I
>>         can see the 3D demo through the glasses.
>>
>>         Then I downloaded a sample vtk file from here:
>>
>>         http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3Dtestfiles/vtk/rbc_001.vtk
>>
>>         I changed some setting on Nvidia Control Panel:
>>         Manage 3D setting:
>>          Stereo - Display mode : Generic active stereo (with NVIDIA
>>         3D Vision)
>>          Stereo -Enable: On
>>          Stereo -Swap eyes: Off
>>
>>         Now I run paraview with：
>>         paraview.exe --stereo --stereo-type="Crystal Eyes"
>>
>>         Then I open the vtk file I downloaded. I don't see 3D, and
>>         the image is flickering. But the emitter green light is ON.
>>
>>         Can someone help me to get this 3D display going?
>>
>>         Thanks.
>>
>>         Gao
>>
>>
>>         _______________________________________________
>>         Powered by www.kitware.com <http://www.kitware.com>
>>
>>         Visit other Kitware open-source projects at
>>         http://www.kitware.com/opensource/opensource.html
>>
>>         Please keep messages on-topic and check the ParaView Wiki at:
>>         http://paraview.org/Wiki/ParaView
>>
>>         Search the list archives at:
>>         http://markmail.org/search/?q=ParaView
>>
>>         Follow this link to subscribe/unsubscribe:
>>         http://public.kitware.com/mailman/listinfo/paraview
>>
>>
>>
>>
>>     -- 
>>     Cory Quammen
>>     Staff R&D Engineer
>>     Kitware, Inc.
>
>     _______________________________________________
>     Powered by www.kitware.com <http://www.kitware.com>
>
>     Visit other Kitware open-source projects at
>     http://www.kitware.com/opensource/opensource.html
>
>     Please keep messages on-topic and check the ParaView Wiki at:
>     http://paraview.org/Wiki/ParaView
>
>     Search the list archives at: http://markmail.org/search/?q=ParaView
>
>     Follow this link to subscribe/unsubscribe:
>     http://public.kitware.com/mailman/listinfo/paraview
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20161012/47066012/attachment.html>