[Paraview] 3D with Nvidia glasses

[Gao]

Hi Cory,

I just tried "Onboard DIN connector (with NVIDIA 3D ...)" and it's still 
not showing 3D stereo.

My system is a Dell Precision workstation come with a Quadro 4000 video 
card (No DIN connection). The demo 3D test from Nvidia Control Panel 
works fine so I think the driver is loaded correctly.

I just installed the new Paraview 5.2 RC1 and it does the same: No 3D 
but flickering.

I also tried other modes and none of them works.

Is there any special setting I need config in ParaView?

Thanks for the help.

Gao




On 2016-10-12 08:51 AM, Cory Quammen wrote:
> Hi Gao,
>
> Attached is an image of the relevant NVIDIA Control Panel settings for 
> our working ParaView stereo display setup. It looks like the main 
> change from your setup is to change "Stereo - Display Mode" to 
> "Onboard DIN connector (with NVIDIA 3D ...)".
>
> For your reference, our system runs Windows 10 and has a Quadro M5000 
> and an ASUS VG248QE 24-inch Full HD display. We did not need the 
> optional 3-pin DIN connector port that seems almost impossible to buy 
> anywhere.
>
> HTH,
> Cory
>
> On Tue, Oct 11, 2016 at 3:17 PM, Gao <gao at pztop.com 
> <mailto:gao at pztop.com>> wrote:
>
>     Hi all,
>
>     I am trying to make the stereo 3D working on Paraview but it
>     doesn't work. I don't know what is the problem.
>
>     I got NVIDIA 3D VISION 2 glasses and set it up on my Windows 10
>     PC. Installed the driver for the QUADRO 4000 card. Tested with the
>     Nvidia Control Panel (version  8.1.1030.0) and the I can see the
>     3D demo through the glasses.
>
>     Then I downloaded a sample vtk file from here:
>
>     http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3Dtestfiles/vtk/rbc_001.vtk
>     <http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3Dtestfiles/vtk/rbc_001.vtk>
>
>     I changed some setting on Nvidia Control Panel:
>     Manage 3D setting:
>      Stereo - Display mode : Generic active stereo (with NVIDIA 3D Vision)
>      Stereo -Enable: On
>      Stereo -Swap eyes: Off
>
>     Now I run paraview with：
>     paraview.exe --stereo --stereo-type="Crystal Eyes"
>
>     Then I open the vtk file I downloaded. I don't see 3D, and the
>     image is flickering. But the emitter green light is ON.
>
>     Can someone help me to get this 3D display going?
>
>     Thanks.
>
>     Gao
>
>
>     _______________________________________________
>     Powered by www.kitware.com <http://www.kitware.com>
>
>     Visit other Kitware open-source projects at
>     http://www.kitware.com/opensource/opensource.html
>     <http://www.kitware.com/opensource/opensource.html>
>
>     Please keep messages on-topic and check the ParaView Wiki at:
>     http://paraview.org/Wiki/ParaView <http://paraview.org/Wiki/ParaView>
>
>     Search the list archives at:
>     http://markmail.org/search/?q=ParaView
>     <http://markmail.org/search/?q=ParaView>
>
>     Follow this link to subscribe/unsubscribe:
>     http://public.kitware.com/mailman/listinfo/paraview
>     <http://public.kitware.com/mailman/listinfo/paraview>
>
>
>
>
> -- 
> Cory Quammen
> Staff R&D Engineer
> Kitware, Inc.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20161012/022fc0b4/attachment.html>