[Paraview] question-filter

Mon Mar 14 10:09:12 EDT 2016

Hi Islem,

Sorry for the late reply. I've been swamped lately.

Thank you for the detailed explanation of what you are doing. That really
helps us narrow down what might be going on.

I'm not sure what the problem is. I have a simple pipeline example where
this works:

Sphere source -> Delaunay3D -> Python Annotation filter

The Delaunay3D filter produces an unstructured grid, from which I am able
to get the volumes.

I suspect ParaView readds your OpenFOAM data set as a multiblock data set?
Could you look at the Info panel and report it's Type. It should be the
first item under the "Statistics" sub-section.

If it is indeed a multiblock data set, please try this:

Place a MergeBlocks filter between your Threshold filter and Python
Annotation filter.

Please see if that works. If it does, we'll move on to multiplying the
volume by the water fraction.

Thanks,
Cory

On Tue, Mar 8, 2016 at 6:35 AM, Megdich Islem <megdich_islem at yahoo.fr>
wrote:

> Hi cory,
>
> I was working on the case of water computation in the desired domain
> taking into account your suggestions. I attached here some pictures that
> helps to figure out how I did it. I created the domain in which I want to
> compute the volume of water using the clip filter and then I thresolded the
> clipped domain to  contain only the cells ranging between 0.5 and 1 of
> alpha water and I ended up with the domain illustrated in picture 3, and
> then I applied the annotation filter setting up the array association to
> Point Data and the expression to algs.sum(algs.volume(inputs[0])), but I
> ended up with an error in the render view and output message stating that
> AttributeError:'None Type' object has no attribute 'GetCellData'. I
> couldn't understand the reason, I tried  all the array Association options,
> I got the same error, except for the Row Data, I got this error:
> AttributeError:'NoneType' object has no attribute 'GetNumberOfArrays'.
> (picture 4 and 5).
>
> I googled that link
>
> paraview.simple.PythonAnnotation — ParaView/Python 5.0.1-RC1-193-gad11756
> documentation
> <http://www.paraview.org/ParaView/Doc/Nightly/www/py-doc/paraview.simple.PythonAnnotation.html>
>
>
>
>
>
>
>
> paraview.simple.PythonAnnotation — ParaView/Python 5.0.1-RC1-193-gad11756
> documentation
> <http://www.paraview.org/ParaView/Doc/Nightly/www/py-doc/paraview.simple.PythonAnnotation.html>
> Docs » Index paraview.simple.PythonAnnotation
> paraview.simple.PythonAnnotation paraview.simple.PythonAnnotation(*input,
> **params) This filter uses Python to calculate an expression. It
> Afficher sur *www.paraview.org*
> <http://www.paraview.org/ParaView/Doc/Nightly/www/py-doc/paraview.simple.PythonAnnotation.html>
> Aperçu par Yahoo
>
>
> It  says that I need to set the input which I didn't know how to do it
> since it doesn't ask for any input in the Properties Panel. Any solutions
> for this problem ??
>
> In this expression algs.sum(algs.volume(inputs[*0*])), what does the *0 * stands
> for ?
>
> I think if I threshold the domain in which I want to calculate the volume
> of water, let's say between 0.5 and 1, then I will end up by inaccurate
> water volume because I am including volume of air in the computed volume
> and on the other hand I am ignoring the cells that contain less than 0.5 of
> water.
>
> That's why, I am looking for an algorithm that multiply every cell
> containing water by the coefficient alpha water. You find attached in
> picture 6, an example of how I want to calculate the water volume. I don't
> know how to program it.
>
> Any helps concerning this matter will be very much appreciated.
> Regards,
> Islem Megdiche
> PhD student
>
>
> Le Mardi 23 février 2016 14h21, Cory Quammen <cory.quammen at kitware.com> a
> écrit :
>
>
> Hi Islem,
>
> Please reply-all to keep the discussion on the list so that others may
> benefit from the discussion.
>
> First, is there a data array that describes whether a volume element
> in your mesh contains water or some other element? If so, you can use
> the Threshold filter under the Filters -> Alphabetical -> Threshold
> menu to select only the elements representing water. You will have to
> set the minimum and maximum to the value that represents water, then
> click Apply.
>
> HTH,
> Cory
>
> On Mon, Feb 22, 2016 at 1:14 PM, Megdich Islem <megdich_islem at yahoo.fr>
> wrote:
> > Hi again,
> >
> > Thank you for your suggestion, Could you please explain how to do the
> first
> > step because I am not the one who created the picture I sent you before.
> >
> > Regards,
> > Islem
> >
> >
> > Le Lundi 22 février 2016 16h45, Megdich Islem <megdich_islem at yahoo.fr> a
> > écrit :
> >
> >
> > Thank you for your reply. I will try your suggestions.
> >
> > Regards,
> > Islem
> >
> >
> > Le Lundi 22 février 2016 14h22, Cory Quammen <cory.quammen at kitware.com>
> a
> > écrit :
> >
> >
> > Islem,
> >
> > There are likely two steps:
> >
> > 1). Threshold your volume to identify only the water-containing cells.
> > It looks like you have a way to do this already?
> >
> > 2). Compute the volumes of the water-containing cells and summing them
> up.
> >
> > You can use the Threshold filter to do number 1 if you have a material
> > code in the cell data. To compute the volume of the cells, add a
> > Python Annotation filter to the Threshold filter. Set the Expression
> > to
> >
> > algs.sum(algs.volume(inputs[0]))
> >
> > This uses the numpy-like interface in the Python layer to compute the
> > volumes of the cells and sum them all up. The Python Annotation filter
> > should display the volume with a text label in your renderer.
> >
> > Hope this helps,
> > Cory
> >
> > On Mon, Feb 22, 2016 at 9:09 AM, Megdich Islem <megdich_islem at yahoo.fr>
> > wrote:
> >> Hi Cory,
> >>
> >> Thank you very much for your prompt reply. I've attached here a picture
> >> that
> >> illustrates my problem. I am working on the break of bund walls and I
> want
> >> to compute the volume of water that overtops the bund wall (walls
> >> surrounding storage tank), after the  solution reaches the steady state.
> >>
> >> Regards,
> >> Islem
> >>
> >>
> >> Le Lundi 22 février 2016 13h53, Cory Quammen <cory.quammen at kitware.com>
> a
> >> écrit :
> >>
> >>
> >> Hi Islem,
> >>
> >> This is the place to ask ParaView questions! There is some activity on
> >> StackOverflow, but most people ask questions on this mailing list.
> >>
> >> Could you clarify what you want to compute? Do you just want to subset
> >> a volume mesh and display the results over time? Do you want to
> >> compute one quantity and display it as a graph over time? Do you want
> >> to compute a single number from a time series data set?
> >>
> >> Thanks,
> >> Cory
> >>
> >> On Mon, Feb 22, 2016 at 8:48 AM, Megdich Islem <megdich_islem at yahoo.fr>
> >> wrote:
> >>> Hello,
> >>>
> >>> I am new to paraview, and I didn't find a forum under paraview website
> to
> >>> ask my question.
> >>> My question is is there any filter in paraview that lets to compute the
> >>> evolution of a quantity within a specific volume of the mesh.
> >>>
> >>> Regards,
> >>> Islem
> >>>
> >>> _______________________________________________
> >>> Powered by www.kitware.com
> >>>
> >>> Visit other Kitware open-source projects at
> >>> http://www.kitware.com/opensource/opensource.html
> >>>
> >>> Please keep messages on-topic and check the ParaView Wiki at:
> >>> http://paraview.org/Wiki/ParaView
> >>>
> >>> Search the list archives at: http://markmail.org/search/?q=ParaView
> >>>
> >>> Follow this link to subscribe/unsubscribe:
> >>> http://public.kitware.com/mailman/listinfo/paraview
> >>
> >>>
> >>
> >>
> >>
> >> --
> >> Cory Quammen
> >> R&D Engineer
> >> Kitware, Inc.
>
> >
> >>
> >>
> >>
> >
> >
> >
> > --
> > Cory Quammen
> > R&D Engineer
> > Kitware, Inc.
> >
> >
> >
> >
>
>
>
> --
> Cory Quammen
> R&D Engineer
> Kitware, Inc.
>
>
>

-- 
Cory Quammen
R&D Engineer
Kitware, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20160314/29db63b7/attachment.html>