[Paraview] [Non-DoD Source] Re: 5.1.2/OpenGL2 issue
Utkarsh Ayachit
utkarsh.ayachit at kitware.com
Wed Aug 24 10:23:40 EDT 2016
Dave,
Is it possible to do a debug build and see which call is failing?
Utkarsh
On Wed, Aug 24, 2016 at 10:20 AM, Dave Pratt <david.pratt.ctr at dren.mil> wrote:
>
> Utkarsh,
> We are running VirtualGL 2.3.3 and TurboVNC 1.2.1 on all systems and
> Paraview is executed under a vglrun environment. Paraview 5.0.1 has been
> running on this system for quite some time. Version 5.1.2 throws a
> segfault at
>
> [VGL] WARNING: The OpenGL rendering context obtained on X display
> [VGL] :0.0 is indirect, which may cause performance to suffer.
> [VGL] If :0.0 is a local X display, then the framebuffer device
> [VGL] permissions may be set incorrectly.
>
> Program received signal SIGSEGV, Segmentation fault.
> 0x0000000000000000 in ?? ()
> (gdb) where
> #0 0x0000000000000000 in ?? ()
> #1 0x00002aaaafd4db69 in vtkOpenGLRenderWindow::OpenGLInitState() ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkRenderingOpenGL2-pv5.1.so.1
> #2 0x00002aaaafd4e86c in
> vtkOpenGLRenderWindow::CreateHardwareOffScreenWindow(int, int) ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkRenderingOpenGL2-pv5.1.so.1
> #3 0x00002aaaafdf1515 in vtkXOpenGLRenderWindow::CreateOffScreenWindow(int,
> int) ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkRenderingOpenGL2-pv5.1.so.1
> #4 0x00002aaaafd4d0e5 in vtkOpenGLRenderWindow::SupportsOpenGL() ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkRenderingOpenGL2-pv5.1.so.1
> #5 0x00002aaab938b3b8 in vtkPVDisplayInformation::SupportsOpenGLLocally()
> ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkPVClientServerCoreRendering-pv5.1.so.1
> #6 0x00002aaab938b3f4 in
> vtkPVDisplayInformation::CopyFromObject(vtkObject*) ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkPVClientServerCoreRendering-pv5.1.so.1
> #7 0x00002aaaadf6723b in
> vtkPVSessionCore::GatherInformationInternal(vtkPVInformation*, unsigned int)
> ()
> from
> /p/app/DAAC/paraview/5.1.2/lib/paraview-5.1/libvtkPVServerImplementationCore-pv5.1.so.1
> ...
>
>
>
>
>
> On 08/24/16 08:56 AM, Utkarsh Ayachit wrote:
>
> No, that's not it. Hopefully someone with more knowledge on this than
> me can chime in at some point. I'm told that VirtualGL < 2.3.1 did not
> forward the glXCreateContextARB calls we need for creating OpenGL 3.2
> context needed by ParaView (OpenGL2 backend).
>
> To update my know how about it in the mean time, I read up a bit on
> TightVNC and VGL [1,2]. So, is your setup intended to use VirtualGL?
> If so, shouldn't you be running `vglrun paraview`? I believe that's
> the [VGL] warning messages are all about, aren't they?
>
> Utkarsh
>
> [1] http://www.virtualgl.org/vgldoc/2_1_1/#hd009
> [2]
> https://hpc.nrel.gov/users/software/visualization-analytics/virtualgl-turbovnc
>
> On Wed, Aug 24, 2016 at 9:36 AM, Angelini, Richard C (Rick) CIV USARMY
> RDECOM ARL (US) <richard.c.angelini.civ at mail.mil> wrote:
>
> Yes - this is an OpenGL2 build.
>
> Is this the information on TurboVNC that you’re looking for?
>
> server glx vendor string: VirtualGL
> server glx version string: 1.4
>
> ________________________________
> Rick Angelini
> USArmy Research Laboratory
> CISD/HPC Architectures Team
> Phone: 410-278-6266
>
>
>
>
> -----Original Message-----
> From: Utkarsh Ayachit <utkarsh.ayachit at kitware.com>
> Date: Wednesday, August 24, 2016 at 8:57 AM
> To: Rick Angelini <Richard.C.Angelini.CIV at mail.mil>
> Cc: ParaView <paraview at paraview.org>
> Subject: [Non-DoD Source] Re: [Paraview] 5.1.2/OpenGL2 issue
>
> All active links contained in this email were disabled. Please verify the
> identity of the sender, and confirm the authenticity of all links
> contained within the message prior to copying and pasting the address to a
> Web browser.
>
>
>
>
> ----
>
> Rick,
>
> I am assuming with is with VTK_RENDERING_BACKEND set to OpenGL2.
>
> Do you know what VirtualGL version is being used?
>
> On Tue, Aug 23, 2016 at 2:56 PM, Angelini, Richard C (Rick) CIV USARMY
> RDECOM ARL (US) <richard.c.angelini.civ at mail.mil> wrote:
>
> We are trying to build/run ParaView 5.1.2 on a particular HPC system with
> graphics nodes via TurboVNC. ParaView 5.0.1 build/runs fine in this
> configuration. ParaView 5.1.2 compiles fine (using identical build
> configuration used to build 5.0.1) - however the GUI fails at execution.
> I’m not sure how to debug it any further. It *appears* that 5.1.2 is
> maybe doing some additional environment querying that might be causing
> this
> failure?
>
>
> When I try to run 5.1.2, I get this error:
>
> g01 > paraview
> [VGL] WARNING: The OpenGL rendering context obtained on X display
> [VGL] :0.0 is indirect, which may cause performance to suffer.
> [VGL] If :0.0 is a local X display, then the framebuffer device
> [VGL] permissions may be set incorrectly.
> Segmentation fault
>
>
> The particular message about indirect rendering – if I run glxinfo,
> direct
> rendering is set to YES.
>
> g01 > glxinfo
> name of display: :5.0
> display: :5 screen: 0
> direct rendering: Yes
> server glx vendor string: VirtualGL
> server glx version string: 1.4
> [deleted stuff]
> OpenGL vendor string: NVIDIA Corporation
> OpenGL renderer string: Tesla K40m/PCIe/SSE2
> OpenGL core profile version string: 4.3.0 NVIDIA 340.93
>
>
>
> ________________________________
> Rick Angelini
> USArmy Research Laboratory
> CISD/HPC Architectures Team
> Phone: 410-278-6266
>
> _______________________________________________
> Powered by Caution-www.kitware.com
>
> Visit other Kitware open-source projects at
> Caution-http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> Caution-http://paraview.org/Wiki/ParaView
>
> Search the list archives at:
> Caution-http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> Caution-http://public.kitware.com/mailman/listinfo/paraview
>
>
> --
>
> Dave Pratt
> Sr. Software Developer
> Secure Mission Solutions, Inc.
> a PARSONS Company
>
> 612/708-2284 (Cell)
> David.Pratt.ctr at dren.hpc.mil
> depratt at securemissionsolutions.com
> 1392073228 at jabber.dren.net
>
More information about the ParaView
mailing list