[Paraview] PCL Plugin

[Eric Younkin - NOAA Federal]

Casey,

Did you have a chance to look at this?  What errors would you expect to see
using Paraview and QT5?

Thanks,
Eric

On Wed, Jul 15, 2015 at 11:02 PM, Eric Younkin - NOAA Federal <
eric.g.younkin at noaa.gov> wrote:

> Casey,
>
> I managed to build from source, Paraview 4.3.1 in VS2013.  It looks like
> my problem had to do with ZLIB and how I set the cmake parameters.  Also
> had to change the Paraview project subsystem type from windows to console.
> This doesn't make a whole lot of sense to me, but it did get it working.
>
> Now when I run Paraview.exe, I get the following output messages on
> startup:
>
> QWindowsWindow::setGeometryDp: Unable to set geometry 1920x1017+4+23 on
> QWidgetWindow/'pqClientMainWindowWindow'. Resulting geometry: 1370x753+4+23
> (frame: 4, 23, 4, 4, custom margin: 0, 0, 0, 0, minimum size: 471x407,
> maximum size: 16777215x16777215). (qwindowswindow.cpp:1323, void __cdecl
> QWindowsWindow::setGeometryDp(const class QRect &))
>
> Is this something I should be concerned about?  Some kind of resolution
> issue?  I haven't seen it on the install I have using the binaries from the
> Paraview site.
>
> Thanks,
> Eric
>
> On Tue, Jul 14, 2015 at 1:39 PM, Casey Goodlett <
> casey.goodlett at kitware.com> wrote:
>
>> Luca,
>>
>> You should be able to use a more recent ParaView.  If you run across
>> problems with the build you can ask here.  It should work, but you may
>> encounter some problems.  I believe I tested as recently as paraview 4.2
>>
>> On Tue, Jul 14, 2015 at 7:00 AM, Luca Morandini <lmorandini at ieee.org>
>> wrote:
>>
>>> On 10/07/15 00:39, Casey Goodlett wrote:
>>>
>>>> Hi Eric,
>>>>
>>>> Thanks for your interest in the PCL plugin, I have used the plugin more
>>>> recently
>>>> than PCL 1.5.1.  I last tested with ParaView 4.1 and PCL master (from
>>>> around
>>>> February of this year).
>>>>
>>>
>>> Apologies for the interruption, but I tried to build the PCL plugin
>>> following the instructions [1] against an old version of ParaView, and run
>>> into problems (see my other post today),  but then I noticed this thread
>>> and realized that I may try to build it against a more recent version of
>>> ParaView: will it work following the dame instructions, as provided by  or
>>> some extra care is needed?
>>>
>>> Regards,
>>>
>>> [1]
>>> http://www.paraview.org/Wiki/ParaView/PCL_Plugin/Download_And_Build_Instructions
>>>
>>> Luca Morandini
>>> Data Architect - AURIN project
>>> Melbourne eResearch Group
>>> Department of Computing and Information Systems
>>> University of Melbourne
>>> Tel. +61 03 903 58 380
>>> Skype: lmorandini
>>>
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://public.kitware.com/mailman/listinfo/paraview
>>>
>>
>>
>>
>> --
>> Casey B Goodlett, PhD
>> Technical Leader
>> Kitware, Inc. - North Carolina Office
>> http://www.kitware.com
>> (919) 969-6990 x310
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>>
>
>
> --
> Eric Younkin LTJG/NOAA
> HSTP Liaison - East
> Marine Operations Center - Atlantic
> 439 W York St
> Norfolk, VA 23510
> Cell: 828-331-8197
>



-- 
Eric Younkin LTJG/NOAA
HSTP Liaison - East
Marine Operations Center - Atlantic
439 W York St
Norfolk, VA 23510
Cell: 828-331-8197
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150720/ec147e14/attachment.html>