[Paraview] Impossible to see a movement.

Fri Jul 10 10:39:56 EDT 2015

Hi Amel,

I followed the discussion between Utkarsh and you on this topic. Could 
you share the rmed file from Code-Aster? The download from your google 
drive seems to be restricted to specific email addresses.

Michael

Am 10.07.2015 um 09:27 schrieb aka at alphanet.ch:
> Utarsh,
> Thank you for your reply, I will try to do what you say this week-end.
> Another fact is a few strange : when I opened my rmed file with Paraview
> (using for this the
> http://www.alneos.com/telechargement/paraview-avec-med software), I
> simply could clic on the "Wrap" button (or a name near that) and, when I
> clic "Play" after I can see the movement...
> This same "Wrap" button is disabled (for this simualtion) in my
> Salome-Meca Paraview module, with which I work, and I don't understand
> why...
> Amel
>
> Utkarsh Ayachit writes:
>> Amel,
>> What's the Result_DEPL array? Is that displacement? Assuming that, I
>> applied two calculators: first to convert the Result_DEPL array to a 3
>> component vector and the second to translate the coordinate positions
>> using
>> the vector computed by the previous one. If the Result_DEPL changes in
>> your
>> dataset over time, you'll see the movement.
>> State file attached.
>> Utarsh
>> On Thu, Jul 9, 2015 at 12:19 AM A. Kapetanovic <aka at alphanet.ch> wrote:
>>> Utkarsh,
>>> I did something on google drive, I shared the file with your e-mail and
>>> here you have the url :
>>> https://drive.google.com/open?id=0B_ag1ge2Wc1nSS10M1JYampTb00
>>> I hope all is OK like this, it's the first time I use google drive. Say
>>> me please if something misses.
>>> Regards   :)
>>>
>>> Le 08. 07. 15 22:47, Utkarsh Ayachit a écrit :
>>> > Amel,
>>> >
>>> > The dataset didn't come through, I am afraid. Is it may be easier to
>>> > upload it somewhere eg. dropbox/google drive?
>>> >
>>> > Utkarsh
>>> >
>>> > On Wed, Jul 8, 2015 at 3:54 PM A. Kapetanovic <aka at alphanet.ch
>>> > <mailto:aka at alphanet.ch>> wrote:
>>> >
>>> >     WARNING: this mail was modified in transit:
>>> >         defanged (renamed/protected) 07.hdf because file type unknown.
>>> >     Rename defang-0.binary to 07.hdf if you want to access the file
>>> anyway
>>> >
>>> >     More details at:
>>> >     http://www.alphanet.ch/alphanet/anti-spam.html
>>> >     Hi,
>>> >
>>> >     Thanks for your reply.
>>> >
>>> >     Of course I have data to share. The rmed result comressed file
>>> is too
>>> >     big (35 MB), so I send here the hdf and comm files, you only
>>> need to
>>> >     compute the (3) meshes and to run the simulation to have this rmed
>>> file.
>>> >
>>> >     Say me if you need something else, I hope all is clear enough like
>>> >     this   :)
>>> >
>>> >     Amel
>>> >
>>> >
>>> >     Le 08. 07. 15 15:44, Utkarsh Ayachit a écrit :
>>> >      > Do you have a sample dataset to share? That'll make this
>>> easier.
>>> >      >
>>> >      > Typically, movement comes from one of the following:
>>> >      > 1. Readers: the reader itself translates the points in the grid
>>> >     as time
>>> >      > changes
>>> >      > 2. Filters: if the grid doesn't change but has attributes that
>>> >     indicate
>>> >      > the displacement, one can apply a filter to transform the grid
>>> using
>>> >      > those displacement vectors.
>>> >      >
>>> >      > Utkarsh
>>> >      >
>>> >      > On Wed, Jul 8, 2015 at 3:59 AM <aka at alphanet.ch
>>> >     <mailto:aka at alphanet.ch>
>>> >      > <mailto:aka at alphanet.ch <mailto:aka at alphanet.ch>>> wrote:
>>> >      >
>>> >      >     Hi,
>>> >      >
>>> >      >     I am using Paraview with Salome-Meca + Code_Aster and I
>>> have
>>> >     e little
>>> >      >     problem : impossible to see the movement of a part that is
>>> >     moving.
>>> >      >
>>> >      >     In fact the simulation is very simple : I have 2 cylinders,
>>> >     one is
>>> >      >     fixed by
>>> >      >     one face and the other have a movement on a face. The
>>> simulation
>>> >      >     converges
>>> >      >     and when I open the mmed or rmed file (result) with
>>> Paraview,
>>> >      >     impossible to
>>> >      >     see any movement even if I clic "play".
>>> >      >
>>> >      >     Simply nothing happens.
>>> >      >
>>> >      >     Can please someone help me ?
>>> >      >
>>> >      >     Best regards,
>>> >      >
>>> >      >     Amka
>>> >      >     _______________________________________________
>>> >      >     Powered by www.kitware.com <http://www.kitware.com>
>>> >     <http://www.kitware.com>
>>> >      >
>>> >      >     Visit other Kitware open-source projects at
>>> >      > http://www.kitware.com/opensource/opensource.html
>>> >      >
>>> >      >     Please keep messages on-topic and check the ParaView
>>> Wiki at:
>>> >      > http://paraview.org/Wiki/ParaView
>>> >      >
>>> >      >     Search the list archives at:
>>> >     http://markmail.org/search/?q=ParaView
>>> >      >
>>> >      >     Follow this link to subscribe/unsubscribe:
>>> >      > http://public.kitware.com/mailman/listinfo/paraview
>>> >      >
>>> >
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/paraview

-- 
  Michael Grabietz

  IMG - Ingenieurbuero Michael Grabietz
  Stauferring 56
  97941 Tauberbischofsheim
  Germany

  Fon: +49 9341 89 66 70
  Fax: +49 9341 89 66 71

  michael.grabietz at img-online.de
  www.img-online.de