[Paraview] problem building ParaView Examples
Jeff Becker
jeffrey.c.becker at nasa.gov
Tue Jan 13 13:20:45 EST 2015
Salut Sebastien!
On 01/13/2015 07:45 AM, Sebastien Jourdain wrote:
> Hi Jeff,
>
> looking at your test here:
> https://open.cdash.org/viewTest.php?onlyfailed&buildid=3650142
>
> It seems much better. Some of the tests still fail as another window
> went on top (terminal or web browser).
> And some other failures seems to be related to a zoom factor which was
> different.
>
> Base on what I've seen, your ParaView seems OK.
> Although, I'm wondering if you have the proper set of OpenGL drivers.
>
> That test show for example some differences in term of quality.
> => https://open.cdash.org/testDetails.php?test=306359279&build=3650142
>
> But as far as I can tell, you seems to be all set.
Awesome. Thanks for looking at my test results.
-jeff
>
> Seb
>
> On Mon, Jan 12, 2015 at 5:11 PM, Jeff Becker
> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>
> Resubmitted "ctest -D Experimental"
>
>
> On 01/12/2015 03:22 PM, Jeff Becker wrote:
>> On 01/12/2015 03:18 PM, Sebastien Jourdain wrote:
>>> Hum,
>>>
>>> That should not really matter root or no-root. But since lot of
>>> test perform some rendering operations and that we capture that
>>> section of the screen, we often (on wrongly setup dashboard) see
>>> screensaver capture instead of the user desktop where the
>>> expected rendering is actually happening. (Hence my previous
>>> comment) Such error provide false positive error.
>>>
>>> And looking at several tests here:
>>> https://open.cdash.org/viewTest.php?onlyfailed&buildid=3650082
>>> I've notice the same captured image.
>>>
>>> When you run "ctest -D Experimental", do you see flashing
>>> windows poping up with that image?
>>> Or do they seems to be somewhat valid?
>>> If you try again, try to see if you can disable the screensaver
>>> altogether.
>>
>> OK - Now I think I know what happened. I started the test and
>> went to lunch. Hence my screen locked, and that may have
>> interfered. I'll run it again and watch it. Thanks.
>>
>> -jeff
>>
>>>
>>> Seb
>>>
>>>
>>> On Mon, Jan 12, 2015 at 3:51 PM, Jeff Becker
>>> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>>
>>> wrote:
>>>
>>> On 01/12/2015 02:38 PM, Sebastien Jourdain wrote:
>>>> Do you know if that picture come from your screensaver or
>>>> anything else?
>>>> It seems to be the picture that get captured regardless of
>>>> the test that ran and failed.
>>>>
>>> I don't recognize it.
>>>
>>> I was thinking that it might be a permission issue. I could
>>> try running the tests as root.... Would that help? Thanks.
>>>
>>> -jeff
>>>
>>>
>>>>
>>>>
>>>> On Mon, Jan 12, 2015 at 2:46 PM, Jeff Becker
>>>> <jeffrey.c.becker at nasa.gov
>>>> <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>>>>
>>>> On 01/12/2015 01:38 PM, Utkarsh Ayachit wrote:
>>>>
>>>> That's more from before! :).
>>>>
>>>>
>>>> I assume you meant more "than" before?
>>>>
>>>> Anything funky about the X configuration?
>>>>
>>>>
>>>> What should I look for?
>>>>
>>>> Looks like the framebuffer grabs end up capturing
>>>> ghost images.
>>>>
>>>>
>>>> -jeff
>>>>
>>>>
>>>> Utkarsh
>>>>
>>>> On Mon, Jan 12, 2015 at 1:28 PM, Jeff Becker
>>>> <jeffrey.c.becker at nasa.gov
>>>> <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>>>>
>>>> On 01/12/2015 11:39 AM, Utkarsh Ayachit wrote:
>>>>
>>>> Mind doing a "ctest -D Experimental"?
>>>> That'll submit the test results
>>>> to the ParaView dashboard [1] and will
>>>> provide use more information as
>>>> to why those tests failed.
>>>>
>>>>
>>>> Done. 996 tests failed (see website below). Thanks.
>>>>
>>>> -jeff
>>>>
>>>> [1]
>>>> https://open.cdash.org/index.php?project=ParaView
>>>>
>>>> On Mon, Jan 12, 2015 at 11:37 AM, Jeff
>>>> Becker <jeffrey.c.becker at nasa.gov
>>>> <mailto:jeffrey.c.becker at nasa.gov>>
>>>> wrote:
>>>>
>>>> On 01/12/2015 10:47 AM, Jeff Becker wrote:
>>>>
>>>> On 01/10/2015 04:39 PM, Utkarsh Ayachit
>>>> wrote:
>>>>
>>>> Not sure what's the issue. I tested out
>>>> in my build and seems to work as
>>>> expected. Mind attaching your
>>>> CMakeCache.txt file? Did you by any chance
>>>> turn on PARAVIEW_USE_UNIFIED_BINDINGS
>>>> cmake flag?
>>>>
>>>>
>>>> Yes. I turned that off, and now it
>>>> builds fine. Thanks.
>>>>
>>>>
>>>> I tried 'make test' and got:
>>>>
>>>> 97% tests passed, 47 tests failed out
>>>> of 1499
>>>>
>>>> Failed tests listed below. Do I need to
>>>> worry about these, and if so, how
>>>> to
>>>> fix?
>>>>
>>>> Thanks.
>>>>
>>>> -jeff
>>>>
>>>> The following tests FAILED:
>>>> 1 - pv.TestDevelopmentInstall
>>>> (Failed)
>>>> 73 -
>>>> vtkPVVTKExtensionsDefault-HeaderTest
>>>> (Failed)
>>>> 688 -
>>>> vtkIONetCDFPython-NetCDFCF2DBounds (Failed)
>>>> 779 -
>>>> vtkPVServerManagerDefaultPython-MultiView
>>>> (Failed)
>>>> 786 -
>>>> vtkPVServerManagerDefaultPython-SymmetricMultiView
>>>> (Failed)
>>>> 1026 -
>>>> vtkRenderingVolumeCxx-TestGPUVolumeRayCastMapperWindowLevel
>>>> (Failed)
>>>> 1103 - pv.FileSeries (Failed)
>>>> 1104 - pv.HistogramSelection (Failed)
>>>> 1119 - pv.FindDataDialog (Failed)
>>>> 1136 - pv.AnimatePipelineTime
>>>> (Failed)
>>>> 1140 - pv.CameraLink (Failed)
>>>> 1142 - pv.CheckableHeader (Failed)
>>>> 1165 - pv.FFTOverTime (Failed)
>>>> 1178 - pv.NormalGlyphs (Failed)
>>>> 1186 - pv.PlotOverTimeAutoApply
>>>> (Failed)
>>>> 1211 - pv.TemporalInterpolator
>>>> (Failed)
>>>> 1218 - pv.UndoRedo2 (Failed)
>>>> 1230 - pv.SelectionLabels (Failed)
>>>> 1234 -
>>>> pv.TraceSupplementalProxiesFully (Failed)
>>>> 1252 - pvcs.CameraLink (Failed)
>>>> 1254 - pvcs.CheckableHeader (Failed)
>>>> 1275 - pvcs.FFTOverTime (Failed)
>>>> 1279 - pvcs.ImageVolumeRendering
>>>> (Failed)
>>>> 1293 - pvcs.PlotOverTimeAutoApply
>>>> (Failed)
>>>> 1301 - pvcs.PropertyLink (Failed)
>>>> 1317 - pvcs.TensorGlyph (Failed)
>>>> 1318 - pvcs.TemporalInterpolator
>>>> (Failed)
>>>> 1325 - pvcs.UndoRedo2 (Failed)
>>>> 1340 -
>>>> pvcs.TraceSupplementalProxiesFully (Failed)
>>>> 1346 - pvcs.HistogramSelection
>>>> (Failed)
>>>> 1351 -
>>>> pvcs.NonlinearSubdivisionDisplay (Failed)
>>>> 1360 - pvcs.FindDataDialog (Failed)
>>>> 1376 - pvcrs.CameraLink (Failed)
>>>> 1378 - pvcrs.CheckableHeader (Failed)
>>>> 1384 - pvcrs.ComparativeVisPanel
>>>> (Failed)
>>>> 1415 - pvcrs.PropertyLink (Failed)
>>>> 1418 -
>>>> pvcrs.RepresentationSelector (Failed)
>>>> 1420 - pvcrs.SaveCSV (Failed)
>>>> 1422 - pvcrs.SimpleInteraction
>>>> (Failed)
>>>> 1424 - pvcrs.SliceAlongPolyline
>>>> (Failed)
>>>> 1426 - pvcrs.SpreadSheet2 (Failed)
>>>> 1430 - pvcrs.TabbedViews (Failed)
>>>> 1432 - pvcrs.TemporalInterpolator
>>>> (Failed)
>>>> 1439 - pvcrs.UndoRedo2 (Failed)
>>>> 1453 -
>>>> pvcrs.TraceSupplementalProxiesFully
>>>> (Failed)
>>>> 1458 - pvcrs.HistogramSelection
>>>> (Failed)
>>>> 1469 - pvcrs.FindDataDialog (Failed)
>>>> Errors while running CTest
>>>> make: *** [test] Error 8
>>>>
>>>>
>>>>
>>>>
>>>> -jeff
>>>>
>>>>
>>>> Utkarsh
>>>>
>>>> On Fri, Jan 9, 2015 at 3:46 PM, Jeff
>>>> Becker <jeffrey.c.becker at nasa.gov
>>>> <mailto:jeffrey.c.becker at nasa.gov>>
>>>> wrote:
>>>>
>>>> Almost there - make output below.
>>>> Any ideas? Thanks.
>>>>
>>>> -jeff
>>>>
>>>> Scanning dependencies of target
>>>> ParaViewExamples
>>>> [ 80%] Build examples as a separate
>>>> project
>>>> Not searching for unused variables
>>>> given on the command line.
>>>> Not searching for unused variables
>>>> given on the command line.
>>>> Internal cmake changing into directory:
>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>> ======== CMake output ======
>>>> The C compiler identification is
>>>> GNU 4.4.7
>>>> The CXX compiler identification is
>>>> GNU 4.4.7
>>>> Check for working C compiler:
>>>> /usr/bin/cc
>>>> Configuring
>>>> Check for working C compiler:
>>>> /usr/bin/cc -- works
>>>> Detecting C compiler ABI info
>>>> Configuring
>>>> Detecting C compiler ABI info - done
>>>> Check for working CXX compiler:
>>>> /usr/bin/c++
>>>> Configuring
>>>> Check for working CXX compiler:
>>>> /usr/bin/c++ -- works
>>>> Detecting CXX compiler ABI info
>>>> Configuring
>>>> Detecting CXX compiler ABI info - done
>>>> Looking for Q_WS_X11
>>>> Configuring
>>>> Looking for Q_WS_X11 - found
>>>> Looking for Q_WS_WIN
>>>> Configuring
>>>> Looking for Q_WS_WIN - not found
>>>> Looking for Q_WS_QWS
>>>> Configuring
>>>> Looking for Q_WS_QWS - not found
>>>> Looking for Q_WS_MAC
>>>> Configuring
>>>> Looking for Q_WS_MAC - not found
>>>> Found Qt4:
>>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>>> (found version
>>>> "4.8.6")
>>>> Configuring
>>>> Found Qt4:
>>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>>> (found version
>>>> "4.8.6")
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring done
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating done
>>>> Build files have been written to:
>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>> Found Qt4:
>>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>>> (found version
>>>> "4.8.6")
>>>> Configuring
>>>> Found Qt4:
>>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>>> (found version
>>>> "4.8.6")
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring
>>>> Configuring done
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating
>>>> Generating done
>>>> Build files have been written to:
>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>> ======== End CMake output ======
>>>> Change Dir:
>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>>
>>>> Run Build Command:/usr/bin/gmake
>>>> gmake[3]: Entering directory
>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>> gmake[4]: Entering directory
>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>> gmake[5]: Entering directory
>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>> [ 1%] Generating Documentation
>>>> HTMLs from xmls
>>>> Processing wiki sources
>>>> Processing wiki filters
>>>> Processing wiki writers
>>>> Processing wiki readers
>>>> [ 1%] Compiling Qt help project
>>>> SMMyElevation.qhp
>>>> Building up file structure...
>>>> Insert custom filters...
>>>> Insert help data for filter section
>>>> (1 of 1)...
>>>> Insert files...
>>>> Warning: The file
>>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css
>>>> does
>>>> not
>>>> exist! Skipping it.
>>>> Warning: The file
>>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png
>>>> does
>>>> not
>>>> exist! Skipping it.
>>>> Warning: The file
>>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg
>>>> does
>>>> not
>>>> exist! Skipping it.
>>>> Insert contents...
>>>> Insert indices...
>>>> Documentation successfully generated.
>>>> [ 2%] Generating SMMyElevation_doc.h
>>>> -- Generate module: SMMyElevation
>>>> gmake[5]: *** No rule to make target
>>>> `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3',
>>>> needed by
>>>> `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'.
>>>> Stop.
>>>> gmake[5]: Leaving directory
>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>> gmake[4]: ***
>>>> [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all]
>>>> Error 2
>>>> gmake[4]: Leaving directory
>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>> gmake[3]: *** [all] Error 2
>>>> gmake[3]: Leaving directory
>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>> make[2]: ***
>>>> [ParaViewExamples.done] Error 1
>>>> make[1]: ***
>>>> [CMakeFiles/ParaViewExamples.dir/all]
>>>> Error 2
>>>> make: *** [all] Error 2
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>> <http://www.kitware.com>
>>>>
>>>> Visit other Kitware open-source
>>>> projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and
>>>> check the ParaView Wiki at:
>>>> http://paraview.org/Wiki/ParaView
>>>>
>>>> Search the list archives at:
>>>> http://markmail.org/search/?q=ParaView
>>>>
>>>> Follow this link to
>>>> subscribe/unsubscribe:
>>>> http://public.kitware.com/mailman/listinfo/paraview
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>> <http://www.kitware.com>
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check
>>>> the ParaView Wiki at:
>>>> http://paraview.org/Wiki/ParaView
>>>>
>>>> Search the list archives at:
>>>> http://markmail.org/search/?q=ParaView
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://public.kitware.com/mailman/listinfo/paraview
>>>>
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com <http://www.kitware.com>
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the ParaView
>>>> Wiki at: http://paraview.org/Wiki/ParaView
>>>>
>>>> Search the list archives at:
>>>> http://markmail.org/search/?q=ParaView
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://public.kitware.com/mailman/listinfo/paraview
>>>>
>>>>
>>>
>>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150113/c60e93e4/attachment.html>
More information about the ParaView
mailing list