[Paraview] problem building ParaView Examples

Mon Jan 12 14:39:04 EST 2015

Mind doing a "ctest -D Experimental"? That'll submit the test results
to the ParaView dashboard [1] and will provide use more information as
to why those tests failed.

[1] https://open.cdash.org/index.php?project=ParaView

On Mon, Jan 12, 2015 at 11:37 AM, Jeff Becker <jeffrey.c.becker at nasa.gov> wrote:
> On 01/12/2015 10:47 AM, Jeff Becker wrote:
>
> On 01/10/2015 04:39 PM, Utkarsh Ayachit wrote:
>
> Not sure what's the issue. I tested out in my build and seems to work as
> expected. Mind attaching your CMakeCache.txt file? Did you by any chance
> turn on PARAVIEW_USE_UNIFIED_BINDINGS cmake flag?
>
>
> Yes. I turned that off, and now it builds fine. Thanks.
>
>
> I tried 'make test' and got:
>
> 97% tests passed, 47 tests failed out of 1499
>
> Failed tests listed below. Do I need to worry about these, and if so, how to
> fix?
>
> Thanks.
>
> -jeff
>
> The following tests FAILED:
>       1 - pv.TestDevelopmentInstall (Failed)
>      73 - vtkPVVTKExtensionsDefault-HeaderTest (Failed)
>     688 - vtkIONetCDFPython-NetCDFCF2DBounds (Failed)
>     779 - vtkPVServerManagerDefaultPython-MultiView (Failed)
>     786 - vtkPVServerManagerDefaultPython-SymmetricMultiView (Failed)
>     1026 - vtkRenderingVolumeCxx-TestGPUVolumeRayCastMapperWindowLevel
> (Failed)
>     1103 - pv.FileSeries (Failed)
>     1104 - pv.HistogramSelection (Failed)
>     1119 - pv.FindDataDialog (Failed)
>     1136 - pv.AnimatePipelineTime (Failed)
>     1140 - pv.CameraLink (Failed)
>     1142 - pv.CheckableHeader (Failed)
>     1165 - pv.FFTOverTime (Failed)
>     1178 - pv.NormalGlyphs (Failed)
>     1186 - pv.PlotOverTimeAutoApply (Failed)
>     1211 - pv.TemporalInterpolator (Failed)
>     1218 - pv.UndoRedo2 (Failed)
>     1230 - pv.SelectionLabels (Failed)
>     1234 - pv.TraceSupplementalProxiesFully (Failed)
>     1252 - pvcs.CameraLink (Failed)
>     1254 - pvcs.CheckableHeader (Failed)
>     1275 - pvcs.FFTOverTime (Failed)
>     1279 - pvcs.ImageVolumeRendering (Failed)
>     1293 - pvcs.PlotOverTimeAutoApply (Failed)
>     1301 - pvcs.PropertyLink (Failed)
>     1317 - pvcs.TensorGlyph (Failed)
>     1318 - pvcs.TemporalInterpolator (Failed)
>     1325 - pvcs.UndoRedo2 (Failed)
>     1340 - pvcs.TraceSupplementalProxiesFully (Failed)
>     1346 - pvcs.HistogramSelection (Failed)
>     1351 - pvcs.NonlinearSubdivisionDisplay (Failed)
>     1360 - pvcs.FindDataDialog (Failed)
>     1376 - pvcrs.CameraLink (Failed)
>     1378 - pvcrs.CheckableHeader (Failed)
>     1384 - pvcrs.ComparativeVisPanel (Failed)
>     1415 - pvcrs.PropertyLink (Failed)
>     1418 - pvcrs.RepresentationSelector (Failed)
>     1420 - pvcrs.SaveCSV (Failed)
>     1422 - pvcrs.SimpleInteraction (Failed)
>     1424 - pvcrs.SliceAlongPolyline (Failed)
>     1426 - pvcrs.SpreadSheet2 (Failed)
>     1430 - pvcrs.TabbedViews (Failed)
>     1432 - pvcrs.TemporalInterpolator (Failed)
>     1439 - pvcrs.UndoRedo2 (Failed)
>     1453 - pvcrs.TraceSupplementalProxiesFully (Failed)
>     1458 - pvcrs.HistogramSelection (Failed)
>     1469 - pvcrs.FindDataDialog (Failed)
> Errors while running CTest
> make: *** [test] Error 8
>
>
>
>
> -jeff
>
>
> Utkarsh
>
> On Fri, Jan 9, 2015 at 3:46 PM, Jeff Becker <jeffrey.c.becker at nasa.gov>
> wrote:
>>
>> Almost there - make output below. Any ideas? Thanks.
>>
>> -jeff
>>
>> Scanning dependencies of target ParaViewExamples
>> [ 80%] Build examples as a separate project
>> Not searching for unused variables given on the command line.
>> Not searching for unused variables given on the command line.
>> Internal cmake changing into directory:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>> ======== CMake output     ======
>> The C compiler identification is GNU 4.4.7
>> The CXX compiler identification is GNU 4.4.7
>> Check for working C compiler: /usr/bin/cc
>> Configuring
>> Check for working C compiler: /usr/bin/cc -- works
>> Detecting C compiler ABI info
>> Configuring
>> Detecting C compiler ABI info - done
>> Check for working CXX compiler: /usr/bin/c++
>> Configuring
>> Check for working CXX compiler: /usr/bin/c++ -- works
>> Detecting CXX compiler ABI info
>> Configuring
>> Detecting CXX compiler ABI info - done
>> Looking for Q_WS_X11
>> Configuring
>> Looking for Q_WS_X11 - found
>> Looking for Q_WS_WIN
>> Configuring
>> Looking for Q_WS_WIN - not found
>> Looking for Q_WS_QWS
>> Configuring
>> Looking for Q_WS_QWS - not found
>> Looking for Q_WS_MAC
>> Configuring
>> Looking for Q_WS_MAC - not found
>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version "4.8.6")
>> Configuring
>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version "4.8.6")
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring done
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating done
>> Build files have been written to:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version "4.8.6")
>> Configuring
>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version "4.8.6")
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring done
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating done
>> Build files have been written to:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>> ======== End CMake output ======
>> Change Dir: /u/wk/jcbecker/ParaView-build/Examples/All
>>
>> Run Build Command:/usr/bin/gmake
>> gmake[3]: Entering directory `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[4]: Entering directory `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[5]: Entering directory `/u/wk/jcbecker/ParaView-build/Examples/All'
>> [  1%] Generating Documentation HTMLs from xmls
>> Processing wiki sources
>> Processing wiki filters
>> Processing wiki writers
>> Processing wiki readers
>> [  1%] Compiling Qt help project SMMyElevation.qhp
>> Building up file structure...
>> Insert custom filters...
>> Insert help data for filter section (1 of 1)...
>> Insert files...
>> Warning: The file
>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css does not
>> exist! Skipping it.
>> Warning: The file
>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png does not
>> exist! Skipping it.
>> Warning: The file
>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg does not
>> exist! Skipping it.
>> Insert contents...
>> Insert indices...
>> Documentation successfully generated.
>> [  2%] Generating SMMyElevation_doc.h
>> -- Generate module: SMMyElevation
>> gmake[5]: *** No rule to make target
>> `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3', needed by
>> `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'. Stop.
>> gmake[5]: Leaving directory `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[4]: *** [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all] Error 2
>> gmake[4]: Leaving directory `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[3]: *** [all] Error 2
>> gmake[3]: Leaving directory `/u/wk/jcbecker/ParaView-build/Examples/All'
>> make[2]: *** [ParaViewExamples.done] Error 1
>> make[1]: *** [CMakeFiles/ParaViewExamples.dir/all] Error 2
>> make: *** [all] Error 2
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>
>
>
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/paraview
>