[Paraview] problem building ParaView Examples

[Jeff Becker]

On 01/10/2015 04:39 PM, Utkarsh Ayachit wrote:
> Not sure what's the issue. I tested out in my build and seems to work 
> as expected. Mind attaching your CMakeCache.txt file? Did you by any 
> chance turn on PARAVIEW_USE_UNIFIED_BINDINGS cmake flag?

Yes. I turned that off, and now it builds fine. Thanks.

-jeff

>
> Utkarsh
>
> On Fri, Jan 9, 2015 at 3:46 PM, Jeff Becker <jeffrey.c.becker at nasa.gov 
> <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>
>     Almost there - make output below. Any ideas? Thanks.
>
>     -jeff
>
>     Scanning dependencies of target ParaViewExamples
>     [ 80%] Build examples as a separate project
>     Not searching for unused variables given on the command line.
>     Not searching for unused variables given on the command line.
>     Internal cmake changing into directory:
>     /u/wk/jcbecker/ParaView-build/Examples/All
>     ======== CMake output     ======
>     The C compiler identification is GNU 4.4.7
>     The CXX compiler identification is GNU 4.4.7
>     Check for working C compiler: /usr/bin/cc
>     Configuring
>     Check for working C compiler: /usr/bin/cc -- works
>     Detecting C compiler ABI info
>     Configuring
>     Detecting C compiler ABI info - done
>     Check for working CXX compiler: /usr/bin/c++
>     Configuring
>     Check for working CXX compiler: /usr/bin/c++ -- works
>     Detecting CXX compiler ABI info
>     Configuring
>     Detecting CXX compiler ABI info - done
>     Looking for Q_WS_X11
>     Configuring
>     Looking for Q_WS_X11 - found
>     Looking for Q_WS_WIN
>     Configuring
>     Looking for Q_WS_WIN - not found
>     Looking for Q_WS_QWS
>     Configuring
>     Looking for Q_WS_QWS - not found
>     Looking for Q_WS_MAC
>     Configuring
>     Looking for Q_WS_MAC - not found
>     Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>     "4.8.6")
>     Configuring
>     Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>     "4.8.6")
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring done
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating done
>     Build files have been written to:
>     /u/wk/jcbecker/ParaView-build/Examples/All
>     Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>     "4.8.6")
>     Configuring
>     Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>     "4.8.6")
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring
>     Configuring done
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating
>     Generating done
>     Build files have been written to:
>     /u/wk/jcbecker/ParaView-build/Examples/All
>     ======== End CMake output ======
>     Change Dir: /u/wk/jcbecker/ParaView-build/Examples/All
>
>     Run Build Command:/usr/bin/gmake
>     gmake[3]: Entering directory
>     `/u/wk/jcbecker/ParaView-build/Examples/All'
>     gmake[4]: Entering directory
>     `/u/wk/jcbecker/ParaView-build/Examples/All'
>     gmake[5]: Entering directory
>     `/u/wk/jcbecker/ParaView-build/Examples/All'
>     [  1%] Generating Documentation HTMLs from xmls
>     Processing wiki sources
>     Processing wiki filters
>     Processing wiki writers
>     Processing wiki readers
>     [  1%] Compiling Qt help project SMMyElevation.qhp
>     Building up file structure...
>     Insert custom filters...
>     Insert help data for filter section (1 of 1)...
>     Insert files...
>     Warning: The file
>     /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css does
>     not exist! Skipping it.
>     Warning: The file
>     /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png does
>     not exist! Skipping it.
>     Warning: The file
>     /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg does
>     not exist! Skipping it.
>     Insert contents...
>     Insert indices...
>     Documentation successfully generated.
>     [  2%] Generating SMMyElevation_doc.h
>     -- Generate module: SMMyElevation
>     gmake[5]: *** No rule to make target
>     `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3',
>     needed by `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'. Stop.
>     gmake[5]: Leaving directory
>     `/u/wk/jcbecker/ParaView-build/Examples/All'
>     gmake[4]: *** [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all]
>     Error 2
>     gmake[4]: Leaving directory
>     `/u/wk/jcbecker/ParaView-build/Examples/All'
>     gmake[3]: *** [all] Error 2
>     gmake[3]: Leaving directory
>     `/u/wk/jcbecker/ParaView-build/Examples/All'
>     make[2]: *** [ParaViewExamples.done] Error 1
>     make[1]: *** [CMakeFiles/ParaViewExamples.dir/all] Error 2
>     make: *** [all] Error 2
>
>     _______________________________________________
>     Powered by www.kitware.com <http://www.kitware.com>
>
>     Visit other Kitware open-source projects at
>     http://www.kitware.com/opensource/opensource.html
>
>     Please keep messages on-topic and check the ParaView Wiki at:
>     http://paraview.org/Wiki/ParaView
>
>     Search the list archives at: http://markmail.org/search/?q=ParaView
>
>     Follow this link to subscribe/unsubscribe:
>     http://public.kitware.com/mailman/listinfo/paraview
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150112/65a60cc4/attachment.html>