[Paraview] How to simply "Reload" a data file
Zenker, Dr. Matthias
Matthias.Zenker at erbe-med.com
Mon Sep 22 05:16:01 EDT 2014
Hi Utkarsh,
thank you for the Python script.
Having never used Python scripts in ParaView before, I have difficulties to run it. When I open the Python shell and try to launch the script with the "Run Script" button, I get an error message saying:
Traceback (most recent call last):
File "<string>", line 19, in <module>
NameError: name 'GetActiveSource' is not defined
I use ParaView 4.0.1 under Windows 7. I have added the lib directory of ParaView to my path, as it says in the ParaView Python documentation. Is there anything else I need to do to run the script?
When I load it as a macro, the corresponding button appears, but when I click on it, nothing seems to happen. I have tested it with a pvd time collection where I have commented out the last timestep. When I loaded it, all timesteps but the last one were visible. Then I removed the comment marks around in the last timestep in the pvd file and lauched the Refresh Reader macro. I would expect that now the last timestep in the pvd would be visible, but it wasn't.
You said that the reader to reload should be the active reader. How do I see which reader is the active one? The pvd collection was highlighted when I activated the macro. Do I have to do something else?
Thanks,
Matthias
> -----Ursprüngliche Nachricht-----
> Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
> Gesendet: Sonntag, 21. September 2014 16:17
> An: Zenker, Dr. Matthias
> Cc: Cory Quammen; paraview at paraview.org
> Betreff: Re: [Paraview] How to simply "Reload" a data file
>
> Matthias,
>
> Attached is the Python script that reloads a file-series. You can import this as
> a macro or just run it from the Python shell. In either case, ensure that the
> reader to reload is the active reader.
>
> Utkarsh
>
>
> On Thu, Sep 18, 2014 at 9:34 AM, Zenker, Dr. Matthias
> <Matthias.Zenker at erbe-med.com> wrote:
> > OK - but don't forget that the weekend is also there to have some free
> > time... ;)
> >
> > Matthias
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
> >> Gesendet: Donnerstag, 18. September 2014 14:46
> >> An: Zenker, Dr. Matthias
> >> Cc: Cory Quammen; paraview at paraview.org
> >> Betreff: Re: [Paraview] How to simply "Reload" a data file
> >>
> >> Sorry, didn't get around to it yet. Over this weekend is more likely,
> >> since I am tracking down some last minute issues with 4.2 right now.
> >>
> >> Utkarsh
> >>
> >> On Thu, Sep 18, 2014 at 3:33 AM, Zenker, Dr. Matthias
> >> <Matthias.Zenker at erbe-med.com> wrote:
> >> > Hi Utkarsh,
> >> >
> >> > any news regarding a reload data function (see below)?
> >> >
> >> > Matthias
> >> >
> >> >> -----Ursprüngliche Nachricht-----
> >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
> >> >> Gesendet: Montag, 15. September 2014 16:50
> >> >> An: Zenker, Dr. Matthias
> >> >> Cc: Cory Quammen; paraview at paraview.org
> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file
> >> >>
> >> >> Ah. since it's a file series, it would not work the way Cory is
> >> >> suggesting. I'll see if I can cook up a Python script that can
> >> >> make this possible for now. We're putting this on the roadmap for
> >> >> the next release (I know I've said that a few times in the past :) ).
> >> >>
> >> >> Utkarsh
> >> >>
> >> >> On Mon, Sep 15, 2014 at 10:31 AM, Zenker, Dr. Matthias
> >> >> <Matthias.Zenker at erbe-med.com> wrote:
> >> >> > Normally I load a time series, either a series of vtu files or a
> >> >> > time collection
> >> >> (pvd file containing the vtu file names with asociated timestamps).
> >> >> During the simulation, new files are added to the series. So it
> >> >> would be nice to watch the simulation going on by reloading from time
> to time.
> >> >> >
> >> >> > Matthias
> >> >> >
> >> >> >> -----Ursprüngliche Nachricht-----
> >> >> >> Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
> >> >> >> Gesendet: Montag, 15. September 2014 16:28
> >> >> >> An: Zenker, Dr. Matthias
> >> >> >> Cc: Cory Quammen; paraview at paraview.org
> >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file
> >> >> >>
> >> >> >> I suspect will not work with vtu. To understand this better,
> >> >> >> what is that which is changing that you need to reload the
> >> >> >> file? Are you loading a file series or a single file?
> >> >> >>
> >> >> >> Utkarsh
> >> >> >>
> >> >> >> On Mon, Sep 15, 2014 at 9:54 AM, Zenker, Dr. Matthias
> >> >> >> <Matthias.Zenker at erbe-med.com> wrote:
> >> >> >> > Hi Cory,
> >> >> >> >
> >> >> >> > I use the reader for vtu format and pvd (vtu time
> >> >> >> > collection). I tried to
> >> >> >> modify the xml as follows:
> >> >> >> >
> >> >> >> > <ParaViewPlugin>
> >> >> >> > <ServerManagerConfiguration>
> >> >> >> > <ProxyGroup name="sources"> <SourceProxy
> name="VTUrefresh"
> >> >> >> > base_proxygroup="sources"
> >> >> >> base_proxyname="VTUReader" class="vtuReader">
> >> >> >> > <Property name="Refresh" command="Modified"
> >> >> >> panel_widget="command_button"/>
> >> >> >> > <Hints>
> >> >> >> > <ReaderFactory extensions="vtu pvd"
> >> >> >> > file_description="vtu Reader
> >> >> >> (Refresh button)" />
> >> >> >> > </Hints>
> >> >> >> > </SourceProxy>
> >> >> >> > </ProxyGroup>
> >> >> >> > </ServerManagerConfiguration>
> >> >> >> > <ParaViewReaders>
> >> >> >> > <Reader name="ReaderWithButton" />
> >> >> >> > </ParaViewReaders>
> >> >> >> > </ParaViewPlugin>
> >> >> >> >
> >> >> >> > But I cannot even load it as plugin. Presumably there are
> >> >> >> > special keyword to
> >> >> >> use for the name of the original reader. Is there a
> >> >> >> documentation where I can find more information on that topic?
> >> >> >> >
> >> >> >> > Thanks,
> >> >> >> >
> >> >> >> > Matthias
> >> >> >> >
> >> >> >> >> -----Ursprüngliche Nachricht-----
> >> >> >> >> Von: Cory Quammen [mailto:cory.quammen at kitware.com]
> >> >> >> >> Gesendet: Montag, 15. September 2014 15:05
> >> >> >> >> An: Zenker, Dr. Matthias
> >> >> >> >> Cc: paraview at paraview.org
> >> >> >> >> Betreff: Re: [Paraview] How to simply "Reload" a data file
> >> >> >> >>
> >> >> >> >> Matthias,
> >> >> >> >>
> >> >> >> >> The method I suggested requires modifying ParaView's source
> >> >> >> >> code, so it won't work for a binary distribution.
> >> >> >> >>
> >> >> >> >> As for the XML method, did you try to load an Xdmf file
> >> >> >> >> through what should be the new "Xdmf Reader (Refresh
> button)" reader?
> >> >> >> >> If you are loading a different type of file, this plugin
> >> >> >> >> will have no effect because it provides a Refresh button
> >> >> >> >> only for the Xdmf reader. You could modify the XML for other
> >> >> >> >> reader types,
> >> though.
> >> >> >> >>
> >> >> >> >> Thanks,
> >> >> >> >> Cory
> >> >> >> >>
> >> >> >> >> On Mon, Sep 15, 2014 at 4:16 AM, Zenker, Dr. Matthias
> >> >> >> >> <Matthias.Zenker at erbe-med.com> wrote:
> >> >> >> >> > Hi,
> >> >> >> >> >
> >> >> >> >> > I wanted to try the "Reload" button which presumably can
> >> >> >> >> > be created by
> >> >> >> >> one of the methods outlined below. But I am maybe too naive
> >> >> >> >> or am missing
> >> >> >> >> something: I have a Windoze binary distribution of ParaView
> 4.0.1.
> >> >> >> >> I did not find the file indicated by Cory, and copying the
> >> >> >> >> xml code given by Sébastien into a file and loading that as
> >> >> >> >> plugin had no effect
> >> >> >> visible to me.
> >> >> >> >> >
> >> >> >> >> > What am I missing here?
> >> >> >> >> >
> >> >> >> >> > Thank you,
> >> >> >> >> >
> >> >> >> >> > Matthias
> >> >> >> >> >
> >> >> >> >> >> -----Ursprüngliche Nachricht-----
> >> >> >> >> >> Von: paraview-bounces at paraview.org [mailto:paraview-
> >> >> >> >> >> bounces at paraview.org] Im Auftrag von paraview-
> >> >> >> request at paraview.org
> >> >> >> >> >> Gesendet: Samstag, 15. Juni 2013 18:00
> >> >> >> >> >> An: paraview at paraview.org
> >> >> >> >> >> Betreff: Reload a file
> >> >> >> >> >>
> >> >> >> >> >> Send ParaView mailing list submissions to
> >> >> >> >> >> paraview at paraview.org
> >> >> >> >> >>
> >> >> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> >> >> >> >> http://www.paraview.org/mailman/listinfo/paraview
> >> >> >> >> >> or, via email, send a message with subject or body 'help' to
> >> >> >> >> >> paraview-request at paraview.org
> >> >> >> >> >>
> >> >> >> >> >> You can reach the person managing the list at
> >> >> >> >> >> paraview-owner at paraview.org
> >> >> >> >> >>
> >> >> >> >> >> When replying, please edit your Subject line so it is
> >> >> >> >> >> more specific than
> >> >> >> >> "Re:
> >> >> >> >> >> Contents of ParaView digest..."
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> Today's Topics:
> >> >> >> >> >>
> >> >> >> >> >> 1. Re: How to simply "Reload" a data file (Cory
> >> >> >> >> >> Quammen)
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> ---------------------------------------------------------
> >> >> >> >> >> ---
> >> >> >> >> >> ---
> >> >> >> >> >> ---
> >> >> >> >> >> ---
> >> >> >> >> >> -
> >> >> >> >> >>
> >> >> >> >> >> Message: 1
> >> >> >> >> >> Date: Fri, 14 Jun 2013 13:42:34 -0400
> >> >> >> >> >> From: Cory Quammen <cquammen at cs.unc.edu>
> >> >> >> >> >> Subject: Re: [Paraview] How to simply "Reload" a data
> >> >> >> >> >> file
> >> >> >> >> >> To: Sebastien Jourdain <sebastien.jourdain at kitware.com>
> >> >> >> >> >> Cc: Michael Jackson <mike.jackson at bluequartz.net>,
> >> ParaView
> >> >> >> >> >> <paraview at paraview.org>
> >> >> >> >> >> Message-ID:
> >> >> >> >> >> <CANmPiKDegNcAjjRwcVimiGAq3s9j02q7xE-
> >> >> >> >> >> OeRVRSrNbZUSQXg at mail.gmail.com>
> >> >> >> >> >> Content-Type: text/plain; charset=ISO-8859-1
> >> >> >> >> >>
> >> >> >> >> >> For what it's worth, I just experimented with adding the
> >> >> >> >> >> line
> >> >> >> >> >>
> >> >> >> >> >> <Property name="Refresh" command="Modified"
> >> >> >> >> >> panel_widget="command_button"/>
> >> >> >> >> >>
> >> >> >> >> >> to the CSV reader and XDMF reader in
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >>
> >> >> >>
> >> >>
> >>
> ParaView/ParaViewCore/ServerManager/SMApplication/Resources/readers
> >> >> >> >> >> .xml
> >> >> >> >> >>
> >> >> >> >> >> The Refresh button appears among the other property
> >> >> >> >> >> widgets and it indeed reloads the data set.
> >> >> >> >> >>
> >> >> >> >> >> I would happily add this to all the readers and submit a
> >> >> >> >> >> patch to gerrit if it would be received well by the core
> >> >> >> >> >> ParaView
> >> >> developers.
> >> >> >> >> >>
> >> >> >> >> >> Thanks,
> >> >> >> >> >> Cory
> >> >> >> >> >>
> >> >> >> >> >> On Fri, Jun 14, 2013 at 11:57 AM, Sebastien Jourdain
> >> >> >> >> >> <sebastien.jourdain at kitware.com> wrote:
> >> >> >> >> >> > BTW that's the correct XML for you, just need to create
> >> >> >> >> >> > a file with that in and load it as a plugin and you
> >> >> >> >> >> > will have your
> >> >> "Refresh"
> >> >> >> button.
> >> >> >> >> >> >
> >> >> >> >> >> > <ParaViewPlugin>
> >> >> >> >> >> > <ServerManagerConfiguration>
> >> >> >> >> >> > <ProxyGroup name="sources"> <SourceProxy
> >> >> >> >> >> > name="XDMFRrefresh" base_proxygroup="sources"
> >> >> >> >> >> > base_proxyname="XdmfReader" class="vtkXdmfReader">
> >> >> >> >> >> > <Property name="Refresh" command="Modified"
> >> >> >> >> >> > panel_widget="command_button"/>
> >> >> >> >> >> > <Hints>
> >> >> >> >> >> > <ReaderFactory extensions="xmf xdmf"
> >> >> >> >> >> > file_description="Xdmf Reader (Refresh button)" />
> >> >> >> >> >> > </Hints>
> >> >> >> >> >> > </SourceProxy>
> >> >> >> >> >> > </ProxyGroup>
> >> >> >> >> >> > </ServerManagerConfiguration>
> >> >> >> >> >> > <ParaViewReaders>
> >> >> >> >> >> > <Reader name="ReaderWithButton" />
> >> >> >> >> >> > </ParaViewReaders>
> >> >> >> >> >> > </ParaViewPlugin>
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> > On Fri, Jun 14, 2013 at 10:27 AM, Sebastien Jourdain
> >> >> >> >> >> > <sebastien.jourdain at kitware.com> wrote:
> >> >> >> >> >> >>
> >> >> >> >> >> >> Another approach could be a python macro that
> >> >> >> >> >> >> invalidate the "active/selected' proxy in the
> >> >> >> >> >> >> pipeline, but that one will require the usage of ParaView
> in built-in mode.
> >> >> >> >> >> >>
> >> >> >> >> >> >> If interested I can try to write the corresponding
> >> >> >> >> >> >> python
> >> code...
> >> >> >> >> >> >>
> >> >> >> >> >> >> Seb
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> On Fri, Jun 14, 2013 at 10:24 AM, Sebastien Jourdain
> >> >> >> >> >> >> <sebastien.jourdain at kitware.com> wrote:
> >> >> >> >> >> >>>
> >> >> >> >> >> >>> I forgot to state the obvious, the plugin is a XML one...
> >> >> >> >> >> >>> No code involved...
> >> >> >> >> >> >>>
> >> >> >> >> >> >>> In fact, just having the XML that I wrote in a file
> >> >> >> >> >> >>> extend the UI with a button to refresh the reader
> >> >> >> >> >> >>> should be
> >> enough.
> >> >> >> >> >> >>> Need to figure out why the reader factory did not
> >> >> >> >> >> >>> catch up the
> >> >> >> hint.
> >> >> >> >> >> >>>
> >> >> >> >> >> >>> That should be the only thing that you would need.
> >> >> >> >> >> >>>
> >> >> >> >> >> >>> Seb
> >> >> >> >> >> >>>
> >> >> >> >> >> >>>
> >> >> >> >> >> >>>
> >> >> >> >> >> >>> On Fri, Jun 14, 2013 at 10:08 AM, Michael Jackson
> >> >> >> >> >> >>> <mike.jackson at bluequartz.net> wrote:
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> I was hoping that ParaView just had something built in.
> >> >> >> >> >> >>>> I would rather not have to create a plugin and
> >> >> >> >> >> >>>> distribute that along side my own software and to
> >> >> >> >> >> >>>> keep up on builds for all the various OS's and all of that.
> >> >> >> >> >> >>>> i tried that for a while and I just could not
> >> >> >> >> keep up.
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> So either I am the only person who has asked for
> >> >> >> >> >> >>>> this or there is some over riding reason in the
> >> >> >> >> >> >>>> design of ParView why this type of functionality is not in
> ParaView.
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> Thanks
> >> >> >> >> >> >>>>
> >> >> >> >> >>
> >> >> >> >>
> >> >> >>
> >> >>
> >>
> __________________________________________________________
> >> >> >> >> >> _
> >> >> >> >> >> >>>> Mike Jackson Principal Software Engineer
> >> >> >> >> >> >>>> BlueQuartz Software Dayton, Ohio
> >> >> >> >> >> >>>> mike.jackson at bluequartz.net
> www.bluequartz.net
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> On Jun 14, 2013, at 3:40 PM, Felipe Bordeu
> >> >> >> >> >> >>>> <felipe.bordeu at ec-nantes.fr>
> >> >> >> >> >> >>>> wrote:
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> > hi you can try the approach of S?bastien
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > http://perso.uclouvain.be/sebastien.blaise/tools.h
> >> >> >> >> >> >>>> > tml
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > I haven't tested yet.
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > You can save the code as a macro, so you will have
> >> >> >> >> >> >>>> > a
> >> button.
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > Felipe
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > Le 14/06/2013 09:42, Michael Jackson a ?crit :
> >> >> >> >> >> >>>> >> Is there button where I can simply reload a data
> >> >> >> >> >> >>>> >> file that was read in a pipeline?
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> We have a workflow where we process data into a
> >> >> >> >> >> >>>> >> file and view it in ParaView. it is becoming
> >> >> >> >> >> >>>> >> tedious to blow away the entire pipeline just to
> >> >> >> >> >> >>>> >> reload the new
> >> data.
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> I know about state files but this still requires
> >> >> >> >> >> >>>> >> the user to go to the File->Load State... " menu
> >> >> >> >> >> >>>> >> and then select a state
> >> >> >> file.
> >> >> >> >> >> >>>> >> I would like to just select the data file in the
> >> >> >> >> >> >>>> >> Pipeline browser (XDMF File reader for us), and
> >> >> >> >> >> >>>> >> just click some button that just reloads data from
> the file.
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> Or am I just missing something? I am using
> >> >> >> >> >> >>>> >> ParaView 3.98.1. I have to admit I have not tried
> >> >> >> >> >> >>>> >> any of the
> >> >> >> >> >> >>>> >> 4.0.RC*
> >> >> >> downloads.
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> Thanks
> >> >> >> >> >> >>>> >>
> >> >> >> >> >>
> >> >> >> >>
> >> >> >>
> >> >>
> >>
> _________________________________________________________
> >> >> >> >> >> >>>> >> Mike Jackson mike.jackson at bluequartz.net
> >> >> >> >> >> >>>> >> BlueQuartz Software www.bluequartz.net
> >> >> >> >> >> >>>> >> Principal Software Engineer Dayton, Ohio
> >> >> >> >> >> >>>> >>
> >> >> _______________________________________________
> >> >> >> >> >> >>>> >> Powered by www.kitware.com
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> Visit other Kitware open-source projects at
> >> >> >> >> >> >>>> >>
> >> http://www.kitware.com/opensource/opensource.html
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> Please keep messages on-topic and check the
> >> >> >> >> >> >>>> >> ParaView Wiki
> >> >> >> at:
> >> >> >> >> >> >>>> >> http://paraview.org/Wiki/ParaView
> >> >> >> >> >> >>>> >>
> >> >> >> >> >> >>>> >> Follow this link to subscribe/unsubscribe:
> >> >> >> >> >> >>>> >>
> http://www.paraview.org/mailman/listinfo/paraview
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > --
> >> >> >> >> >> >>>> > Felipe Bordeu Weldt Ing?nieur de Recherche
> >> >> >> >> >> >>>> > -------------------------------------
> >> >> >> >> >> >>>> > T?l. : 33 (0)2 40 37 16 57 Fax. : 33 (0)2 40 74 74
> >> >> >> >> >> >>>> > 06 Felipe.Bordeu at ec-nantes.fr Institut GeM - UMR
> >> >> >> >> >> >>>> > CNRS
> >> >> >> >> >> >>>> > 6183 ?cole Centrale Nantes
> >> >> >> >> >> >>>> > 1 Rue de La No?, 44321 Nantes, FRANCE
> >> >> >> >> >> >>>> > -------------------------------------
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> >
> >> >> _______________________________________________
> >> >> >> >> >> >>>> > Powered by www.kitware.com
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > Visit other Kitware open-source projects at
> >> >> >> >> >> >>>> >
> http://www.kitware.com/opensource/opensource.html
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > Please keep messages on-topic and check the
> >> >> >> >> >> >>>> > ParaView Wiki
> >> >> >> at:
> >> >> >> >> >> >>>> > http://paraview.org/Wiki/ParaView
> >> >> >> >> >> >>>> >
> >> >> >> >> >> >>>> > Follow this link to subscribe/unsubscribe:
> >> >> >> >> >> >>>> > http://www.paraview.org/mailman/listinfo/paraview
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>>
> >> _______________________________________________
> >> >> >> >> >> >>>> Powered by www.kitware.com
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> Visit other Kitware open-source projects at
> >> >> >> >> >> >>>>
> http://www.kitware.com/opensource/opensource.html
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> Please keep messages on-topic and check the ParaView
> >> >> >> >> >> >>>> Wiki
> >> >> at:
> >> >> >> >> >> >>>> http://paraview.org/Wiki/ParaView
> >> >> >> >> >> >>>>
> >> >> >> >> >> >>>> Follow this link to subscribe/unsubscribe:
> >> >> >> >> >> >>>> http://www.paraview.org/mailman/listinfo/paraview
> >> >> >> >> >> >>>
> >> >> >> >> >> >>>
> >> >> >> >> >> >>
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> >
> _______________________________________________
> >> >> >> >> >> > Powered by www.kitware.com
> >> >> >> >> >> >
> >> >> >> >> >> > Visit other Kitware open-source projects at
> >> >> >> >> >> > http://www.kitware.com/opensource/opensource.html
> >> >> >> >> >> >
> >> >> >> >> >> > Please keep messages on-topic and check the ParaView
> >> >> >> >> >> > Wiki
> >> at:
> >> >> >> >> >> > http://paraview.org/Wiki/ParaView
> >> >> >> >> >> >
> >> >> >> >> >> > Follow this link to subscribe/unsubscribe:
> >> >> >> >> >> > http://www.paraview.org/mailman/listinfo/paraview
> >> >> >> >> >> >
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> --
> >> >> >> >> >> Cory Quammen
> >> >> >> >> >> Research Associate
> >> >> >> >> >> Department of Computer Science The University of North
> >> >> >> >> >> Carolina at Chapel Hill
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> ------------------------------
> >> >> >> >> >>
> >> >> >> >> >>
> _______________________________________________
> >> >> >> >> >> Powered by www.kitware.com
> >> >> >> >> >>
> >> >> >> >> >> Visit other Kitware open-source projects at
> >> >> >> >> >> http://www.kitware.com/opensource/opensource.html
> >> >> >> >> >>
> >> >> >> >> >> Please keep messages on-topic and check the ParaView Wiki
> at:
> >> >> >> >> >> http://paraview.org/Wiki/ParaView
> >> >> >> >> >>
> >> >> >> >> >> Follow this link to subscribe/unsubscribe:
> >> >> >> >> >> http://www.paraview.org/mailman/listinfo/paraview
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> End of ParaView Digest, Vol 110, Issue 42
> >> >> >> >> >> *****************************************
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >>
> >> >> >>
> >> >>
> >>
> __________________________________________________________
> >> >> >> >> ___________
> >> >> >> >> > ERBE Elektromedizin GmbH
> >> >> >> >> > Firmensitz: 72072 Tuebingen
> >> >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> >> >> >> > Registergericht: Stuttgart HRB 380137
> >> >> >> >> >
> >> >> >> >> > _______________________________________________
> >> >> >> >> > Powered by www.kitware.com
> >> >> >> >> >
> >> >> >> >> > Visit other Kitware open-source projects at
> >> >> >> >> > http://www.kitware.com/opensource/opensource.html
> >> >> >> >> >
> >> >> >> >> > Please keep messages on-topic and check the ParaView Wiki
> at:
> >> >> >> >> > http://paraview.org/Wiki/ParaView
> >> >> >> >> >
> >> >> >> >> > Follow this link to subscribe/unsubscribe:
> >> >> >> >> > http://public.kitware.com/mailman/listinfo/paraview
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >>
> >>
> __________________________________________________________
> >> >> >> ___________
> >> >> >> > ERBE Elektromedizin GmbH
> >> >> >> > Firmensitz: 72072 Tuebingen
> >> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> >> >> > Registergericht: Stuttgart HRB 380137
> >> >> >> >
> >> >> >> > _______________________________________________
> >> >> >> > Powered by www.kitware.com
> >> >> >> >
> >> >> >> > Visit other Kitware open-source projects at
> >> >> >> > http://www.kitware.com/opensource/opensource.html
> >> >> >> >
> >> >> >> > Please keep messages on-topic and check the ParaView Wiki at:
> >> >> >> > http://paraview.org/Wiki/ParaView
> >> >> >> >
> >> >> >> > Follow this link to subscribe/unsubscribe:
> >> >> >> > http://public.kitware.com/mailman/listinfo/paraview
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >>
> __________________________________________________________
> >> >> ___________
> >> >> > ERBE Elektromedizin GmbH
> >> >> > Firmensitz: 72072 Tuebingen
> >> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> >> > Registergericht: Stuttgart HRB 380137
> >> >> >
> >> >
> >> >
> >> >
> >>
> __________________________________________________________
> >> ___________
> >> > ERBE Elektromedizin GmbH
> >> > Firmensitz: 72072 Tuebingen
> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> > Registergericht: Stuttgart HRB 380137
> >> >
> >
> >
> >
> __________________________________________________________
> ___________
> > ERBE Elektromedizin GmbH
> > Firmensitz: 72072 Tuebingen
> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> > Registergericht: Stuttgart HRB 380137
> >
_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137
More information about the ParaView
mailing list