From michael.grabietz at img-online.de Sat Nov 1 02:14:43 2014 From: michael.grabietz at img-online.de (Michael Grabietz) Date: Sat, 01 Nov 2014 07:14:43 +0100 Subject: [Paraview] Structured Grid: strange view of surface+edges In-Reply-To: References: <5453254C.5000405@img-online.de> Message-ID: <54547A53.5050706@img-online.de> Marco and Utkarsh, Thank you! I just installed ParaView on a different computer. On this computer I get no problems with the surface+edges mode. I did not think that it could be a problem related to the hardware/driver since the structured grid is more or less quite simple. The problem arise on my laptop with a Nvidia Quadro FX 770M. I am trying to update the graphics card driver first. Michael Am 31.10.2014 18:48, schrieb Utkarsh Ayachit: > Same for me -- I cannot reproduce the problem. It could potentially be > a driver/OpenGL issue? > > Utkarsh > > On Fri, Oct 31, 2014 at 5:20 AM, Marco Nawijn wrote: >> Hi Michael, >> >> Just for your information. I tried the file with Paraview 4.2.0 on 64 bit >> linux >> and see no such artifacts. So the file itself seems to be fine. >> >> Regards, >> >> Marco >> >> >> On Fri, Oct 31, 2014 at 6:59 AM, Michael Grabietz >> wrote: >>> >>> Hello, >>> >>> I have a structured grid which seems to be well formed. If I load the vtk >>> file with ParaView 4.2 or 4.1 some strange lines appear if the display mode >>> surface+edges is selected. See the attached screen shot. For the strange >>> lines/edges no corresponding lines in the wireframe model can be found. The >>> modes surface, wireframe or points are looking good. I checked the data >>> again and again. I cannot find any issue in the structured grid. I have >>> attached the vtk file and some screenshots. >>> >>> I also viewed the grid with a small self-written python application using >>> VTK 6.1.0. It shows the same behaviour as ParaView. >>> >>> At the moment I do not have any idea how to go on. Any help is >>> appreciated. >>> >>> Michael >>> >>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> > > > -- Michael Grabietz IMG - Ingenieurbuero Michael Grabietz Stauferring 56 97941 Tauberbischofsheim Germany Fon: +49 9341 89 66 70 Fax: +49 9341 89 66 71 michael.grabietz at img-online.de www.img-online.de From michael.grabietz at img-online.de Sun Nov 2 04:13:44 2014 From: michael.grabietz at img-online.de (Michael Grabietz) Date: Sun, 02 Nov 2014 10:13:44 +0100 Subject: [Paraview] Structured Grid: strange view of surface+edges In-Reply-To: <54547A53.5050706@img-online.de> References: <5453254C.5000405@img-online.de> <54547A53.5050706@img-online.de> Message-ID: <5455F5C8.7060901@img-online.de> After installing an update of the driver, the artifacts disappeared! Thanks again for for your help! Michael Am 01.11.2014 07:14, schrieb Michael Grabietz: > Marco and Utkarsh, Thank you! > > I just installed ParaView on a different computer. On this computer I > get no problems with the surface+edges mode. I did not think that it > could be a problem related to the hardware/driver since the structured > grid is more or less quite simple. The problem arise on my laptop with a > Nvidia Quadro FX 770M. I am trying to update the graphics card driver > first. > > Michael > > Am 31.10.2014 18:48, schrieb Utkarsh Ayachit: >> Same for me -- I cannot reproduce the problem. It could potentially be >> a driver/OpenGL issue? >> >> Utkarsh >> >> On Fri, Oct 31, 2014 at 5:20 AM, Marco Nawijn wrote: >>> Hi Michael, >>> >>> Just for your information. I tried the file with Paraview 4.2.0 on 64 >>> bit >>> linux >>> and see no such artifacts. So the file itself seems to be fine. >>> >>> Regards, >>> >>> Marco >>> >>> >>> On Fri, Oct 31, 2014 at 6:59 AM, Michael Grabietz >>> wrote: >>>> >>>> Hello, >>>> >>>> I have a structured grid which seems to be well formed. If I load >>>> the vtk >>>> file with ParaView 4.2 or 4.1 some strange lines appear if the >>>> display mode >>>> surface+edges is selected. See the attached screen shot. For the >>>> strange >>>> lines/edges no corresponding lines in the wireframe model can be >>>> found. The >>>> modes surface, wireframe or points are looking good. I checked the data >>>> again and again. I cannot find any issue in the structured grid. I have >>>> attached the vtk file and some screenshots. >>>> >>>> I also viewed the grid with a small self-written python application >>>> using >>>> VTK 6.1.0. It shows the same behaviour as ParaView. >>>> >>>> At the moment I do not have any idea how to go on. Any help is >>>> appreciated. >>>> >>>> Michael >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> >> >> > -- Michael Grabietz IMG - Ingenieurbuero Michael Grabietz Stauferring 56 97941 Tauberbischofsheim Germany Fon: +49 9341 89 66 70 Fax: +49 9341 89 66 71 michael.grabietz at img-online.de www.img-online.de From utkarsh.ayachit at kitware.com Mon Nov 3 10:00:40 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Mon, 3 Nov 2014 10:00:40 -0500 Subject: [Paraview] ExtractSubset not working well in pvpython In-Reply-To: References: Message-ID: Hi, I wonder if the problem is with Fetch(). What does the following yeild? ExtractSubset0.UpdatePipeline() print ExtractSubset0.GetDataInformation().GetNumberOfPoints() Utkarsh On Thu, Oct 30, 2014 at 5:29 PM, Chukwudi Chukwudozie wrote: > Hi, > > I have a structured grid computational domain of size 800,2,800. I want to > extract the information along a line and so I do the following in my python > script. > > ExtractSubset0 = > ExtractSubset(guiName="ExtractSubset0",IncludeBoundary=0,VOI=[399, 399, 0, > 0, 0, 799], SampleRateK=1, SampleRateJ=1, SampleRateI=1) > data = servermanager.Fetch(ExtractSubset0) > numPoints=data.GetNumberOfPoints() > > However, when I plot the information on that line, I see it has only > extracted information between 0-399 in the z-coordinate direction. I even > printed numPoints to confirm how much information is extracted and I get > "numPoints=400". I am using PV 3.98.0. > > Any help on this will be appreciated. > > > > > -- > Chukwudi Chukwudozie > cchukw1 at tigers.lsu.edu > Craft and Hawkins Department of Petroleum Engineering > Louisiana State University > Patrick F. Taylor Hall (CEBA) > Room 3429 > Baton Rouge LA, 70803 > Cell:3373546822 > Office: 2255786064 > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From john.mangeri at uconn.edu Mon Nov 3 11:54:48 2014 From: john.mangeri at uconn.edu (John Mangeri) Date: Mon, 3 Nov 2014 11:54:48 -0500 Subject: [Paraview] Saving pipeline object data as a .csv Message-ID: Hello all, I'm experiencing an issue that I'm fairly sure is just a simple option that I have to change within my script or preferences When I save a filtered pipeline object(let's say a MeshQuality of an ExodusII file), as MeshData1, the program will automatically generate hundreds of .csv files. Most of them will be blank. For example, with a mesh file with 339645 elements, will save a file MeshData1k.csv in increments of 37116 for k = 0,1,2,3,...,9. It will also save 90 blank files afterwards. I would simply concatenate the tables but I have mesh files of radically different geometries and materials blocks that I need to script; these end up having different total mesh elements so the k range will not be the same and the blank files also differ. Thanks John Mangeri Univ. Connecticut -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave.demarle at kitware.com Mon Nov 3 14:26:49 2014 From: dave.demarle at kitware.com (David E DeMarle) Date: Mon, 3 Nov 2014 14:26:49 -0500 Subject: [Paraview] paraview performance In-Reply-To: References: Message-ID: The sphere source has a hardcoded limit of 1 million triangles for some reason . Plugins/MantaView/VTK/vtkMantaTestSource will generate as many as you want in parallel. The dataset is kind of nonsensical though, just a long strand of randomly jittered triangles. More recently I came up with the attached script that you can tune various parameters of to get something that more closely represents typical scientific data. I plan to push it into benchmark.py the next time I have an opportunity to benchmark ParaView. The logs do not indicate whether what kind of context the rendering takes place in. That would be a welcome addition. Until then, follow Burlen's suggestions and take a look at the VTK level test vtkRenderingOpenGLCxx-TestFBO which spits out all kinds of useful information. David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Wed, Oct 29, 2014 at 11:31 PM, R C Bording wrote: > Hi Utkarsh, > Is there simple way to see if my installation of ParaView done using the > ParaViewSuperbuild is configure with the correct gl libs to run on the > GPUs. Should I need to install a version with Mesa to benchmark against or > is there a way to that without installing a second version? > > Do the log files show if Paraview is rendering on Hardware or software? > > Cheers, > Chris B. > > > R. Christopher Bording > Supercomputing Team-iVEC at UWA > E: cbording at ivec.org > T: +61 8 6488 6905 > > 26 Dick Perry Avenue, > Technology Park > Kensington, Western Australia. > 6151 > > > > > > On 30/10/2014, at 12:36 AM, Utkarsh Ayachit wrote: > > That'd work. You can use the benchmark module [1] too to give you info > at a finer granularity. > > Utkarsh > > [1] > http://www.paraview.org/ParaView3/Doc/Nightly/www/py-doc/paraview.benchmark.html > > On Mon, Oct 27, 2014 at 12:12 PM, R C Bording wrote: > > Hi, > > Is there a rendering model that you have for testing the performance of > > the paraview? > > I have install paraview on our GPU cluster and would like validated it > > someway other than > > just putting timing calls around the Render command in the > parallelSphere.py > > script. > > > Or is that sufficient? > > > Cheers, > > Chris B > > > R. Christopher Bording > > Supercomputing Team-iVEC at UWA > > E: cbording at ivec.org > > T: +61 8 6488 6905 > > > 26 Dick Perry Avenue, > > Technology Park > > Kensington, Western Australia. > > 6151 > > > > > > > > _______________________________________________ > > Powered by www.kitware.com > > > Visit other Kitware open-source projects at > > http://www.kitware.com/opensource/opensource.html > > > Please keep messages on-topic and check the ParaView Wiki at: > > http://paraview.org/Wiki/ParaView > > > Follow this link to subscribe/unsubscribe: > > http://public.kitware.com/mailman/listinfo/paraview > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave.demarle at kitware.com Mon Nov 3 14:27:38 2014 From: dave.demarle at kitware.com (David E DeMarle) Date: Mon, 3 Nov 2014 14:27:38 -0500 Subject: [Paraview] paraview performance In-Reply-To: References: Message-ID: hate that... David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Mon, Nov 3, 2014 at 2:26 PM, David E DeMarle wrote: > The sphere source has a hardcoded limit of 1 million triangles for some > reason . > > Plugins/MantaView/VTK/vtkMantaTestSource will generate as many as you want > in parallel. The dataset is kind of nonsensical though, just a long strand > of randomly jittered triangles. > > More recently I came up with the attached script that you can tune various > parameters of to get something that more closely represents typical > scientific data. I plan to push it into benchmark.py the next time I have > an opportunity to benchmark ParaView. > > The logs do not indicate whether what kind of context the rendering takes > place in. That would be a welcome addition. Until then, follow Burlen's > suggestions and take a look at the VTK level test > vtkRenderingOpenGLCxx-TestFBO which spits out all kinds of useful > information. > > > > > > > > > David E DeMarle > Kitware, Inc. > R&D Engineer > 21 Corporate Drive > Clifton Park, NY 12065-8662 > Phone: 518-881-4909 > > On Wed, Oct 29, 2014 at 11:31 PM, R C Bording wrote: > >> Hi Utkarsh, >> Is there simple way to see if my installation of ParaView done using >> the ParaViewSuperbuild is configure with the correct gl libs to run on the >> GPUs. Should I need to install a version with Mesa to benchmark against or >> is there a way to that without installing a second version? >> >> Do the log files show if Paraview is rendering on Hardware or software? >> >> Cheers, >> Chris B. >> >> >> R. Christopher Bording >> Supercomputing Team-iVEC at UWA >> E: cbording at ivec.org >> T: +61 8 6488 6905 >> >> 26 Dick Perry Avenue, >> Technology Park >> Kensington, Western Australia. >> 6151 >> >> >> >> >> >> On 30/10/2014, at 12:36 AM, Utkarsh Ayachit wrote: >> >> That'd work. You can use the benchmark module [1] too to give you info >> at a finer granularity. >> >> Utkarsh >> >> [1] >> http://www.paraview.org/ParaView3/Doc/Nightly/www/py-doc/paraview.benchmark.html >> >> On Mon, Oct 27, 2014 at 12:12 PM, R C Bording wrote: >> >> Hi, >> >> Is there a rendering model that you have for testing the performance of >> >> the paraview? >> >> I have install paraview on our GPU cluster and would like validated it >> >> someway other than >> >> just putting timing calls around the Render command in the >> parallelSphere.py >> >> script. >> >> >> Or is that sufficient? >> >> >> Cheers, >> >> Chris B >> >> >> R. Christopher Bording >> >> Supercomputing Team-iVEC at UWA >> >> E: cbording at ivec.org >> >> T: +61 8 6488 6905 >> >> >> 26 Dick Perry Avenue, >> >> Technology Park >> >> Kensington, Western Australia. >> >> 6151 >> >> >> >> >> >> >> >> _______________________________________________ >> >> Powered by www.kitware.com >> >> >> Visit other Kitware open-source projects at >> >> http://www.kitware.com/opensource/opensource.html >> >> >> Please keep messages on-topic and check the ParaView Wiki at: >> >> http://paraview.org/Wiki/ParaView >> >> >> Follow this link to subscribe/unsubscribe: >> >> http://public.kitware.com/mailman/listinfo/paraview >> >> >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: benchSynthSource.py Type: text/x-python-script Size: 8438 bytes Desc: not available URL: From cchukw1 at tigers.lsu.edu Mon Nov 3 16:44:07 2014 From: cchukw1 at tigers.lsu.edu (Chukwudi Chukwudozie) Date: Mon, 3 Nov 2014 15:44:07 -0600 Subject: [Paraview] ExtractSubset not working well in pvpython In-Reply-To: References: Message-ID: So you understand what I'm doing, below is the full script. I added those lines and now its giving one above the number of points. I have 800 points but it pints out 801 import numpy as np import pylab as pl try: paraview.simple except: from paraview.simple import * paraview.simple._DisableFirstRenderCameraReset() num_plots = 10 time = ['00010','00050','00090','00130','00184','00250','00300','00350','00400','00500'] lims = np.zeros(num_plots) pl.gca().set_color_cycle(['black', 'green', 'blue', 'yellow','purple','chocolate','gray','brown','cyan','gold']) nameoffile = 'TEST_nodal' for i in range(0,num_plots): pfile = time[i] nameof_file = nameoffile+'.'+pfile+'.vts' print nameof_file paraview.simple._DisableFirstRenderCameraReset() TEST_nodal_00001_vts = XMLStructuredGridReader(FileName=nameof_file ) TEST_nodal_00001_vts.UpdatePipeline() TEST_nodal_00001_vts.PointArrayStatus = ['Pressure'] ExtractSubset0 = ExtractSubset(guiName="ExtractSubset0",IncludeBoundary=0,VOI=[399, 399, 0, 0, 0, 799], SampleRateK=1, SampleRateJ=1, SampleRateI=1) ExtractSubset0.UpdatePipeline() data = servermanager.Fetch(ExtractSubset0) print ExtractSubset0.GetDataInformation().GetNumberOfPoints() numPoints=data.GetNumberOfPoints() print numPoints p = np.zeros(numPoints) coord = np.zeros((numPoints,3)) for j in range(0,numPoints): coord[j,:] = np.array(data.GetPoint(j)) p[j]=data.GetPointData().GetArray("Pressure").GetValue(j) pl.plot(coord[:,2], p,linewidth=2.0) pl.xlabel('Position Along Length (m)',size = 20) pl.ylabel('Pore pressure (MPa)', size = 20) pl.ticklabel_format(axis='y', style='sci', scilimits=(-2,2)) pl.legend(['t = 10 s','t = 50 s','t = 90 s', 't = 130 s', 't = 184 s', 't = 250 s', 't = 300 s', 't = 350', 't = 400 s', 't = 500 s'],'best',loc='upper left', numpoints=1, prop={'size':16}) pl.savefig('pressures.pdf') On Mon, Nov 3, 2014 at 9:00 AM, Utkarsh Ayachit wrote: > Hi, > > I wonder if the problem is with Fetch(). What does the following yeild? > > ExtractSubset0.UpdatePipeline() > print ExtractSubset0.GetDataInformation().GetNumberOfPoints() > > Utkarsh > > On Thu, Oct 30, 2014 at 5:29 PM, Chukwudi Chukwudozie > wrote: > > Hi, > > > > I have a structured grid computational domain of size 800,2,800. I want > to > > extract the information along a line and so I do the following in my > python > > script. > > > > ExtractSubset0 = > > ExtractSubset(guiName="ExtractSubset0",IncludeBoundary=0,VOI=[399, 399, > 0, > > 0, 0, 799], SampleRateK=1, SampleRateJ=1, SampleRateI=1) > > data = servermanager.Fetch(ExtractSubset0) > > numPoints=data.GetNumberOfPoints() > > > > However, when I plot the information on that line, I see it has only > > extracted information between 0-399 in the z-coordinate direction. I even > > printed numPoints to confirm how much information is extracted and I get > > "numPoints=400". I am using PV 3.98.0. > > > > Any help on this will be appreciated. > > > > > > > > > > -- > > Chukwudi Chukwudozie > > cchukw1 at tigers.lsu.edu > > Craft and Hawkins Department of Petroleum Engineering > > Louisiana State University > > Patrick F. Taylor Hall (CEBA) > > Room 3429 > > Baton Rouge LA, 70803 > > Cell:3373546822 > > Office: 2255786064 > > > > _______________________________________________ > > Powered by www.kitware.com > > > > Visit other Kitware open-source projects at > > http://www.kitware.com/opensource/opensource.html > > > > Please keep messages on-topic and check the ParaView Wiki at: > > http://paraview.org/Wiki/ParaView > > > > Follow this link to subscribe/unsubscribe: > > http://public.kitware.com/mailman/listinfo/paraview > > > -- Chukwudi Chukwudozie cchukw1 at tigers.lsu.edu Craft and Hawkins Department of Petroleum Engineering Louisiana State University Patrick F. Taylor Hall (CEBA) Room 3429 Baton Rouge LA, 70803 Cell:3373546822 Office: 2255786064 -------------- next part -------------- An HTML attachment was scrubbed... URL: From jlih at masonlive.gmu.edu Mon Nov 3 22:17:22 2014 From: jlih at masonlive.gmu.edu (jlih) Date: Tue, 4 Nov 2014 03:17:22 +0000 Subject: [Paraview] Possibilities of using different color ramps for different extractions of the same dataset? Message-ID: <1415071039128.66490@masonlive.gmu.edu> Dear all, I am creating extractions from a NetCDF data. I am wondering if I can create separate color ramps for different extractions of the same array for comparisons. I tried the process within Paraview Desktop but I was not able to set different color ramps because the array name is the same for all extractions. Sample code: SetActiveSource(ncreader) ExtractSubset1 = ExtractSubset() ExtractSubset1.VOI = [0, 50,0, 50,0, 8] DataRepresentation1 = Show(ExtractSubset1) DataRepresentation1.Representation = 'Volume' DataRepresentation1.ColorArrayName = ('CELL_DATA', varname) DataRepresentation1.ColorAttributeType = 'CELL_DATA' DataRepresentation1.LookupTable = GetLookupTableForArray(?varname... Any suggestions? Thanks, Jing -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave.demarle at kitware.com Tue Nov 4 08:34:27 2014 From: dave.demarle at kitware.com (David E DeMarle) Date: Tue, 4 Nov 2014 08:34:27 -0500 Subject: [Paraview] Say hello to Kitware at IEEE SC 2014 Message-ID: Greetings lists, We hope to see many of you at this year's Supercomputing conference two weeks from now in New Orleans. If you are at the conference, please take some time to stop by our booth say hello and tell us about your successes and chalenges with VTK, ParaView and the rest. If you are in the market for a career at Kitware don't forget to bring your resume along. Besides the booth, Kitware will be involved in SC14 in the following presentations, tutorials, videos, and invited talks that we invite you to participate in. - ?Large Scale Visualization with ParaView? ? Who: Kenneth Moreland (Sandia National Laboratories), W. Alan Scott (Sandia National Laboratories), David E. DeMarle (Kitware), Joseph Insley (Argonne National Laboratory), Ollie Lo (Los Alamos National Laboratory), Robert Maynard (Kitware), and Sebastien Jourdain (Kitware) ? What: Tutorial ? When: November 16, 2014, from 8:30 am to 5:00 pm ? Where: Room 389 - ?In Situ MPAS-Ocean Image-based Visualization *?* ? Who: James Aherns (Los Alamos National Laboratory), Sebastien Jourdain (Kitware), Patrick O'Leary (Kitware), John Patchett (Los Alamos National Laboratory), David Rogers (Los Alamos National Laboratory), Patricia Fasel (Los Alamos National Laboratory), Andrew Bauer (Kitware), Mark Petersen (Los Alamos National Laboratory), Francesca Samsel (University of Texas at Austin), and Benjamin Boeckel (Kitware) ? What: Visualization and Data Analytics Showcase ? When: November 16, 2014, from 10:30 am to 12:00 pm ? Where: Rooms 386-87 - ?Sustainable Software Ecosystems: Software Engineers, Domain Scientists, and Engineers Collaborating for Science *?* *? *Who: Marcus Hanwell *(Kitware), Patrick O'Leary (Kitware), and *Bob O'Bara *(Kitware)* ? *What:* 2nd Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2) ? When: November 16, 2014 ? Where: Rooms 275-77 - ?In Situ Data Analysis and Visualization with ParaView Catalyst? ? Who: David H. Rogers (LANL), Nathan Fabian (Sandia National Laboratory), Thierry Carrard (French Alternative Energies and Atomic Energy Commission), and Andrew Bauer (Kitware) ? What: Tutorial ? When: November 17, 2014, from 8:30 am to 12:00 pm ? Where: Room 394 - ?An Image-Based Approach to Extreme Scale In Situ Visualization and Analysis ? ? Who: *James Ahrens (Los Alamos National Laboratory), Sebastien Jourdain (Kitware), Patrick O?Leary (Kitware), John Patchett (Los Alamos National Laboratory), David H. Rogers (Los Alamos National Laboratory), and Mark Petersen (Los Alamos National Laboratory)* ? What: Big Data Analysis Session ? When: November 19, 2014, from 11:30 am to 12:00 pm ? Where: Rooms 391-92 - "VTK-M: Uniting GPU Acceleration Successes" ? Who: Robert Maynard (Kitware) ? What: Invited talk ? When: November 19, 2014, from 3:00 pm to 3:30 pm ? Where: NVIDIA booth - "Next Generation Computing and Rendering Infrastructure in VTK and ParaView" ? Who: Utkarsh Ayachit (Kitware) ? What: Intel Theater Presentation ? When: TBA - Kitware will also host presentations from collaborators at its booth throughout the conference. Featured presenters include Alejandro Ribes (*?lectricit? de France*), Sean Ziegler (Engility Corporation), Eric Whiting (Idaho National Laboratory), Kenneth Moreland (Sandia National Laboratories), John Biddiscombe (CSCS Swiss National Supercomputing Centre), Paul Navratil (Texas Advanced Computing Center), Joe Insley (Argonne National Laboratory), Jim Jeffers (Intel), and Alan Scott (Sandia National Laboratories). Details on the presentation schedule will follow. For additional information and presentation abstracts, please visit our event listing . David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 -------------- next part -------------- An HTML attachment was scrubbed... URL: From utkarsh.ayachit at kitware.com Tue Nov 4 12:18:17 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Tue, 4 Nov 2014 12:18:17 -0500 Subject: [Paraview] PointSprite_Plugin not displaying textures on ParaView 4.2.0 Mac OSX 10.10 In-Reply-To: References: Message-ID: This should now be fixed in git/master. Utkarsh On Sun, Oct 26, 2014 at 12:02 PM, Utkarsh Ayachit wrote: > Matei, > > I was indeed able to reproduce the issue. I've reported a bug [1]. > We'll track it down soon. > > Utkarsh > > [1] http://www.paraview.org/Bug/view.php?id=15078 > > On Fri, Oct 24, 2014 at 4:20 PM, Matei Stroila wrote: >> Hi, >> >> I believe this is a bug: >> The PointSprite_Plugin with ParaView 4.2.0 does not display textures (same textures that ParaView 4.1.0 can display on same machine with OS X 10.10. .) >> The texture seems to be loaded but it is not displayed. >> >> I used the release from this link: >> http://www.paraview.org/paraview-downloads/download.php?submit=Download&version=v4.2&type=binary&os=osx&downloadFile=ParaView-4.2.0-Darwin-64bit.dmg >> >> Same behavior with ParaView built on the same machine from the ParaView 4.2.0 sources. >> >> >> Thanks, >> Matei >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview From wascott at sandia.gov Tue Nov 4 14:58:19 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Tue, 4 Nov 2014 19:58:19 +0000 Subject: [Paraview] [EXTERNAL] Possibilities of using different color ramps for different extractions of the same dataset? In-Reply-To: <1415071039128.66490@masonlive.gmu.edu> References: <1415071039128.66490@masonlive.gmu.edu> Message-ID: Your question obviously has to do with python scripts, however in ParaView this can be done using the Calculator filter. We just create another copy of the data with a different name ? and then ParaView will allow you to use a different color table for this second array. Could you do something like that? Or, did I miss your point? Alan From: ParaView [mailto:paraview-bounces at paraview.org] On Behalf Of jlih Sent: Monday, November 03, 2014 8:17 PM To: paraview at paraview.org Subject: [EXTERNAL] [Paraview] Possibilities of using different color ramps for different extractions of the same dataset? Dear all, I am creating extractions from a NetCDF data. I am wondering if I can create separate color ramps for different extractions of the same array for comparisons. I tried the process within Paraview Desktop but I was not able to set different color ramps because the array name is the same for all extractions. Sample code: SetActiveSource(ncreader) ExtractSubset1 = ExtractSubset() ExtractSubset1.VOI = [0, 50,0, 50,0, 8] DataRepresentation1 = Show(ExtractSubset1) DataRepresentation1.Representation = 'Volume' DataRepresentation1.ColorArrayName = ('CELL_DATA', varname) DataRepresentation1.ColorAttributeType = 'CELL_DATA' DataRepresentation1.LookupTable = GetLookupTableForArray(?varname... Any suggestions? Thanks, Jing -------------- next part -------------- An HTML attachment was scrubbed... URL: From jlih at masonlive.gmu.edu Tue Nov 4 15:09:56 2014 From: jlih at masonlive.gmu.edu (jlih) Date: Tue, 4 Nov 2014 20:09:56 +0000 Subject: [Paraview] [EXTERNAL] Possibilities of using different color ramps for different extractions of the same dataset? In-Reply-To: References: <1415071039128.66490@masonlive.gmu.edu>, Message-ID: <1415131795361.95240@masonlive.gmu.edu> Yes. I just checked the Calculator function and it seems worked. I will try to experience more with the tool. Thanks very much! Jing ________________________________ From: Scott, W Alan Sent: Tuesday, November 4, 2014 2:58 PM To: jlih; paraview at paraview.org Subject: RE: [EXTERNAL] [Paraview] Possibilities of using different color ramps for different extractions of the same dataset? Your question obviously has to do with python scripts, however in ParaView this can be done using the Calculator filter. We just create another copy of the data with a different name - and then ParaView will allow you to use a different color table for this second array. Could you do something like that? Or, did I miss your point? Alan From: ParaView [mailto:paraview-bounces at paraview.org] On Behalf Of jlih Sent: Monday, November 03, 2014 8:17 PM To: paraview at paraview.org Subject: [EXTERNAL] [Paraview] Possibilities of using different color ramps for different extractions of the same dataset? Dear all, I am creating extractions from a NetCDF data. I am wondering if I can create separate color ramps for different extractions of the same array for comparisons. I tried the process within Paraview Desktop but I was not able to set different color ramps because the array name is the same for all extractions. Sample code: SetActiveSource(ncreader) ExtractSubset1 = ExtractSubset() ExtractSubset1.VOI = [0, 50,0, 50,0, 8] DataRepresentation1 = Show(ExtractSubset1) DataRepresentation1.Representation = 'Volume' DataRepresentation1.ColorArrayName = ('CELL_DATA', varname) DataRepresentation1.ColorAttributeType = 'CELL_DATA' DataRepresentation1.LookupTable = GetLookupTableForArray(?varname... Any suggestions? Thanks, Jing -------------- next part -------------- An HTML attachment was scrubbed... URL: From mike.jackson at bluequartz.net Wed Nov 5 11:30:19 2014 From: mike.jackson at bluequartz.net (Michael Jackson) Date: Wed, 5 Nov 2014 11:30:19 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 Message-ID: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. Thanks Mike Jackson From utkarsh.ayachit at kitware.com Wed Nov 5 11:38:07 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Wed, 5 Nov 2014 11:38:07 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> Message-ID: Sounds good. I'll work on updating the HDF5 version for next release. http://www.paraview.org/Bug/view.php?id=15106 Utkarsh On Wed, Nov 5, 2014 at 11:30 AM, Michael Jackson wrote: > The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? > > BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. > > Thanks > Mike Jackson > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From mike.jackson at bluequartz.net Wed Nov 5 12:06:28 2014 From: mike.jackson at bluequartz.net (Michael Jackson) Date: Wed, 5 Nov 2014 12:06:28 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> Message-ID: Thanks for getting the bug report in. I was poking around the ParaView source and it does not look straight forward at all to substitute in a prebuilt HDF5 library (system hdf5). I can not even find the CMake Variables that might let me do this. I tried so simply substitute the latest stable HDF5 into the source tree but as I figured CMake threw lots of errors. If you give me a gentle nudge I might be able to help a bit. We are really being held back by this with our current data sets. Thanks Mike Jackson On Nov 5, 2014, at 11:38 AM, Utkarsh Ayachit wrote: > Sounds good. I'll work on updating the HDF5 version for next release. > > http://www.paraview.org/Bug/view.php?id=15106 > > Utkarsh > > On Wed, Nov 5, 2014 at 11:30 AM, Michael Jackson > wrote: >> The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? >> >> BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. >> >> Thanks >> Mike Jackson >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview From utkarsh.ayachit at kitware.com Wed Nov 5 12:13:21 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Wed, 5 Nov 2014 12:13:21 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> Message-ID: Mike, Are you talking about updating the HDF5 in ParaView source itself or in the binaries we distribute? Utkarsh On Wed, Nov 5, 2014 at 12:06 PM, Michael Jackson wrote: > Thanks for getting the bug report in. I was poking around the ParaView source and it does not look straight forward at all to substitute in a prebuilt HDF5 library (system hdf5). I can not even find the CMake Variables that might let me do this. I tried so simply substitute the latest stable HDF5 into the source tree but as I figured CMake threw lots of errors. If you give me a gentle nudge I might be able to help a bit. We are really being held back by this with our current data sets. > > Thanks > Mike Jackson > > On Nov 5, 2014, at 11:38 AM, Utkarsh Ayachit wrote: > >> Sounds good. I'll work on updating the HDF5 version for next release. >> >> http://www.paraview.org/Bug/view.php?id=15106 >> >> Utkarsh >> >> On Wed, Nov 5, 2014 at 11:30 AM, Michael Jackson >> wrote: >>> The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? >>> >>> BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. >>> >>> Thanks >>> Mike Jackson >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview > From arovinel at purdue.edu Wed Nov 5 12:42:12 2014 From: arovinel at purdue.edu (Rovinelli, Andrea) Date: Wed, 5 Nov 2014 17:42:12 +0000 Subject: [Paraview] Sparse Cell Data in a 3DCoRectMesh Message-ID: <739B83A0-AFA1-48AF-B659-BE596E5D7731@purdue.edu> Hello, I have a set of sparse cell data that i want to visualize as cells. the idea is : 1 create a 3d corectangular grid 2 create a subset grid 3 assign attributes to the new subset I want to select the cells that contain data utilizing a subset of grid. Utilizing the xdmf website wrote this peace of code 0 0 0 1 1 1 0 2 /Xdmf/Domain/Grid/Grid[@Name="hole domain"] 100 150 Unfortunately wasn?t able to make it work Any Idea and/or help would be appreciated Thanks Andrea Rovinelli From mike.jackson at bluequartz.net Wed Nov 5 14:03:23 2014 From: mike.jackson at bluequartz.net (Michael Jackson) Date: Wed, 5 Nov 2014 14:03:23 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> Message-ID: I was trying to directly update the source codes then compile my own. That didn't work. I was able to build ParaView 4.2.0 against my installed HDF5 (1.8.13) and have it create the package in the /Applications BUT not all the libraries got "fixed up". The Qt libraries and my HDF5 libraries did not get their "install_name" fixed. Do I need to build from the "SuperBuild" to actually create a new package I can give to my employees? Thanks Mike Jackson On Nov 5, 2014, at 12:13 PM, Utkarsh Ayachit wrote: > Mike, > > Are you talking about updating the HDF5 in ParaView source itself or > in the binaries we distribute? > > Utkarsh > > On Wed, Nov 5, 2014 at 12:06 PM, Michael Jackson > wrote: >> Thanks for getting the bug report in. I was poking around the ParaView source and it does not look straight forward at all to substitute in a prebuilt HDF5 library (system hdf5). I can not even find the CMake Variables that might let me do this. I tried so simply substitute the latest stable HDF5 into the source tree but as I figured CMake threw lots of errors. If you give me a gentle nudge I might be able to help a bit. We are really being held back by this with our current data sets. >> >> Thanks >> Mike Jackson >> >> On Nov 5, 2014, at 11:38 AM, Utkarsh Ayachit wrote: >> >>> Sounds good. I'll work on updating the HDF5 version for next release. >>> >>> http://www.paraview.org/Bug/view.php?id=15106 >>> >>> Utkarsh >>> >>> On Wed, Nov 5, 2014 at 11:30 AM, Michael Jackson >>> wrote: >>>> The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? >>>> >>>> BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. >>>> >>>> Thanks >>>> Mike Jackson >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >> From utkarsh.ayachit at kitware.com Wed Nov 5 15:13:41 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Wed, 5 Nov 2014 15:13:41 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> Message-ID: Yes, to create "redistributable" binaries, Superbuild would be the way to go. The ParaVIew superbuild already uses hdf5 1.8.9 Do you know if that recent enough? Utkarsh On Wed, Nov 5, 2014 at 2:03 PM, Michael Jackson wrote: > I was trying to directly update the source codes then compile my own. That didn't work. I was able to build ParaView 4.2.0 against my installed HDF5 (1.8.13) and have it create the package in the /Applications BUT not all the libraries got "fixed up". The Qt libraries and my HDF5 libraries did not get their "install_name" fixed. > > Do I need to build from the "SuperBuild" to actually create a new package I can give to my employees? > > Thanks > Mike Jackson > > On Nov 5, 2014, at 12:13 PM, Utkarsh Ayachit wrote: > >> Mike, >> >> Are you talking about updating the HDF5 in ParaView source itself or >> in the binaries we distribute? >> >> Utkarsh >> >> On Wed, Nov 5, 2014 at 12:06 PM, Michael Jackson >> wrote: >>> Thanks for getting the bug report in. I was poking around the ParaView source and it does not look straight forward at all to substitute in a prebuilt HDF5 library (system hdf5). I can not even find the CMake Variables that might let me do this. I tried so simply substitute the latest stable HDF5 into the source tree but as I figured CMake threw lots of errors. If you give me a gentle nudge I might be able to help a bit. We are really being held back by this with our current data sets. >>> >>> Thanks >>> Mike Jackson >>> >>> On Nov 5, 2014, at 11:38 AM, Utkarsh Ayachit wrote: >>> >>>> Sounds good. I'll work on updating the HDF5 version for next release. >>>> >>>> http://www.paraview.org/Bug/view.php?id=15106 >>>> >>>> Utkarsh >>>> >>>> On Wed, Nov 5, 2014 at 11:30 AM, Michael Jackson >>>> wrote: >>>>> The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? >>>>> >>>>> BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. >>>>> >>>>> Thanks >>>>> Mike Jackson >>>>> _______________________________________________ >>>>> Powered by www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>> > From LAWRENCE.ANDERSON at utoledo.edu Wed Nov 5 15:12:12 2014 From: LAWRENCE.ANDERSON at utoledo.edu (Anderson, Lawrence S.) Date: Wed, 5 Nov 2014 20:12:12 +0000 Subject: [Paraview] volume color transfer table. Message-ID: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu> hi- i have seen this question on various blogs, but not the answer in a usable form for me... i provide project data to paraview via vtk legacy files in ascii. the default color mapping functions provided by paraview do not decouple opacity from color, so i am providing my own look_up table of RGBa values organized in such a way that i can apply different opacities to the same color, and different colors to the same opacity. it works for surface rendering, but not for volume rendering- i.e. when choosing the volume option, the rendering reverts back to one of the default tables. how do i apply my scalar color table in the vtk file to volumes? i could laboriously enter 120x4 values into the paraview mapping editor, but that seems silly... thank you! and as i am new to paraview and this list mail option, feel free to refer me to an old post. -lawrence anderson, university of toledo -------------- next part -------------- An HTML attachment was scrubbed... URL: From mike.jackson at bluequartz.net Wed Nov 5 15:39:23 2014 From: mike.jackson at bluequartz.net (Michael Jackson) Date: Wed, 5 Nov 2014 15:39:23 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> Message-ID: <7699AAD7-3B25-439B-9BBD-4AE68C3548C6@bluequartz.net> Not recent enough. I think that was the version where I found the bug for Darwin systems which limited it to 4GB data sets. That version is also about 2-3 years old. HDF5 1.8.13 is the latest. 1.8.14 is coming out in few weeks. Mike Jackson PS: We are just trying to get everyone to build ParaView on their systems. The issue with the SuperBuild is that you can not seem to set an "external" hdf5 build. It will always use the bundled version. On Nov 5, 2014, at 3:13 PM, Utkarsh Ayachit wrote: > Yes, to create "redistributable" binaries, Superbuild would be the way > to go. The ParaVIew superbuild already uses hdf5 1.8.9 Do you know if > that recent enough? > > Utkarsh > > On Wed, Nov 5, 2014 at 2:03 PM, Michael Jackson > wrote: >> I was trying to directly update the source codes then compile my own. That didn't work. I was able to build ParaView 4.2.0 against my installed HDF5 (1.8.13) and have it create the package in the /Applications BUT not all the libraries got "fixed up". The Qt libraries and my HDF5 libraries did not get their "install_name" fixed. >> >> Do I need to build from the "SuperBuild" to actually create a new package I can give to my employees? >> >> Thanks >> Mike Jackson >> >> On Nov 5, 2014, at 12:13 PM, Utkarsh Ayachit wrote: >> >>> Mike, >>> >>> Are you talking about updating the HDF5 in ParaView source itself or >>> in the binaries we distribute? >>> >>> Utkarsh >>> >>> On Wed, Nov 5, 2014 at 12:06 PM, Michael Jackson >>> wrote: >>>> Thanks for getting the bug report in. I was poking around the ParaView source and it does not look straight forward at all to substitute in a prebuilt HDF5 library (system hdf5). I can not even find the CMake Variables that might let me do this. I tried so simply substitute the latest stable HDF5 into the source tree but as I figured CMake threw lots of errors. If you give me a gentle nudge I might be able to help a bit. We are really being held back by this with our current data sets. >>>> >>>> Thanks >>>> Mike Jackson >>>> >>>> On Nov 5, 2014, at 11:38 AM, Utkarsh Ayachit wrote: >>>> >>>>> Sounds good. I'll work on updating the HDF5 version for next release. >>>>> >>>>> http://www.paraview.org/Bug/view.php?id=15106 >>>>> >>>>> Utkarsh >>>>> >>>>> On Wed, Nov 5, 2014 at 11:30 AM, Michael Jackson >>>>> wrote: >>>>>> The current version of ParaView (4.2.1) uses a fairly old version of HDF5 (API version 1.8.9). This version has a nasty bug on OS X that will not allow HDF5 to read a data set that is larger than 4GB (2^32). This is due to a bug in the configuration process that incorrectly identifies a "size_t" as being unsigned 32 bit integer on Darwin instead of a 64 bit unsigned integer. What is the possibility of getting a newer HDF5 included in ParaView for the next release? >>>>>> >>>>>> BTW. a new release of HDF5 is coming in a few weeks. This would make a great opportunity to get this fixed with the latest version of HDF5. >>>>>> >>>>>> Thanks >>>>>> Mike Jackson >>>>>> _______________________________________________ >>>>>> Powered by www.kitware.com >>>>>> >>>>>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >>>>>> >>>>>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >>>>>> >>>>>> Follow this link to subscribe/unsubscribe: >>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >> From utkarsh.ayachit at kitware.com Wed Nov 5 16:01:17 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Wed, 5 Nov 2014 16:01:17 -0500 Subject: [Paraview] Data set Size limit in ParaView/HDF5 In-Reply-To: <7699AAD7-3B25-439B-9BBD-4AE68C3548C6@bluequartz.net> References: <2384A91D-BD55-4521-8397-C535CED4D872@bluequartz.net> <7699AAD7-3B25-439B-9BBD-4AE68C3548C6@bluequartz.net> Message-ID: > Not recent enough. Noted. > PS: We are just trying to get everyone to build ParaView on their systems. The issue with the SuperBuild is that you can not seem to set an "external" hdf5 build. It will always use the bundled version. There's a topic awaiting review to fix that. So you should be able to use "external hdf5" soon. Utkarsh From zhz1993622 at 163.com Wed Nov 5 22:20:38 2014 From: zhz1993622 at 163.com (=?GBK?B?1ty649ba?=) Date: Thu, 6 Nov 2014 11:20:38 +0800 (CST) Subject: [Paraview] The use of paraview's parallel In-Reply-To: References: Message-ID: <3f6d753.1349b.149831e41ed.Coremail.zhz1993622@163.com> I'm a fresh man in paraview.I use the paraview by the way of compiling.I want to use paraview to realize the rendering of large data . But now I find a problem .when I use paraview in paralleling ,it seems that the first node's pressure is very big .It should use more than the size of the data ,but the others node only use a little memory .So in this way ,it dosen't share the datas to all the node,I use many computers ,but it can't mange large datas .The first node should read all of the large data.So I suspect that what the use of paraview's parallel . I read some news of your paraview ,you say that it can deal with large datas .I want to konw how to do it .I have compiled the paraview's source code with cmake,mpi ,qt,python cuda .And I have used the mpi to realise the parallel.In the client of mpi ,I can see many nodes , and I use the nfs to share files ,all the nodes can read files in a computer.Then i want to konw what the problems of my configuration .Who can help me .Thank you. zhou -------------- next part -------------- An HTML attachment was scrubbed... URL: From oshima at eng.niigata-u.ac.jp Thu Nov 6 04:02:12 2014 From: oshima at eng.niigata-u.ac.jp (Takuya OSHIMA) Date: Thu, 06 Nov 2014 18:02:12 +0900 (JST) Subject: [Paraview] Shapefiles? In-Reply-To: <7F781841FF1E044388AFA42B70703A7A8A0089EC@CHIMBX6.ad.uillinois.edu> References: <7F781841FF1E044388AFA42B70703A7A8A0089EC@CHIMBX6.ad.uillinois.edu> Message-ID: <20141106.180212.214765682.oshima@eng.niigata-u.ac.jp> Hi Mark, vtkGDALVectorReader has been in the ParaView source tree for quite a while. You however have to explicitly turn on the reader by CMake configuration (Module_vtkIOGDAL) and build ParaView with GDAL. Furthermore, you need to write a simple XML plugin and load it to expose the reader to the ParaView GUI. If it works, you can use GDALVectorReaderSM.xml in the vtkgis_vector_reader repository instead. Takuya OSHIMA, Ph.D. Faculty of Engineering, Niigata University 8050 Ikarashi-Ninocho, Nishi-ku, Niigata, 950-2181, JAPAN From: "Vanmoer, Mark W" Subject: [Paraview] Shapefiles? Date: Thu, 30 Oct 2014 21:57:15 +0000 > Hi ParaView, > > I found this thread: www.paraview.org/pipermail/paraview/2012-December/027026.html indicating vtkGDALVectorReader would be added to mainline ParaView, and I do see an option load DEMs, but are ESRI ShapeFiles supported? I can't get any .shp files to be recognized or load. > > There's an earlier thread from 2011 discussing vtkgis_vector_reader, is that still the recommended ShapeFile loader? > > Thanks, > Mark From g.brito at aia.rwth-aachen.de Thu Nov 6 07:52:56 2014 From: g.brito at aia.rwth-aachen.de (Gonzalo Brito Gadeschi) Date: Thu, 6 Nov 2014 13:52:56 +0100 Subject: [Paraview] Passing group of flags to all TUs Message-ID: I'm trying to install paraview from source using: CC=clang CXX=clang++ CXXFLAGS="-nostdinc++ -stdlib=libc++ -I${LIBCXX_INCLUDE} -L${LIBCXX_LIB}" cmake $PV_SRC \ -DBUILD_DOCUMENTATION:BOOL=ON \ -DBUILD_SHARED_LIBS:BOOL=ON \ -DCMAKE_BUILD_TYPE:STRING=Release \ -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX \ -DPARAVIEW_ENABLE_PYTHON:BOOL=ON \ -DPARAVIEW_INSTALL_DEVELOPMENT_FILES:BOOL=ON \ -DPARAVIEW_USE_MPI:BOOL=ON \ -DPARAVIEW_ENABLE_FFMPEG:BOOL=ON \ -DVTK_SMP_IMPLEMENTATION_TYPE:STRING=TBB \ -DCMAKE_CXX_FLAGS="-nostdinc++ -stdlib=libc++ -I${LIBCXX_INCLUDE} -L${LIBCXX_LIB}" \ -DMPI_CXX_COMPILE_FLAGS="-nostdinc++ -stdlib=libc++ -I${LIBCXX_INCLUDE} -L${LIBCXX_LIB}" Everything works fine up to the point where it tries to compile VTK/ThirdParty/netcdf: [ 21%] Building CXX object VTK/ThirdParty/netcdf/vtknetcdf/CMakeFiles/vtkNetCDF_cxx.dir/cxx/netcdf.cpp.o src/env/paraview_src/VTK/ThirdParty/netcdf/vtknetcdf/cxx/netcdf.cpp:13:10: fatal error: 'iostream' file not found #include ^ 1 error generated. make[2]: *** [VTK/ThirdParty/netcdf/vtknetcdf/CMakeFiles/vtkNetCDF_cxx.dir/cxx/netcdf.cpp.o] Error 1 make[1]: *** [VTK/ThirdParty/netcdf/vtknetcdf/CMakeFiles/vtkNetCDF_cxx.dir/all] Error 2 make[1]: *** Waiting for unfinished jobs.... A make VERBOSE=1 reveals that CMake does not pass the CXXFLAGS I've specified when compiling netcdf.cpp. Since the include directories of the standard library are missing, compilation fails. Am I setting the compilation flags correctly (CXXFLAGS, DCMAKE_CXX_FLAGS, DMPI_CXX_FLAGS..) ? How do I pass a group of flags to all translation units? -- Dipl.-Ing. Gonzalo Brito Gadeschi Institute of Aerodynamics and Chair of Fluid Mechanics RWTH Aachen University Wuellnerstra?e 5a D-52062 Aachen Germany Phone: ++49-(0)241-80-94821 Fax: ++49-(0)241-80-92257 E-mail: g.brito at aia.rwth-aachen.de Internet: www.aia.rwth-aachen.de -------------- next part -------------- An HTML attachment was scrubbed... URL: From daniel.lister at geomechanica.com Thu Nov 6 09:42:49 2014 From: daniel.lister at geomechanica.com (Daniel Lister) Date: Thu, 06 Nov 2014 09:42:49 -0500 Subject: [Paraview] Default filter specification Message-ID: <545B88E9.2080306@geomechanica.com> Hi All, I have a program that outputs data to be visualized in paraview in the vtu file format. Whenever anyone is viewing this data they always use a specific filter. I was wondering if there is a way to specify this filter in the input file so that they do not need to apply in every time they open a new file. Thanks for your help. -Daniel From mvanmoer at illinois.edu Thu Nov 6 11:14:00 2014 From: mvanmoer at illinois.edu (Vanmoer, Mark W) Date: Thu, 6 Nov 2014 16:14:00 +0000 Subject: [Paraview] Shapefiles? In-Reply-To: <20141106.180212.214765682.oshima@eng.niigata-u.ac.jp> References: <7F781841FF1E044388AFA42B70703A7A8A0089EC@CHIMBX6.ad.uillinois.edu> <20141106.180212.214765682.oshima@eng.niigata-u.ac.jp> Message-ID: <7F781841FF1E044388AFA42B70703A7A8A01199E@CHIMBX6.ad.uillinois.edu> Hi Takuya, Thank you, enabling the module and writing the XML worked fine. Mark -----Original Message----- From: ParaView [mailto:paraview-bounces at paraview.org] On Behalf Of Takuya OSHIMA Sent: Thursday, November 06, 2014 3:02 AM To: paraview at paraview.org Subject: Re: [Paraview] Shapefiles? Hi Mark, vtkGDALVectorReader has been in the ParaView source tree for quite a while. You however have to explicitly turn on the reader by CMake configuration (Module_vtkIOGDAL) and build ParaView with GDAL. Furthermore, you need to write a simple XML plugin and load it to expose the reader to the ParaView GUI. If it works, you can use GDALVectorReaderSM.xml in the vtkgis_vector_reader repository instead. Takuya OSHIMA, Ph.D. Faculty of Engineering, Niigata University 8050 Ikarashi-Ninocho, Nishi-ku, Niigata, 950-2181, JAPAN From: "Vanmoer, Mark W" Subject: [Paraview] Shapefiles? Date: Thu, 30 Oct 2014 21:57:15 +0000 > Hi ParaView, > > I found this thread: www.paraview.org/pipermail/paraview/2012-December/027026.html indicating vtkGDALVectorReader would be added to mainline ParaView, and I do see an option load DEMs, but are ESRI ShapeFiles supported? I can't get any .shp files to be recognized or load. > > There's an earlier thread from 2011 discussing vtkgis_vector_reader, is that still the recommended ShapeFile loader? > > Thanks, > Mark _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview From yannic.eichler at hsu-hh.de Thu Nov 6 11:35:00 2014 From: yannic.eichler at hsu-hh.de (yannic.eichler at hsu-hh.de) Date: Thu, 06 Nov 2014 17:35:00 +0100 Subject: [Paraview] PDF-Export Message-ID: <20141106173500.7753247ejpn3eoms@webmail.unibw-hamburg.de> Hello, I?m working in the area of Numerical Computational Engineering and we want to use Paraview to visualize our simulation results. To add a scene from Paraview to a documentation we need to export this scene to a PDF-file. At the moment if we export, a PDF-file will be created, but opening this file an error occurs, the scene is grey-coloured and transparency is gone. I hope you could help me exporting a well-working PDF-File. Greetings Yannic Eichler From dave.demarle at kitware.com Thu Nov 6 11:46:04 2014 From: dave.demarle at kitware.com (David E DeMarle) Date: Thu, 6 Nov 2014 11:46:04 -0500 Subject: [Paraview] The use of paraview's parallel In-Reply-To: <3f6d753.1349b.149831e41ed.Coremail.zhz1993622@163.com> References: <3f6d753.1349b.149831e41ed.Coremail.zhz1993622@163.com> Message-ID: To test if paraview is using the entire set of nodes: * connect the client to the pvserver mpi job, * open up views->Memory inspector. You should then see as many processors as their are on the system, plus the client. Next create a Sources->Sphere and apply the Filters->Process Id scalars filter. There should be as many colors on the sphere as there are processors in the server. Increase the resolution on the sphere source if you have more than 8 nodes. * next open up your data file and use the the memory inspector and process id scalars filters to see how the reader chose to distribute the data. If it is all loaded on process 1, apply the D3 filter to redistribute it amongst all ranks. hope that helps David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Wed, Nov 5, 2014 at 10:20 PM, ??? wrote: > I'm a fresh man in paraview.I use the paraview by the way of compiling.I > want to use paraview to realize the rendering of large data . > But now I find a problem .when I use paraview in paralleling ,it > seems that the first node's pressure is very big .It should use more than > the size of the data ,but the others node only use a little memory .So in > this way ,it dosen't share the datas to all the node,I use many computers > ,but it can't mange large datas .The first node should read all of the > large data.So I suspect that what the use of paraview's parallel . > I read some news of your paraview ,you say that it can deal with > large datas .I want to konw how to do it .I have compiled the paraview's > source code with cmake,mpi ,qt,python cuda .And I have used the mpi to > realise the parallel.In the client of mpi ,I can see many nodes , and I > use the nfs to share files ,all the nodes can read files in a computer.Then > i want to konw what the problems of my configuration .Who can help me > .Thank you. > > > > zhou > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From david.lonie at kitware.com Thu Nov 6 11:49:46 2014 From: david.lonie at kitware.com (David Lonie) Date: Thu, 6 Nov 2014 11:49:46 -0500 Subject: [Paraview] PDF-Export In-Reply-To: <20141106173500.7753247ejpn3eoms@webmail.unibw-hamburg.de> References: <20141106173500.7753247ejpn3eoms@webmail.unibw-hamburg.de> Message-ID: What settings are you using for the export? This wiki page explains what the options do, and what the limitations of the exporter are: http://www.paraview.org/Wiki/ParaView/Vector_Graphics_Export The grey coloring sounds like there's a texture mapped surface being rendered, which cannot be exported unless the data is rasterized. Hope this helps, Dave On Thu, Nov 6, 2014 at 11:35 AM, wrote: > Hello, > > I?m working in the area of Numerical Computational Engineering and we want > to use Paraview to visualize our simulation results. To add a scene from > Paraview to a documentation we need to export this scene to a PDF-file. At > the moment if we export, a PDF-file will be created, but opening this file > an error occurs, the scene is grey-coloured and transparency is gone. I > hope you could help me exporting a well-working PDF-File. > > Greetings > > Yannic Eichler > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/ > opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > -------------- next part -------------- An HTML attachment was scrubbed... URL: From samuelkey at bresnan.net Thu Nov 6 13:11:34 2014 From: samuelkey at bresnan.net (Samuel Key) Date: Thu, 06 Nov 2014 11:11:34 -0700 Subject: [Paraview] Default filter specification In-Reply-To: <545B88E9.2080306@geomechanica.com> References: <545B88E9.2080306@geomechanica.com> Message-ID: <545BB9D6.1000005@bresnan.net> Daniel, Paraview (under the FILE drop-down menu) has a SAVE STATE/LOAD STATE feature. One starts by loading simulation results, Next, one uses the imaging capabilities and filters to get the information displayed that highlights the significant results. The final step is to use the FILE > SAVE STATE command; PV will write out the information it needs to recreate the desired display. When the FILE > LOAD STATE feature is used, it will first ask if the input results file (recorded by the SAVE STATE command) is the results file you want to use or do you want to access a different version of the simulation. Next, PV will proceed to read the designated simulation results file and recreate the desired display. Sam On 11/6/2014 7:42 AM, Daniel Lister wrote: > Hi All, > > I have a program that outputs data to be visualized in paraview in the > vtu file format. Whenever anyone is viewing this data they always use > a specific filter. I was wondering if there is a way to specify this > filter in the input file so that they do not need to apply in every > time they open a new file. Thanks for your help. > > -Daniel > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Fri Nov 7 08:57:13 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 7 Nov 2014 08:57:13 -0500 Subject: [Paraview] Saving pipeline object data as a .csv In-Reply-To: References: Message-ID: The ExodusII reader produces a multiblock dataset that can have empty blocks. As a result, those empty blocks get saved as blank csv files. You can apply the ExtractBlock filter to only pass through blocks of interest and then save that result, instead. Utkarsh On Mon, Nov 3, 2014 at 11:54 AM, John Mangeri wrote: > Hello all, > > I'm experiencing an issue that I'm fairly sure is just a simple option that > I have to change within my script or preferences > > When I save a filtered pipeline object(let's say a MeshQuality of an > ExodusII file), as MeshData1, the program will automatically generate > hundreds of .csv files. Most of them will be blank. For example, with a mesh > file with 339645 elements, will save a file MeshData1k.csv in increments of > 37116 for k = 0,1,2,3,...,9. It will also save 90 blank files afterwards. > > I would simply concatenate the tables but I have mesh files of radically > different geometries and materials blocks that I need to script; these end > up having different total mesh elements so the k range will not be the same > and the blank files also differ. > > Thanks > > John Mangeri > Univ. Connecticut > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Fri Nov 7 09:01:15 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 7 Nov 2014 09:01:15 -0500 Subject: [Paraview] volume color transfer table. In-Reply-To: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu> References: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu> Message-ID: To the best of my knowledge, the current volume mappers in VTK/ParaView need to use a color/opacity transfer functions. Aashish, is that changing with the new volume rendering code? Utkarsh On Wed, Nov 5, 2014 at 3:12 PM, Anderson, Lawrence S. wrote: > > hi- i have seen this question on various blogs, but not the answer in a > usable form for me... > i provide project data to paraview via vtk legacy files in ascii. the > default color mapping functions provided by paraview do not decouple opacity > from color, so i am providing my own look_up table of RGBa values organized > in such a way that i can apply different opacities to the same color, and > different colors to the same opacity. it works for surface rendering, but > not for volume rendering- i.e. when choosing the volume option, the > rendering reverts back to one of the default tables. how do i apply my > scalar color table in the vtk file to volumes? > i could laboriously enter 120x4 values into the paraview mapping editor, but > that seems silly... > thank you! > and as i am new to paraview and this list mail option, feel free to refer me > to an old post. > -lawrence anderson, university of toledo > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From david.lonie at kitware.com Fri Nov 7 09:17:19 2014 From: david.lonie at kitware.com (David Lonie) Date: Fri, 7 Nov 2014 09:17:19 -0500 Subject: [Paraview] PDF-Export In-Reply-To: References: <20141106173500.7753247ejpn3eoms@webmail.unibw-hamburg.de> <20141107144619.1145625pr8bn3h9n@webmail.unibw-hamburg.de> Message-ID: Forgot to CC the list: On Fri, Nov 7, 2014 at 9:16 AM, David Lonie wrote: > On Fri, Nov 7, 2014 at 8:46 AM, wrote: > >> Thank you for your fast reply. >> If tried different settings, but nothing really works. If i make a tick >> at rasterize 3D geometry the exported pdf also occurs an error and the >> shown graphic is kind of a bitmap graphic and not a real vector graphic >> like I need. You are rigth it isn?t grey-colored anymore. The errorin adobe >> acrobat reader is like: The graphic could not be presented correctly, >> please contact the producer of the file. >> > > We use an external library to produce the exports (gl2ps), and this is a > limitation on their side -- the textures that are used to color the data > cannot be detected by gl2ps, so the only way to get the colors to appear is > to rasterize the data. Indeed, this defeats the purpose of using a vector > format :-( > > There was a similar issue on the developer's list a few months ago, see > this thread: > > http://public.kitware.com/pipermail/paraview/2014-February/030639.html > > Is there a "Interpolate Scalars Before Mapping" option enabled in the > paraview properties panel? Disabling that will change how the colors are > stored, and seems to work around the texture issue. > > As for the client error, that's hard to track down without seeing the > file. By chance, do you have any multi-line text being rendered in your > scene? There was a bug (fixed in the development version now) that would > cause similar problems when exporting multiline text as a path. > > >> Is it possible that the problem depends on the code I use to convert my >> simulation results into a inp-file to visualize with Paraview. In Paraview >> I don?t get any errors and problems and everything works still fine, but >> maybe I have forgotten to add some kind of special code? >> > > Not likely. GL2PS works by watching the OpenGL feedback buffer -- > basically, it watches what is being drawn in the window and converts it > into a vector format. This is independent of the original data format. > > Dave > -------------- next part -------------- An HTML attachment was scrubbed... URL: From julie.baron at ingv.it Fri Nov 7 09:47:56 2014 From: julie.baron at ingv.it (Julie Baron) Date: Fri, 7 Nov 2014 15:47:56 +0100 Subject: [Paraview] multiple files with different geometries Message-ID: Hi, I want to see the data of two .vtk files in Paraview. One of the file is surface data (topography from SRTM, 45 000 points polydata) and the other one is a kernel file (20 millions points unstructured grid). I want the surface data on top of my kernel data. I can see each of them separately but not together. I thought it was due to their different geometries (x y z range) and I have applied a transform filter to translate the surface data but still, I cannot see the two dataset together: when I put Visible 'on' for the kernel data, my surface data disappears.. How can I deal with that? thank you, Julie -------------- next part -------------- An HTML attachment was scrubbed... URL: From LAWRENCE.ANDERSON at utoledo.edu Fri Nov 7 11:33:50 2014 From: LAWRENCE.ANDERSON at utoledo.edu (Anderson, Lawrence S.) Date: Fri, 7 Nov 2014 16:33:50 +0000 Subject: [Paraview] volume color transfer table. In-Reply-To: References: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu>, Message-ID: <99315C402367A747A66CC1A61AB72D6993F8243F@msgdb11.utad.utoledo.edu> thanks for the attention! I should also point out that i have tried the import/export options on the color table editing feature- opacity is not preserved. i.e. when i export a table to an xml file, the opacities all revert to 1.0, and when i import an xml file, any ' o="x.xx" ' value is ignored, and whatever opacity function in the editor from previous work is applied instead. cheers- -lawrence a. ________________________________________ From: Utkarsh Ayachit [utkarsh.ayachit at kitware.com] Sent: Friday, November 07, 2014 9:01 AM To: Anderson, Lawrence S.; Aashish Chaudhary Cc: paraview at paraview.org Subject: Re: [Paraview] volume color transfer table. To the best of my knowledge, the current volume mappers in VTK/ParaView need to use a color/opacity transfer functions. Aashish, is that changing with the new volume rendering code? Utkarsh On Wed, Nov 5, 2014 at 3:12 PM, Anderson, Lawrence S. wrote: > > hi- i have seen this question on various blogs, but not the answer in a > usable form for me... > i provide project data to paraview via vtk legacy files in ascii. the > default color mapping functions provided by paraview do not decouple opacity > from color, so i am providing my own look_up table of RGBa values organized > in such a way that i can apply different opacities to the same color, and > different colors to the same opacity. it works for surface rendering, but > not for volume rendering- i.e. when choosing the volume option, the > rendering reverts back to one of the default tables. how do i apply my > scalar color table in the vtk file to volumes? > i could laboriously enter 120x4 values into the paraview mapping editor, but > that seems silly... > thank you! > and as i am new to paraview and this list mail option, feel free to refer me > to an old post. > -lawrence anderson, university of toledo > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From burlen.loring at gmail.com Fri Nov 7 11:58:34 2014 From: burlen.loring at gmail.com (Burlen Loring) Date: Fri, 07 Nov 2014 08:58:34 -0800 Subject: [Paraview] volume color transfer table. In-Reply-To: <99315C402367A747A66CC1A61AB72D6993F8243F@msgdb11.utad.utoledo.edu> References: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu>, <99315C402367A747A66CC1A61AB72D6993F8243F@msgdb11.utad.utoledo.edu> Message-ID: <545CFA3A.6060306@gmail.com> that is indeed annoying, and would be very nice to be able to save the opacity table. A work around is use a state file. The opacity tables will be saved/restored. note: 4.2 has a bug in state file loading re: time. depending on your scenario you may need to use 4.1. On 11/07/2014 08:33 AM, Anderson, Lawrence S. wrote: > thanks for the attention! I should also point out that i have tried the import/export options on the color table editing feature- opacity is not preserved. i.e. when i export a table to an xml file, the opacities all revert to 1.0, and when i import an xml file, any ' o="x.xx" ' value is ignored, and whatever opacity function in the editor from previous work is applied instead. > cheers- > -lawrence a. > > ________________________________________ > From: Utkarsh Ayachit [utkarsh.ayachit at kitware.com] > Sent: Friday, November 07, 2014 9:01 AM > To: Anderson, Lawrence S.; Aashish Chaudhary > Cc: paraview at paraview.org > Subject: Re: [Paraview] volume color transfer table. > > To the best of my knowledge, the current volume mappers in > VTK/ParaView need to use a color/opacity transfer functions. Aashish, > is that changing with the new volume rendering code? > > Utkarsh > > On Wed, Nov 5, 2014 at 3:12 PM, Anderson, Lawrence S. > wrote: >> hi- i have seen this question on various blogs, but not the answer in a >> usable form for me... >> i provide project data to paraview via vtk legacy files in ascii. the >> default color mapping functions provided by paraview do not decouple opacity >> from color, so i am providing my own look_up table of RGBa values organized >> in such a way that i can apply different opacities to the same color, and >> different colors to the same opacity. it works for surface rendering, but >> not for volume rendering- i.e. when choosing the volume option, the >> rendering reverts back to one of the default tables. how do i apply my >> scalar color table in the vtk file to volumes? >> i could laboriously enter 120x4 values into the paraview mapping editor, but >> that seems silly... >> thank you! >> and as i am new to paraview and this list mail option, feel free to refer me >> to an old post. >> -lawrence anderson, university of toledo >> >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From utkarsh.ayachit at kitware.com Fri Nov 7 12:10:59 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 7 Nov 2014 12:10:59 -0500 Subject: [Paraview] volume color transfer table. In-Reply-To: <545CFA3A.6060306@gmail.com> References: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu> <99315C402367A747A66CC1A61AB72D6993F8243F@msgdb11.utad.utoledo.edu> <545CFA3A.6060306@gmail.com> Message-ID: Yes, that's a shortcoming of the current implementation. We'll plan to fix this by 4.4 or sooner. Utkarsh On Fri, Nov 7, 2014 at 11:58 AM, Burlen Loring wrote: > that is indeed annoying, and would be very nice to be able to save the > opacity table. A work around is use a state file. The opacity tables will be > saved/restored. note: 4.2 has a bug in state file loading re: time. > depending on your scenario you may need to use 4.1. > > > On 11/07/2014 08:33 AM, Anderson, Lawrence S. wrote: >> >> thanks for the attention! I should also point out that i have tried the >> import/export options on the color table editing feature- opacity is not >> preserved. i.e. when i export a table to an xml file, the opacities all >> revert to 1.0, and when i import an xml file, any ' o="x.xx" ' value is >> ignored, and whatever opacity function in the editor from previous work is >> applied instead. >> cheers- >> -lawrence a. >> >> ________________________________________ >> From: Utkarsh Ayachit [utkarsh.ayachit at kitware.com] >> Sent: Friday, November 07, 2014 9:01 AM >> To: Anderson, Lawrence S.; Aashish Chaudhary >> Cc: paraview at paraview.org >> Subject: Re: [Paraview] volume color transfer table. >> >> To the best of my knowledge, the current volume mappers in >> VTK/ParaView need to use a color/opacity transfer functions. Aashish, >> is that changing with the new volume rendering code? >> >> Utkarsh >> >> On Wed, Nov 5, 2014 at 3:12 PM, Anderson, Lawrence S. >> wrote: >>> >>> hi- i have seen this question on various blogs, but not the answer in a >>> usable form for me... >>> i provide project data to paraview via vtk legacy files in ascii. the >>> default color mapping functions provided by paraview do not decouple >>> opacity >>> from color, so i am providing my own look_up table of RGBa values >>> organized >>> in such a way that i can apply different opacities to the same color, and >>> different colors to the same opacity. it works for surface rendering, >>> but >>> not for volume rendering- i.e. when choosing the volume option, the >>> rendering reverts back to one of the default tables. how do i apply my >>> scalar color table in the vtk file to volumes? >>> i could laboriously enter 120x4 values into the paraview mapping editor, >>> but >>> that seems silly... >>> thank you! >>> and as i am new to paraview and this list mail option, feel free to refer >>> me >>> to an old post. >>> -lawrence anderson, university of toledo >>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview > > From wascott at sandia.gov Fri Nov 7 14:34:56 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Fri, 7 Nov 2014 19:34:56 +0000 Subject: [Paraview] [EXTERNAL] Re: volume color transfer table. In-Reply-To: References: <99315C402367A747A66CC1A61AB72D6993F81FAC@msgdb11.utad.utoledo.edu> <99315C402367A747A66CC1A61AB72D6993F8243F@msgdb11.utad.utoledo.edu> <545CFA3A.6060306@gmail.com> Message-ID: <549621360cb84e2f96dbeb0bd7154c15@ES05AMSNLNT.srn.sandia.gov> I will write it up. I found another bug in there. With regards to the state file loading and time bug, that has been fixed in Master (or the Nightly installs, take your pick). Alan -----Original Message----- From: ParaView [mailto:paraview-bounces at paraview.org] On Behalf Of Utkarsh Ayachit Sent: Friday, November 07, 2014 10:11 AM To: Burlen Loring Cc: Anderson, Lawrence S.; paraview at paraview.org Subject: [EXTERNAL] Re: [Paraview] volume color transfer table. Yes, that's a shortcoming of the current implementation. We'll plan to fix this by 4.4 or sooner. Utkarsh On Fri, Nov 7, 2014 at 11:58 AM, Burlen Loring wrote: > that is indeed annoying, and would be very nice to be able to save the > opacity table. A work around is use a state file. The opacity tables > will be saved/restored. note: 4.2 has a bug in state file loading re: time. > depending on your scenario you may need to use 4.1. > > > On 11/07/2014 08:33 AM, Anderson, Lawrence S. wrote: >> >> thanks for the attention! I should also point out that i have tried >> the import/export options on the color table editing feature- opacity >> is not preserved. i.e. when i export a table to an xml file, the >> opacities all revert to 1.0, and when i import an xml file, any ' >> o="x.xx" ' value is ignored, and whatever opacity function in the >> editor from previous work is applied instead. >> cheers- >> -lawrence a. >> >> ________________________________________ >> From: Utkarsh Ayachit [utkarsh.ayachit at kitware.com] >> Sent: Friday, November 07, 2014 9:01 AM >> To: Anderson, Lawrence S.; Aashish Chaudhary >> Cc: paraview at paraview.org >> Subject: Re: [Paraview] volume color transfer table. >> >> To the best of my knowledge, the current volume mappers in >> VTK/ParaView need to use a color/opacity transfer functions. Aashish, >> is that changing with the new volume rendering code? >> >> Utkarsh >> >> On Wed, Nov 5, 2014 at 3:12 PM, Anderson, Lawrence S. >> wrote: >>> >>> hi- i have seen this question on various blogs, but not the answer >>> in a usable form for me... >>> i provide project data to paraview via vtk legacy files in ascii. >>> the default color mapping functions provided by paraview do not >>> decouple opacity from color, so i am providing my own look_up table >>> of RGBa values organized in such a way that i can apply different >>> opacities to the same color, and different colors to the same >>> opacity. it works for surface rendering, but not for volume >>> rendering- i.e. when choosing the volume option, the rendering >>> reverts back to one of the default tables. how do i apply my scalar >>> color table in the vtk file to volumes? >>> i could laboriously enter 120x4 values into the paraview mapping >>> editor, but that seems silly... >>> thank you! >>> and as i am new to paraview and this list mail option, feel free to >>> refer me to an old post. >>> -lawrence anderson, university of toledo >>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview > > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview From utkarsh.ayachit at kitware.com Sat Nov 8 16:00:30 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Sat, 8 Nov 2014 16:00:30 -0500 Subject: [Paraview] ParaView 4.2 now available via Homebrew/science!! Message-ID: Folks, ParaView is now available on the Homebrew/science tap [1]. Brew away! Utkarsh [1] https://github.com/Homebrew/homebrew-science From S.R.Kharche at exeter.ac.uk Sun Nov 9 05:14:27 2014 From: S.R.Kharche at exeter.ac.uk (Kharche, Sanjay) Date: Sun, 9 Nov 2014 10:14:27 +0000 Subject: [Paraview] calculating circulation Message-ID: Dear All I use ParaView GUI to read in a 3D scalar field on a structured grid. I would like to calculate its gradient, and then the curl of this gradient in each voxel using ParaView. Can you provide examples or indicate the sequence of filters that should be used? thanks Sanjay From alobolistas at gmail.com Sun Nov 9 17:07:45 2014 From: alobolistas at gmail.com (Agustin Lobo) Date: Sun, 9 Nov 2014 23:07:45 +0100 Subject: [Paraview] Paraview for time series of images Message-ID: Hi! I'm looking into Paraview for the analysis of time series of satellite images. I've followed the tutorial and now wonder how to open a set of sequential tif (actually geotif) images. I've been googling and searching the list archives but what I find is very old and not easy to follow. Could anybody provide me instructions (or point me to the appropriate documentation) on how to open a set of images as a time sequence? Also, is there anybody out there using Paraview in Remote Sensing applications? Thanks Agus From stephen.wornom at inria.fr Mon Nov 10 04:36:25 2014 From: stephen.wornom at inria.fr (Stephen Wornom) Date: Mon, 10 Nov 2014 10:36:25 +0100 Subject: [Paraview] Paraview for time series of images In-Reply-To: References: Message-ID: <54608719.3070700@inria.fr> On 11/09/2014 11:07 PM, Agustin Lobo wrote: > Hi! > > I'm looking into Paraview for the analysis of time series of satellite > images. I've followed the tutorial and now wonder how to > open a set of sequential tif (actually geotif) images. Would (in linux) convert *.tif image.gif animate image be of help? Stephen > > I've been googling and searching the list archives but what I find is > very old and not easy to follow. > Could anybody provide me instructions (or point me to the appropriate > documentation) on how to open a set of images as > a time sequence? > > Also, is there anybody out there using Paraview in Remote Sensing applications? > > Thanks > > Agus > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From alobolistas at gmail.com Mon Nov 10 05:22:50 2014 From: alobolistas at gmail.com (Agustin Lobo) Date: Mon, 10 Nov 2014 11:22:50 +0100 Subject: [Paraview] Paraview for time series of images In-Reply-To: <54608719.3070700@inria.fr> References: <54608719.3070700@inria.fr> Message-ID: Do you mean outside Paraview, using convert and animate from the ImageMagick package? I'm looking for a way of doing this within Paraview. I've realized that I can select multiple tif files at Open. Then I can click the Play button and see the time increasing, but the actual display does not change, I see the image on top of all the stack only. Also, is there perhaps a way of converting the stack of tif images into a format that could be more efficient for Paraview? Thanks Agus On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom wrote: > On 11/09/2014 11:07 PM, Agustin Lobo wrote: >> >> Hi! >> >> I'm looking into Paraview for the analysis of time series of satellite >> images. I've followed the tutorial and now wonder how to >> open a set of sequential tif (actually geotif) images. > > > Would (in linux) > convert *.tif image.gif > animate image > be of help? > Stephen >> >> >> I've been googling and searching the list archives but what I find is >> very old and not easy to follow. >> Could anybody provide me instructions (or point me to the appropriate >> documentation) on how to open a set of images as >> a time sequence? >> >> Also, is there anybody out there using Paraview in Remote Sensing >> applications? >> >> Thanks >> >> Agus >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From morten at lysgaard.no Mon Nov 10 05:22:38 2014 From: morten at lysgaard.no (Morten Olsen Lysgaard) Date: Mon, 10 Nov 2014 11:22:38 +0100 Subject: [Paraview] Save selection as part of VTU file Message-ID: Hi. I am doing a custom made FEM solver in one of my studies. I have a 3D geometry that I save as a VTU file and do my computation on. To impose boundary conditions I would like to be able to select the edge faces of cells on the boundary of a geometry in ParaView. Then I would like to save the selection as a sort of "list of edges" inside the VTU file i export. I know how to select points, and cells, but how would i easiest select cell faces? When I have selected the cell faces, how do i export them so that my FEM program can read it? -------------- next part -------------- An HTML attachment was scrubbed... URL: From samuelkey at bresnan.net Mon Nov 10 09:52:29 2014 From: samuelkey at bresnan.net (Samuel Key) Date: Mon, 10 Nov 2014 07:52:29 -0700 Subject: [Paraview] Paraview for time series of images In-Reply-To: References: <54608719.3070700@inria.fr> Message-ID: <5460D12D.7050902@bresnan.net> Augustin, Have you looked here? http://www.itk.org/Wiki/ParaView/Users_Guide/Loading_Data As a once upon a time user of the *.vtu format, this approach worked for me. (I now use EnSight-formatted simulation results file-sets. This format works extremely well for my purposes.) Samuel On 11/10/2014 3:22 AM, Agustin Lobo wrote: > Do you mean outside Paraview, using convert and animate from the > ImageMagick package? > I'm looking for a way of doing this within Paraview. > > I've realized that I can select multiple tif files at Open. Then I can > click the Play button and see the time increasing, > but the actual display does not change, I see the image on top of all > the stack only. > > Also, is there perhaps a way of converting the stack of tif images > into a format that could be more efficient > for Paraview? > > Thanks > > Agus > > On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom > wrote: >> On 11/09/2014 11:07 PM, Agustin Lobo wrote: >>> Hi! >>> >>> I'm looking into Paraview for the analysis of time series of satellite >>> images. I've followed the tutorial and now wonder how to >>> open a set of sequential tif (actually geotif) images. >> >> Would (in linux) >> convert *.tif image.gif >> animate image >> be of help? >> Stephen >>> >>> I've been googling and searching the list archives but what I find is >>> very old and not easy to follow. >>> Could anybody provide me instructions (or point me to the appropriate >>> documentation) on how to open a set of images as >>> a time sequence? >>> >>> Also, is there anybody out there using Paraview in Remote Sensing >>> applications? >>> >>> Thanks >>> >>> Agus >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From alobolistas at gmail.com Mon Nov 10 11:12:00 2014 From: alobolistas at gmail.com (Agustin Lobo) Date: Mon, 10 Nov 2014 17:12:00 +0100 Subject: [Paraview] Paraview for time series of images In-Reply-To: <5460D12D.7050902@bresnan.net> References: <54608719.3070700@inria.fr> <5460D12D.7050902@bresnan.net> Message-ID: Tried that. I can see the group in the Open dialog, I select the group and get it in the Pipeline Browser. But when I click on Apply, I get an error: ERROR: In /home/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release/paraview/src/paraview/VTK/IO/Image/vtkTIFFReader.cxx, line 1116 vtkTIFFReader (0x594d4c0): Problem reading slice of volume in TIFF file. This does not happen when I read the same files individually, which I can display correctly. If I select Play, I get the same message several times and the display is like noise. Is there any way I can save the set of tif files as vtu ? Thanks Agus On Mon, Nov 10, 2014 at 3:52 PM, Samuel Key wrote: > Augustin, > > Have you looked here? > > http://www.itk.org/Wiki/ParaView/Users_Guide/Loading_Data > > As a once upon a time user of the *.vtu format, this approach worked for me. > > (I now use EnSight-formatted simulation results file-sets. This format works > extremely well for my purposes.) > > Samuel > > > > On 11/10/2014 3:22 AM, Agustin Lobo wrote: >> >> Do you mean outside Paraview, using convert and animate from the >> ImageMagick package? >> I'm looking for a way of doing this within Paraview. >> >> I've realized that I can select multiple tif files at Open. Then I can >> click the Play button and see the time increasing, >> but the actual display does not change, I see the image on top of all >> the stack only. >> >> Also, is there perhaps a way of converting the stack of tif images >> into a format that could be more efficient >> for Paraview? >> >> Thanks >> >> Agus >> >> On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom >> wrote: >>> >>> On 11/09/2014 11:07 PM, Agustin Lobo wrote: >>>> >>>> Hi! >>>> >>>> I'm looking into Paraview for the analysis of time series of satellite >>>> images. I've followed the tutorial and now wonder how to >>>> open a set of sequential tif (actually geotif) images. >>> >>> >>> Would (in linux) >>> convert *.tif image.gif >>> animate image >>> be of help? >>> Stephen >>>> >>>> >>>> I've been googling and searching the list archives but what I find is >>>> very old and not easy to follow. >>>> Could anybody provide me instructions (or point me to the appropriate >>>> documentation) on how to open a set of images as >>>> a time sequence? >>>> >>>> Also, is there anybody out there using Paraview in Remote Sensing >>>> applications? >>>> >>>> Thanks >>>> >>>> Agus >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From kmorel at sandia.gov Mon Nov 10 11:17:51 2014 From: kmorel at sandia.gov (Moreland, Kenneth) Date: Mon, 10 Nov 2014 16:17:51 +0000 Subject: [Paraview] Paraview for time series of images Message-ID: Have you tried just loading a sequence of numbered images? If you name your files something like image_0.tif, image_1.tif, image_2.tif, etc., ParaView will group those files in the browser, and if you open that group, ParaView will treat it as a time sequence. (The name can be anything as long as there is a number before the extension, so you can change "image_" to anything you want, add digits to the numbers such as 000, 001, 002, etc., and start at a different number like 1.) -Ken On 11/10/14, 9:12 AM, "Agustin Lobo" wrote: >Tried that. I can see the group in the Open dialog, I select the group >and get it in the Pipeline Browser. But when I click on Apply, I get >an error: > >ERROR: In >/home/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release/ >paraview/src/paraview/VTK/IO/Image/vtkTIFFReader.cxx, >line 1116 > >vtkTIFFReader (0x594d4c0): Problem reading slice of volume in TIFF file. > >This does not happen when I read the same files individually, which I >can display correctly. > >If I select Play, I get the same message several times and the display >is like noise. > >Is there any way I can save the set of tif files as vtu ? > >Thanks > >Agus > > >On Mon, Nov 10, 2014 at 3:52 PM, Samuel Key wrote: >> Augustin, >> >> Have you looked here? >> >> http://www.itk.org/Wiki/ParaView/Users_Guide/Loading_Data >> >> As a once upon a time user of the *.vtu format, this approach worked >>for me. >> >> (I now use EnSight-formatted simulation results file-sets. This format >>works >> extremely well for my purposes.) >> >> Samuel >> >> >> >> On 11/10/2014 3:22 AM, Agustin Lobo wrote: >>> >>> Do you mean outside Paraview, using convert and animate from the >>> ImageMagick package? >>> I'm looking for a way of doing this within Paraview. >>> >>> I've realized that I can select multiple tif files at Open. Then I can >>> click the Play button and see the time increasing, >>> but the actual display does not change, I see the image on top of all >>> the stack only. >>> >>> Also, is there perhaps a way of converting the stack of tif images >>> into a format that could be more efficient >>> for Paraview? >>> >>> Thanks >>> >>> Agus >>> >>> On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom >>> wrote: >>>> >>>> On 11/09/2014 11:07 PM, Agustin Lobo wrote: >>>>> >>>>> Hi! >>>>> >>>>> I'm looking into Paraview for the analysis of time series of >>>>>satellite >>>>> images. I've followed the tutorial and now wonder how to >>>>> open a set of sequential tif (actually geotif) images. >>>> >>>> >>>> Would (in linux) >>>> convert *.tif image.gif >>>> animate image >>>> be of help? >>>> Stephen >>>>> >>>>> >>>>> I've been googling and searching the list archives but what I find is >>>>> very old and not easy to follow. >>>>> Could anybody provide me instructions (or point me to the appropriate >>>>> documentation) on how to open a set of images as >>>>> a time sequence? >>>>> >>>>> Also, is there anybody out there using Paraview in Remote Sensing >>>>> applications? >>>>> >>>>> Thanks >>>>> >>>>> Agus >>>>> _______________________________________________ >>>>> Powered by www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >_______________________________________________ >Powered by www.kitware.com > >Visit other Kitware open-source projects at >http://www.kitware.com/opensource/opensource.html > >Please keep messages on-topic and check the ParaView Wiki at: >http://paraview.org/Wiki/ParaView > >Follow this link to subscribe/unsubscribe: >http://public.kitware.com/mailman/listinfo/paraview From kmorel at sandia.gov Mon Nov 10 12:08:32 2014 From: kmorel at sandia.gov (Moreland, Kenneth) Date: Mon, 10 Nov 2014 17:08:32 +0000 Subject: [Paraview] Paraview for time series of images Message-ID: This is just a guess, but the first thing I would check for is to make sure that the image metadata such as the resolution of the images is consistent across all the files. If the dimensions of the image changes that could wreck havoc on VTK's extent mechanism. -Ken On 11/10/14, 9:56 AM, "Agustin Lobo" wrote: >The procedure suggested by Samuel and Kenneth works: it seems I have >some problem >with the particular set of tif files I was using for testing, but I?ve >found that it works in other cases. >I'll try to find out what makes these tif images different. >Thanks > >Agus > > >On Mon, Nov 10, 2014 at 5:17 PM, Moreland, Kenneth >wrote: >> Have you tried just loading a sequence of numbered images? If you name >> your files something like image_0.tif, image_1.tif, image_2.tif, etc., >> ParaView will group those files in the browser, and if you open that >> group, ParaView will treat it as a time sequence. (The name can be >> anything as long as there is a number before the extension, so you can >> change "image_" to anything you want, add digits to the numbers such as >> 000, 001, 002, etc., and start at a different number like 1.) >> >> -Ken >> >> >> >> On 11/10/14, 9:12 AM, "Agustin Lobo" wrote: >> >>>Tried that. I can see the group in the Open dialog, I select the group >>>and get it in the Pipeline Browser. But when I click on Apply, I get >>>an error: >>> >>>ERROR: In >>>/home/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Releas >>>e/ >>>paraview/src/paraview/VTK/IO/Image/vtkTIFFReader.cxx, >>>line 1116 >>> >>>vtkTIFFReader (0x594d4c0): Problem reading slice of volume in TIFF file. >>> >>>This does not happen when I read the same files individually, which I >>>can display correctly. >>> >>>If I select Play, I get the same message several times and the display >>>is like noise. >>> >>>Is there any way I can save the set of tif files as vtu ? >>> >>>Thanks >>> >>>Agus >>> >>> >>>On Mon, Nov 10, 2014 at 3:52 PM, Samuel Key >>>wrote: >>>> Augustin, >>>> >>>> Have you looked here? >>>> >>>> http://www.itk.org/Wiki/ParaView/Users_Guide/Loading_Data >>>> >>>> As a once upon a time user of the *.vtu format, this approach worked >>>>for me. >>>> >>>> (I now use EnSight-formatted simulation results file-sets. This format >>>>works >>>> extremely well for my purposes.) >>>> >>>> Samuel >>>> >>>> >>>> >>>> On 11/10/2014 3:22 AM, Agustin Lobo wrote: >>>>> >>>>> Do you mean outside Paraview, using convert and animate from the >>>>> ImageMagick package? >>>>> I'm looking for a way of doing this within Paraview. >>>>> >>>>> I've realized that I can select multiple tif files at Open. Then I >>>>>can >>>>> click the Play button and see the time increasing, >>>>> but the actual display does not change, I see the image on top of all >>>>> the stack only. >>>>> >>>>> Also, is there perhaps a way of converting the stack of tif images >>>>> into a format that could be more efficient >>>>> for Paraview? >>>>> >>>>> Thanks >>>>> >>>>> Agus >>>>> >>>>> On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom >>>>> wrote: >>>>>> >>>>>> On 11/09/2014 11:07 PM, Agustin Lobo wrote: >>>>>>> >>>>>>> Hi! >>>>>>> >>>>>>> I'm looking into Paraview for the analysis of time series of >>>>>>>satellite >>>>>>> images. I've followed the tutorial and now wonder how to >>>>>>> open a set of sequential tif (actually geotif) images. >>>>>> >>>>>> >>>>>> Would (in linux) >>>>>> convert *.tif image.gif >>>>>> animate image >>>>>> be of help? >>>>>> Stephen >>>>>>> >>>>>>> >>>>>>> I've been googling and searching the list archives but what I find >>>>>>>is >>>>>>> very old and not easy to follow. >>>>>>> Could anybody provide me instructions (or point me to the >>>>>>>appropriate >>>>>>> documentation) on how to open a set of images as >>>>>>> a time sequence? >>>>>>> >>>>>>> Also, is there anybody out there using Paraview in Remote Sensing >>>>>>> applications? >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> Agus >>>>>>> _______________________________________________ >>>>>>> Powered by www.kitware.com >>>>>>> >>>>>>> Visit other Kitware open-source projects at >>>>>>> http://www.kitware.com/opensource/opensource.html >>>>>>> >>>>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>>>> http://paraview.org/Wiki/ParaView >>>>>>> >>>>>>> Follow this link to subscribe/unsubscribe: >>>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Powered by www.kitware.com >>>>>> >>>>>> Visit other Kitware open-source projects at >>>>>> http://www.kitware.com/opensource/opensource.html >>>>>> >>>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>>> http://paraview.org/Wiki/ParaView >>>>>> >>>>>> Follow this link to subscribe/unsubscribe: >>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>> >>>>> _______________________________________________ >>>>> Powered by www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>> >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>_______________________________________________ >>>Powered by www.kitware.com >>> >>>Visit other Kitware open-source projects at >>>http://www.kitware.com/opensource/opensource.html >>> >>>Please keep messages on-topic and check the ParaView Wiki at: >>>http://paraview.org/Wiki/ParaView >>> >>>Follow this link to subscribe/unsubscribe: >>>http://public.kitware.com/mailman/listinfo/paraview >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >>http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >>http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview From alobolistas at gmail.com Mon Nov 10 11:56:34 2014 From: alobolistas at gmail.com (Agustin Lobo) Date: Mon, 10 Nov 2014 17:56:34 +0100 Subject: [Paraview] Paraview for time series of images In-Reply-To: References: Message-ID: The procedure suggested by Samuel and Kenneth works: it seems I have some problem with the particular set of tif files I was using for testing, but I?ve found that it works in other cases. I'll try to find out what makes these tif images different. Thanks Agus On Mon, Nov 10, 2014 at 5:17 PM, Moreland, Kenneth wrote: > Have you tried just loading a sequence of numbered images? If you name > your files something like image_0.tif, image_1.tif, image_2.tif, etc., > ParaView will group those files in the browser, and if you open that > group, ParaView will treat it as a time sequence. (The name can be > anything as long as there is a number before the extension, so you can > change "image_" to anything you want, add digits to the numbers such as > 000, 001, 002, etc., and start at a different number like 1.) > > -Ken > > > > On 11/10/14, 9:12 AM, "Agustin Lobo" wrote: > >>Tried that. I can see the group in the Open dialog, I select the group >>and get it in the Pipeline Browser. But when I click on Apply, I get >>an error: >> >>ERROR: In >>/home/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release/ >>paraview/src/paraview/VTK/IO/Image/vtkTIFFReader.cxx, >>line 1116 >> >>vtkTIFFReader (0x594d4c0): Problem reading slice of volume in TIFF file. >> >>This does not happen when I read the same files individually, which I >>can display correctly. >> >>If I select Play, I get the same message several times and the display >>is like noise. >> >>Is there any way I can save the set of tif files as vtu ? >> >>Thanks >> >>Agus >> >> >>On Mon, Nov 10, 2014 at 3:52 PM, Samuel Key wrote: >>> Augustin, >>> >>> Have you looked here? >>> >>> http://www.itk.org/Wiki/ParaView/Users_Guide/Loading_Data >>> >>> As a once upon a time user of the *.vtu format, this approach worked >>>for me. >>> >>> (I now use EnSight-formatted simulation results file-sets. This format >>>works >>> extremely well for my purposes.) >>> >>> Samuel >>> >>> >>> >>> On 11/10/2014 3:22 AM, Agustin Lobo wrote: >>>> >>>> Do you mean outside Paraview, using convert and animate from the >>>> ImageMagick package? >>>> I'm looking for a way of doing this within Paraview. >>>> >>>> I've realized that I can select multiple tif files at Open. Then I can >>>> click the Play button and see the time increasing, >>>> but the actual display does not change, I see the image on top of all >>>> the stack only. >>>> >>>> Also, is there perhaps a way of converting the stack of tif images >>>> into a format that could be more efficient >>>> for Paraview? >>>> >>>> Thanks >>>> >>>> Agus >>>> >>>> On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom >>>> wrote: >>>>> >>>>> On 11/09/2014 11:07 PM, Agustin Lobo wrote: >>>>>> >>>>>> Hi! >>>>>> >>>>>> I'm looking into Paraview for the analysis of time series of >>>>>>satellite >>>>>> images. I've followed the tutorial and now wonder how to >>>>>> open a set of sequential tif (actually geotif) images. >>>>> >>>>> >>>>> Would (in linux) >>>>> convert *.tif image.gif >>>>> animate image >>>>> be of help? >>>>> Stephen >>>>>> >>>>>> >>>>>> I've been googling and searching the list archives but what I find is >>>>>> very old and not easy to follow. >>>>>> Could anybody provide me instructions (or point me to the appropriate >>>>>> documentation) on how to open a set of images as >>>>>> a time sequence? >>>>>> >>>>>> Also, is there anybody out there using Paraview in Remote Sensing >>>>>> applications? >>>>>> >>>>>> Thanks >>>>>> >>>>>> Agus >>>>>> _______________________________________________ >>>>>> Powered by www.kitware.com >>>>>> >>>>>> Visit other Kitware open-source projects at >>>>>> http://www.kitware.com/opensource/opensource.html >>>>>> >>>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>>> http://paraview.org/Wiki/ParaView >>>>>> >>>>>> Follow this link to subscribe/unsubscribe: >>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>> >>>>> >>>>> _______________________________________________ >>>>> Powered by www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>_______________________________________________ >>Powered by www.kitware.com >> >>Visit other Kitware open-source projects at >>http://www.kitware.com/opensource/opensource.html >> >>Please keep messages on-topic and check the ParaView Wiki at: >>http://paraview.org/Wiki/ParaView >> >>Follow this link to subscribe/unsubscribe: >>http://public.kitware.com/mailman/listinfo/paraview > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From dave.demarle at kitware.com Mon Nov 10 16:22:32 2014 From: dave.demarle at kitware.com (David E DeMarle) Date: Mon, 10 Nov 2014 16:22:32 -0500 Subject: [Paraview] See what our closest collaborators have been cooking up for IEEE SC 2014 Message-ID: Greetings again lists, If you are planning out what to see and do at this year's Supercomputing conference, please don't forget about the presentations we've got lined up at the Kitware booth. http://www.kitware.com/blog/home/post/773 thanks! David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 -------------- next part -------------- An HTML attachment was scrubbed... URL: From alobolistas at gmail.com Tue Nov 11 03:34:30 2014 From: alobolistas at gmail.com (Agustin Lobo) Date: Tue, 11 Nov 2014 09:34:30 +0100 Subject: [Paraview] Paraview for time series of images In-Reply-To: References: Message-ID: No, it is something related to the individual files, not with the fact of opening them as a sequence. Those images giving error at opening them as sequence also cause the same error if individually opened. (I actually provided a wrong information in one of my previous messages: because of the naming convention requirement, I was using a set of images for the sequence and another one for the individual loading, and they happen to have some difference). I'll open another thread as this problem is not related to opening the sequence and my problem at openeing the sequence has been solved. Thank you all for your help. Agus On Mon, Nov 10, 2014 at 6:08 PM, Moreland, Kenneth wrote: > This is just a guess, but the first thing I would check for is to make > sure that the image metadata such as the resolution of the images is > consistent across all the files. If the dimensions of the image changes > that could wreck havoc on VTK's extent mechanism. > > > -Ken > > On 11/10/14, 9:56 AM, "Agustin Lobo" wrote: > >>The procedure suggested by Samuel and Kenneth works: it seems I have >>some problem >>with the particular set of tif files I was using for testing, but I?ve >>found that it works in other cases. >>I'll try to find out what makes these tif images different. >>Thanks >> >>Agus >> >> >>On Mon, Nov 10, 2014 at 5:17 PM, Moreland, Kenneth >>wrote: >>> Have you tried just loading a sequence of numbered images? If you name >>> your files something like image_0.tif, image_1.tif, image_2.tif, etc., >>> ParaView will group those files in the browser, and if you open that >>> group, ParaView will treat it as a time sequence. (The name can be >>> anything as long as there is a number before the extension, so you can >>> change "image_" to anything you want, add digits to the numbers such as >>> 000, 001, 002, etc., and start at a different number like 1.) >>> >>> -Ken >>> >>> >>> >>> On 11/10/14, 9:12 AM, "Agustin Lobo" wrote: >>> >>>>Tried that. I can see the group in the Open dialog, I select the group >>>>and get it in the Pipeline Browser. But when I click on Apply, I get >>>>an error: >>>> >>>>ERROR: In >>>>/home/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Releas >>>>e/ >>>>paraview/src/paraview/VTK/IO/Image/vtkTIFFReader.cxx, >>>>line 1116 >>>> >>>>vtkTIFFReader (0x594d4c0): Problem reading slice of volume in TIFF file. >>>> >>>>This does not happen when I read the same files individually, which I >>>>can display correctly. >>>> >>>>If I select Play, I get the same message several times and the display >>>>is like noise. >>>> >>>>Is there any way I can save the set of tif files as vtu ? >>>> >>>>Thanks >>>> >>>>Agus >>>> >>>> >>>>On Mon, Nov 10, 2014 at 3:52 PM, Samuel Key >>>>wrote: >>>>> Augustin, >>>>> >>>>> Have you looked here? >>>>> >>>>> http://www.itk.org/Wiki/ParaView/Users_Guide/Loading_Data >>>>> >>>>> As a once upon a time user of the *.vtu format, this approach worked >>>>>for me. >>>>> >>>>> (I now use EnSight-formatted simulation results file-sets. This format >>>>>works >>>>> extremely well for my purposes.) >>>>> >>>>> Samuel >>>>> >>>>> >>>>> >>>>> On 11/10/2014 3:22 AM, Agustin Lobo wrote: >>>>>> >>>>>> Do you mean outside Paraview, using convert and animate from the >>>>>> ImageMagick package? >>>>>> I'm looking for a way of doing this within Paraview. >>>>>> >>>>>> I've realized that I can select multiple tif files at Open. Then I >>>>>>can >>>>>> click the Play button and see the time increasing, >>>>>> but the actual display does not change, I see the image on top of all >>>>>> the stack only. >>>>>> >>>>>> Also, is there perhaps a way of converting the stack of tif images >>>>>> into a format that could be more efficient >>>>>> for Paraview? >>>>>> >>>>>> Thanks >>>>>> >>>>>> Agus >>>>>> >>>>>> On Mon, Nov 10, 2014 at 10:36 AM, Stephen Wornom >>>>>> wrote: >>>>>>> >>>>>>> On 11/09/2014 11:07 PM, Agustin Lobo wrote: >>>>>>>> >>>>>>>> Hi! >>>>>>>> >>>>>>>> I'm looking into Paraview for the analysis of time series of >>>>>>>>satellite >>>>>>>> images. I've followed the tutorial and now wonder how to >>>>>>>> open a set of sequential tif (actually geotif) images. >>>>>>> >>>>>>> >>>>>>> Would (in linux) >>>>>>> convert *.tif image.gif >>>>>>> animate image >>>>>>> be of help? >>>>>>> Stephen >>>>>>>> >>>>>>>> >>>>>>>> I've been googling and searching the list archives but what I find >>>>>>>>is >>>>>>>> very old and not easy to follow. >>>>>>>> Could anybody provide me instructions (or point me to the >>>>>>>>appropriate >>>>>>>> documentation) on how to open a set of images as >>>>>>>> a time sequence? >>>>>>>> >>>>>>>> Also, is there anybody out there using Paraview in Remote Sensing >>>>>>>> applications? >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> Agus >>>>>>>> _______________________________________________ >>>>>>>> Powered by www.kitware.com >>>>>>>> >>>>>>>> Visit other Kitware open-source projects at >>>>>>>> http://www.kitware.com/opensource/opensource.html >>>>>>>> >>>>>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>>>>> http://paraview.org/Wiki/ParaView >>>>>>>> >>>>>>>> Follow this link to subscribe/unsubscribe: >>>>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Powered by www.kitware.com >>>>>>> >>>>>>> Visit other Kitware open-source projects at >>>>>>> http://www.kitware.com/opensource/opensource.html >>>>>>> >>>>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>>>> http://paraview.org/Wiki/ParaView >>>>>>> >>>>>>> Follow this link to subscribe/unsubscribe: >>>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>>> >>>>>> _______________________________________________ >>>>>> Powered by www.kitware.com >>>>>> >>>>>> Visit other Kitware open-source projects at >>>>>> http://www.kitware.com/opensource/opensource.html >>>>>> >>>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>>> http://paraview.org/Wiki/ParaView >>>>>> >>>>>> Follow this link to subscribe/unsubscribe: >>>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Powered by www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>_______________________________________________ >>>>Powered by www.kitware.com >>>> >>>>Visit other Kitware open-source projects at >>>>http://www.kitware.com/opensource/opensource.html >>>> >>>>Please keep messages on-topic and check the ParaView Wiki at: >>>>http://paraview.org/Wiki/ParaView >>>> >>>>Follow this link to subscribe/unsubscribe: >>>>http://public.kitware.com/mailman/listinfo/paraview >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>>http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>>http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From jtxqhao at gmail.com Tue Nov 11 03:35:12 2014 From: jtxqhao at gmail.com (Yu Yu) Date: Tue, 11 Nov 2014 16:35:12 +0800 Subject: [Paraview] Multiple GPUs in one node Message-ID: Hi, I need to run ParaViewWeb in Windows OS, I have no issue to get it run from Windows with single GPU card (using pvpython). How can I run it should I add another GPU ? Information from here -> http://www.paraview.org/Wiki/Setting_up_a_ParaView_Server shows that to make use of 2 GPUs, I need to use pvserver. Can I know what is the command to up pvserver from one node and make use of 2 GPUs cards (mpiexec in windows) ? Is the -display option work for windows ? Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed... URL: From tcfag1 at student.monash.edu Tue Nov 11 05:29:17 2014 From: tcfag1 at student.monash.edu (Timothy Charles Fagan) Date: Tue, 11 Nov 2014 21:29:17 +1100 Subject: [Paraview] calculator - lock in current values over time Message-ID: Hi I am using a calculator filter to get the y co-ordinates for a series of particles. I am then using that data to color by y position. However this color is changing over time as the particles move. I would like to "lock in" the first value, ie the original y position of the particles. Is this possible? Is there a function in the calculator or maybe a filter I can add to make sure the calculator data table isn't updated at every time increment? cheers, Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtxqhao at gmail.com Tue Nov 11 06:35:39 2014 From: jtxqhao at gmail.com (Yu Yu) Date: Tue, 11 Nov 2014 19:35:39 +0800 Subject: [Paraview] Multiple GPUs in one node Message-ID: Hi, I need to run ParaViewWeb in Windows OS, I have no issue to get it run from Windows with single GPU card (using pvpython). How can I run it should I add another GPU ? Information from here -> http://www.paraview.org/Wiki/Setting_up_a_ParaView_Server shows that to make use of 2 GPUs, I need to use pvserver. Can I know what is the command to up pvserver from one node and make use of 2 GPUs cards (mpiexec in windows) ? Is the -display option work for windows ? Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed... URL: From livia.barazzetti at istb.unibe.ch Tue Nov 11 09:29:31 2014 From: livia.barazzetti at istb.unibe.ch (livia.barazzetti at istb.unibe.ch) Date: Tue, 11 Nov 2014 14:29:31 +0000 Subject: [Paraview] Load text file delimited by tab Message-ID: Hi, I would like to load a text file, like a csv, delimited by tab instead of comma. If I modify the property Field Delimiter Characters to \t in the gui nothing happens (I have only 1 column). From the Python shell I can see that the property is actually set to '\\t', and if I set it manually to '\t' the file is then imported as expected. Is there a more direct way to achieve the same from the Paraview interface? Thank you Livia Livia Barazzetti Ph.D. Student - Medical Image Analysis Institute for Surgical Technology and Biomechanics University of Bern Stauffacherstrasse 78 CH-3014 Bern Tel +41 31 631 59 48 http://www.istb.unibe.ch -------------- next part -------------- An HTML attachment was scrubbed... URL: From i.krukow at tu-braunschweig.de Tue Nov 11 08:39:28 2014 From: i.krukow at tu-braunschweig.de (Ian Krukow) Date: Tue, 11 Nov 2014 14:39:28 +0100 Subject: [Paraview] EnSightReader: Change input file Message-ID: <54621190.8080107@tu-braunschweig.de> Hi all, I want to apply the same pipeline to a series of Ensight data files in order to save extractions in a different format. For the first file, this works fine. For the second file, I thought I could change the input file by changing the CaseFileName attribute: reader.CaseFileName = nextfile But when I run reader.UpdatePipeline() I get a segmentation fault. This depends neither on the file, nor on the pipeline following. I tried a workaround by building up a new pipeline for each file. It works, and as I have only two files by now, it is ok to do that, but for more files, memory usage would explode. Therefore, my question is: Is it possible only to change the input file of the EnSightReader, while keeping the pipeline? Kind regards Ian From fedele.stabile at fis.unical.it Tue Nov 11 11:05:51 2014 From: fedele.stabile at fis.unical.it (Fedele Stabile) Date: Tue, 11 Nov 2014 17:05:51 +0100 Subject: [Paraview] Reading CSV data file format Message-ID: <1415721951.16824.13.camel@tango.fis.unical.it> Hello, I'm new with ParaView and would like to visualize large dataset. My data are in a large file in CSV format (x,y,z,val) If I would use the memory of two server it is better to split the single file in two but I suppose it's necessary to convert the CSV file into a XML format. Can you help me to solve the problem? I use paraview client/server, the server is a cluster where I use MPI to run the pvserver Thank you in advance, Fedele Stabile From utkarsh.ayachit at kitware.com Tue Nov 11 13:19:42 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Tue, 11 Nov 2014 13:19:42 -0500 Subject: [Paraview] Load text file delimited by tab In-Reply-To: References: Message-ID: Interesting! Alas, no, there isn't a direct way for setting this in the UI, currently. Utkarsh On Tue, Nov 11, 2014 at 9:29 AM, wrote: > Hi, > > I would like to load a text file, like a csv, delimited by tab instead of > comma. > > If I modify the property Field Delimiter Characters to \t in the gui nothing > happens (I have only 1 column). From the Python shell I can see that the > property is actually set to ?\\t?, and if I set it manually to ?\t? the file > is then imported as expected. > > Is there a more direct way to achieve the same from the Paraview interface? > > Thank you > > Livia > > > > Livia Barazzetti > Ph.D. Student - Medical Image Analysis > Institute for Surgical Technology and Biomechanics > University of Bern > Stauffacherstrasse 78 > CH-3014 Bern > Tel +41 31 631 59 48 > http://www.istb.unibe.ch > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From chrisneal at ufl.edu Tue Nov 11 17:45:11 2014 From: chrisneal at ufl.edu (Neal,Christopher R) Date: Tue, 11 Nov 2014 22:45:11 +0000 Subject: [Paraview] Scale Data over Entire Time Range Message-ID: <1415745911857.32892@ufl.edu> Hello, I am using python to control Paraview via a script. I see that Paraview can scale a data set by the entire data set in a time series. If I use the Python trace function in Paraview it does not show how it determines the max and min values of a variable over the entire data set. It just rescales by some numbers(which I assume it computed at some point). My question is: Is there a function that I can call to get the max and min value of a variable in a data set over all times? Or maybe just get the max and min of a variable in a data set, and I will loop over all times and find the largest and smallest values. Thank you, Christopher R. Neal Graduate Student Center for Compressible Multiphase Turbulence Mechanical and Aerospace Engineering Department University of Florida Cell: (863)-697-1958 E-mail: chrisneal at ufl.edu -------------- next part -------------- An HTML attachment was scrubbed... URL: From jtxqhao at gmail.com Tue Nov 11 21:10:24 2014 From: jtxqhao at gmail.com (Yu Yu) Date: Wed, 12 Nov 2014 10:10:24 +0800 Subject: [Paraview] Multiple GPUs in one node Message-ID: Hi, I need to run ParaViewWeb in Windows OS, I have no issue to get it run from Windows with single GPU card (using pvpython). How can I run it should I add another GPU ? Information from here -> http://www.paraview.org/Wiki/Setting_up_a_ParaView_Server shows that to make use of 2 GPUs, I need to use pvserver. Can I know what is the command to up pvserver from one node and make use of 2 GPUs cards (mpiexec in windows) ? Is the -display option work for windows ? Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed... URL: From gekgek at infovalley.net.my Tue Nov 11 22:02:40 2014 From: gekgek at infovalley.net.my (gekgek) Date: Wed, 12 Nov 2014 11:02:40 +0800 Subject: [Paraview] Two GPUs in one node Message-ID: <001201cffe25$1f7d63b0$5e782b10$@infovalley.net.my> Hi, I need to run ParaViewWeb in Windows OS, I have no issue to get it run from Windows with single GPU card (using pvpython). How can I run it when I have another GPU ? Information from here -> http://www.paraview.org/Wiki/Setting_up_a_ParaView_Server shows that to make use of 2 GPUs, I need to use pvserver. Can I know what is the command to up pvserver from one node and make use of 2 GPUs cards (mpiexec in windows) ? Is the -display option work for windows ? Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed... URL: From wascott at sandia.gov Wed Nov 12 21:54:29 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Thu, 13 Nov 2014 02:54:29 +0000 Subject: [Paraview] FW: sideset ids in paraview In-Reply-To: References: Message-ID: A question from a user. Anyone know how side sets are defined? Thanks! Alan Hi Alan, We are working with a large mesh that has side sets defined by string names and not integer values. Does Paraview assign an integer if value to the side set and if so, how does it assign the id and is there a way to extract that from paraview? Thanks! Tom -------------- next part -------------- An HTML attachment was scrubbed... URL: From david.thompson at kitware.com Wed Nov 12 22:57:29 2014 From: david.thompson at kitware.com (David Thompson) Date: Wed, 12 Nov 2014 22:57:29 -0500 Subject: [Paraview] FW: sideset ids in paraview In-Reply-To: References: Message-ID: Hi Alan, > We are working with a large mesh that has side sets defined by string names and > not integer values. Does Paraview assign an integer if value to the side set and if so, > how does it assign the id and is there a way to extract that from paraview? > Thanks! The Exodus reader generates a multiblock dataset with one toplevel block containing all the side sets. The index of a side set inside that toplevel block is an integer and can be obtained in a Python programmable filter. The advantage of this is that it's cheap, storage-wise. The disadvantage is that the index will vary depending on what side sets you choose to load. The Exodus reader can also provide a cell array identifying the side set ID (an integer stored in the Exodus file). See http://vtk.org/gitweb?p=VTK.git;a=blob;f=IO/Exodus/vtkExodusIIReader.h;h=10de0366f262732d333ba45187917228d428c21e;hb=HEAD#l112 for more information. I believe this is exposed in ParaView, but forget what the button is called... it used to be "Generate ObjectIds" but someone decided that was unclear and was going to change it to something that *I* think is unclear. :-) The advantage of the generated IDs is that they do not vary depending on what you choose to load. The disadvantage is that it is not stored on the block, but on each cell in the block, so it takes up a lot of memory. David -------------- next part -------------- An HTML attachment was scrubbed... URL: From f.veronesi at scsitaly.com Thu Nov 13 06:03:40 2014 From: f.veronesi at scsitaly.com (Federico Veronesi) Date: Thu, 13 Nov 2014 12:03:40 +0100 Subject: [Paraview] Fwd: Problem with all in one/separated panels In-Reply-To: References: Message-ID: Dear Paraview users, I found an unexpected behavior in Paraview 4.2. When I set separated panels or other options except the combined one, I don't get what it is expected and 6 grayed button (restore, update) appear. I think I fixed it by adding the following lines to pqPropertiesPanel.cxx in the setPanelMode method: // added to avoid unwanted update restore buttons this->Internals->Ui.PropertiesSaveAsDefaults->setVisible(has_source); this->Internals->Ui.PropertiesRestoreDefaults->setVisible(has_source); this->Internals->Ui.DisplaySaveAsDefaults->setVisible(has_display); this->Internals->Ui.DisplayRestoreDefaults->setVisible(has_display); this->Internals->Ui.ViewSaveAsDefaults->setVisible(has_view); this->Internals->Ui.ViewRestoreDefaults->setVisible(has_view); Moreover I modified the paraview main window to setup the panels. i.e. for ALL_SEPARATE: case vtkPVGeneralSettings::ALL_SEPARATE: this->Internals->propertiesPanel->setPanelMode( pqPropertiesPanel::SOURCE_PROPERTIES); // added this->Internals->viewPropertiesPanel->setPanelMode( pqPropertiesPanel::VIEW_PROPERTIES); this->Internals->displayPropertiesPanel->setPanelMode(pqPropertiesPanel::DISPLAY_PROPERTIES); It works at start up, but when I use more than one source the display panel doesn't show any property when switching from one source to another. Do you know what can cause this behavior and how to possibly solve it? Thank you Federico P.S. sorry if I sent this mail previously on paraview-developers, but may be it was the wrong list. -------------- next part -------------- An HTML attachment was scrubbed... URL: From sylvynyo at gmail.com Thu Nov 13 06:11:01 2014 From: sylvynyo at gmail.com (Mykhaylo Zayats) Date: Thu, 13 Nov 2014 11:11:01 +0000 Subject: [Paraview] Particle Tracer doesn't display any results Message-ID: Hi, I have 2 files with data which contains x and y components of velocity field, I try to combine this data into vector and then create particle tracer, but it doesn't work. Here is the pipeline of the visualisation: 1. data is in NetCDFReader1 and NetCDFReader2. 2. appending: NetCDFReader1, NetCDFReader2 => AppendAttributes1 3. build a vector: AppendAttributes1 => Calculator1 (with the formula x*iHat + y*jHat + 0*kHat) 4. create seeds source for particle tracer: Line1 5. create tracer: Calculator1, Line1 => ParticleTracer1 6. animating. but nothing is happening, ParticleTracer1 doesn't display any data, I tried to replace step 5. with ParticlePath or StreakLine and animate termination time, but it doesn't work as well. Note, if I use stream lines in step 5 they are working. Any advice what may be the reason? Or maybe you know any tutorial for particle tracing with real example (data, step-by-step instruction). Thank you, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: From florian.hoffmann at inutech.de Thu Nov 13 07:19:27 2014 From: florian.hoffmann at inutech.de (Florian Hoffmann) Date: Thu, 13 Nov 2014 13:19:27 +0100 Subject: [Paraview] MapDataArrayToVertexAttribute question In-Reply-To: References: Message-ID: <5464A1CF.6010408@inutech.de> Dear all, I am trying to reuse some code from the point sprites plugin. I would like to pass some size information onto some shader code for nine different points like this: voidvtkPointSpriteProperty::Render(vtkActor*act,vtkRenderer*ren) { vtkPainterPolyDataMapper*mapper= vtkPainterPolyDataMapper::SafeDownCast(act->GetMapper()); vtkSmartPointerdarr=vtkSmartPointer::New(); darr->SetNumberOfTuples(9); darr->SetName("testArray"); double size_tuple[1] = {0.2}; darr->SetNumberOfComponents(1); darr->SetTupleValue(0, size_tuple); darr->SetTupleValue(1, size_tuple); darr->SetTupleValue(2, size_tuple); darr->SetTupleValue(3, size_tuple); darr->SetTupleValue(4, size_tuple); darr->SetTupleValue(5, size_tuple); darr->SetTupleValue(6, size_tuple); darr->SetTupleValue(7, size_tuple); darr->SetTupleValue(8, size_tuple); mapper->RemoveVertexAttributeMapping("SizeParam1"); mapper->MapDataArrayToVertexAttribute("SizeParam1",darr->GetName(), vtkDataObject::FIELD_ASSOCIATION_POINTS, 0); glPushAttrib(GL_ALL_ATTRIB_BITS); glEnable(vtkgl::VERTEX_PROGRAM_POINT_SIZE_ARB); this->Superclass::Render(act,ren); } shader code : attribute float SizeParam1; attribute float SizeParam2; attribute float SizeParam3; vec3 GetSizeParams() { vec3 sizeparams=vec3(0.0,0.5,0.8); sizeparams.x = SizeParam1; // sizeparams.y = SizeParam2; // sizeparams.z = SizeParam3; return sizeparams; } Question: How is the 0.2 stored in the tuple modified while passed to the shader code ? Because the value arriving in the shader code seems to be different from the value 0.2 which is stored in the tuples. I noticed, because if I hardwire 0.2 in the shader code like this vec3 GetSizeParams() { vec3 sizeparams=vec3(0.2,0.5,0.8); return sizeparams; } I see a different rendering. Could anyone please cast a light into this issue and tell me what I am doing wrong or rather which settings influencing the mapping I should draw my attention to ? Thanks. Best regards, Florian -------------- next part -------------- An HTML attachment was scrubbed... URL: From andy.bauer at kitware.com Thu Nov 13 10:05:46 2014 From: andy.bauer at kitware.com (Andy Bauer) Date: Thu, 13 Nov 2014 10:05:46 -0500 Subject: [Paraview] Particle Tracer doesn't display any results In-Reply-To: References: Message-ID: You probably need to glyph the output from the particle path and the streakline filter to see the locations. Right now I don't think any cells are being generated by those two filters. If you don't have any points, you'll probably need to set termination time to something other than 0 for particle paths. I haven't tested the streakline filter but suspect it has similar behavior. Regards, Andy On Thu, Nov 13, 2014 at 6:11 AM, Mykhaylo Zayats wrote: > Hi, > > I have 2 files with data which contains x and y components of velocity > field, I try to combine this data into vector and then create particle > tracer, but it doesn't work. Here is the pipeline of the visualisation: > 1. data is in NetCDFReader1 and NetCDFReader2. > 2. appending: NetCDFReader1, NetCDFReader2 => AppendAttributes1 > 3. build a vector: AppendAttributes1 => Calculator1 (with the formula > x*iHat + y*jHat + 0*kHat) > 4. create seeds source for particle tracer: Line1 > 5. create tracer: Calculator1, Line1 => ParticleTracer1 > 6. animating. > > but nothing is happening, ParticleTracer1 doesn't display any data, I > tried to replace step 5. with ParticlePath or StreakLine and animate > termination time, but it doesn't work as well. > Note, if I use stream lines in step 5 they are working. > > Any advice what may be the reason? Or maybe you know any tutorial for > particle tracing with real example (data, step-by-step instruction). > > Thank you, > Mike > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From utkarsh.ayachit at kitware.com Thu Nov 13 10:15:05 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Thu, 13 Nov 2014 10:15:05 -0500 Subject: [Paraview] Fwd: Problem with all in one/separated panels In-Reply-To: References: Message-ID: I can reproduce it. I am flummoxed too. Looking into it. On Thu, Nov 13, 2014 at 6:03 AM, Federico Veronesi wrote: > Dear Paraview users, > > I found an unexpected behavior in Paraview 4.2. > When I set separated panels or other options except the combined one, I > don't get what it is expected and 6 grayed button (restore, update) appear. > > I think I fixed it by adding the following lines to pqPropertiesPanel.cxx in > the setPanelMode method: > > // added to avoid unwanted update restore buttons > > this->Internals->Ui.PropertiesSaveAsDefaults->setVisible(has_source); > > this->Internals->Ui.PropertiesRestoreDefaults->setVisible(has_source); > > this->Internals->Ui.DisplaySaveAsDefaults->setVisible(has_display); > > this->Internals->Ui.DisplayRestoreDefaults->setVisible(has_display); > > this->Internals->Ui.ViewSaveAsDefaults->setVisible(has_view); > > this->Internals->Ui.ViewRestoreDefaults->setVisible(has_view); > > > Moreover I modified the paraview main window to setup the panels. i.e. for > ALL_SEPARATE: > > case vtkPVGeneralSettings::ALL_SEPARATE: > > this->Internals->propertiesPanel->setPanelMode( > pqPropertiesPanel::SOURCE_PROPERTIES); > > // added > > this->Internals->viewPropertiesPanel->setPanelMode( > pqPropertiesPanel::VIEW_PROPERTIES); > > > this->Internals->displayPropertiesPanel->setPanelMode(pqPropertiesPanel::DISPLAY_PROPERTIES); > > > > It works at start up, but when I use more than one source the display panel > doesn't show any property when switching from one source to another. > > Do you know what can cause this behavior and how to possibly solve it? > > > Thank you > > > Federico > > > P.S. sorry if I sent this mail previously on paraview-developers, but may be > it was the wrong list. > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Thu Nov 13 10:31:46 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Thu, 13 Nov 2014 10:31:46 -0500 Subject: [Paraview] Fwd: Problem with all in one/separated panels In-Reply-To: References: Message-ID: Found it...I'll send a patch soon. On Thu, Nov 13, 2014 at 10:15 AM, Utkarsh Ayachit wrote: > I can reproduce it. I am flummoxed too. Looking into it. > > On Thu, Nov 13, 2014 at 6:03 AM, Federico Veronesi > wrote: >> Dear Paraview users, >> >> I found an unexpected behavior in Paraview 4.2. >> When I set separated panels or other options except the combined one, I >> don't get what it is expected and 6 grayed button (restore, update) appear. >> >> I think I fixed it by adding the following lines to pqPropertiesPanel.cxx in >> the setPanelMode method: >> >> // added to avoid unwanted update restore buttons >> >> this->Internals->Ui.PropertiesSaveAsDefaults->setVisible(has_source); >> >> this->Internals->Ui.PropertiesRestoreDefaults->setVisible(has_source); >> >> this->Internals->Ui.DisplaySaveAsDefaults->setVisible(has_display); >> >> this->Internals->Ui.DisplayRestoreDefaults->setVisible(has_display); >> >> this->Internals->Ui.ViewSaveAsDefaults->setVisible(has_view); >> >> this->Internals->Ui.ViewRestoreDefaults->setVisible(has_view); >> >> >> Moreover I modified the paraview main window to setup the panels. i.e. for >> ALL_SEPARATE: >> >> case vtkPVGeneralSettings::ALL_SEPARATE: >> >> this->Internals->propertiesPanel->setPanelMode( >> pqPropertiesPanel::SOURCE_PROPERTIES); >> >> // added >> >> this->Internals->viewPropertiesPanel->setPanelMode( >> pqPropertiesPanel::VIEW_PROPERTIES); >> >> >> this->Internals->displayPropertiesPanel->setPanelMode(pqPropertiesPanel::DISPLAY_PROPERTIES); >> >> >> >> It works at start up, but when I use more than one source the display panel >> doesn't show any property when switching from one source to another. >> >> Do you know what can cause this behavior and how to possibly solve it? >> >> >> Thank you >> >> >> Federico >> >> >> P.S. sorry if I sent this mail previously on paraview-developers, but may be >> it was the wrong list. >> >> >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> From utkarsh.ayachit at kitware.com Thu Nov 13 11:01:40 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Thu, 13 Nov 2014 11:01:40 -0500 Subject: [Paraview] Fwd: Problem with all in one/separated panels In-Reply-To: References: Message-ID: Here's the bug: http://www.paraview.org/Bug/view.php?id=15126 Patch attached. Thanks for reporting this. Utkarsh On Thu, Nov 13, 2014 at 10:31 AM, Utkarsh Ayachit wrote: > Found it...I'll send a patch soon. > > On Thu, Nov 13, 2014 at 10:15 AM, Utkarsh Ayachit > wrote: >> I can reproduce it. I am flummoxed too. Looking into it. >> >> On Thu, Nov 13, 2014 at 6:03 AM, Federico Veronesi >> wrote: >>> Dear Paraview users, >>> >>> I found an unexpected behavior in Paraview 4.2. >>> When I set separated panels or other options except the combined one, I >>> don't get what it is expected and 6 grayed button (restore, update) appear. >>> >>> I think I fixed it by adding the following lines to pqPropertiesPanel.cxx in >>> the setPanelMode method: >>> >>> // added to avoid unwanted update restore buttons >>> >>> this->Internals->Ui.PropertiesSaveAsDefaults->setVisible(has_source); >>> >>> this->Internals->Ui.PropertiesRestoreDefaults->setVisible(has_source); >>> >>> this->Internals->Ui.DisplaySaveAsDefaults->setVisible(has_display); >>> >>> this->Internals->Ui.DisplayRestoreDefaults->setVisible(has_display); >>> >>> this->Internals->Ui.ViewSaveAsDefaults->setVisible(has_view); >>> >>> this->Internals->Ui.ViewRestoreDefaults->setVisible(has_view); >>> >>> >>> Moreover I modified the paraview main window to setup the panels. i.e. for >>> ALL_SEPARATE: >>> >>> case vtkPVGeneralSettings::ALL_SEPARATE: >>> >>> this->Internals->propertiesPanel->setPanelMode( >>> pqPropertiesPanel::SOURCE_PROPERTIES); >>> >>> // added >>> >>> this->Internals->viewPropertiesPanel->setPanelMode( >>> pqPropertiesPanel::VIEW_PROPERTIES); >>> >>> >>> this->Internals->displayPropertiesPanel->setPanelMode(pqPropertiesPanel::DISPLAY_PROPERTIES); >>> >>> >>> >>> It works at start up, but when I use more than one source the display panel >>> doesn't show any property when switching from one source to another. >>> >>> Do you know what can cause this behavior and how to possibly solve it? >>> >>> >>> Thank you >>> >>> >>> Federico >>> >>> >>> P.S. sorry if I sent this mail previously on paraview-developers, but may be >>> it was the wrong list. >>> >>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-BUG-15126-Fix-issues-with-separated-properties-displ.patch Type: text/x-patch Size: 2654 bytes Desc: not available URL: From fedele.stabile at fis.unical.it Fri Nov 14 04:09:26 2014 From: fedele.stabile at fis.unical.it (Fedele Stabile) Date: Fri, 14 Nov 2014 10:09:26 +0100 Subject: [Paraview] Reading CSV data file format In-Reply-To: <1415721951.16824.13.camel@tango.fis.unical.it> References: <1415721951.16824.13.camel@tango.fis.unical.it> Message-ID: <1415956166.16824.43.camel@tango.fis.unical.it> Hello, is there anyone interested to help me to distribute data among nodes? Reading around to try to solve the problem about my large dataset that I would like to distribute, I have understood that if I run mpirun -np 4 pvserver and I load large csv data file, Paraview redistributes data after reading it.. Is this correct? Is there a possibility to change the Process Id Scalar associated to a value? Thank you in advance, Fedele Stabile Il giorno mar, 11/11/2014 alle 17.05 +0100, Fedele Stabile ha scritto: > Hello, > I'm new with ParaView and would like to visualize large dataset. > My data are in a large file in CSV format (x,y,z,val) > If I would use the memory of two server it is better to split the single > file in two but I suppose it's necessary to convert the CSV file into a > XML format. > Can you help me to solve the problem? > > I use paraview client/server, the server is a cluster where I use MPI to > run the pvserver > > Thank you in advance, > Fedele Stabile From conega at lanl.gov Fri Nov 14 12:38:02 2014 From: conega at lanl.gov (Giovanni A. Cone) Date: Fri, 14 Nov 2014 10:38:02 -0700 Subject: [Paraview] The "configuration" attribute of the "server" tag in server.pvsc Message-ID: <54663DFA.10407@lanl.gov> Hola Paraviewers, I'm planning on creating an official "servers.pvsc" file for users of our LANL HPC platforms similar to what NERSC provides (see https://www.nersc.gov/users/software/data-visualization-and-analytics/paraview). I've noticed that if I add a server using the GUI "Connect to Server" interface that the resulting saved "servers.pvsc" file has the following form of a "server tag" entry: I'm curious as to what the "configuration" attribute in the Server XML tag is used for. Could it be used to refer to another XML "pvsc" file to deal with complication connection processes? Or is it just an unused attribute? Thanks for your time responding to this inquiry. -- ! Giovanni "Vann" Cone ! LANL HPC-3 Consultant ! TA-3, BLDG 2327, RM 1128 ! Schedule B !............................... ! I fight for the users! END OF LINE From utkarsh.ayachit at kitware.com Fri Nov 14 14:13:28 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 14 Nov 2014 14:13:28 -0500 Subject: [Paraview] The "configuration" attribute of the "server" tag in server.pvsc In-Reply-To: <54663DFA.10407@lanl.gov> References: <54663DFA.10407@lanl.gov> Message-ID: Giovanni, The configuration attribute does seem to be something left over from the past. It doesn't seem to be used for anything currently. Utkarsh On Fri, Nov 14, 2014 at 12:38 PM, Giovanni A. Cone wrote: > Hola Paraviewers, > > I'm planning on creating an official "servers.pvsc" file for users of our > LANL HPC platforms similar to what NERSC provides (see > https://www.nersc.gov/users/software/data-visualization-and-analytics/paraview). > I've noticed that if I add a server using the GUI "Connect to Server" > interface that the resulting saved "servers.pvsc" file has the following > form of a "server tag" entry: > > resource="csrc://localhost:11111"> > > > > I'm curious as to what the "configuration" attribute in the Server XML tag > is used for. Could it be used to refer to another XML "pvsc" file to deal > with complication connection processes? Or is it just an unused attribute? > > Thanks for your time responding to this inquiry. > -- > ! Giovanni "Vann" Cone > ! LANL HPC-3 Consultant > ! TA-3, BLDG 2327, RM 1128 > ! Schedule B > !............................... > ! I fight for the users! > END OF LINE > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From jan.brezina at tul.cz Fri Nov 14 17:01:22 2014 From: jan.brezina at tul.cz (Jan Brezina) Date: Fri, 14 Nov 2014 23:01:22 +0100 Subject: [Paraview] make labels from python plugin Message-ID: <54667BB2.9040500@tul.cz> Hi, I have implemented a reader plugin in Python using ProgrammableFilter and appropriate XML file (http://www.kitware.com/blog/home/post/534) Thank you, Pat. However the input contains some text labels attached to particular points in space. I'm look for way to show them in 3d view. After one day searching I realized: 1) It probably can not be done within ProgrammableFilter since there is no source that can produce a text anchored to a 3D point, but always oriented to the viewer. Am I right? 2) This can be done at client-side, e.g. from Python Shell, using vtk mappers and actors. However, I didn't find a way how to create a client-side plugin implemented in Python. Is it possible? How? If yes, how can I call it after the server-side of the reader and pass there its data? I would like to do it in Python because of portability. I appreciate any hints. Jan Brezina -- ------------------------ Mgr. Jan Brezina, Ph. D. Technical University in Liberec, New technologies institute http://www.nti.tul.cz/cz/WikiUser:Jan.Brezina From utkarsh.ayachit at kitware.com Fri Nov 14 22:29:28 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 14 Nov 2014 22:29:28 -0500 Subject: [Paraview] MapDataArrayToVertexAttribute question In-Reply-To: <5464A1CF.6010408@inutech.de> References: <5464A1CF.6010408@inutech.de> Message-ID: Florian, MapDataArrayToVertexAttribute expects the data array to be present in the input data going into the mapper itself. I see you're creating a new `darr`, but I don't see it being added to a dataset and then that being passed on to the mapper. Are you doing that? Having said that, you should look into adding a filter to add this data array to your dataset, vtkProperty/vtkPointSpriteProperty isn't a the best place to change input dataset being fed to the mapper. Utkarsh On Thu, Nov 13, 2014 at 7:19 AM, Florian Hoffmann wrote: > Dear all, > > I am trying to reuse some code from the point sprites plugin. > I would like to pass some size information onto some shader code for nine > different points like this: > > void vtkPointSpriteProperty::Render(vtkActor *act, vtkRenderer *ren) > > { > > > > vtkPainterPolyDataMapper* mapper = > > vtkPainterPolyDataMapper::SafeDownCast(act->GetMapper()); > > > vtkSmartPointer darr = > vtkSmartPointer::New(); > > darr->SetNumberOfTuples(9); > > darr->SetName("testArray"); > > double size_tuple[1] = {0.2}; > > darr->SetNumberOfComponents(1); > > > darr->SetTupleValue(0, size_tuple); > > darr->SetTupleValue(1, size_tuple); > > darr->SetTupleValue(2, size_tuple); > > darr->SetTupleValue(3, size_tuple); > > darr->SetTupleValue(4, size_tuple); > > darr->SetTupleValue(5, size_tuple); > > darr->SetTupleValue(6, size_tuple); > > darr->SetTupleValue(7, size_tuple); > > darr->SetTupleValue(8, size_tuple); > > > > mapper->RemoveVertexAttributeMapping("SizeParam1"); > mapper->MapDataArrayToVertexAttribute("SizeParam1", darr->GetName(), > > vtkDataObject::FIELD_ASSOCIATION_POINTS, 0); > > > > glPushAttrib(GL_ALL_ATTRIB_BITS); > > glEnable(vtkgl::VERTEX_PROGRAM_POINT_SIZE_ARB); > > this->Superclass::Render(act, ren); > } > > shader code : > > attribute float SizeParam1; > > attribute float SizeParam2; > > attribute float SizeParam3; > > > vec3 GetSizeParams() > > { > > vec3 sizeparams=vec3(0.0,0.5,0.8); > > sizeparams.x = SizeParam1; > > // sizeparams.y = SizeParam2; > // sizeparams.z = SizeParam3; > > > return sizeparams; > > } > > > > Question: How is the 0.2 stored in the tuple modified while passed to the > shader code ? > > Because the value arriving in the > shader code seems to be different from the value 0.2 which is stored in the > tuples. > I noticed, because if I hardwire 0.2 in the shader code like this > > > vec3 GetSizeParams() > > { > > vec3 sizeparams=vec3(0.2,0.5,0.8); > > return sizeparams; > } > > I see a different rendering. > > Could anyone please cast a light into this issue and tell me what I am doing > wrong or rather which settings influencing the mapping I should draw my > attention to ? > > Thanks. > > Best regards, > > Florian > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Fri Nov 14 22:35:32 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 14 Nov 2014 22:35:32 -0500 Subject: [Paraview] Scale Data over Entire Time Range In-Reply-To: <1415745911857.32892@ufl.edu> References: <1415745911857.32892@ufl.edu> Message-ID: Yes, you can use `RescaleTransferFunctionToDataRangeOverTime` method on the "display" object. > disp = GetDisplayProperties(reader) > disp.RescaleTransferFunctionToDataRangeOverTime() Assuming that the scalar coloring was already setup, the above call will rescale the lut range for the array being used for coloring. Utkarsh On Tue, Nov 11, 2014 at 5:45 PM, Neal,Christopher R wrote: > Hello, > > > I am using python to control Paraview via a script. I see that Paraview can > scale a data set by the entire data set in a time series. If I use the > Python trace function in Paraview it does not show how it determines the max > and min values of a variable over the entire data set. It just rescales by > some numbers(which I assume it computed at some point). > > > My question is: Is there a function that I can call to get the max and min > value of a variable in a data set over all times? Or maybe just get the max > and min of a variable in a data set, and I will loop over all times and find > the largest and smallest values. > > > Thank you, > > > Christopher R. Neal > Graduate Student > Center for Compressible Multiphase Turbulence > Mechanical and Aerospace Engineering Department > University of Florida > Cell: (863)-697-1958 > E-mail: chrisneal at ufl.edu > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Fri Nov 14 22:39:11 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Fri, 14 Nov 2014 22:39:11 -0500 Subject: [Paraview] EnSightReader: Change input file In-Reply-To: <54621190.8080107@tu-braunschweig.de> References: <54621190.8080107@tu-braunschweig.de> Message-ID: Ability to change filenames depends on specific reader implementations. I am not entire familiar with the internal implementation, but if you have a couple of sample datasets/script to reproduce the segfault, I can check if its a minor fix to the reader to enable this or if it just can't support it. Either case, you should be able to call Delete(reader) to delete old reader once you're done with it to avoid memory bloat. Utkarsh On Tue, Nov 11, 2014 at 8:39 AM, Ian Krukow wrote: > Hi all, > > I want to apply the same pipeline to a series of Ensight data files in order > to save extractions in a different format. For the first file, this works > fine. For the second file, I thought I could change the input file by > changing the CaseFileName attribute: > > reader.CaseFileName = nextfile > > But when I run > > reader.UpdatePipeline() > > I get a segmentation fault. This depends neither on the file, nor on the > pipeline following. > > I tried a workaround by building up a new pipeline for each file. It works, > and as I have only two files by now, it is ok to do that, but for more > files, memory usage would explode. Therefore, my question is: Is it possible > only to change the input file of the EnSightReader, while keeping the > pipeline? > > Kind regards > Ian > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From allan at lyckegaard.dk Mon Nov 17 06:19:40 2014 From: allan at lyckegaard.dk (Allan Lyckegaard) Date: Mon, 17 Nov 2014 12:19:40 +0100 Subject: [Paraview] Python Programmable Filter: Reading unsigned short TIFFs into vtkImageData Message-ID: Hi paraview list Based on this blog post: http://www.kitware.com/blog/home/post/534, I am trying to make a Python plugin (source) that reads a stack of unsigned short TIFFs (uint16) and outputs 3D unsigned short imagedata in Paraview. Assigning the geometry to the imagedata works fine (see def RequestInformation). My problem is that the values of the voxels in the imagedata is not assigned correct (see def RequestData). According to Paraview information tab the data type is unsigned short, but when reading in a known TIFF (8x8 with uint16 values 1..64) the values of the imagedata are not correct. I suspect the last line "array.SetValue(offset+v, vals.GetValue(v))" is the problem. Does the vals.GetValue(v) get casted into a Python type int before stored in the array? When I print vals.GetValue(v) to a textfile, I can see that I read the correct values from the TIFF. Can anybody see what the problem is? Cheers, Allan def RequestData(): import os from paraview import vtk from vtk import vtkTIFFReader # this reader does not exist in paraview?? filepath = Filepath # path to file filestr = Filename # string containing filename and %d first = First # first image, e.g. 0 or 1 last = Last # last image N = last-first+1 # number of images # Get a vtkImageData object for the output pdo = self.GetOutput() print 'read' # set up reader reader = vtkTIFFReader() filename = filestr % first reader.SetFileName(os.path.join(filepath, filename)) reader.Update() # get tiff info ext = reader.GetDataExtent() # set up output volume pdo.SetExtent(0, ext[1], 0, ext[3], 0, N-1) #pdo.SetDimensions(ext[1]+1,ext[3]+1,N) pdo.SetOrigin(0,0,0) pdo.SetSpacing(1,1,1) pdo.AllocateScalars(vtk.VTK_UNSIGNED_SHORT,1) # temporary array for voxel values array = vtk.vtkUnsignedShortArray() array.SetName('Voxels') array.SetNumberOfComponents(1) #array.SetNumberOfTuples(pdo.GetNumberOfPoints()) array.SetNumberOfValues(pdo.GetNumberOfPoints()) pdo.GetPointData().AddArray(array) # fill array with tiffs for i in range(N): filename = filestr % (first+i) print filename reader.SetFileName(os.path.join(filepath, filename)) reader.Update() image = reader.GetOutput() vals = image.GetPointData().GetArray('Tiff Scalars') offset = i*N for v in range((ext[0]+1)*(ext[1]+1)): print vals.GetValue(v) array.SetValue(offset+v, vals.GetValue(v)) def RequestInformation(): import os from paraview import vtk, util from vtk import vtkTIFFReader filepath = Filepath # path to file filestr = Filename # string containing filename and %d first = First # first image, e.g. 0 or 1 last = Last # last image # set up reader reader = vtkTIFFReader() filename = filestr % first reader.SetFileName(os.path.join(filepath, filename)) reader.Update() # get tiff info ext = reader.GetDataExtent() # update extent information util.SetOutputWholeExtent(self, [0, ext[1], 0, ext[3], 0, last-first]) -------------- next part -------------- An HTML attachment was scrubbed... URL: From dkxls23 at gmail.com Tue Nov 18 08:05:14 2014 From: dkxls23 at gmail.com (Armin Wehrfritz) Date: Tue, 18 Nov 2014 15:05:14 +0200 Subject: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing In-Reply-To: <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> References: <54522E18.7000700@gmail.com> <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> Message-ID: <546B440A.5030204@gmail.com> OK, I'm still not yet able to reproduce this bug, but at least I was able to write out some state files. As mentioned before, I only see this happening in a client/server mode, i.e. running pvserver on a remote machine. Three state files are attached, simply visualizing 2D cut-plane data: 1. colorLegBug_OK.pvsm: Everything is still working fine and color legend appears as expected. 2. colorLegBug_Fail_0.pvsm: Switched the color array (from 'Z' to 'SourcePV') -> color legend disappears for 'SourcePV', but still is present when switching back to 'Z' 3. colorLegBug_Fail_1.pvsm: After some more switching of color arrays, the color legend disappears for all quantities. Hope this gives some clues to track down this bug. Thanks, Armin On 10/31/2014 01:34 AM, Scott, W Alan wrote: > Yep, that's the bug. I have seen it local server. Anyone else have any ideas how to replicate it? If anyone does see it, mind writing a state file and sending to me? It's a long shot, but maybe that will help us figure out what is going on. > > Thanks, > > Alan > > -----Original Message----- > From: Armin Wehrfritz [mailto:dkxls23 at gmail.com] > Sent: Thursday, October 30, 2014 6:25 AM > To: Scott, W Alan; paraview at paraview.org > Subject: [EXTERNAL] Re: [Paraview] PV 4.2.0 Color legend disappearing > > I have experienced it too, but cannot reproduce it! > > For me it happened so far only in a client-server setup. When I grab the surface (HDF5/XDMF files; 2D unstructured cells) and rotate or move it, the legend comes back, but will disappear as soon as I release the surface again. > When copying the very same data to my local machine and visualizing it in a local ParaView session, everything works fine. > > Very odd indeed! > > My workstation: > openSUSE 13.1 > ParaView 4.2.0 > Intel Core i7-4800QM QC Processor > NVIDIA Quadro K2100M Graphics Card > > -Armin > > > > On 10/30/2014 01:26 AM, Scott, W Alan wrote: >> In ParaView 4.2.0, I have found a few cases where the color legend >> disappears, and I can't get it back. Has anyone else seen this, and >> found a way to replicate it? Mind passing the voodoo on how to >> replicate this bug? >> Thanks, >> Alan >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> -------------- next part -------------- A non-text attachment was scrubbed... Name: colorLegBug.tar.gz Type: application/gzip Size: 47618 bytes Desc: not available URL: From tanakas at gmx.ch Tue Nov 18 08:35:08 2014 From: tanakas at gmx.ch (Tanaka Simon) Date: Tue, 18 Nov 2014 14:35:08 +0100 Subject: [Paraview] translate geometry in space Message-ID: <546B4B0C.6090908@gmx.ch> Dear ParaView Users, I have a vtm 2D data structure, containing: -> vtp polygons -> vti image data (field) data now i want to translate the polygons (for an 'explosion view'), i.e. i want to add +1 to all z-coordinates of the polygons. how can i do that? do i have to code it in the "programmable filter"? thanks for any suggestion simon From samuelkey at bresnan.net Tue Nov 18 09:48:25 2014 From: samuelkey at bresnan.net (Samuel Key) Date: Tue, 18 Nov 2014 07:48:25 -0700 Subject: [Paraview] translate geometry in space In-Reply-To: <546B4B0C.6090908@gmx.ch> References: <546B4B0C.6090908@gmx.ch> Message-ID: <546B5C39.6080809@bresnan.net> Simon, Assuming your 2D datum set is in x,y-coordinates, one can expand this to 3D by adding a 0.0 value for the "missing" z-coordinate. PV has a Transform filter that will then let you add a constant value to the z-coordinate, or, equally easily, scale the z-coordinate. On the other hand, if you really want to create a "carpet" plot that makes your 2D datum set appear as 'mountains and valleys,' one can likewise add the datum attribute (for example, density) as if it were the z-coordinate. Again, PV's Transform filter will let you scale the z-coordinate into a range that makes the image pleasing. It will be a 3D image, that is easily oriented for viewing. The coloring can be either by any of the point values, or a single color of your choosing. There may be a more direct way to achieve this that someone else can explain? Hope this helps. Sam On 11/18/2014 6:35 AM, Tanaka Simon wrote: > Dear ParaView Users, > > I have a vtm 2D data structure, containing: > -> vtp polygons > -> vti image data (field) data > > > now i want to translate the polygons (for an 'explosion view'), i.e. i > want to add +1 to all z-coordinates of the polygons. > > > how can i do that? do i have to code it in the "programmable filter"? > > > thanks for any suggestion > simon > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From mona.minkara at gmail.com Tue Nov 18 15:10:02 2014 From: mona.minkara at gmail.com (MONA MINKARA) Date: Tue, 18 Nov 2014 15:10:02 -0500 Subject: [Paraview] Trying to visualize molecular trajectories from AMBER with a binary netCDF file Message-ID: Hi all, I am trying to visualize the flow of certain molecules in a simulation with 300,000 atoms simulated over 500 time steps. The trajectories were generated in AMBER and output as a binary netCDF file. A text netCDF file could not correctly store such a large data set. How can I get paraview read the netCDF that I have and then use it to plot the flow of certain molecules? Thank you Mona Minkara Graduate Student Quantum Theory Project University of Florida Department of Chemistry From tanakas at gmx.ch Tue Nov 18 15:41:53 2014 From: tanakas at gmx.ch (Tanaka Simon) Date: Tue, 18 Nov 2014 21:41:53 +0100 Subject: [Paraview] translate geometry in space In-Reply-To: <546B5C39.6080809@bresnan.net> References: <546B4B0C.6090908@gmx.ch> <546B5C39.6080809@bresnan.net> Message-ID: <546BAF11.2030207@gmx.ch> Thank you, Sam, "Transform" was what i was looking for. However, consider the following situation: -> two identical polygons (well, almost identical, in the order of machine epsilon) -> applying the 'Transform' to both of them: moving both by 100 in +z direction Then, strangely, they do not coincide nicely any more. It seems that there is some massive inaccuracy introduced by applying the 'Transform filter'.... Does anyone have ever encountered that artefact? Any suggestions to remove/reduce that? Best wishes Simon On 18.11.2014 15:48, Samuel Key wrote: > Simon, > > Assuming your 2D datum set is in x,y-coordinates, one can expand this > to 3D by adding a 0.0 value for the "missing" z-coordinate. > > PV has a Transform filter that will then let you add a constant value > to the z-coordinate, or, equally easily, scale the z-coordinate. > > On the other hand, if you really want to create a "carpet" plot that > makes your 2D datum set appear as 'mountains and valleys,' one can > likewise add the datum attribute (for example, density) as if it were > the z-coordinate. Again, PV's Transform filter will let you scale the > z-coordinate into a range that makes the image pleasing. It will be a > 3D image, that is easily oriented for viewing. The coloring can be > either by any of the point values, or a single color of your choosing. > > There may be a more direct way to achieve this that someone else can > explain? > > Hope this helps. > > Sam > > On 11/18/2014 6:35 AM, Tanaka Simon wrote: >> Dear ParaView Users, >> >> I have a vtm 2D data structure, containing: >> -> vtp polygons >> -> vti image data (field) data >> >> >> now i want to translate the polygons (for an 'explosion view'), i.e. >> i want to add +1 to all z-coordinates of the polygons. >> >> >> how can i do that? do i have to code it in the "programmable filter"? >> >> >> thanks for any suggestion >> simon >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From rohitnarurkar at gmail.com Wed Nov 19 00:07:24 2014 From: rohitnarurkar at gmail.com (Rohit Narurkar) Date: Wed, 19 Nov 2014 10:37:24 +0530 Subject: [Paraview] Display velocity in paraview Message-ID: Dear all, I have a 400x400 lattice grid, where each lattice has a velocity u and v in the x and y direction respectively. I wish to display this in paraview, which filters should I use? and how do I proceed? Thank you, Rohit Narurkar -------------- next part -------------- An HTML attachment was scrubbed... URL: From jan.brezina at tul.cz Wed Nov 19 09:43:11 2014 From: jan.brezina at tul.cz (Jan Brezina) Date: Wed, 19 Nov 2014 15:43:11 +0100 Subject: [Paraview] Problem with vtkStringData in Composite dataset Message-ID: <546CAC7F.9050109@tul.cz> Dear paraview users, I have a MultiBlock Dataset containing a single leaf (vktPolyData) with PointData having a vtkStringArray named "labels". I try to display these labels selection the block and setting label format "%s". This approach works if that leaf block is treated out of the composite dataset, but within composite dataset I get a warning: Warning: In /home/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release/paraview/src/paraview/VTK/Rendering/Label/vtkLabeledDataMapper.cxx, line 442 vtkLabeledDataMapper (0x597e640): Could not find label array (labels) in input. and no labels are shown. Then I tried to use ExtractBlock + MergeBlocks and apply selection there, but MergeBlocks simply drops the "labels" array. Is it an error or should I do something special to make such an AbstractArray work. Below you find a ProgrammableSource script to generate a sample MultiblockDataset for reproduction of the problem. Here I set "labels" array to all leaf blocks with the same result. Thank you for help Jan ============================= import vtk def make_rect(coords): xmin,ymin,xmax,ymax=coords pts = vtk.vtkPoints() pts.InsertPoint(0, xmin, ymin, 0) pts.InsertPoint(1, xmax, ymin, 0) pts.InsertPoint(2, xmax, ymax, 0) pts.InsertPoint(3, xmin, ymax, 0) rect = vtk.vtkCellArray() rect.InsertNextCell(5) rect.InsertCellPoint(0) rect.InsertCellPoint(1) rect.InsertCellPoint(2) rect.InsertCellPoint(3) rect.InsertCellPoint(0) output = vtk.vtkPolyData() output.SetPoints(pts) output.SetLines(rect) labels=vtk.vtkStringArray() labels.InsertNextValue("one") labels.InsertNextValue("two") labels.InsertNextValue("three") labels.InsertNextValue("four") labels.SetName("labels") output.GetPointData().AddArray(labels) tenths=vtk.vtkIntArray() tenths.InsertNextValue(10) tenths.InsertNextValue(20) tenths.InsertNextValue(30) tenths.InsertNextValue(40) tenths.SetName("tenths") output.GetPointData().AddArray(tenths) return output output.SetBlock(0, make_rect( (0,0,1,1) ) ) output.SetBlock(1, make_rect( (1,1,2,2) ) ) which -- ------------------------ Mgr. Jan Brezina, Ph. D. Technical University in Liberec, New technologies institute http://www.nti.tul.cz/cz/WikiUser:Jan.Brezina From dkxls23 at gmail.com Wed Nov 19 09:45:43 2014 From: dkxls23 at gmail.com (Armin Wehrfritz) Date: Wed, 19 Nov 2014 16:45:43 +0200 Subject: [Paraview] Display velocity in paraview In-Reply-To: References: Message-ID: <546CAD17.8020304@gmail.com> This should be fairly straight forward once you have a reader for your data. Hence the first questions that comes up: In which file format is the data stored? ParaView has a large selection of readers for all kinds of file formats, ranging from simple text files (i.e. CSV files) to advanced HPC file formats like XDMF. See here: http://www.paraview.org/Wiki/ParaView/Users_Guide/List_of_readers I personally prefer writing my data in XDMF/HDF5 files, for which ParaView has a very good reader. For custom, but still simple, file formats also the "Python Programmable Filter" might be an option. Google will give you several examples for that. -Armin On 11/19/2014 07:07 AM, Rohit Narurkar wrote: > Dear all, > > I have a 400x400 lattice grid, where each lattice has a velocity u and v > in the x and y direction respectively. I wish to display this in > paraview, which filters should I use? and how do I proceed? > > Thank you, > Rohit Narurkar > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From zhz1993622 at 163.com Wed Nov 19 10:25:14 2014 From: zhz1993622 at 163.com (=?GBK?B?1ty649ba?=) Date: Wed, 19 Nov 2014 23:25:14 +0800 (CST) Subject: [Paraview] The question of the ability of paraview's Parallelism Message-ID: <2c19f872.114b3.149c8a84f94.Coremail.zhz1993622@163.com> At first ?Thank you for the help of David E DeMarle ?But I still have some problem about it . I want to ask a question .If I have a 10G data file ,I want to use paraview to visual it . The file is stored in one computer and share with other computers through NFS (file share system). whether I can use just some computers which its memory is 4G to visual the file ? Thank you for your help . zhou -------------- next part -------------- An HTML attachment was scrubbed... URL: From g.brito at aia.rwth-aachen.de Wed Nov 19 12:24:39 2014 From: g.brito at aia.rwth-aachen.de (Gonzalo Brito Gadeschi) Date: Wed, 19 Nov 2014 18:24:39 +0100 Subject: [Paraview] Paraview Plugin: two enumerations next to each other Message-ID: I'm trying to write an IntVectorProperty with two drop down list next to each other. Ideally it would call a function that takes to arguments, and passes the value of each drop down menu to each argument. I am however open to workarounds. This is my best attempt but of course it crashes paraview: Any ideas / suggestions about how to achieve this? Bests, Gonzalo -- Dipl.-Ing. Gonzalo Brito Gadeschi Institute of Aerodynamics and Chair of Fluid Mechanics RWTH Aachen University Wuellnerstra?e 5a D-52062 Aachen Germany Phone: ++49-(0)241-80-94821 Fax: ++49-(0)241-80-92257 E-mail: g.brito at aia.rwth-aachen.de Internet: www.aia.rwth-aachen.de -------------- next part -------------- An HTML attachment was scrubbed... URL: From ehsan.saei at gmail.com Thu Nov 20 05:51:16 2014 From: ehsan.saei at gmail.com (ehsan saei) Date: Thu, 20 Nov 2014 11:51:16 +0100 Subject: [Paraview] [off-toppic] binary stl output of paraview Message-ID: Dear all, I have a question about stl output of paraview. I try to use paraview for designing some structures and and then I export those structures with stl (binary) format. but when I try to read the file using Ghex software of ubuntu except from the first line the rest of file looks like this: 7RI????'7()07RI????'7?u 7RI??O?;7P????m?l?5??6RI?8)??7??]6RI?8I@ ?7??]6RI??I@?7K??>?m?l?5??6RI??)??75??6RI?8)??7??]6RI??I@ ?7???5??6RI??)??7??]6RI??I@ ?7(I6RI???E?7????K?6RI??\?75??6RI??)??7(I6RI???E?7C??ql??K?6RI?8\?7?K?6RI??\?7(I6RI???E?7C??ql?(I6RI?8?E?7 Do you have any suggestion? I do apologize if this question is not allowed in this mail-list. Thanks in advance, Ehsan -------------- next part -------------- An HTML attachment was scrubbed... URL: From utkarsh.ayachit at kitware.com Thu Nov 20 09:28:48 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Thu, 20 Nov 2014 08:28:48 -0600 Subject: [Paraview] Paraview Plugin: two enumerations next to each other In-Reply-To: References: Message-ID: The default widget portfolio in ParaView doesn't support such a property. However, you can implement a custom pqPropertyWidget subclass that places 2 combo-boxes. Use pqIntVectorPropertyWidget [1] as a reference. [2],[3] may be useful reads to understand the property-widget infrastructure in ParaView. Utkarsh [1] http://www.paraview.org/ParaView3/Doc/Nightly/www/cxx-doc/classpqIntVectorPropertyWidget.html [2] http://www.paraview.org/Wiki/ParaView/Properties_Panel [3] http://www.paraview.org/Wiki/Plugin_HowTo#Adding_Customizations_for_Properties_Panel On Wed, Nov 19, 2014 at 11:24 AM, Gonzalo Brito Gadeschi wrote: > I'm trying to write an IntVectorProperty with two drop down list next to > each other. > > Ideally it would call a function that takes to arguments, and passes the > value of each drop down menu to each argument. I am however open to > workarounds. > > This is my best attempt but of course it crashes paraview: > > command="set_load_node_neighbors" > number_of_elements="2" > default_values="-1 -2"> > > > > > > > > > > > > > > > Any ideas / suggestions about how to achieve this? > > Bests, > Gonzalo > > -- > Dipl.-Ing. Gonzalo Brito Gadeschi > Institute of Aerodynamics and Chair of Fluid Mechanics > RWTH Aachen University > Wuellnerstra?e 5a > D-52062 Aachen > Germany > Phone: ++49-(0)241-80-94821 > Fax: ++49-(0)241-80-92257 > E-mail: g.brito at aia.rwth-aachen.de > Internet: www.aia.rwth-aachen.de > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Thu Nov 20 09:33:38 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Thu, 20 Nov 2014 08:33:38 -0600 Subject: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing In-Reply-To: <546B440A.5030204@gmail.com> References: <54522E18.7000700@gmail.com> <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> <546B440A.5030204@gmail.com> Message-ID: Great! Thanks, Armin. I'll give it a try once I get back home from my travel and see if I can reproduce the issue and track it down. Utkarsh On Tue, Nov 18, 2014 at 7:05 AM, Armin Wehrfritz wrote: > OK, I'm still not yet able to reproduce this bug, but at least I was able to > write out some state files. > > As mentioned before, I only see this happening in a client/server mode, i.e. > running pvserver on a remote machine. > > Three state files are attached, simply visualizing 2D cut-plane data: > 1. colorLegBug_OK.pvsm: > Everything is still working fine and color legend appears as > expected. > 2. colorLegBug_Fail_0.pvsm: > Switched the color array (from 'Z' to 'SourcePV') -> color legend > disappears for 'SourcePV', but still is present when switching back > to 'Z' > 3. colorLegBug_Fail_1.pvsm: > After some more switching of color arrays, the color legend > disappears for all quantities. > > Hope this gives some clues to track down this bug. > > Thanks, > Armin > > > > > > On 10/31/2014 01:34 AM, Scott, W Alan wrote: >> >> Yep, that's the bug. I have seen it local server. Anyone else have any >> ideas how to replicate it? If anyone does see it, mind writing a state file >> and sending to me? It's a long shot, but maybe that will help us figure out >> what is going on. >> >> Thanks, >> >> Alan >> >> -----Original Message----- >> From: Armin Wehrfritz [mailto:dkxls23 at gmail.com] >> Sent: Thursday, October 30, 2014 6:25 AM >> To: Scott, W Alan; paraview at paraview.org >> Subject: [EXTERNAL] Re: [Paraview] PV 4.2.0 Color legend disappearing >> >> I have experienced it too, but cannot reproduce it! >> >> For me it happened so far only in a client-server setup. When I grab the >> surface (HDF5/XDMF files; 2D unstructured cells) and rotate or move it, the >> legend comes back, but will disappear as soon as I release the surface >> again. >> When copying the very same data to my local machine and visualizing it in >> a local ParaView session, everything works fine. >> >> Very odd indeed! >> >> My workstation: >> openSUSE 13.1 >> ParaView 4.2.0 >> Intel Core i7-4800QM QC Processor >> NVIDIA Quadro K2100M Graphics Card >> >> -Armin >> >> >> >> On 10/30/2014 01:26 AM, Scott, W Alan wrote: >>> >>> In ParaView 4.2.0, I have found a few cases where the color legend >>> disappears, and I can't get it back. Has anyone else seen this, and >>> found a way to replicate it? Mind passing the voodoo on how to >>> replicate this bug? >>> Thanks, >>> Alan >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From dkxls23 at gmail.com Thu Nov 20 10:45:51 2014 From: dkxls23 at gmail.com (Armin Wehrfritz) Date: Thu, 20 Nov 2014 17:45:51 +0200 Subject: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing In-Reply-To: References: <54522E18.7000700@gmail.com> <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> <546B440A.5030204@gmail.com> Message-ID: <546E0CAF.60803@gmail.com> I actually realized that the state files I provided used a rather large dataset that I didn't provide. However, I actually have been able to reproduce the bug now consistently when using an explicit server/client setup. Here the steps to trigger the disappearance to the color legend: 1) run pvserver (e.g. on the local machine) 2) Connect to pvserver 3) Add a source (e.g. cylinder or sphere) 4) Change the displayed quantities, i.e. the color array, about 5-10 times. Usually I can display each color array at least one time, but when switching several times between them the legend disappears. As said, without using an explicit connection to pvserver I cannot trigger this bug. I attached again two state files, this time using the cylinder source only. Thanks for taking care of this! -Armin My workstation: openSUSE 13.1 ParaView 4.2.0 Intel Core i7-4800QM QC NVIDIA Quadro K2100M On 11/20/2014 04:33 PM, Utkarsh Ayachit wrote: > Great! Thanks, Armin. I'll give it a try once I get back home from my > travel and see if I can reproduce the issue and track it down. > > Utkarsh > > On Tue, Nov 18, 2014 at 7:05 AM, Armin Wehrfritz > wrote: >> OK, I'm still not yet able to reproduce this bug, but at least I >> was able to write out some state files. >> >> As mentioned before, I only see this happening in a client/server >> mode, i.e. running pvserver on a remote machine. >> >> Three state files are attached, simply visualizing 2D cut-plane >> data: 1. colorLegBug_OK.pvsm: Everything is still working fine and >> color legend appears as expected. 2. colorLegBug_Fail_0.pvsm: >> Switched the color array (from 'Z' to 'SourcePV') -> color legend >> disappears for 'SourcePV', but still is present when switching back >> to 'Z' 3. colorLegBug_Fail_1.pvsm: After some more switching of >> color arrays, the color legend disappears for all quantities. >> >> Hope this gives some clues to track down this bug. >> >> Thanks, Armin >> >> >> >> >> >> On 10/31/2014 01:34 AM, Scott, W Alan wrote: >>> >>> Yep, that's the bug. I have seen it local server. Anyone else >>> have any ideas how to replicate it? If anyone does see it, mind >>> writing a state file and sending to me? It's a long shot, but >>> maybe that will help us figure out what is going on. >>> >>> Thanks, >>> >>> Alan >>> >>> -----Original Message----- From: Armin Wehrfritz >>> [mailto:dkxls23 at gmail.com] Sent: Thursday, October 30, 2014 6:25 >>> AM To: Scott, W Alan; paraview at paraview.org Subject: [EXTERNAL] >>> Re: [Paraview] PV 4.2.0 Color legend disappearing >>> >>> I have experienced it too, but cannot reproduce it! >>> >>> For me it happened so far only in a client-server setup. When I >>> grab the surface (HDF5/XDMF files; 2D unstructured cells) and >>> rotate or move it, the legend comes back, but will disappear as >>> soon as I release the surface again. When copying the very same >>> data to my local machine and visualizing it in a local ParaView >>> session, everything works fine. >>> >>> Very odd indeed! >>> >>> My workstation: openSUSE 13.1 ParaView 4.2.0 Intel Core >>> i7-4800QM QC Processor NVIDIA Quadro K2100M Graphics Card >>> >>> -Armin >>> >>> >>> >>> On 10/30/2014 01:26 AM, Scott, W Alan wrote: >>>> >>>> In ParaView 4.2.0, I have found a few cases where the color >>>> legend disappears, and I can't get it back. Has anyone else >>>> seen this, and found a way to replicate it? Mind passing the >>>> voodoo on how to replicate this bug? Thanks, Alan >>>> >>>> >>>> _______________________________________________ Powered by >>>> www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >> >> _______________________________________________ Powered by >> www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> -------------- next part -------------- -------------- next part -------------- From Anton.Piccardo-Selg at tessella.com Thu Nov 20 10:47:02 2014 From: Anton.Piccardo-Selg at tessella.com (Anton.Piccardo-Selg at tessella.com) Date: Thu, 20 Nov 2014 15:47:02 +0000 Subject: [Paraview] Problem with setting the scalar range for the lookup table of a newly added source Message-ID: An HTML attachment was scrubbed... URL: From luc.bordier at sirehna.com Thu Nov 20 11:28:06 2014 From: luc.bordier at sirehna.com (Luc Bordier) Date: Thu, 20 Nov 2014 17:28:06 +0100 Subject: [Paraview] scalarbar visibility issue in client/server mode Message-ID: <546E1696.7010700@sirehna.com> An HTML attachment was scrubbed... URL: From florian.hoffmann at inutech.de Thu Nov 20 11:32:56 2014 From: florian.hoffmann at inutech.de (Florian Hoffmann) Date: Thu, 20 Nov 2014 17:32:56 +0100 Subject: [Paraview] MapDataArrayToVertexAttribute question / extending PointSprites plugin In-Reply-To: References: <5464A1CF.6010408@inutech.de> Message-ID: <546E17B8.7090102@inutech.de> Hi Utkarsh, dear all, thanks for your answer. This was just an example (maybe a rather stupid one). Please let me rephrase my question: I am trying to extend the pointSprites plugin with my own shaders. For this I would like to pass up to 3 size parameters and the 4 components of quarternions for orientation to the shader code. Currently I do it like this: void vtkPointSpriteProperty::Render(vtkActor *act, vtkRenderer *ren) { vtkPainterPolyDataMapper* mapper = vtkPainterPolyDataMapper::SafeDownCast(act->GetMapper()); if (mapper) { mapper->RemoveVertexAttributeMapping("SizeParam1"); mapper->MapDataArrayToVertexAttribute("SizeParam1", this->SizeParam1ArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); mapper->RemoveVertexAttributeMapping("SizeParam2"); mapper->MapDataArrayToVertexAttribute("SizeParam2", this->SizeParam2ArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); mapper->RemoveVertexAttributeMapping("SizeParam3"); mapper->MapDataArrayToVertexAttribute("SizeParam3", this->SizeParam3ArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); mapper->RemoveVertexAttributeMapping("rotQionW"); mapper->MapDataArrayToVertexAttribute("rotQionW", this->RotQionWArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); mapper->RemoveVertexAttributeMapping("rotQionX"); mapper->MapDataArrayToVertexAttribute("rotQionX", this->RotQionXArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); mapper->RemoveVertexAttributeMapping("rotQionY"); mapper->MapDataArrayToVertexAttribute("rotQionY", this->RotQionYArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); mapper->RemoveVertexAttributeMapping("rotQionZ"); mapper->MapDataArrayToVertexAttribute("rotQionZ", this->RotQionZArrayName, vtkDataObject::FIELD_ASSOCIATION_POINTS, -1); if (this->Internal->PushedAttrib == 0) { glPushAttrib(GL_ALL_ATTRIB_BITS); this->Internal->PushedAttrib = 1; } glEnable(vtkgl::VERTEX_PROGRAM_POINT_SIZE_ARB); float sizeParam1Span[2]; sizeParam1Span[0] = this->SizeParam1Range[0]; sizeParam1Span[1] = (this->SizeParam1Range[1] - this->SizeParam1Range[0]); this->AddShaderVariable("SizeParam1Span", 2, sizeParam1Span); float sizeParam2Span[2]; sizeParam2Span[0] = this->SizeParam2Range[0]; sizeParam2Span[1] = (this->SizeParam2Range[1] - this->SizeParam2Range[0]); this->AddShaderVariable("SizeParam2Span", 2, sizeParam2Span); float sizeParam3Span[2]; sizeParam3Span[0] = this->SizeParam3Range[0] * factor; sizeParam3Span[1] = (this->SizeParam3Range[1] - this->SizeParam3Range[0]); this->AddShaderVariable("SizeParam3Span", 2, sizeParam3Span); float rotQionWSpan[2]; rotQionWSpan[0] = this->RotQionWRange[0]; rotQionWSpan[1] = (this->RotQionWRange[1] - this->RotQionWRange[0]); this->AddShaderVariable("rotQionWSpan", 2, rotQionWSpan); float rotQionXSpan[2]; rotQionXSpan[0] = this->RotQionXRange[0]; rotQionXSpan[1] = (this->RotQionXRange[1] - this->RotQionXRange[0]); this->AddShaderVariable("rotQionXSpan", 2, rotQionXSpan); float rotQionYSpan[2]; rotQionYSpan[0] = this->RotQionYRange[0]; rotQionYSpan[1] = (this->RotQionYRange[1] - this->RotQionYRange[0]); this->AddShaderVariable("rotQionYSpan", 2, rotQionYSpan); float rotQionZSpan[2]; rotQionZSpan[0] = this->RotQionZRange[0]; rotQionZSpan[1] = (this->RotQionZRange[1] - this->RotQionZRange[0]); this->AddShaderVariable("rotQionZSpan", 2, rotQionZSpan); this->Superclass::Render(act, ren); } in my vertex shader code I have something like this in float SizeParam1; in float SizeParam2; in float SizeParam3; uniform vec2 SizeParam1Span; uniform vec2 SizeParam2Span; uniform vec2 SizeParam3Span; vec3 radius = vec3(0.0, 0.0, 0.0); radius.x = SizeParam1Span.x+SizeParam1*SizeParam1Span.y; radius.y = SizeParam2Span.x+SizeParam2*SizeParam2Span.y; radius.z = SizeParam3Span.x+SizeParam3*SizeParam3Span.y; ... in float rotQionW; in float rotQionX; in float rotQionY; in float rotQionZ; uniform vec2 rotQionWSpan; uniform vec2 rotQionXSpan; uniform vec2 rotQionYSpan; uniform vec2 rotQionZSpan; vec4 rotQions=vec4(1.0,0.0,0.0,0.0); rotQions.w = rotQionWSpan.x + rotQionW * rotQionWSpan.y; rotQions.x = rotQionXSpan.x + rotQionX * rotQionXSpan.y; rotQions.y = rotQionYSpan.x + rotQionY * rotQionYSpan.y; rotQions.z = rotQionZSpan.x + rotQionZ * rotQionZSpan.y; ... I discovered that my the data of the field variable (this->...ArrayName) passed into MapDataArrayToVertexAttribute(...) is somehow between 0 and 1. This is why I also have to pass the span to convert it back ( as it is done in the original pointSprite plugin code). Even though I can render some geometry (for example ellipsoids) around several points/vertices (=this means my shader code works), I have the feeling that the Mapping to the individual vertices is not working as expected ! For example in the case of having three vertices of which each one has different values for SizeParam1, SizeParam2 and SizeParam3 - for example: v1 : pos(0,0,0) SizeParam1 = 1.0, SizeParam2 = 1.0, SizeParam3 = 1.0 v2 : pos(0,1,0) SizeParam1 = 1.0, SizeParam2 = 2.0, SizeParam3 = 0.5 v3 : pos(0,0,1) SizeParam1 = 1.0, SizeParam2 = 1.0, SizeParam3 = 1.0 where the values for SizeParam1, SizeParam2 and SizeParam3 are taken from the selected fields (=multiblock, where individual blocks represent individual time steps) associated with the points/vertices. Nevertheless the individual vertices do not seem to receive their correct values ! My current problem is that all of them are rendered the same size, thus I assume that the shader variables are not passed as expected. The essential difference to the original pointSprites code is that I have several calls to mapper->RemoveVertexAttributeMapping(...); mapper->MapDataArrayToVertexAttribute(...); whereas in the original pointSprites implementation there was only 1 call for the RadiusArray. I checked with the debugger and found that the mappings are added to the array vtkGenericVertexAttributeMapping* mappings in void vtkPainterPolyDataMapper::MapDataArrayToVertexAttribute( const char* vertexAttributeName, const char* dataArrayName, int field, int componentno) { vtkGenericVertexAttributeMapping* mappings = 0; if( this->PainterInformation->Has( vtkPrimitivePainter::DATA_ARRAY_TO_VERTEX_ATTRIBUTE()) ) { mappings = vtkGenericVertexAttributeMapping::SafeDownCast( this->PainterInformation->Get( vtkPolyDataPainter::DATA_ARRAY_TO_VERTEX_ATTRIBUTE())); } if (mappings==NULL) { mappings = vtkGenericVertexAttributeMapping::New(); this->PainterInformation->Set( vtkPolyDataPainter::DATA_ARRAY_TO_VERTEX_ATTRIBUTE(), mappings); mappings->Delete(); } mappings->AddMapping( vertexAttributeName, dataArrayName, field, componentno); } Nevertheless I do not know how to further investigate my problem or where to start looking for the actual mapping and data passing process. Maybe anybody could point me to the catch here or to the interesting bits of code I should check or maybe explain me about the contraints when passing varying field data to shaders. Is/Might the fact that I have a multi-block dataset somehow affecting the mapping process ? Thanks Best regards, Florian Am 15.11.2014 um 04:29 schrieb Utkarsh Ayachit: > Florian, > > MapDataArrayToVertexAttribute expects the data array to be present in > the input data going into the mapper itself. I see you're creating a > new `darr`, but I don't see it being added to a dataset and then that > being passed on to the mapper. Are you doing that? > > Having said that, you should look into adding a filter to add this > data array to your dataset, vtkProperty/vtkPointSpriteProperty isn't a > the best place to change input dataset being fed to the mapper. > > Utkarsh > > On Thu, Nov 13, 2014 at 7:19 AM, Florian Hoffmann > wrote: >> Dear all, >> >> I am trying to reuse some code from the point sprites plugin. >> I would like to pass some size information onto some shader code for nine >> different points like this: >> >> void vtkPointSpriteProperty::Render(vtkActor *act, vtkRenderer *ren) >> >> { >> >> >> >> vtkPainterPolyDataMapper* mapper = >> >> vtkPainterPolyDataMapper::SafeDownCast(act->GetMapper()); >> >> >> vtkSmartPointer darr = >> vtkSmartPointer::New(); >> >> darr->SetNumberOfTuples(9); >> >> darr->SetName("testArray"); >> >> double size_tuple[1] = {0.2}; >> >> darr->SetNumberOfComponents(1); >> >> >> darr->SetTupleValue(0, size_tuple); >> >> darr->SetTupleValue(1, size_tuple); >> >> darr->SetTupleValue(2, size_tuple); >> >> darr->SetTupleValue(3, size_tuple); >> >> darr->SetTupleValue(4, size_tuple); >> >> darr->SetTupleValue(5, size_tuple); >> >> darr->SetTupleValue(6, size_tuple); >> >> darr->SetTupleValue(7, size_tuple); >> >> darr->SetTupleValue(8, size_tuple); >> >> >> >> mapper->RemoveVertexAttributeMapping("SizeParam1"); >> mapper->MapDataArrayToVertexAttribute("SizeParam1", darr->GetName(), >> >> vtkDataObject::FIELD_ASSOCIATION_POINTS, 0); >> >> >> >> glPushAttrib(GL_ALL_ATTRIB_BITS); >> >> glEnable(vtkgl::VERTEX_PROGRAM_POINT_SIZE_ARB); >> >> this->Superclass::Render(act, ren); >> } >> >> shader code : >> >> attribute float SizeParam1; >> >> attribute float SizeParam2; >> >> attribute float SizeParam3; >> >> >> vec3 GetSizeParams() >> >> { >> >> vec3 sizeparams=vec3(0.0,0.5,0.8); >> >> sizeparams.x = SizeParam1; >> >> // sizeparams.y = SizeParam2; >> // sizeparams.z = SizeParam3; >> >> >> return sizeparams; >> >> } >> >> >> >> Question: How is the 0.2 stored in the tuple modified while passed to the >> shader code ? >> >> Because the value arriving in the >> shader code seems to be different from the value 0.2 which is stored in the >> tuples. >> I noticed, because if I hardwire 0.2 in the shader code like this >> >> >> vec3 GetSizeParams() >> >> { >> >> vec3 sizeparams=vec3(0.2,0.5,0.8); >> >> return sizeparams; >> } >> >> I see a different rendering. >> >> Could anyone please cast a light into this issue and tell me what I am doing >> wrong or rather which settings influencing the mapping I should draw my >> attention to ? >> >> Thanks. >> >> Best regards, >> >> Florian >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> -- Mit freundlichen Gr??en -- Dr.-Ing. Florian Hoffmann inuTech GmbH Phone : +49-(0)911-323843-22 Fuerther Strasse 212 Fax : +49-(0)911-323843-43 90429 Nuernberg E-Mai l : florian.hoffmann at inutech.de Germany Internet : http://www.inutech.de inuTech GmbH Sitz / Registered Office: Nuernberg Handelsregister / Companies' Register: AG N?rnberg HRB Nr. 19026 Gesch?ftsf?hrer / Managing Director: Frank Vogel ***************************************************************** DIFFPACK - THE NEW GENERATION OF SIMULATION-SOFTWARE! Go to http://www.diffpack.com to read the details ***************************************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: From dkxls23 at gmail.com Thu Nov 20 11:40:07 2014 From: dkxls23 at gmail.com (Armin Wehrfritz) Date: Thu, 20 Nov 2014 18:40:07 +0200 Subject: [Paraview] scalarbar visibility issue in client/server mode In-Reply-To: <546E1696.7010700@sirehna.com> References: <546E1696.7010700@sirehna.com> Message-ID: <546E1967.4030403@gmail.com> This issue has been already reported/discussed here on the mailing list and we are in the process of tracking it down. Search the mailing-list archive for "PV 4.2.0 Color legend disappearing". -Armin On 11/20/2014 06:28 PM, Luc Bordier wrote: > Hello, > > I am using paraview 4.2.0 in client / server mode and i am facing > problem of visibility of colorbars. > > After i proceeded my different filters (slice, streamlines,...), my > colobars are disappearing from the rendering view. > What is strange is that if i am interacting the view, the colorbars are > shown again. And when i get still, they disappeared again. > Then the only way to show scalarbars is to interact the view. > I made this observation with : > > linux server (RHEL 5.8), linux client on same host > linux server (RHEL 5.8), windows client (win 7) > > Is it a known issue ? any drawbacks ? > > Thank you > > > -- > Luc Bordier > DCNS Research/SIREHNA > Responsable d'?tudes et de recherche (MSH) > 1, rue de la No?, BP 42105, F44321 NANTES CEDEX 3 > T?l : 02 51 86 02 93 > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From luc.bordier at sirehna.com Thu Nov 20 11:43:56 2014 From: luc.bordier at sirehna.com (Luc Bordier) Date: Thu, 20 Nov 2014 17:43:56 +0100 Subject: [Paraview] scalarbar visibility issue in client/server mode In-Reply-To: <546E1967.4030403@gmail.com> References: <546E1696.7010700@sirehna.com> <546E1967.4030403@gmail.com> Message-ID: <546E1A4C.2080808@sirehna.com> An HTML attachment was scrubbed... URL: From wascott at sandia.gov Thu Nov 20 15:57:02 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Thu, 20 Nov 2014 20:57:02 +0000 Subject: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing In-Reply-To: <546E0CAF.60803@gmail.com> References: <54522E18.7000700@gmail.com> <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> <546B440A.5030204@gmail.com> <546E0CAF.60803@gmail.com> Message-ID: <43d67f57c1394d85a195f8791ccbe154@ES05AMSNLNT.srn.sandia.gov> Perfect!! I have replicated this bug, and repeated it a few time. Breaks every time. Thanks Armin for writing it up!! I just targeted PV 4.3, out next month for the fix. Bug number http://www.paraview.org/Bug/view.php?id=15143 Alan -----Original Message----- From: Armin Wehrfritz [mailto:dkxls23 at gmail.com] Sent: Thursday, November 20, 2014 8:46 AM To: Utkarsh Ayachit Cc: Scott, W Alan; paraview at paraview.org Subject: Re: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing I actually realized that the state files I provided used a rather large dataset that I didn't provide. However, I actually have been able to reproduce the bug now consistently when using an explicit server/client setup. Here the steps to trigger the disappearance to the color legend: 1) run pvserver (e.g. on the local machine) 2) Connect to pvserver 3) Add a source (e.g. cylinder or sphere) 4) Change the displayed quantities, i.e. the color array, about 5-10 times. Usually I can display each color array at least one time, but when switching several times between them the legend disappears. As said, without using an explicit connection to pvserver I cannot trigger this bug. I attached again two state files, this time using the cylinder source only. Thanks for taking care of this! -Armin My workstation: openSUSE 13.1 ParaView 4.2.0 Intel Core i7-4800QM QC NVIDIA Quadro K2100M On 11/20/2014 04:33 PM, Utkarsh Ayachit wrote: > Great! Thanks, Armin. I'll give it a try once I get back home from my > travel and see if I can reproduce the issue and track it down. > > Utkarsh > > On Tue, Nov 18, 2014 at 7:05 AM, Armin Wehrfritz > wrote: >> OK, I'm still not yet able to reproduce this bug, but at least I was >> able to write out some state files. >> >> As mentioned before, I only see this happening in a client/server >> mode, i.e. running pvserver on a remote machine. >> >> Three state files are attached, simply visualizing 2D cut-plane >> data: 1. colorLegBug_OK.pvsm: Everything is still working fine and >> color legend appears as expected. 2. colorLegBug_Fail_0.pvsm: >> Switched the color array (from 'Z' to 'SourcePV') -> color legend >> disappears for 'SourcePV', but still is present when switching back >> to 'Z' 3. colorLegBug_Fail_1.pvsm: After some more switching of color >> arrays, the color legend disappears for all quantities. >> >> Hope this gives some clues to track down this bug. >> >> Thanks, Armin >> >> >> >> >> >> On 10/31/2014 01:34 AM, Scott, W Alan wrote: >>> >>> Yep, that's the bug. I have seen it local server. Anyone else >>> have any ideas how to replicate it? If anyone does see it, mind >>> writing a state file and sending to me? It's a long shot, but maybe >>> that will help us figure out what is going on. >>> >>> Thanks, >>> >>> Alan >>> >>> -----Original Message----- From: Armin Wehrfritz >>> [mailto:dkxls23 at gmail.com] Sent: Thursday, October 30, 2014 6:25 AM >>> To: Scott, W Alan; paraview at paraview.org Subject: [EXTERNAL] >>> Re: [Paraview] PV 4.2.0 Color legend disappearing >>> >>> I have experienced it too, but cannot reproduce it! >>> >>> For me it happened so far only in a client-server setup. When I grab >>> the surface (HDF5/XDMF files; 2D unstructured cells) and rotate or >>> move it, the legend comes back, but will disappear as soon as I >>> release the surface again. When copying the very same data to my >>> local machine and visualizing it in a local ParaView session, >>> everything works fine. >>> >>> Very odd indeed! >>> >>> My workstation: openSUSE 13.1 ParaView 4.2.0 Intel Core i7-4800QM QC >>> Processor NVIDIA Quadro K2100M Graphics Card >>> >>> -Armin >>> >>> >>> >>> On 10/30/2014 01:26 AM, Scott, W Alan wrote: >>>> >>>> In ParaView 4.2.0, I have found a few cases where the color legend >>>> disappears, and I can't get it back. Has anyone else seen this, >>>> and found a way to replicate it? Mind passing the voodoo on how to >>>> replicate this bug? Thanks, Alan >>>> >>>> >>>> _______________________________________________ Powered by >>>> www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >> >> _______________________________________________ Powered by >> www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> From mike.jackson at bluequartz.net Thu Nov 20 20:39:09 2014 From: mike.jackson at bluequartz.net (Michael Jackson) Date: Thu, 20 Nov 2014 20:39:09 -0500 Subject: [Paraview] [off-toppic] binary stl output of paraview In-Reply-To: References: Message-ID: The STL File format can be either ASCII or Binary. ParaView is exporting a binary file. ParaView _may_ offer the option to write out an ASCII file. Looks like Ghex software can only read an ASCII STL file. Mike Jackson On Nov 20, 2014, at 5:51 AM, ehsan saei wrote: > Dear all, > > I have a question about stl output of paraview. > I try to use paraview for designing some structures and and then I export those structures with stl (binary) format. but when I try to read the file using Ghex software of ubuntu except from the first line the rest of file looks like this: > > 7RI????'7()07RI????'7?u 7RI??O?;7P????m?l?5??6RI?8)??7??]6RI?8I@?7??]6RI??I@?7K??>?m?l?5??6RI??)??75??6RI?8)??7??]6RI??I@?7???5??6RI??)??7??]6RI??I@?7(I6RI???E?7????K?6RI??\?75??6RI??)??7(I6RI???E?7C??ql??K?6RI?8\?7?K?6RI??\?7(I6RI???E?7C??ql?(I6RI?8?E?7 > > Do you have any suggestion? > I do apologize if this question is not allowed in this mail-list. > > Thanks in advance, > Ehsan > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview From furutaka.kazuyoshi at jaea.go.jp Thu Nov 20 23:24:57 2014 From: furutaka.kazuyoshi at jaea.go.jp (Kazuyoshi Furutaka) Date: Fri, 21 Nov 2014 13:24:57 +0900 (JST) Subject: [Paraview] thousands separators in "Annotate Time"? Message-ID: <20141121.132457.20618009.furutaka.kazuyoshi@jaea.go.jp> Dear experts, A simple question; how can I display thousands separators using the "Annotate Time" source? Thanks in advance, Kazuyoshi -- Kazuyoshi Furutaka furutaka _dot_ kazuyoshi _at_ jaea _dot_ go _dot_ jp From alexandre.ancel at cemosis.fr Fri Nov 21 08:30:08 2014 From: alexandre.ancel at cemosis.fr (Alexandre Ancel) Date: Fri, 21 Nov 2014 14:30:08 +0100 Subject: [Paraview] Interfacing with FE simulation using Catalyst Message-ID: Hello, I am trying to use catalyst in our Finite Element framework, but I can't get it to work right now. For background information, I would like to inferface a parallel simulation, running with MPI, with paraview to display the results, thus do live visualization. I compiled Paraview from the 4.2 sources (from the website) to ensure that our library compiles with the same library as the ParaView I'm launching. The problem I have is similar to the one reported in: http://public.kitware.com/pipermail/paraview/2013-June/028497.html In our application, we have an exporter interface that allows to write VTK data (vtkUnstructuredGrid) with field data (scalar, vectorial). I built the catalyst interoperation on top of it, by using the Cxx example provided in: https://github.com/Kitware/ParaViewCatalystExampleCode/tree/master/CxxFullExample I'm am using a modified version of the feslicescript.py that should enable live visualization IMHO (enclosed with this email). The excerpt of C++ code running the coprocessing is the following one: ---- vtkSmartPointer dataDescription = vtkSmartPointer::New(); dataDescription->AddInput("input"); if(inSituProcessor->RequestDataDescription(dataDescription.GetPointer()) != 0) { dataDescription->GetInputDescriptionByName("input")->SetGrid(out); dataDescription->SetForceOutput(true); std::cout << "CoProcess " << inSituProcessor->CoProcess(dataDescription.GetPointer())<< std::endl; } ---- where out is the unstructured grid data. I then launch Paraview and allow connection for catalyst via the menu. Eventually I launch our simulation that interfaces with Catalyst. I then get the following error in Paraview: ERROR: In /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Parallel/Core/vtkSocketCommunicator.cxx, line 812 vtkSocketCommunicator (0x2b1f940): Could not receive tag. 1 And the coprocessing stops in Paraview, altough I can see the catalyst server in the Pipeline browser and a PVTrivialProducer1 appearing in the background, but no data appear in the visualization window of Paraview. I tried instrumenting the code in Paraview to locate where the problem would be, but it appears that the problem happens outside of the vtkLiveInsituLink class, which (correct me If I'm wrong) should handle the link between the application and Paraview. The different questions that I have would be summed up as: - Can you give me some pointer as to where the problem might be located ? Coding mistake on my side ? Did I miss something in the issue I referred to before ? - Is it possible to pause the simulation while the user manipulates data in Paraview ? How ? Sorry for the long mail, but I tried to be as precise as I could be, Thanks in advance for the help and your time, Best regards, Alexandre Ancel -- Alexandre Ancel Docteur, Ing?nieur de recherche / Phd, Research Engineer Cemosis - alexandre.ancel at cemosis.fr Tel: +33 (0)3 68 8*5 02 06* IRMA - 7, rue Ren? Descartes 67 000 Strasbourg, France -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: insitu.py Type: text/x-python-script Size: 2545 bytes Desc: not available URL: From dan.lipsa at kitware.com Fri Nov 21 09:16:14 2014 From: dan.lipsa at kitware.com (Dan Lipsa) Date: Fri, 21 Nov 2014 09:16:14 -0500 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hi Alexandre, The following blog post describes how to pause the simulation and how to manipulate data in Catalyst Live. http://www.kitware.com/blog/home/post/722 Could you try the scripts attached in the blog post? Do those work? Thanks, Dan On Fri, Nov 21, 2014 at 8:30 AM, Alexandre Ancel wrote: > Hello, > > I am trying to use catalyst in our Finite Element framework, but I can't > get it to work right now. For background information, I would like to > inferface a parallel simulation, running with MPI, with paraview to display > the results, thus do live visualization. > > I compiled Paraview from the 4.2 sources (from the website) to ensure that > our library compiles with the same library as the ParaView I'm launching. > > The problem I have is similar to the one reported in: > http://public.kitware.com/pipermail/paraview/2013-June/028497.html > > > In our application, we have an exporter interface that allows to write VTK > data (vtkUnstructuredGrid) with field data (scalar, vectorial). I built the > catalyst interoperation on top of it, by using the Cxx example provided in: > > https://github.com/Kitware/ParaViewCatalystExampleCode/tree/master/CxxFullExample > > I'm am using a modified version of the feslicescript.py > > that should enable live visualization IMHO (enclosed with this email). > > The excerpt of C++ code running the coprocessing is the following one: > ---- > vtkSmartPointer dataDescription = > vtkSmartPointer::New(); > dataDescription->AddInput("input"); > > if(inSituProcessor->RequestDataDescription(dataDescription.GetPointer()) > != 0) > { > dataDescription->GetInputDescriptionByName("input")->SetGrid(out); > dataDescription->SetForceOutput(true); > std::cout << "CoProcess " << > inSituProcessor->CoProcess(dataDescription.GetPointer())<< std::endl; > } > ---- > where out is the unstructured grid data. > > I then launch Paraview and allow connection for catalyst via the menu. > Eventually I launch our simulation that interfaces with Catalyst. > > I then get the following error in Paraview: > ERROR: In > /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Parallel/Core/vtkSocketCommunicator.cxx, > line 812 > vtkSocketCommunicator (0x2b1f940): Could not receive tag. 1 > > And the coprocessing stops in Paraview, altough I can see the catalyst > server in the Pipeline browser and a PVTrivialProducer1 appearing in the > background, but no data appear in the visualization window of Paraview. > > I tried instrumenting the code in Paraview to locate where the problem > would be, but it appears that the problem happens outside of the > vtkLiveInsituLink class, which (correct me If I'm wrong) should handle the > link between the application and Paraview. > > The different questions that I have would be summed up as: > - Can you give me some pointer as to where the problem might be located ? > Coding mistake on my side ? Did I miss something in the issue I referred to > before ? > - Is it possible to pause the simulation while the user manipulates data > in Paraview ? How ? > > Sorry for the long mail, but I tried to be as precise as I could be, > Thanks in advance for the help and your time, > > Best regards, > Alexandre Ancel > > -- > Alexandre Ancel > Docteur, Ing?nieur de recherche / Phd, Research Engineer > Cemosis - alexandre.ancel at cemosis.fr > Tel: +33 (0)3 68 8*5 02 06* > IRMA - 7, rue Ren? Descartes > 67 000 Strasbourg, France > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sebastien.jourdain at kitware.com Fri Nov 21 10:52:03 2014 From: sebastien.jourdain at kitware.com (Sebastien Jourdain) Date: Fri, 21 Nov 2014 08:52:03 -0700 Subject: [Paraview] thousands separators in "Annotate Time"? In-Reply-To: <20141121.132457.20618009.furutaka.kazuyoshi@jaea.go.jp> References: <20141121.132457.20618009.furutaka.kazuyoshi@jaea.go.jp> Message-ID: You can use the PythonAnnotation filter instead with the following expression "{:,}".format(t_value) On Thu, Nov 20, 2014 at 9:24 PM, Kazuyoshi Furutaka < furutaka.kazuyoshi at jaea.go.jp> wrote: > Dear experts, > > A simple question; how can I display thousands separators > using the "Annotate Time" source? > > Thanks in advance, > Kazuyoshi > -- > Kazuyoshi Furutaka > furutaka _dot_ kazuyoshi _at_ jaea _dot_ go _dot_ jp > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > -------------- next part -------------- An HTML attachment was scrubbed... URL: From alexandre.ancel at cemosis.fr Fri Nov 21 11:09:40 2014 From: alexandre.ancel at cemosis.fr (Alexandre Ancel) Date: Fri, 21 Nov 2014 17:09:40 +0100 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hello Dan, Thanks for the link to the blog post (I totally missed this one). I tested the example provided in the blog post, it worked and it made me understand from where my issue came from. In fact, the simulation was running and connected to Paraview via catalyst, but I only had one time step, so as soon as it went throught the Catalyst code, the app continued its execution and ended before I could visualize data in Paraview. I then put a user data input before the end of the execution, and now I am able to see my data in the PVTrivialProducer1 in Paraview. But an other issue arose then: When I click on the icon located near the producer to visualize the data, I get an Extract component added to the pipeline. Trying to visualize this, then throws me the following errors: --- ERROR: In /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, line 810 vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type vtkDataObject, but a vtkPolyData is required. ERROR: In /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, line 810 vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type vtkDataObject, but a vtkPolyData is required. ERROR: In /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, line 504 vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot be shown in the defaulted render view!! --- Note that when I look in the Information of the TrivialProducer, data is recognized as Unstructured grid with the correct point, cell and field data information. Do I need to provide specific info in the python script ? Like a conversion to vtkUnstructuredGrid ? A few more questions come in my mind now: - If I understand correctly and if the user wants to pause the simulation, for example when he has only 1 timestep, he would have to do the following steps: * Connect with catalyst in Paraview * Set a breakpoint for time step 0 * launch the simulation Is that alright ? Would it be possible to do this with the play/next frame paraview buttons ? - Looking at the last lines of the blog post concerning pvserver. Is pvserver catalyst enabled by default ? Does it mean that I can build the following pipeline ? Paraview (local computer) <-> pvserver (cluster frontal node) <-> catalyst enabled simulation (cluster nodes) Thanks again for your help (it helped me a lot in understanding the whole process) Best regards, Alexandre Ancel On Fri, Nov 21, 2014 at 3:16 PM, Dan Lipsa wrote: > Hi Alexandre, > The following blog post describes how to pause the simulation and how to > manipulate data in Catalyst Live. > > http://www.kitware.com/blog/home/post/722 > > Could you try the scripts attached in the blog post? Do those work? > Thanks, > Dan > > > On Fri, Nov 21, 2014 at 8:30 AM, Alexandre Ancel < > alexandre.ancel at cemosis.fr> wrote: > >> Hello, >> >> I am trying to use catalyst in our Finite Element framework, but I can't >> get it to work right now. For background information, I would like to >> inferface a parallel simulation, running with MPI, with paraview to display >> the results, thus do live visualization. >> >> I compiled Paraview from the 4.2 sources (from the website) to ensure >> that our library compiles with the same library as the ParaView I'm >> launching. >> >> The problem I have is similar to the one reported in: >> http://public.kitware.com/pipermail/paraview/2013-June/028497.html >> >> >> In our application, we have an exporter interface that allows to write >> VTK data (vtkUnstructuredGrid) with field data (scalar, vectorial). I built >> the catalyst interoperation on top of it, by using the Cxx example provided >> in: >> >> https://github.com/Kitware/ParaViewCatalystExampleCode/tree/master/CxxFullExample >> >> I'm am using a modified version of the feslicescript.py >> >> that should enable live visualization IMHO (enclosed with this email). >> >> The excerpt of C++ code running the coprocessing is the following one: >> ---- >> vtkSmartPointer dataDescription = >> vtkSmartPointer::New(); >> dataDescription->AddInput("input"); >> >> if(inSituProcessor->RequestDataDescription(dataDescription.GetPointer()) >> != 0) >> { >> dataDescription->GetInputDescriptionByName("input")->SetGrid(out); >> dataDescription->SetForceOutput(true); >> std::cout << "CoProcess " << >> inSituProcessor->CoProcess(dataDescription.GetPointer())<< std::endl; >> } >> ---- >> where out is the unstructured grid data. >> >> I then launch Paraview and allow connection for catalyst via the menu. >> Eventually I launch our simulation that interfaces with Catalyst. >> >> I then get the following error in Paraview: >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Parallel/Core/vtkSocketCommunicator.cxx, >> line 812 >> vtkSocketCommunicator (0x2b1f940): Could not receive tag. 1 >> >> And the coprocessing stops in Paraview, altough I can see the catalyst >> server in the Pipeline browser and a PVTrivialProducer1 appearing in the >> background, but no data appear in the visualization window of Paraview. >> >> I tried instrumenting the code in Paraview to locate where the problem >> would be, but it appears that the problem happens outside of the >> vtkLiveInsituLink class, which (correct me If I'm wrong) should handle the >> link between the application and Paraview. >> >> The different questions that I have would be summed up as: >> - Can you give me some pointer as to where the problem might be located ? >> Coding mistake on my side ? Did I miss something in the issue I referred to >> before ? >> - Is it possible to pause the simulation while the user manipulates data >> in Paraview ? How ? >> >> Sorry for the long mail, but I tried to be as precise as I could be, >> Thanks in advance for the help and your time, >> >> Best regards, >> Alexandre Ancel >> >> -- >> Alexandre Ancel >> Docteur, Ing?nieur de recherche / Phd, Research Engineer >> Cemosis - alexandre.ancel at cemosis.fr >> Tel: +33 (0)3 68 8*5 02 06* >> IRMA - 7, rue Ren? Descartes >> 67 000 Strasbourg, France >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> > -- Alexandre Ancel Docteur, Ing?nieur de recherche / Phd, Research Engineer Cemosis - alexandre.ancel at cemosis.fr Tel: +33 (0)3 68 8*5 02 06* IRMA - 7, rue Ren? Descartes 67 000 Strasbourg, France -------------- next part -------------- An HTML attachment was scrubbed... URL: From dan.lipsa at kitware.com Fri Nov 21 12:14:54 2014 From: dan.lipsa at kitware.com (Dan Lipsa) Date: Fri, 21 Nov 2014 12:14:54 -0500 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: > > > When I click on the icon located near the producer to visualize the data, > I get an Extract component added to the pipeline. Trying to visualize this, > then throws me the following errors: > > --- > ERROR: In > /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, > line 810 > vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on > input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type > vtkDataObject, but a vtkPolyData is required. > > > ERROR: In > /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, > line 810 > vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on > input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type > vtkDataObject, but a vtkPolyData is required. > > > ERROR: In > /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, > line 504 > vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot be > shown in the defaulted render view!! > --- > I have not run an example for an unstructured grid. It should work similarly though. I recently wrote a Catalyst adapter for an unstructured grid. I will run Catalyst Live with that to see how that works. You could try however to save images or entire data from the pipeline script as it is done in the Catalyst examples. > A few more questions come in my mind now: > - If I understand correctly and if the user wants to pause the simulation, > for example when he has only 1 timestep, he would have to do the following > steps: > * Connect with catalyst in Paraview > * Set a breakpoint for time step 0 > * launch the simulation > Is that alright ? > Would it be possible to do this with the play/next frame paraview buttons ? > The communication between catalyst and the simulation happens only at time steps. Because of that, Catalyst could only stop the simulation at time step 2. - Looking at the last lines of the blog post concerning pvserver. Is > pvserver catalyst enabled by default ? > Yes. > Does it mean that I can build the following pipeline ? > Paraview (local computer) <-> pvserver (cluster frontal node) <-> catalyst > enabled simulation (cluster nodes) > You need to enable MPI to be able to run this. pvserver is the paraview server that does all the rendering, only images are sent to ParaView (GUI). Dan -------------- next part -------------- An HTML attachment was scrubbed... URL: From dan.lipsa at kitware.com Fri Nov 21 14:08:33 2014 From: dan.lipsa at kitware.com (Dan Lipsa) Date: Fri, 21 Nov 2014 14:08:33 -0500 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa wrote: > >> When I click on the icon located near the producer to visualize the data, >> I get an Extract component added to the pipeline. Trying to visualize this, >> then throws me the following errors: >> >> --- >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >> line 810 >> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >> vtkDataObject, but a vtkPolyData is required. >> >> >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >> line 810 >> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >> vtkDataObject, but a vtkPolyData is required. >> >> >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >> line 504 >> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot be >> shown in the defaulted render view!! >> --- >> > > I have not run an example for an unstructured grid. It should work > similarly though. > I recently wrote a Catalyst adapter for an unstructured grid. I will run > Catalyst Live with that to see how that works. > > You could try however to save images or entire data from the pipeline > script as it is done in the Catalyst examples. > > Hello Alexandre, Live View runs fine with an unstructured grid. Try to write data out to disk as it is done in the Catalyst examples as it is a simpler code path. Does that work? Dan -------------- next part -------------- An HTML attachment was scrubbed... URL: From andy.bauer at kitware.com Fri Nov 21 16:57:23 2014 From: andy.bauer at kitware.com (Andy Bauer) Date: Fri, 21 Nov 2014 16:57:23 -0500 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hi Alexandre, If you could reproduce the errors that you're getting in one of the examples, we could try to track that down. I tried using your script and didn't have any issues with the CxxFullExample in the Catalyst example code and PV 4.2. Regards, Andy On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa wrote: > >> When I click on the icon located near the producer to visualize the data, >> I get an Extract component added to the pipeline. Trying to visualize this, >> then throws me the following errors: >> >> --- >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >> line 810 >> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >> vtkDataObject, but a vtkPolyData is required. >> >> >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >> line 810 >> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >> vtkDataObject, but a vtkPolyData is required. >> >> >> ERROR: In >> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >> line 504 >> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot be >> shown in the defaulted render view!! >> --- >> > > I have not run an example for an unstructured grid. It should work > similarly though. > I recently wrote a Catalyst adapter for an unstructured grid. I will run > Catalyst Live with that to see how that works. > > You could try however to save images or entire data from the pipeline > script as it is done in the Catalyst examples. > > > >> A few more questions come in my mind now: >> - If I understand correctly and if the user wants to pause the >> simulation, for example when he has only 1 timestep, he would have to do >> the following steps: >> * Connect with catalyst in Paraview >> * Set a breakpoint for time step 0 >> * launch the simulation >> Is that alright ? >> Would it be possible to do this with the play/next frame paraview buttons >> ? >> > > The communication between catalyst and the simulation happens only at time > steps. Because of that, Catalyst could only stop the simulation at time > step 2. > > > - Looking at the last lines of the blog post concerning pvserver. Is >> pvserver catalyst enabled by default ? >> > Yes. > > >> Does it mean that I can build the following pipeline ? >> Paraview (local computer) <-> pvserver (cluster frontal node) <-> >> catalyst enabled simulation (cluster nodes) >> > > You need to enable MPI to be able to run this. pvserver is the paraview > server that does all the rendering, only images are sent to ParaView (GUI). > > Dan > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cory.quammen at kitware.com Fri Nov 21 23:40:05 2014 From: cory.quammen at kitware.com (Cory Quammen) Date: Fri, 21 Nov 2014 23:40:05 -0500 Subject: [Paraview] Problem with setting the scalar range for the lookup table of a newly added source In-Reply-To: References: Message-ID: Anton, Maybe try adding stc->getProxy()->UpdateVTKObjects(); after setting the scalar range? It's always possible there is a bug in the rescaling logic. Do you have a minimal code example you could post to make it easier to track down? Thanks, Cory On Thu, Nov 20, 2014 at 10:47 AM, wrote: > Hi, > > I am currently working on a visulalizer which makes use of ParaView. I am > running into an issue when manipulating the lookup table for a newly added > source. > > Here is my issue in detail: > > First I load a source. I then set the lookup table to have a specific range. > I get the representation repr and do the following: > > pqScalarsToColors* stc = repr->getLookUpTable(); > stc->setScalarRange(min, max); > repr->getProxy()->UpdateVTKObjects(); > repr->renderViewEventually(); > > I have min set to a value which is smaller than the lowest entry of the data > set and max is set to a value which is also smaller than the highest entry > of the data set. > > Looking at the displayed scalar range, it seems that the lookup table is set > to my min value and to the highest entry of the data set instead of my max > value. > > When I do the same thing with max being set higher than the largest value of > the data set, I don't get this issue. > > What am I missing? > > Thanks > > Anton > > This message is commercial in confidence and may be privileged. It is > intended for the > addressee(s) only. Access to this message by anyone else is unauthorized and > strictly prohibited. > If you have received this message in error, please inform the sender > immediately. Please note that > messages sent or received by the Tessella e-mail system may be monitored and > stored in an > information retrieval system. > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > From utkarsh.ayachit at kitware.com Sat Nov 22 14:37:49 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Sat, 22 Nov 2014 14:37:49 -0500 Subject: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing In-Reply-To: <43d67f57c1394d85a195f8791ccbe154@ES05AMSNLNT.srn.sandia.gov> References: <54522E18.7000700@gmail.com> <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> <546B440A.5030204@gmail.com> <546E0CAF.60803@gmail.com> <43d67f57c1394d85a195f8791ccbe154@ES05AMSNLNT.srn.sandia.gov> Message-ID: Looks like this may already be fixed too. I could not reproduce it with v4.2.0-133-g7e996c8. Alan, can you test with git/master to see if you can reproduce it as you could with 4.2? Thanks, Utkarsh On Thu, Nov 20, 2014 at 3:57 PM, Scott, W Alan wrote: > Perfect!! > > I have replicated this bug, and repeated it a few time. Breaks every time. Thanks Armin for writing it up!! I just targeted PV 4.3, out next month for the fix. > > Bug number http://www.paraview.org/Bug/view.php?id=15143 > > Alan > > -----Original Message----- > From: Armin Wehrfritz [mailto:dkxls23 at gmail.com] > Sent: Thursday, November 20, 2014 8:46 AM > To: Utkarsh Ayachit > Cc: Scott, W Alan; paraview at paraview.org > Subject: Re: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing > > I actually realized that the state files I provided used a rather large dataset that I didn't provide. > > However, I actually have been able to reproduce the bug now consistently when using an explicit server/client setup. > > Here the steps to trigger the disappearance to the color legend: > 1) run pvserver (e.g. on the local machine) > 2) Connect to pvserver > 3) Add a source (e.g. cylinder or sphere) > 4) Change the displayed quantities, i.e. the color array, about 5-10 times. Usually I can display each color array at least one time, but when switching several times between them the legend disappears. > > As said, without using an explicit connection to pvserver I cannot trigger this bug. > > I attached again two state files, this time using the cylinder source only. > > Thanks for taking care of this! > > -Armin > > > My workstation: > openSUSE 13.1 > ParaView 4.2.0 > Intel Core i7-4800QM QC > NVIDIA Quadro K2100M > > > > > > > > > > > > On 11/20/2014 04:33 PM, Utkarsh Ayachit wrote: >> Great! Thanks, Armin. I'll give it a try once I get back home from my >> travel and see if I can reproduce the issue and track it down. >> >> Utkarsh >> >> On Tue, Nov 18, 2014 at 7:05 AM, Armin Wehrfritz >> wrote: >>> OK, I'm still not yet able to reproduce this bug, but at least I was >>> able to write out some state files. >>> >>> As mentioned before, I only see this happening in a client/server >>> mode, i.e. running pvserver on a remote machine. >>> >>> Three state files are attached, simply visualizing 2D cut-plane >>> data: 1. colorLegBug_OK.pvsm: Everything is still working fine and >>> color legend appears as expected. 2. colorLegBug_Fail_0.pvsm: >>> Switched the color array (from 'Z' to 'SourcePV') -> color legend >>> disappears for 'SourcePV', but still is present when switching back >>> to 'Z' 3. colorLegBug_Fail_1.pvsm: After some more switching of color >>> arrays, the color legend disappears for all quantities. >>> >>> Hope this gives some clues to track down this bug. >>> >>> Thanks, Armin >>> >>> >>> >>> >>> >>> On 10/31/2014 01:34 AM, Scott, W Alan wrote: >>>> >>>> Yep, that's the bug. I have seen it local server. Anyone else >>>> have any ideas how to replicate it? If anyone does see it, mind >>>> writing a state file and sending to me? It's a long shot, but maybe >>>> that will help us figure out what is going on. >>>> >>>> Thanks, >>>> >>>> Alan >>>> >>>> -----Original Message----- From: Armin Wehrfritz >>>> [mailto:dkxls23 at gmail.com] Sent: Thursday, October 30, 2014 6:25 AM >>>> To: Scott, W Alan; paraview at paraview.org Subject: [EXTERNAL] >>>> Re: [Paraview] PV 4.2.0 Color legend disappearing >>>> >>>> I have experienced it too, but cannot reproduce it! >>>> >>>> For me it happened so far only in a client-server setup. When I grab >>>> the surface (HDF5/XDMF files; 2D unstructured cells) and rotate or >>>> move it, the legend comes back, but will disappear as soon as I >>>> release the surface again. When copying the very same data to my >>>> local machine and visualizing it in a local ParaView session, >>>> everything works fine. >>>> >>>> Very odd indeed! >>>> >>>> My workstation: openSUSE 13.1 ParaView 4.2.0 Intel Core i7-4800QM QC >>>> Processor NVIDIA Quadro K2100M Graphics Card >>>> >>>> -Armin >>>> >>>> >>>> >>>> On 10/30/2014 01:26 AM, Scott, W Alan wrote: >>>>> >>>>> In ParaView 4.2.0, I have found a few cases where the color legend >>>>> disappears, and I can't get it back. Has anyone else seen this, >>>>> and found a way to replicate it? Mind passing the voodoo on how to >>>>> replicate this bug? Thanks, Alan >>>>> >>>>> >>>>> _______________________________________________ Powered by >>>>> www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>> >>> >>> _______________________________________________ Powered by >>> www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> From Anton.Piccardo-Selg at tessella.com Sun Nov 23 14:34:21 2014 From: Anton.Piccardo-Selg at tessella.com (Anton.Piccardo-Selg at tessella.com) Date: Sun, 23 Nov 2014 19:34:21 +0000 Subject: [Paraview] Problem with setting the scalar range for the lookup table of a newly added source In-Reply-To: References: , Message-ID: An HTML attachment was scrubbed... URL: From breton at cynicmansion.ru Mon Nov 24 06:17:03 2014 From: breton at cynicmansion.ru (Boris Bobrov) Date: Mon, 24 Nov 2014 14:17:03 +0300 Subject: [Paraview] Paraview architecture Message-ID: <10475F00-9C0E-42CE-821E-FF00389FE2B1@cynicmansion.ru> Hello, I am trying to understand the architecture of paraview and it's dataflow. 1. What kind of rendering happens on client side? What rendering does default paraview client perform? Does it use OpenGL or something? What happens when I drag an image in the client? 2. What kind of data flows between a client, a data server and a rendering server? What's the format? I tried to search the wiki but either I am a bad lurker or it's not there. I am also not sure which mailing list to use, so I'll send this email to both. -- WBR, Boris -------------- next part -------------- An HTML attachment was scrubbed... URL: From joachim.pouderoux at kitware.com Mon Nov 24 09:10:07 2014 From: joachim.pouderoux at kitware.com (Joachim Pouderoux) Date: Mon, 24 Nov 2014 15:10:07 +0100 Subject: [Paraview] [Paraview-developers] Paraview architecture In-Reply-To: <10475F00-9C0E-42CE-821E-FF00389FE2B1@cynicmansion.ru> References: <10475F00-9C0E-42CE-821E-FF00389FE2B1@cynicmansion.ru> Message-ID: Boris, In the 3D View, and depending on the Render View settings, the client may render the geometry (that is the external surface) of the datasets that it receives from the server using OpenGL, or it can receive and display the images (remote rendering) generated by the server. With the first mode, the interaction is performed locally with some VTK graphical pipelines (camera, interactors, rendere, etc.); when the rendering is performed remotely, the client sends the local camera properties to the server so it can generate images from the correct viewpoint. So depending the mode, the raw surface geometry can be transfered or some compressed images (different compression techniques are available, see Settings / Render View panel). Some other views (eg. 2D plots) may have different behaviour and might require the full dataset to be transfered from the server to the client for display/analysis (in this case, this will not scale of course : eg. if you plot a huge UnstructuredGrid within a Line Plot view after applying the Plot Data filter)... Hope it helps, Joachim *Joachim Pouderoux* *PhD, Technical Expert* *Kitware SAS * 2014-11-24 12:17 GMT+01:00 Boris Bobrov : > Hello, > > I am trying to understand the architecture of paraview and it's dataflow. > > 1. What kind of rendering happens on client side? What rendering does > default paraview client perform? Does it use OpenGL or something? What > happens when I drag an image in the client? > > 2. What kind of data flows between a client, a data server and a rendering > server? What's the format? > > I tried to search the wiki but either I am a bad lurker or it's not there. > I am also not sure which mailing list to use, so I'll send this email to > both. > -- > WBR, > Boris > _______________________________________________ > Paraview-developers mailing list > Paraview-developers at paraview.org > http://public.kitware.com/mailman/listinfo/paraview-developers > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave.demarle at kitware.com Mon Nov 24 09:54:32 2014 From: dave.demarle at kitware.com (David E DeMarle) Date: Mon, 24 Nov 2014 09:54:32 -0500 Subject: [Paraview] [Paraview-developers] Paraview architecture In-Reply-To: References: <10475F00-9C0E-42CE-821E-FF00389FE2B1@cynicmansion.ru> Message-ID: Also see, http://www.paraview.org/Wiki/Representations_and_Views. It is out of date ever since since 3.14's redesign of the rendering architecture so the names of the classes are different but the overall flow is the same. David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Mon, Nov 24, 2014 at 9:10 AM, Joachim Pouderoux < joachim.pouderoux at kitware.com> wrote: > Boris, > > In the 3D View, and depending on the Render View settings, the client may > render the geometry (that is the external surface) of the datasets that it > receives from the server using OpenGL, or it can receive and display the > images (remote rendering) generated by the server. With the first mode, the > interaction is performed locally with some VTK graphical pipelines (camera, > interactors, rendere, etc.); when the rendering is performed remotely, the > client sends the local camera properties to the server so it can generate > images from the correct viewpoint. > > So depending the mode, the raw surface geometry can be transfered or some > compressed images (different compression techniques are available, see > Settings / Render View panel). > > Some other views (eg. 2D plots) may have different behaviour and might > require the full dataset to be transfered from the server to the client for > display/analysis (in this case, this will not scale of course : eg. if you > plot a huge UnstructuredGrid within a Line Plot view after applying the > Plot Data filter)... > > Hope it helps, > > Joachim > > *Joachim Pouderoux* > > *PhD, Technical Expert* > *Kitware SAS * > > > 2014-11-24 12:17 GMT+01:00 Boris Bobrov : > >> Hello, >> >> I am trying to understand the architecture of paraview and it's dataflow. >> >> 1. What kind of rendering happens on client side? What rendering does >> default paraview client perform? Does it use OpenGL or something? What >> happens when I drag an image in the client? >> >> 2. What kind of data flows between a client, a data server and a >> rendering server? What's the format? >> >> I tried to search the wiki but either I am a bad lurker or it's not >> there. I am also not sure which mailing list to use, so I'll send this >> email to both. >> -- >> WBR, >> Boris >> _______________________________________________ >> Paraview-developers mailing list >> Paraview-developers at paraview.org >> http://public.kitware.com/mailman/listinfo/paraview-developers >> >> > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From artemiev.mikhail at gmail.com Mon Nov 24 10:06:38 2014 From: artemiev.mikhail at gmail.com (Mikhail Artemyev) Date: Mon, 24 Nov 2014 09:06:38 -0600 Subject: [Paraview] factor in axis label for cube axes Message-ID: <5473497E.9030902@gmail.com> Dear all, How can I change the factor in the axis label? For example, if the x-coordinate is from 0 to 2000 (see the attached picture), the axis label is "X-Axis (x10^3)", and the values on the axis are from 0.0 to 2.0. If I change the x-axis label it affects the name only, the factor stays the same. I would like to make the coordinates be shown in the original scale: 0 to 2000, without the factor in brackets. Thank you, Mikhail -------------- next part -------------- A non-text attachment was scrubbed... Name: paraview_axis.png Type: image/png Size: 3435 bytes Desc: not available URL: From alexandre.ancel at cemosis.fr Mon Nov 24 10:56:40 2014 From: alexandre.ancel at cemosis.fr (Alexandre Ancel) Date: Mon, 24 Nov 2014 16:56:40 +0100 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hello, I tested writing data from the python script, and the data is apparently written correctly when opening the files with Paraview. The issue is only present I try to extract the data in Paraview. I'll continue to investigate both in my code and Paraview. If you have other pieces of advice as to where I could be looking, I would be interested. I will also test if I can reproduce the issue with one of the example. Regards, Alexandre Ancel On Fri, Nov 21, 2014 at 10:57 PM, Andy Bauer wrote: > Hi Alexandre, > > If you could reproduce the errors that you're getting in one of the > examples, we could try to track that down. I tried using your script and > didn't have any issues with the CxxFullExample in the Catalyst example code > and PV 4.2. > > > Regards, > Andy > > On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa wrote: > >> >>> When I click on the icon located near the producer to visualize the >>> data, I get an Extract component added to the pipeline. Trying to visualize >>> this, then throws me the following errors: >>> >>> --- >>> ERROR: In >>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>> line 810 >>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>> vtkDataObject, but a vtkPolyData is required. >>> >>> >>> ERROR: In >>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>> line 810 >>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>> vtkDataObject, but a vtkPolyData is required. >>> >>> >>> ERROR: In >>> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >>> line 504 >>> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot be >>> shown in the defaulted render view!! >>> --- >>> >> >> I have not run an example for an unstructured grid. It should work >> similarly though. >> I recently wrote a Catalyst adapter for an unstructured grid. I will run >> Catalyst Live with that to see how that works. >> >> You could try however to save images or entire data from the pipeline >> script as it is done in the Catalyst examples. >> >> >> >>> A few more questions come in my mind now: >>> - If I understand correctly and if the user wants to pause the >>> simulation, for example when he has only 1 timestep, he would have to do >>> the following steps: >>> * Connect with catalyst in Paraview >>> * Set a breakpoint for time step 0 >>> * launch the simulation >>> Is that alright ? >>> Would it be possible to do this with the play/next frame paraview >>> buttons ? >>> >> >> The communication between catalyst and the simulation happens only at >> time steps. Because of that, Catalyst could only stop the simulation at >> time step 2. >> >> >> - Looking at the last lines of the blog post concerning pvserver. Is >>> pvserver catalyst enabled by default ? >>> >> Yes. >> >> >>> Does it mean that I can build the following pipeline ? >>> Paraview (local computer) <-> pvserver (cluster frontal node) <-> >>> catalyst enabled simulation (cluster nodes) >>> >> >> You need to enable MPI to be able to run this. pvserver is the paraview >> server that does all the rendering, only images are sent to ParaView (GUI). >> >> Dan >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> > -- Alexandre Ancel Docteur, Ing?nieur de recherche / Phd, Research Engineer Cemosis - alexandre.ancel at cemosis.fr Tel: +33 (0)3 68 8*5 02 06* IRMA - 7, rue Ren? Descartes 67 000 Strasbourg, France -------------- next part -------------- An HTML attachment was scrubbed... URL: From burlen.loring at gmail.com Mon Nov 24 12:29:29 2014 From: burlen.loring at gmail.com (burlen) Date: Mon, 24 Nov 2014 09:29:29 -0800 Subject: [Paraview] paraview web issue Message-ID: <54736AF9.6070008@gmail.com> Hi All, Making an attempt to install ParaView web. I need some assistance in trouble shooting. I am attaching a set of logs from a single attempt. I'm following theinstructions for Ubuntu 14.04 . I see the x11 render window open, but the web page shows nothing. from the error log [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] File does not exist: /var/www/ParaView/www/ws: from the access log 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET /ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" 404 513 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" 404 457 Seems that the problem potentially relates to web sockets. How can I get further info about what's failing? Can anyone give some hint on troubleshooting this issue? Burlen -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: apache2_access.log Type: text/x-log Size: 8422 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: apache2_error.log Type: text/x-log Size: 1696 bytes Desc: not available URL: -------------- next part -------------- 2014-11-24 08:48:52-0800 [-] Log opened. 2014-11-24 08:48:52-0800 [-] Site starting on 9100 2014-11-24 08:48:52-0800 [-] Starting factory 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:48:52-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-24 08:53:52-0800 [twisted.web.server.Site] (TCP Port 9100 Closed) 2014-11-24 08:53:52-0800 [twisted.web.server.Site] Stopping factory 2014-11-24 08:53:52-0800 [-] Main loop terminated. -------------- next part -------------- A non-text attachment was scrubbed... Name: launcherLog.log Type: text/x-log Size: 810 bytes Desc: not available URL: From wascott at sandia.gov Mon Nov 24 12:47:53 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Mon, 24 Nov 2014 17:47:53 +0000 Subject: [Paraview] [EXTERNAL] factor in axis label for cube axes In-Reply-To: <5473497E.9030902@gmail.com> References: <5473497E.9030902@gmail.com> Message-ID: <79786f7357c447e98b25c746dff36975@ES05AMSNLNT.srn.sandia.gov> Mikhail, I added this feature to bug number http://www.paraview.org/Bug/view.php?id=13148. Alan -----Original Message----- From: ParaView [mailto:paraview-bounces at paraview.org] On Behalf Of Mikhail Artemyev Sent: Monday, November 24, 2014 8:07 AM To: ParaView Subject: [EXTERNAL] [Paraview] factor in axis label for cube axes Dear all, How can I change the factor in the axis label? For example, if the x-coordinate is from 0 to 2000 (see the attached picture), the axis label is "X-Axis (x10^3)", and the values on the axis are from 0.0 to 2.0. If I change the x-axis label it affects the name only, the factor stays the same. I would like to make the coordinates be shown in the original scale: 0 to 2000, without the factor in brackets. Thank you, Mikhail From sebastien.jourdain at kitware.com Mon Nov 24 13:02:43 2014 From: sebastien.jourdain at kitware.com (Sebastien Jourdain) Date: Mon, 24 Nov 2014 11:02:43 -0700 Subject: [Paraview] paraview web issue In-Reply-To: <54736AF9.6070008@gmail.com> References: <54736AF9.6070008@gmail.com> Message-ID: Hi Burlen, Just to make sure, you are performing the install on an Ubuntu 14.04 ? Are you trying to try it locally first using "localhost", or are you targeting a real deploy with a real host name? Can you share your config file for the launcher + apache? (You can do it privately depending on your target deploy / security) Moreover, can you validate that the session id c3079f24-73f9-11e4-a023-002590202132 was properly mapped inside the text file that is shared between Apache and the Python launcher? Thanks, Seb On Mon, Nov 24, 2014 at 10:29 AM, burlen wrote: > Hi All, > > Making an attempt to install ParaView web. I need some assistance in > trouble shooting. I am attaching a set of logs from a single attempt. I'm > following the instructions for Ubuntu 14.04 > . > I see the x11 render window open, but the web page shows nothing. > > from the error log > [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] File does not > exist: /var/www/ParaView/www/ws: > > from the access log > 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET / > ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 > HTTP/1.1" 404 513 > 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET > /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" 404 457 > > Seems that the problem potentially relates to web sockets. How can I get > further info about what's failing? Can anyone give some hint on > troubleshooting this issue? > > Burlen > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bloring at lbl.gov Mon Nov 24 14:47:26 2014 From: bloring at lbl.gov (Burlen Loring) Date: Mon, 24 Nov 2014 11:47:26 -0800 Subject: [Paraview] paraview web issue In-Reply-To: References: <54736AF9.6070008@gmail.com> Message-ID: <54738B4E.4000902@lbl.gov> Hi Sebastien, this is for a public deployment but I am testing in the browser while it locally logged into the system. This server is running ubuntu 11.04, apache 2.2.22. I hope that this isn't a roadblock.I can't easily upgrade. your instructions for 14.04 went off OK but in 2 spots I had to find a work around: 1) proxy_wstunnel had to be installed manually, this went without a hitch and it loaded up without error 2) in the apache config I had to comment #Require all granted as that wasn't valid in 2.2 the session id was in the proxy.txt file and had the port number 9100 which I see elsewhere in the logs, so that looks OK. I'm attaching the launcher config. the apache config is pasted below. 131 ################################################################################333 132 133 ServerName paraview.lbl.gov 134 ServerAdmin bloring at lbl.gov 135 DocumentRoot /var/www/ParaView/www 136 ErrorLog "/var/www/ParaView/logs/error.log" 137 CustomLog "/var/www/ParaView/logs/access.log" common 138 139 140 Options Indexes FollowSymLinks 141 Order allow,deny 142 Allow from all 143 AllowOverride None 144 #for ver >= 2.4 145 #Require all granted 146 147 148 # Handle launcher forwarding 149 ProxyPass /paraview http://localhost:8080/paraview 150 151 # Handle WebSocket forwarding 152 RewriteEngine On 153 RewriteMap session-to-port txt:/var/www/ParaView/proxy.txt 154 RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] 155 RewriteRule ^/proxy.*$ ws://${session-to-port:%1}/ws [P] 156 On 11/24/2014 10:02 AM, Sebastien Jourdain wrote: > Hi Burlen, > > Just to make sure, you are performing the install on an Ubuntu 14.04 ? > > Are you trying to try it locally first using "localhost", or are you > targeting a real deploy with a real host name? > > Can you share your config file for the launcher + apache? > (You can do it privately depending on your target deploy / security) > > Moreover, can you validate that the session id > c3079f24-73f9-11e4-a023-002590202132 was properly mapped inside the > text file that is shared between Apache and the Python launcher? > > Thanks, > > Seb > > > > On Mon, Nov 24, 2014 at 10:29 AM, burlen > wrote: > > Hi All, > > Making an attempt to install ParaView web. I need some assistance > in trouble shooting. I am attaching a set of logs from a single > attempt. I'm following theinstructions for Ubuntu 14.04 > . > I see the x11 render window open, but the web page shows nothing. > > from the error log > [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] File > does not exist: /var/www/ParaView/www/ws: > > from the access log > 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET > /ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 > HTTP/1.1" 404 513 > 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET > /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" > 404 457 > > Seems that the problem potentially relates to web sockets. How can > I get further info about what's failing? Can anyone give some hint > on troubleshooting this issue? > > Burlen > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: launcher.json Type: application/json Size: 2034 bytes Desc: not available URL: From sebastien.jourdain at kitware.com Mon Nov 24 15:48:54 2014 From: sebastien.jourdain at kitware.com (Sebastien Jourdain) Date: Mon, 24 Nov 2014 13:48:54 -0700 Subject: [Paraview] paraview web issue In-Reply-To: <54738B4E.4000902@lbl.gov> References: <54736AF9.6070008@gmail.com> <54738B4E.4000902@lbl.gov> Message-ID: Apache 2.2 will probably be an issue as WS forwarding was not properly supported with url rewrite. You may need to build Apache yourself on that distribution. The one that have all the fix and is supposed to work is 2.4.7+. We have some additional documentation about that part here: http://www.paraview.org/ParaView3/Doc/Nightly/www/js-doc/index.html#!/guide/apache_front_end Seb On Mon, Nov 24, 2014 at 12:47 PM, Burlen Loring wrote: > Hi Sebastien, > > this is for a public deployment but I am testing in the browser while it > locally logged into the system. This server is running ubuntu 11.04, apache > 2.2.22. I hope that this isn't a roadblock.I can't easily upgrade. > > your instructions for 14.04 went off OK but in 2 spots I had to find a > work around: > 1) proxy_wstunnel had to be installed manually, this went without a hitch > and it loaded up without error > 2) in the apache config I had to comment #Require all granted as that > wasn't valid in 2.2 > > the session id was in the proxy.txt file and had the port number 9100 > which I see elsewhere in the logs, so that looks OK. > > I'm attaching the launcher config. > > the apache config is pasted below. > > 131 > ################################################################################333 > 132 > 133 ServerName paraview.lbl.gov > 134 ServerAdmin bloring at lbl.gov > 135 DocumentRoot /var/www/ParaView/www > 136 ErrorLog "/var/www/ParaView/logs/error.log" > 137 CustomLog "/var/www/ParaView/logs/access.log" common > 138 > 139 > 140 Options Indexes FollowSymLinks > 141 Order allow,deny > 142 Allow from all > 143 AllowOverride None > 144 #for ver >= 2.4 > 145 #Require all granted > 146 > 147 > 148 # Handle launcher forwarding > 149 ProxyPass /paraview http://localhost:8080/paraview > 150 > 151 # Handle WebSocket forwarding > 152 RewriteEngine On > 153 RewriteMap session-to-port txt:/var/www/ParaView/proxy.txt > 154 RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] > 155 RewriteRule ^/proxy.*$ ws://${session-to-port:%1}/ws [P] > 156 > > > On 11/24/2014 10:02 AM, Sebastien Jourdain wrote: > > Hi Burlen, > > Just to make sure, you are performing the install on an Ubuntu 14.04 ? > > Are you trying to try it locally first using "localhost", or are you > targeting a real deploy with a real host name? > > Can you share your config file for the launcher + apache? > (You can do it privately depending on your target deploy / security) > > Moreover, can you validate that the session id c3079f24-73f9-11e4-a023-002590202132 > was properly mapped inside the text file that is shared between Apache and > the Python launcher? > > Thanks, > > Seb > > > > On Mon, Nov 24, 2014 at 10:29 AM, burlen wrote: > >> Hi All, >> >> Making an attempt to install ParaView web. I need some assistance in >> trouble shooting. I am attaching a set of logs from a single attempt. I'm >> following the instructions for Ubuntu 14.04 >> . >> I see the x11 render window open, but the web page shows nothing. >> >> from the error log >> [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] File does not >> exist: /var/www/ParaView/www/ws: >> >> from the access log >> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET / >> ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 >> HTTP/1.1" 404 513 >> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >> /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" 404 457 >> >> Seems that the problem potentially relates to web sockets. How can I get >> further info about what's failing? Can anyone give some hint on >> troubleshooting this issue? >> >> Burlen >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe:http://public.kitware.com/mailman/listinfo/paraview > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From w.hunter7 at gmail.com Mon Nov 24 18:08:30 2014 From: w.hunter7 at gmail.com (w.hunter) Date: Mon, 24 Nov 2014 23:08:30 +0000 Subject: [Paraview] ParaView 4.1.0 with non-system (conda) python Message-ID: I'm building ParaView 4.1.0 on SL 7.0 (using build script provided with OpenFOAM-2.3.0). I'd like to use python from my miniconda installation at /home/username/miniconda. CMake finds this correctly and in CMakeCache.txt I have: PARAVIEW_ENABLE_PYTHON:BOOL=ON PYTHON_EXECUTABLE:FILEPATH=/home/username/miniconda/bin/python PYTHON_INCLUDE_DIR:PATH=/home/username/miniconda/include/python2.7 PYTHON_LIBRARY:FILEPATH=/home/username/miniconda/lib/libpython2.7.so.1.0 PYTHON_UTIL_LIBRARY:FILEPATH=/usr/lib64/libutil.so but pvpython and the Python Shell in ParaView use the system python from /usr/bin/ This is a problem because matplotlib isn't installed for the system python. I prefer to manage python packages in my miniconda installation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From furutaka.kazuyoshi at jaea.go.jp Mon Nov 24 19:09:37 2014 From: furutaka.kazuyoshi at jaea.go.jp (Kazuyoshi Furutaka) Date: Tue, 25 Nov 2014 09:09:37 +0900 (JST) Subject: [Paraview] thousands separators in "Annotate Time"? In-Reply-To: References: <20141121.132457.20618009.furutaka.kazuyoshi@jaea.go.jp> Message-ID: <20141125.090937.15473669.furutaka.kazuyoshi@jaea.go.jp> Dear Sebastien, Thanks, works perfect! Kazuyoshi From: Sebastien Jourdain Subject: Re: [Paraview] thousands separators in "Annotate Time"? Date: Fri, 21 Nov 2014 08:52:03 -0700 > You can use the PythonAnnotation filter instead with the following > expression > > "{:,}".format(t_value) > > On Thu, Nov 20, 2014 at 9:24 PM, Kazuyoshi Furutaka < > furutaka.kazuyoshi at jaea.go.jp> wrote: > >> Dear experts, >> >> A simple question; how can I display thousands separators >> using the "Annotate Time" source? >> >> Thanks in advance, >> Kazuyoshi >> -- >> Kazuyoshi Furutaka >> furutaka _dot_ kazuyoshi _at_ jaea _dot_ go _dot_ jp >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> From cook47 at llnl.gov Mon Nov 24 19:25:15 2014 From: cook47 at llnl.gov (Cook, Rich) Date: Tue, 25 Nov 2014 00:25:15 +0000 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) Message-ID: Hi, I have recently compiled paraview 4.2.0 on our clusters in the same way I compile with 4.1.0 and am getting some errors. I run pvserver in parallel, and it does not give any weird outputs. I connect with it from my desktop (Mac OS X). I can see in the desktop GUI that four remote servers are connected. I open up a PDB dataset and it is different. I see two ?Output? objects in the pipeline browser. This is different than the behavior in 4.1.0. [cid:914AC27C-18D5-42AC-95B6-7668C8B7059B at llnl.gov] I click Apply and get smacked in the face with an error dialog. ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, line 68 vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. Checked /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry and /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, line 382 vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no Stream set. ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, line 710 vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but is not optional. I?m unable to color by process scalar ID, or more precisely, the Filter seems to get applied but the color does not change. Appears all work is done on process 0. Something is vewwwy scwewwy. Help? -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Voila_Capture 2014-11-24_04-23-27_PM.png Type: image/png Size: 22058 bytes Desc: Voila_Capture 2014-11-24_04-23-27_PM.png URL: From wascott at sandia.gov Mon Nov 24 21:24:23 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Tue, 25 Nov 2014 02:24:23 +0000 Subject: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing In-Reply-To: References: <54522E18.7000700@gmail.com> <995d5188886344f4a72e423862a9434c@ES05AMSNLNT.srn.sandia.gov> <546B440A.5030204@gmail.com> <546E0CAF.60803@gmail.com> <43d67f57c1394d85a195f8791ccbe154@ES05AMSNLNT.srn.sandia.gov> Message-ID: <342de00c468a4a88a537e35504fff199@ES05AMSNLNT.srn.sandia.gov> Excellent, it has been fixed. I will close the bug. Alan -----Original Message----- From: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com] Sent: Saturday, November 22, 2014 12:38 PM To: Scott, W Alan Cc: Armin Wehrfritz; paraview at paraview.org Subject: Re: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend disappearing Looks like this may already be fixed too. I could not reproduce it with v4.2.0-133-g7e996c8. Alan, can you test with git/master to see if you can reproduce it as you could with 4.2? Thanks, Utkarsh On Thu, Nov 20, 2014 at 3:57 PM, Scott, W Alan wrote: > Perfect!! > > I have replicated this bug, and repeated it a few time. Breaks every time. Thanks Armin for writing it up!! I just targeted PV 4.3, out next month for the fix. > > Bug number http://www.paraview.org/Bug/view.php?id=15143 > > Alan > > -----Original Message----- > From: Armin Wehrfritz [mailto:dkxls23 at gmail.com] > Sent: Thursday, November 20, 2014 8:46 AM > To: Utkarsh Ayachit > Cc: Scott, W Alan; paraview at paraview.org > Subject: Re: [Paraview] [EXTERNAL] Re: PV 4.2.0 Color legend > disappearing > > I actually realized that the state files I provided used a rather large dataset that I didn't provide. > > However, I actually have been able to reproduce the bug now consistently when using an explicit server/client setup. > > Here the steps to trigger the disappearance to the color legend: > 1) run pvserver (e.g. on the local machine) > 2) Connect to pvserver > 3) Add a source (e.g. cylinder or sphere) > 4) Change the displayed quantities, i.e. the color array, about 5-10 times. Usually I can display each color array at least one time, but when switching several times between them the legend disappears. > > As said, without using an explicit connection to pvserver I cannot trigger this bug. > > I attached again two state files, this time using the cylinder source only. > > Thanks for taking care of this! > > -Armin > > > My workstation: > openSUSE 13.1 > ParaView 4.2.0 > Intel Core i7-4800QM QC > NVIDIA Quadro K2100M > > > > > > > > > > > > On 11/20/2014 04:33 PM, Utkarsh Ayachit wrote: >> Great! Thanks, Armin. I'll give it a try once I get back home from my >> travel and see if I can reproduce the issue and track it down. >> >> Utkarsh >> >> On Tue, Nov 18, 2014 at 7:05 AM, Armin Wehrfritz >> wrote: >>> OK, I'm still not yet able to reproduce this bug, but at least I was >>> able to write out some state files. >>> >>> As mentioned before, I only see this happening in a client/server >>> mode, i.e. running pvserver on a remote machine. >>> >>> Three state files are attached, simply visualizing 2D cut-plane >>> data: 1. colorLegBug_OK.pvsm: Everything is still working fine and >>> color legend appears as expected. 2. colorLegBug_Fail_0.pvsm: >>> Switched the color array (from 'Z' to 'SourcePV') -> color legend >>> disappears for 'SourcePV', but still is present when switching back >>> to 'Z' 3. colorLegBug_Fail_1.pvsm: After some more switching of >>> color arrays, the color legend disappears for all quantities. >>> >>> Hope this gives some clues to track down this bug. >>> >>> Thanks, Armin >>> >>> >>> >>> >>> >>> On 10/31/2014 01:34 AM, Scott, W Alan wrote: >>>> >>>> Yep, that's the bug. I have seen it local server. Anyone else >>>> have any ideas how to replicate it? If anyone does see it, mind >>>> writing a state file and sending to me? It's a long shot, but >>>> maybe that will help us figure out what is going on. >>>> >>>> Thanks, >>>> >>>> Alan >>>> >>>> -----Original Message----- From: Armin Wehrfritz >>>> [mailto:dkxls23 at gmail.com] Sent: Thursday, October 30, 2014 6:25 AM >>>> To: Scott, W Alan; paraview at paraview.org Subject: [EXTERNAL] >>>> Re: [Paraview] PV 4.2.0 Color legend disappearing >>>> >>>> I have experienced it too, but cannot reproduce it! >>>> >>>> For me it happened so far only in a client-server setup. When I >>>> grab the surface (HDF5/XDMF files; 2D unstructured cells) and >>>> rotate or move it, the legend comes back, but will disappear as >>>> soon as I release the surface again. When copying the very same >>>> data to my local machine and visualizing it in a local ParaView >>>> session, everything works fine. >>>> >>>> Very odd indeed! >>>> >>>> My workstation: openSUSE 13.1 ParaView 4.2.0 Intel Core i7-4800QM >>>> QC Processor NVIDIA Quadro K2100M Graphics Card >>>> >>>> -Armin >>>> >>>> >>>> >>>> On 10/30/2014 01:26 AM, Scott, W Alan wrote: >>>>> >>>>> In ParaView 4.2.0, I have found a few cases where the color legend >>>>> disappears, and I can't get it back. Has anyone else seen this, >>>>> and found a way to replicate it? Mind passing the voodoo on how >>>>> to replicate this bug? Thanks, Alan >>>>> >>>>> >>>>> _______________________________________________ Powered by >>>>> www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>> >>> >>> _______________________________________________ Powered by >>> www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> From berk.geveci at kitware.com Tue Nov 25 09:06:18 2014 From: berk.geveci at kitware.com (Berk Geveci) Date: Tue, 25 Nov 2014 09:06:18 -0500 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) In-Reply-To: References: Message-ID: Hey Rich, Can you send me the dataset? Best, -berk On Mon, Nov 24, 2014 at 7:25 PM, Cook, Rich wrote: > Hi, > I have recently compiled paraview 4.2.0 on our clusters in the same way I > compile with 4.1.0 and am getting some errors. > I run pvserver in parallel, and it does not give any weird outputs. > I connect with it from my desktop (Mac OS X). I can see in the desktop > GUI that four remote servers are connected. > I open up a PDB dataset and it is different. I see two ?Output? objects > in the pipeline browser. This is different than the behavior in 4.1.0. > > > I click Apply and get smacked in the face with an error dialog. > > ERROR: In > /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, > line 68 > vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. > Checked > /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry > and > /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry > > > ERROR: In > /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, > line 382 > vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no Stream > set. > > > ERROR: In > /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, > line 710 > vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of > algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but > is not optional. > > > I?m unable to color by process scalar ID, or more precisely, the Filter > seems to get applied but the color does not change. Appears all work is > done on process 0. > > Something is vewwwy scwewwy. > > Help? > > > -- > ?Richard Cook > ? Lawrence Livermore National Laboratory > Bldg-453 Rm-4024, Mail Stop L-557 > 7000 East Avenue, Livermore, CA, 94550, USA > ? (office) (925) 423-9605 > ? (fax) (925) 423-6961 > --- > Information Management & Graphics Grp., Services & Development Div., > Integrated Computing & Communications Dept. > (opinions expressed herein are mine and not those of LLNL) > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Voila_Capture 2014-11-24_04-23-27_PM.png Type: image/png Size: 22058 bytes Desc: not available URL: From marcus.hanwell at kitware.com Tue Nov 25 09:44:57 2014 From: marcus.hanwell at kitware.com (Marcus D. Hanwell) Date: Tue, 25 Nov 2014 09:44:57 -0500 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) In-Reply-To: References: Message-ID: Hi, I think I know the cause, the PDB reader was modified to produce a vtkMolecule in addition to the vtkPolyData I think it has always produced. It looks like there is a packaging issue, and the XML file cannot be found. We should probably just statically compile the file in, or convert it to a header as the data is pretty static - atomic radii, colors, etc. Marcus On Tue, Nov 25, 2014 at 9:06 AM, Berk Geveci wrote: > Hey Rich, > > Can you send me the dataset? > > Best, > -berk > > On Mon, Nov 24, 2014 at 7:25 PM, Cook, Rich wrote: > >> Hi, >> I have recently compiled paraview 4.2.0 on our clusters in the same way I >> compile with 4.1.0 and am getting some errors. >> I run pvserver in parallel, and it does not give any weird outputs. >> I connect with it from my desktop (Mac OS X). I can see in the desktop >> GUI that four remote servers are connected. >> I open up a PDB dataset and it is different. I see two ?Output? objects >> in the pipeline browser. This is different than the behavior in 4.1.0. >> >> >> I click Apply and get smacked in the face with an error dialog. >> >> ERROR: In >> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, >> line 68 >> vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. >> Checked >> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry >> and >> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry >> >> >> ERROR: In >> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, >> line 382 >> vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no Stream >> set. >> >> >> ERROR: In >> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >> line 710 >> vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of >> algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but >> is not optional. >> >> >> I?m unable to color by process scalar ID, or more precisely, the >> Filter seems to get applied but the color does not change. Appears all >> work is done on process 0. >> >> Something is vewwwy scwewwy. >> >> Help? >> >> >> -- >> ?Richard Cook >> ? Lawrence Livermore National Laboratory >> Bldg-453 Rm-4024, Mail Stop L-557 >> 7000 East Avenue, Livermore, CA, 94550, USA >> ? (office) (925) 423-9605 >> ? (fax) (925) 423-6961 >> --- >> Information Management & Graphics Grp., Services & Development Div., >> Integrated Computing & Communications Dept. >> (opinions expressed herein are mine and not those of LLNL) >> >> >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Voila_Capture 2014-11-24_04-23-27_PM.png Type: image/png Size: 22058 bytes Desc: not available URL: From cook47 at llnl.gov Tue Nov 25 13:16:17 2014 From: cook47 at llnl.gov (Cook, Rich) Date: Tue, 25 Nov 2014 18:16:17 +0000 Subject: [Paraview] Which reader run in parallel? All of them? Message-ID: Hello Paraview Overlords, Does every paraview reader run in parallel with its data? I know that is not the case with VisIt, so I?m thinking probably not true for paraview either. If not, is there a list of which readers parallelize and which are not, or a way to compile such a list without reading the source code? Thanks! -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -------------- next part -------------- An HTML attachment was scrubbed... URL: From kmorel at sandia.gov Tue Nov 25 14:16:00 2014 From: kmorel at sandia.gov (Moreland, Kenneth) Date: Tue, 25 Nov 2014 19:16:00 +0000 Subject: [Paraview] Which reader run in parallel? All of them? Message-ID: Like VisIt, there exist readers in ParaView that do not perform well or at all when reading data in parallel. There are practical reasons for allowing non-parallel readers to exist within ParaView (and VisIt). The underling architecture is modular and designed to make it straightforward to add components like readers. Thus, the reader implementation often happens outside of ParaView development and is not necessarily designed for parallel usage. It is also the case that many file formats are not very amenable for parallel reading, but there are still good use cases for supporting them in some way in ParaView. As far as I know, there is no list of what readers do or do not read in parallel. I suppose it would be possible to iterate over all readers and see which ones report pieces or extents, but that would not give reliable information about parallel behavior or the limitations. It would be hard to quantify the parallel behavior of the readers in any meaningful way. A list of parallel readers may not be the right way to ask the question. A better question to ask is if I have data in a particular format can I read that in parallel? Yes, this is most reliably answered by pouring through the source code, but an email to this list will probably provide a satisfactory answer if its a common format. The converse question is for data of a given type, what is the best file format to use for parallel performance? You're bound to get a more complete answer by asking humans than consulting a list. -Evil ParaView Overlord #42 From: , Rich > Date: Tuesday, November 25, 2014 at 11:16 AM To: "paraview at paraview.org" > Subject: [EXTERNAL] [Paraview] Which reader run in parallel? All of them? Hello Paraview Overlords, Does every paraview reader run in parallel with its data? I know that is not the case with VisIt, so I?m thinking probably not true for paraview either. If not, is there a list of which readers parallelize and which are not, or a way to compile such a list without reading the source code? Thanks! -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -------------- next part -------------- An HTML attachment was scrubbed... URL: From cook47 at llnl.gov Tue Nov 25 14:28:10 2014 From: cook47 at llnl.gov (Cook, Rich) Date: Tue, 25 Nov 2014 19:28:10 +0000 Subject: [Paraview] Which reader run in parallel? All of them? In-Reply-To: References: Message-ID: Hi, Ken, your approach makes sense, unless you are in my shoes of maintaining the software for use by others. In that case, users come to me asking which package they should use to view their data and the ability to view in parallel is an important consideration which I?d like to have at my fingertips. So far it?s not so frequent, but quantifying it in some way would help me at least as a central maintenance and support guy. But it seems I will have to take your approach, querying piecemeal as needed. Thanks ? Rich On Nov 25, 2014, at 11:16 AM, Moreland, Kenneth > wrote: Like VisIt, there exist readers in ParaView that do not perform well or at all when reading data in parallel. There are practical reasons for allowing non-parallel readers to exist within ParaView (and VisIt). The underling architecture is modular and designed to make it straightforward to add components like readers. Thus, the reader implementation often happens outside of ParaView development and is not necessarily designed for parallel usage. It is also the case that many file formats are not very amenable for parallel reading, but there are still good use cases for supporting them in some way in ParaView. As far as I know, there is no list of what readers do or do not read in parallel. I suppose it would be possible to iterate over all readers and see which ones report pieces or extents, but that would not give reliable information about parallel behavior or the limitations. It would be hard to quantify the parallel behavior of the readers in any meaningful way. A list of parallel readers may not be the right way to ask the question. A better question to ask is if I have data in a particular format can I read that in parallel? Yes, this is most reliably answered by pouring through the source code, but an email to this list will probably provide a satisfactory answer if its a common format. The converse question is for data of a given type, what is the best file format to use for parallel performance? You're bound to get a more complete answer by asking humans than consulting a list. -Evil ParaView Overlord #42 From: , Rich > Date: Tuesday, November 25, 2014 at 11:16 AM To: "paraview at paraview.org" > Subject: [EXTERNAL] [Paraview] Which reader run in parallel? All of them? Hello Paraview Overlords, Does every paraview reader run in parallel with its data? I know that is not the case with VisIt, so I?m thinking probably not true for paraview either. If not, is there a list of which readers parallelize and which are not, or a way to compile such a list without reading the source code? Thanks! -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -------------- next part -------------- An HTML attachment was scrubbed... URL: From berk.geveci at kitware.com Tue Nov 25 15:55:34 2014 From: berk.geveci at kitware.com (Berk Geveci) Date: Tue, 25 Nov 2014 15:55:34 -0500 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) In-Reply-To: References: Message-ID: Marcus will investigate the errors. They are not related to why the dataset is no longer distributed. There was code in 4.1 that automatically redistributed data from serial readers using a very naive approach. That code is no longer there. We are investigating various options of improving on the 4.1 functionality. I would normally say that you can use the D3 filter to distribute the data but I was cautious and tried it first. It crashes :-( This dataset has string arrays in it, which it seems D3 does not handle. Do you have a particular use case driving parallel PDB capability? If you do, I can find some workarounds of these issues. If not, D3 should nicely work on most polydata and unstructured grid sources. We are working on better ways of redistributing the other data types. Best, -berk On Tue, Nov 25, 2014 at 9:44 AM, Marcus D. Hanwell < marcus.hanwell at kitware.com> wrote: > Hi, > > I think I know the cause, the PDB reader was modified to produce a > vtkMolecule in addition to the vtkPolyData I think it has always produced. > It looks like there is a packaging issue, and the XML file cannot be found. > We should probably just statically compile the file in, or convert it to a > header as the data is pretty static - atomic radii, colors, etc. > > Marcus > > > On Tue, Nov 25, 2014 at 9:06 AM, Berk Geveci > wrote: > >> Hey Rich, >> >> Can you send me the dataset? >> >> Best, >> -berk >> >> On Mon, Nov 24, 2014 at 7:25 PM, Cook, Rich wrote: >> >>> Hi, >>> I have recently compiled paraview 4.2.0 on our clusters in the same way >>> I compile with 4.1.0 and am getting some errors. >>> I run pvserver in parallel, and it does not give any weird outputs. >>> I connect with it from my desktop (Mac OS X). I can see in the desktop >>> GUI that four remote servers are connected. >>> I open up a PDB dataset and it is different. I see two ?Output? objects >>> in the pipeline browser. This is different than the behavior in 4.1.0. >>> >>> >>> I click Apply and get smacked in the face with an error dialog. >>> >>> ERROR: In >>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, >>> line 68 >>> vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. >>> Checked >>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry >>> and >>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry >>> >>> >>> ERROR: In >>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, >>> line 382 >>> vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no Stream >>> set. >>> >>> >>> ERROR: In >>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>> line 710 >>> vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of >>> algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but >>> is not optional. >>> >>> >>> I?m unable to color by process scalar ID, or more precisely, the >>> Filter seems to get applied but the color does not change. Appears all >>> work is done on process 0. >>> >>> Something is vewwwy scwewwy. >>> >>> Help? >>> >>> >>> -- >>> ?Richard Cook >>> ? Lawrence Livermore National Laboratory >>> Bldg-453 Rm-4024, Mail Stop L-557 >>> 7000 East Avenue, Livermore, CA, 94550, USA >>> ? (office) (925) 423-9605 >>> ? (fax) (925) 423-6961 >>> --- >>> Information Management & Graphics Grp., Services & Development Div., >>> Integrated Computing & Communications Dept. >>> (opinions expressed herein are mine and not those of LLNL) >>> >>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Voila_Capture 2014-11-24_04-23-27_PM.png Type: image/png Size: 22058 bytes Desc: not available URL: From cook47 at llnl.gov Tue Nov 25 17:15:59 2014 From: cook47 at llnl.gov (Cook, Rich) Date: Tue, 25 Nov 2014 22:15:59 +0000 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) In-Reply-To: References: Message-ID: I do not have an urgent need to view this data. However, be advised that I got it from what appears to be the PDB canonical source, so I assumed our molecular people would appreciate being able to visualize their stuff. This kind of model doesn?t usually get that big, though, probably. http://www.rcsb.org/pdb/explore.do?structureId=1lmb Thank you kindly. No workaround is needed. ? Rich On Nov 25, 2014, at 12:55 PM, Berk Geveci > wrote: Marcus will investigate the errors. They are not related to why the dataset is no longer distributed. There was code in 4.1 that automatically redistributed data from serial readers using a very naive approach. That code is no longer there. We are investigating various options of improving on the 4.1 functionality. I would normally say that you can use the D3 filter to distribute the data but I was cautious and tried it first. It crashes :-( This dataset has string arrays in it, which it seems D3 does not handle. Do you have a particular use case driving parallel PDB capability? If you do, I can find some workarounds of these issues. If not, D3 should nicely work on most polydata and unstructured grid sources. We are working on better ways of redistributing the other data types. Best, -berk On Tue, Nov 25, 2014 at 9:44 AM, Marcus D. Hanwell > wrote: Hi, I think I know the cause, the PDB reader was modified to produce a vtkMolecule in addition to the vtkPolyData I think it has always produced. It looks like there is a packaging issue, and the XML file cannot be found. We should probably just statically compile the file in, or convert it to a header as the data is pretty static - atomic radii, colors, etc. Marcus On Tue, Nov 25, 2014 at 9:06 AM, Berk Geveci > wrote: Hey Rich, Can you send me the dataset? Best, -berk On Mon, Nov 24, 2014 at 7:25 PM, Cook, Rich > wrote: Hi, I have recently compiled paraview 4.2.0 on our clusters in the same way I compile with 4.1.0 and am getting some errors. I run pvserver in parallel, and it does not give any weird outputs. I connect with it from my desktop (Mac OS X). I can see in the desktop GUI that four remote servers are connected. I open up a PDB dataset and it is different. I see two ?Output? objects in the pipeline browser. This is different than the behavior in 4.1.0. I click Apply and get smacked in the face with an error dialog. ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, line 68 vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. Checked /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry and /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, line 382 vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no Stream set. ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, line 710 vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but is not optional. I?m unable to color by process scalar ID, or more precisely, the Filter seems to get applied but the color does not change. Appears all work is done on process 0. Something is vewwwy scwewwy. Help? -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -------------- next part -------------- An HTML attachment was scrubbed... URL: From bloring at lbl.gov Tue Nov 25 19:00:09 2014 From: bloring at lbl.gov (Burlen Loring) Date: Tue, 25 Nov 2014 16:00:09 -0800 Subject: [Paraview] paraview web issue In-Reply-To: References: <54736AF9.6070008@gmail.com> <54738B4E.4000902@lbl.gov> Message-ID: <54751809.6090004@lbl.gov> Hi Sebastien, OK, I finally upgrade to Ubuntu 14.04 and apache 2.4! however, I still have some issue. again I see the render window pop up in the background, in the browser I have the ParaView web logo and spinning wheel, now after a few seconds a dialog: Session did not start before timeout expired. Check session logs. I cranked up the log verbosity in apache. attached everything. Any idea what the problem is? how to get more info? paraview has an error, how does that get reported? Thanks Burlen On 11/24/2014 12:48 PM, Sebastien Jourdain wrote: > Apache 2.2 will probably be an issue as WS forwarding was not properly > supported with url rewrite. > > You may need to build Apache yourself on that distribution. The one > that have all the fix and is supposed to work is 2.4.7+. > > We have some additional documentation about that part here: > > http://www.paraview.org/ParaView3/Doc/Nightly/www/js-doc/index.html#!/guide/apache_front_end > > > Seb > > On Mon, Nov 24, 2014 at 12:47 PM, Burlen Loring > wrote: > > Hi Sebastien, > > this is for a public deployment but I am testing in the browser > while it locally logged into the system. This server is running > ubuntu 11.04, apache 2.2.22. I hope that this isn't a roadblock.I > can't easily upgrade. > > your instructions for 14.04 went off OK but in 2 spots I had to > find a work around: > 1) proxy_wstunnel had to be installed manually, this went without > a hitch and it loaded up without error > 2) in the apache config I had to comment #Require all granted as > that wasn't valid in 2.2 > > the session id was in the proxy.txt file and had the port number > 9100 which I see elsewhere in the logs, so that looks OK. > > I'm attaching the launcher config. > > the apache config is pasted below. > > 131 > ################################################################################333 > 132 > 133 ServerName paraview.lbl.gov > 134 ServerAdmin bloring at lbl.gov > 135 DocumentRoot /var/www/ParaView/www > 136 ErrorLog "/var/www/ParaView/logs/error.log" > 137 CustomLog "/var/www/ParaView/logs/access.log" common > 138 > 139 > 140 Options Indexes FollowSymLinks > 141 Order allow,deny > 142 Allow from all > 143 AllowOverride None > 144 #for ver >= 2.4 > 145 #Require all granted > 146 > 147 > 148 # Handle launcher forwarding > 149 ProxyPass /paraview http://localhost:8080/paraview > 150 > 151 # Handle WebSocket forwarding > 152 RewriteEngine On > 153 RewriteMap session-to-port txt:/var/www/ParaView/proxy.txt > 154 RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] > 155 RewriteRule ^/proxy.*$ ws://${session-to-port:%1}/ws [P] > 156 > > > On 11/24/2014 10:02 AM, Sebastien Jourdain wrote: >> Hi Burlen, >> >> Just to make sure, you are performing the install on an Ubuntu >> 14.04 ? >> >> Are you trying to try it locally first using "localhost", or are >> you targeting a real deploy with a real host name? >> >> Can you share your config file for the launcher + apache? >> (You can do it privately depending on your target deploy / security) >> >> Moreover, can you validate that the session id >> c3079f24-73f9-11e4-a023-002590202132 was properly mapped inside >> the text file that is shared between Apache and the Python launcher? >> >> Thanks, >> >> Seb >> >> >> >> On Mon, Nov 24, 2014 at 10:29 AM, burlen > > wrote: >> >> Hi All, >> >> Making an attempt to install ParaView web. I need some >> assistance in trouble shooting. I am attaching a set of logs >> from a single attempt. I'm following theinstructions for >> Ubuntu 14.04 >> . >> I see the x11 render window open, but the web page shows nothing. >> >> from the error log >> [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] >> File does not exist: /var/www/ParaView/www/ws: >> >> from the access log >> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >> /ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 >> HTTP/1.1" 404 513 >> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >> /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 >> HTTP/1.1" 404 457 >> >> Seems that the problem potentially relates to web sockets. >> How can I get further info about what's failing? Can anyone >> give some hint on troubleshooting this issue? >> >> Burlen >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview >> >> >> >> >> _______________________________________________ >> Powered bywww.kitware.com >> >> Visit other Kitware open-source projects athttp://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at:http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: access.log Type: text/x-log Size: 83 bytes Desc: not available URL: -------------- next part -------------- 2014-11-25 15:50:14-0800 [-] Log opened. 2014-11-25 15:50:14-0800 [-] Site starting on 9100 2014-11-25 15:50:14-0800 [-] Starting factory 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:50:14-0800 [-] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2014-11-25 15:55:14-0800 [twisted.web.server.Site] (TCP Port 9100 Closed) 2014-11-25 15:55:14-0800 [twisted.web.server.Site] Stopping factory 2014-11-25 15:55:14-0800 [-] Main loop terminated. -------------- next part -------------- A non-text attachment was scrubbed... Name: error.log Type: text/x-log Size: 1951 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: launcherLog.log Type: text/x-log Size: 404 bytes Desc: not available URL: -------------- next part -------------- cb0e3f70-74fd-11e4-a023-002590202132 localhost:9100 From sebastien.jourdain at kitware.com Tue Nov 25 22:01:53 2014 From: sebastien.jourdain at kitware.com (Sebastien Jourdain) Date: Tue, 25 Nov 2014 20:01:53 -0700 Subject: [Paraview] paraview web issue In-Reply-To: <54751809.6090004@lbl.gov> References: <54736AF9.6070008@gmail.com> <54738B4E.4000902@lbl.gov> <54751809.6090004@lbl.gov> Message-ID: Found the issue! Or at least I think I do ;-) The short answer is that the "ready_line" property inside your launcher.json file should be "Starting factory" and not "Starting factory - XYZ" for all the command lines. (Like written in the documentation ;-) The reason is that the launcher look for that exact String in the output of the process that it runs. This allow to know when the process is ready. And the line "Starting factory - XYZ" never show up, hence the error message "Session did not start before timeout expired. Check session logs." has it think the process is not ready. Let me know if you run into something else. Seb On Tue, Nov 25, 2014 at 5:00 PM, Burlen Loring wrote: > Hi Sebastien, > > OK, I finally upgrade to Ubuntu 14.04 and apache 2.4! however, I still > have some issue. again I see the render window pop up in the background, in > the browser I have the ParaView web logo and spinning wheel, now after a > few seconds a dialog: Session did not start before timeout expired. Check > session logs. > > I cranked up the log verbosity in apache. attached everything. Any idea > what the problem is? how to get more info? paraview has an error, how does > that get reported? > > Thanks > Burlen > > > On 11/24/2014 12:48 PM, Sebastien Jourdain wrote: > > Apache 2.2 will probably be an issue as WS forwarding was not properly > supported with url rewrite. > > You may need to build Apache yourself on that distribution. The one that > have all the fix and is supposed to work is 2.4.7+. > > We have some additional documentation about that part here: > > > http://www.paraview.org/ParaView3/Doc/Nightly/www/js-doc/index.html#!/guide/apache_front_end > > Seb > > On Mon, Nov 24, 2014 at 12:47 PM, Burlen Loring wrote: > >> Hi Sebastien, >> >> this is for a public deployment but I am testing in the browser while it >> locally logged into the system. This server is running ubuntu 11.04, apache >> 2.2.22. I hope that this isn't a roadblock.I can't easily upgrade. >> >> your instructions for 14.04 went off OK but in 2 spots I had to find a >> work around: >> 1) proxy_wstunnel had to be installed manually, this went without a hitch >> and it loaded up without error >> 2) in the apache config I had to comment #Require all granted as that >> wasn't valid in 2.2 >> >> the session id was in the proxy.txt file and had the port number 9100 >> which I see elsewhere in the logs, so that looks OK. >> >> I'm attaching the launcher config. >> >> the apache config is pasted below. >> >> 131 >> ################################################################################333 >> 132 >> 133 ServerName paraview.lbl.gov >> 134 ServerAdmin bloring at lbl.gov >> 135 DocumentRoot /var/www/ParaView/www >> 136 ErrorLog "/var/www/ParaView/logs/error.log" >> 137 CustomLog "/var/www/ParaView/logs/access.log" common >> 138 >> 139 >> 140 Options Indexes FollowSymLinks >> 141 Order allow,deny >> 142 Allow from all >> 143 AllowOverride None >> 144 #for ver >= 2.4 >> 145 #Require all granted >> 146 >> 147 >> 148 # Handle launcher forwarding >> 149 ProxyPass /paraview http://localhost:8080/paraview >> 150 >> 151 # Handle WebSocket forwarding >> 152 RewriteEngine On >> 153 RewriteMap session-to-port txt:/var/www/ParaView/proxy.txt >> 154 RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] >> 155 RewriteRule ^/proxy.*$ ws://${session-to-port:%1}/ws [P] >> 156 >> >> >> On 11/24/2014 10:02 AM, Sebastien Jourdain wrote: >> >> Hi Burlen, >> >> Just to make sure, you are performing the install on an Ubuntu 14.04 ? >> >> Are you trying to try it locally first using "localhost", or are you >> targeting a real deploy with a real host name? >> >> Can you share your config file for the launcher + apache? >> (You can do it privately depending on your target deploy / security) >> >> Moreover, can you validate that the session id c3079f24-73f9-11e4-a023-002590202132 >> was properly mapped inside the text file that is shared between Apache and >> the Python launcher? >> >> Thanks, >> >> Seb >> >> >> >> On Mon, Nov 24, 2014 at 10:29 AM, burlen wrote: >> >>> Hi All, >>> >>> Making an attempt to install ParaView web. I need some assistance in >>> trouble shooting. I am attaching a set of logs from a single attempt. I'm >>> following the instructions for Ubuntu 14.04 >>> . >>> I see the x11 render window open, but the web page shows nothing. >>> >>> from the error log >>> [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] File does not >>> exist: /var/www/ParaView/www/ws: >>> >>> from the access log >>> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET / >>> ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 >>> HTTP/1.1" 404 513 >>> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >>> /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" 404 457 >>> >>> Seems that the problem potentially relates to web sockets. How can I get >>> further info about what's failing? Can anyone give some hint on >>> troubleshooting this issue? >>> >>> Burlen >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe:http://public.kitware.com/mailman/listinfo/paraview >> >> >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sebastien.jourdain at kitware.com Tue Nov 25 22:04:55 2014 From: sebastien.jourdain at kitware.com (Sebastien Jourdain) Date: Tue, 25 Nov 2014 20:04:55 -0700 Subject: [Paraview] paraview web issue In-Reply-To: References: <54736AF9.6070008@gmail.com> <54738B4E.4000902@lbl.gov> <54751809.6090004@lbl.gov> Message-ID: BTW, once you update the configuration file, you will need to restart that launcher process. It is not smart enough to watch that file. ;-) And down the road, if you want to use different machine for the Viz, you can issue some ssh command to remotely start that ParaView process even with mpi/pvserver. Seb On Tue, Nov 25, 2014 at 8:01 PM, Sebastien Jourdain < sebastien.jourdain at kitware.com> wrote: > Found the issue! Or at least I think I do ;-) > > The short answer is that the "ready_line" property inside your > launcher.json file should be "Starting factory" and not "Starting factory - > XYZ" for all the command lines. (Like written in the documentation ;-) > > The reason is that the launcher look for that exact String in the output > of the process that it runs. This allow to know when the process is ready. > And the line "Starting factory - XYZ" never show up, hence the error message > "Session did not start before timeout expired. Check session logs." has it > think the process is not ready. > > Let me know if you run into something else. > > Seb > > > > > On Tue, Nov 25, 2014 at 5:00 PM, Burlen Loring wrote: > >> Hi Sebastien, >> >> OK, I finally upgrade to Ubuntu 14.04 and apache 2.4! however, I still >> have some issue. again I see the render window pop up in the background, in >> the browser I have the ParaView web logo and spinning wheel, now after a >> few seconds a dialog: Session did not start before timeout expired. Check >> session logs. >> >> I cranked up the log verbosity in apache. attached everything. Any idea >> what the problem is? how to get more info? paraview has an error, how does >> that get reported? >> >> Thanks >> Burlen >> >> >> On 11/24/2014 12:48 PM, Sebastien Jourdain wrote: >> >> Apache 2.2 will probably be an issue as WS forwarding was not properly >> supported with url rewrite. >> >> You may need to build Apache yourself on that distribution. The one >> that have all the fix and is supposed to work is 2.4.7+. >> >> We have some additional documentation about that part here: >> >> >> http://www.paraview.org/ParaView3/Doc/Nightly/www/js-doc/index.html#!/guide/apache_front_end >> >> Seb >> >> On Mon, Nov 24, 2014 at 12:47 PM, Burlen Loring wrote: >> >>> Hi Sebastien, >>> >>> this is for a public deployment but I am testing in the browser while it >>> locally logged into the system. This server is running ubuntu 11.04, apache >>> 2.2.22. I hope that this isn't a roadblock.I can't easily upgrade. >>> >>> your instructions for 14.04 went off OK but in 2 spots I had to find a >>> work around: >>> 1) proxy_wstunnel had to be installed manually, this went without a >>> hitch and it loaded up without error >>> 2) in the apache config I had to comment #Require all granted as that >>> wasn't valid in 2.2 >>> >>> the session id was in the proxy.txt file and had the port number 9100 >>> which I see elsewhere in the logs, so that looks OK. >>> >>> I'm attaching the launcher config. >>> >>> the apache config is pasted below. >>> >>> 131 >>> ################################################################################333 >>> 132 >>> 133 ServerName paraview.lbl.gov >>> 134 ServerAdmin bloring at lbl.gov >>> 135 DocumentRoot /var/www/ParaView/www >>> 136 ErrorLog "/var/www/ParaView/logs/error.log" >>> 137 CustomLog "/var/www/ParaView/logs/access.log" common >>> 138 >>> 139 >>> 140 Options Indexes FollowSymLinks >>> 141 Order allow,deny >>> 142 Allow from all >>> 143 AllowOverride None >>> 144 #for ver >= 2.4 >>> 145 #Require all granted >>> 146 >>> 147 >>> 148 # Handle launcher forwarding >>> 149 ProxyPass /paraview http://localhost:8080/paraview >>> 150 >>> 151 # Handle WebSocket forwarding >>> 152 RewriteEngine On >>> 153 RewriteMap session-to-port txt:/var/www/ParaView/proxy.txt >>> 154 RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] >>> 155 RewriteRule ^/proxy.*$ ws://${session-to-port:%1}/ws [P] >>> 156 >>> >>> >>> On 11/24/2014 10:02 AM, Sebastien Jourdain wrote: >>> >>> Hi Burlen, >>> >>> Just to make sure, you are performing the install on an Ubuntu 14.04 ? >>> >>> Are you trying to try it locally first using "localhost", or are you >>> targeting a real deploy with a real host name? >>> >>> Can you share your config file for the launcher + apache? >>> (You can do it privately depending on your target deploy / security) >>> >>> Moreover, can you validate that the session id c3079f24-73f9-11e4-a023-002590202132 >>> was properly mapped inside the text file that is shared between Apache and >>> the Python launcher? >>> >>> Thanks, >>> >>> Seb >>> >>> >>> >>> On Mon, Nov 24, 2014 at 10:29 AM, burlen >>> wrote: >>> >>>> Hi All, >>>> >>>> Making an attempt to install ParaView web. I need some assistance in >>>> trouble shooting. I am attaching a set of logs from a single attempt. I'm >>>> following the instructions for Ubuntu 14.04 >>>> . >>>> I see the x11 render window open, but the web page shows nothing. >>>> >>>> from the error log >>>> [Mon Nov 24 08:48:53 2014] [error] [client 131.243.240.15] File does >>>> not exist: /var/www/ParaView/www/ws: >>>> >>>> from the access log >>>> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET / >>>> ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 >>>> HTTP/1.1" 404 513 >>>> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >>>> /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" 404 457 >>>> >>>> Seems that the problem potentially relates to web sockets. How can I >>>> get further info about what's failing? Can anyone give some hint on >>>> troubleshooting this issue? >>>> >>>> Burlen >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>>> >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe:http://public.kitware.com/mailman/listinfo/paraview >>> >>> >>> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: From pcxjf1 at nottingham.ac.uk Wed Nov 26 10:22:18 2014 From: pcxjf1 at nottingham.ac.uk (James Furness) Date: Wed, 26 Nov 2014 15:22:18 +0000 Subject: [Paraview] csv -> vector variable -> streamline problem Message-ID: <8B7918BF-FB07-4279-B1E5-650815FD3547@exmail.nottingham.ac.uk> Hi, I have a csv file that is a 16x16x16 of data in the form: x, y, z, rho, j_x, j_y, j_z I am using a pipeline of: csv Reader | Table To Points (x, as X Column? etc.) | Calculator (iHat* j_x+jHat* j_y+kHat* j_z) > Result Looking at Result in the spreadsheet view shows a vector variable as I would expect. Also, visualising the result of the calculator filter as 3D Glyphs displays an expected grid of arrows, but they are all oriented pointing along the X axis. When I colour this by the Magnitude of Result they are coloured as expected, with the expected areas of high magnitude being red etc. I suspect I have already run into problems at this point, but if I continue and add a Stream Tracer to Result I see nothing. There are no streamlines shown. I have been trying to work out the problem, and been searching around for any clues. Any help on pointing out where I have gone wrong is greatly appreciated. I have attached the example csv. Many thanks, James -------------- next part -------------- A non-text attachment was scrubbed... Name: C6H6_B98_1.0z.csv Type: text/csv Size: 354135 bytes Desc: C6H6_B98_1.0z.csv URL: From alexandre.ancel at cemosis.fr Wed Nov 26 11:33:38 2014 From: alexandre.ancel at cemosis.fr (Alexandre Ancel) Date: Wed, 26 Nov 2014 17:33:38 +0100 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hello, An update on this issue that I'm still having: I tried to pinpoint the source of the problem. I went through Paraview and VTK code, and found that there is a check that fails to pass apparently, resulting in the errors previously mentionned. This check fails on the Paraview side. In VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx (from which vtkPVPostFilterExecutive inherits), the InputTypeIsValid (l.763) function seems to check for data type, and fails to find a matching type when I try to visualize the data extracted from the PVTrivialProducer. The recorded type (with input->GetClassName()) is vtkDataObject and the IsA function is unable to match it with any of the type in the list iterated over. Did I went to far in the code ? Could the information about the Unstructured grid nature be lost when I extract the data in Paraview ? By the way, this list is probably not the right place to talk about it, since it is related to VTK, but isn't the error printed when no match is found a bit confusing for the user ? I mean if the function does not find a valid type, it will by default choose the first type of the list, resulting in the kind of errors I had (vtkPolyData in my case): vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type vtkDataObject, but a vtkPolyData is required. Whereas the type checked was not matched with any type, thus not a vtkPolyData. By the way, if you want to have a look at the C++ code used in our library, it is available in: https://github.com/feelpp/feelpp/blob/develop/feel/feelfilters/exporterVTK_impl.hpp With: - the initialization part starting at line 115 - the coprocessing part starting at line 406 Thanks again for the help, Best regards, Alexandre Ancel On Mon, Nov 24, 2014 at 4:56 PM, Alexandre Ancel wrote: > Hello, > > I tested writing data from the python script, and the data is apparently > written correctly > when opening the files with Paraview. The issue is only present I try to > extract the data in Paraview. > I'll continue to investigate both in my code and Paraview. If you have > other pieces of advice as to where I could be looking, I would be > interested. > > I will also test if I can reproduce the issue with one of the example. > > Regards, > Alexandre Ancel > > On Fri, Nov 21, 2014 at 10:57 PM, Andy Bauer > wrote: > >> Hi Alexandre, >> >> If you could reproduce the errors that you're getting in one of the >> examples, we could try to track that down. I tried using your script and >> didn't have any issues with the CxxFullExample in the Catalyst example code >> and PV 4.2. >> >> >> Regards, >> Andy >> >> On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa >> wrote: >> >>> >>>> When I click on the icon located near the producer to visualize the >>>> data, I get an Extract component added to the pipeline. Trying to visualize >>>> this, then throws me the following errors: >>>> >>>> --- >>>> ERROR: In >>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>> line 810 >>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>> vtkDataObject, but a vtkPolyData is required. >>>> >>>> >>>> ERROR: In >>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>> line 810 >>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>> vtkDataObject, but a vtkPolyData is required. >>>> >>>> >>>> ERROR: In >>>> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >>>> line 504 >>>> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot >>>> be shown in the defaulted render view!! >>>> --- >>>> >>> >>> I have not run an example for an unstructured grid. It should work >>> similarly though. >>> I recently wrote a Catalyst adapter for an unstructured grid. I will run >>> Catalyst Live with that to see how that works. >>> >>> You could try however to save images or entire data from the pipeline >>> script as it is done in the Catalyst examples. >>> >>> >>> >>>> A few more questions come in my mind now: >>>> - If I understand correctly and if the user wants to pause the >>>> simulation, for example when he has only 1 timestep, he would have to do >>>> the following steps: >>>> * Connect with catalyst in Paraview >>>> * Set a breakpoint for time step 0 >>>> * launch the simulation >>>> Is that alright ? >>>> Would it be possible to do this with the play/next frame paraview >>>> buttons ? >>>> >>> >>> The communication between catalyst and the simulation happens only at >>> time steps. Because of that, Catalyst could only stop the simulation at >>> time step 2. >>> >>> >>> - Looking at the last lines of the blog post concerning pvserver. Is >>>> pvserver catalyst enabled by default ? >>>> >>> Yes. >>> >>> >>>> Does it mean that I can build the following pipeline ? >>>> Paraview (local computer) <-> pvserver (cluster frontal node) <-> >>>> catalyst enabled simulation (cluster nodes) >>>> >>> >>> You need to enable MPI to be able to run this. pvserver is the paraview >>> server that does all the rendering, only images are sent to ParaView (GUI). >>> >>> Dan >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >> > > > -- > Alexandre Ancel > Docteur, Ing?nieur de recherche / Phd, Research Engineer > Cemosis - alexandre.ancel at cemosis.fr > Tel: +33 (0)3 68 8*5 02 06* > IRMA - 7, rue Ren? Descartes > 67 000 Strasbourg, France > -- Alexandre Ancel Docteur, Ing?nieur de recherche / Phd, Research Engineer Cemosis - alexandre.ancel at cemosis.fr Tel: +33 (0)3 68 8*5 02 06* IRMA - 7, rue Ren? Descartes 67 000 Strasbourg, France -------------- next part -------------- An HTML attachment was scrubbed... URL: From andy.bauer at kitware.com Wed Nov 26 11:49:30 2014 From: andy.bauer at kitware.com (Andy Bauer) Date: Wed, 26 Nov 2014 11:49:30 -0500 Subject: [Paraview] csv -> vector variable -> streamline problem In-Reply-To: <8B7918BF-FB07-4279-B1E5-650815FD3547@exmail.nottingham.ac.uk> References: <8B7918BF-FB07-4279-B1E5-650815FD3547@exmail.nottingham.ac.uk> Message-ID: Hi James, You need to create volumetric cells for 3D. You can use the Delauney3D filter to do that or use the Table to Structured Grid filter if your points are ordered properly from in the CSV file. Then the stream tracer filter will work fine. Regards, Andy On Wed, Nov 26, 2014 at 10:22 AM, James Furness wrote: > Hi, > > I have a csv file that is a 16x16x16 of data in the form: > > x, y, z, rho, j_x, j_y, j_z > > I am using a pipeline of: > > csv Reader | Table To Points (x, as X Column? etc.) | Calculator > (iHat* j_x+jHat* j_y+kHat* j_z) > Result > > Looking at Result in the spreadsheet view shows a vector variable as I > would expect. Also, visualising the result of the calculator filter as 3D > Glyphs displays an expected grid of arrows, but they are all oriented > pointing along the X axis. When I colour this by the Magnitude of Result > they are coloured as expected, with the expected areas of high magnitude > being red etc. > > I suspect I have already run into problems at this point, but if I > continue and add a Stream Tracer to Result I see nothing. There are no > streamlines shown. > > I have been trying to work out the problem, and been searching around for > any clues. Any help on pointing out where I have gone wrong is greatly > appreciated. > > I have attached the example csv. > > Many thanks, > James > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From andy.bauer at kitware.com Wed Nov 26 12:06:13 2014 From: andy.bauer at kitware.com (Andy Bauer) Date: Wed, 26 Nov 2014 12:06:13 -0500 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hi, My guess is that the templating isn't working the way you think it is. I couldn't see where vtkout_type was being set but in general you probably don't want to template on the VTK data sets since the API where the work is done is different for each of them. Also, input->GetClassName() should be returning the name of the actual class you want to use, e.g. vtkPolyData, vtkUnstructuredGrid, etc. Another thing I noticed is that you probably want to get rid of the SetForceOutput(true) in: if(inSituProcessor->RequestDataDescription(dataDescription.GetPointer()) != 0) { dataDescription->GetInputDescriptionByName("input")->SetGrid(out); dataDescription->SetForceOutput(true); std::cout << "CoProcess " << inSituProcessor->CoProcess(dataDescription.GetPointer())<< std::endl; } This will ensure that all output from Catalyst is generated when possibly only a single output was requested in the pipelines. Regards, Andy On Wed, Nov 26, 2014 at 11:33 AM, Alexandre Ancel < alexandre.ancel at cemosis.fr> wrote: > Hello, > > An update on this issue that I'm still having: > I tried to pinpoint the source of the problem. I went through Paraview and > VTK code, and found that there is a check that fails to pass apparently, > resulting in the errors previously mentionned. This check fails on the > Paraview side. > In VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx (from which > vtkPVPostFilterExecutive inherits), the InputTypeIsValid (l.763) function > seems to check for data type, and fails to find a matching type when I try > to visualize the data extracted from the PVTrivialProducer. > The recorded type (with input->GetClassName()) is vtkDataObject and the > IsA function is unable to match it with any of the type in the list > iterated over. > > Did I went to far in the code ? Could the information about the > Unstructured grid nature be lost when I extract the data in Paraview ? > > By the way, this list is probably not the right place to talk about it, > since it is related to VTK, but isn't the error printed when no match is > found a bit confusing for the user ? > I mean if the function does not find a valid type, it will by default > choose the first type of the list, resulting in the kind of errors I had > (vtkPolyData in my case): > vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on > input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type > vtkDataObject, but a vtkPolyData is required. > > Whereas the type checked was not matched with any type, thus not a > vtkPolyData. > > By the way, if you want to have a look at the C++ code used in our > library, it is available in: > > https://github.com/feelpp/feelpp/blob/develop/feel/feelfilters/exporterVTK_impl.hpp > With: > - the initialization part starting at line 115 > - the coprocessing part starting at line 406 > > Thanks again for the help, > Best regards, > Alexandre Ancel > > > On Mon, Nov 24, 2014 at 4:56 PM, Alexandre Ancel < > alexandre.ancel at cemosis.fr> wrote: > >> Hello, >> >> I tested writing data from the python script, and the data is apparently >> written correctly >> when opening the files with Paraview. The issue is only present I try to >> extract the data in Paraview. >> I'll continue to investigate both in my code and Paraview. If you have >> other pieces of advice as to where I could be looking, I would be >> interested. >> >> I will also test if I can reproduce the issue with one of the example. >> >> Regards, >> Alexandre Ancel >> >> On Fri, Nov 21, 2014 at 10:57 PM, Andy Bauer >> wrote: >> >>> Hi Alexandre, >>> >>> If you could reproduce the errors that you're getting in one of the >>> examples, we could try to track that down. I tried using your script and >>> didn't have any issues with the CxxFullExample in the Catalyst example code >>> and PV 4.2. >>> >>> >>> Regards, >>> Andy >>> >>> On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa >>> wrote: >>> >>>> >>>>> When I click on the icon located near the producer to visualize the >>>>> data, I get an Extract component added to the pipeline. Trying to visualize >>>>> this, then throws me the following errors: >>>>> >>>>> --- >>>>> ERROR: In >>>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>>> line 810 >>>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>>> vtkDataObject, but a vtkPolyData is required. >>>>> >>>>> >>>>> ERROR: In >>>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>>> line 810 >>>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>>> vtkDataObject, but a vtkPolyData is required. >>>>> >>>>> >>>>> ERROR: In >>>>> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >>>>> line 504 >>>>> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot >>>>> be shown in the defaulted render view!! >>>>> --- >>>>> >>>> >>>> I have not run an example for an unstructured grid. It should work >>>> similarly though. >>>> I recently wrote a Catalyst adapter for an unstructured grid. I will >>>> run Catalyst Live with that to see how that works. >>>> >>>> You could try however to save images or entire data from the pipeline >>>> script as it is done in the Catalyst examples. >>>> >>>> >>>> >>>>> A few more questions come in my mind now: >>>>> - If I understand correctly and if the user wants to pause the >>>>> simulation, for example when he has only 1 timestep, he would have to do >>>>> the following steps: >>>>> * Connect with catalyst in Paraview >>>>> * Set a breakpoint for time step 0 >>>>> * launch the simulation >>>>> Is that alright ? >>>>> Would it be possible to do this with the play/next frame paraview >>>>> buttons ? >>>>> >>>> >>>> The communication between catalyst and the simulation happens only at >>>> time steps. Because of that, Catalyst could only stop the simulation at >>>> time step 2. >>>> >>>> >>>> - Looking at the last lines of the blog post concerning pvserver. Is >>>>> pvserver catalyst enabled by default ? >>>>> >>>> Yes. >>>> >>>> >>>>> Does it mean that I can build the following pipeline ? >>>>> Paraview (local computer) <-> pvserver (cluster frontal node) <-> >>>>> catalyst enabled simulation (cluster nodes) >>>>> >>>> >>>> You need to enable MPI to be able to run this. pvserver is the >>>> paraview server that does all the rendering, only images are sent to >>>> ParaView (GUI). >>>> >>>> Dan >>>> >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>>> >>> >> >> >> -- >> Alexandre Ancel >> Docteur, Ing?nieur de recherche / Phd, Research Engineer >> Cemosis - alexandre.ancel at cemosis.fr >> Tel: +33 (0)3 68 8*5 02 06* >> IRMA - 7, rue Ren? Descartes >> 67 000 Strasbourg, France >> > > > > -- > Alexandre Ancel > Docteur, Ing?nieur de recherche / Phd, Research Engineer > Cemosis - alexandre.ancel at cemosis.fr > Tel: +33 (0)3 68 8*5 02 06* > IRMA - 7, rue Ren? Descartes > 67 000 Strasbourg, France > -------------- next part -------------- An HTML attachment was scrubbed... URL: From burlen.loring at gmail.com Wed Nov 26 13:06:13 2014 From: burlen.loring at gmail.com (Burlen Loring) Date: Wed, 26 Nov 2014 10:06:13 -0800 Subject: [Paraview] paraview web issue In-Reply-To: References: <54736AF9.6070008@gmail.com> <54738B4E.4000902@lbl.gov> <54751809.6090004@lbl.gov> Message-ID: <54761695.402@gmail.com> That did it! Thanks Sebastien! On 11/25/2014 07:04 PM, Sebastien Jourdain wrote: > BTW, once you update the configuration file, you will need to restart > that launcher process. > It is not smart enough to watch that file. ;-) > > And down the road, if you want to use different machine for the Viz, > you can issue some ssh command to remotely start that ParaView process > even with mpi/pvserver. > > Seb > > On Tue, Nov 25, 2014 at 8:01 PM, Sebastien Jourdain > > wrote: > > Found the issue! Or at least I think I do ;-) > > The short answer is that the "ready_line" property inside your > launcher.json file should be "Starting factory" and not "Starting > factory - XYZ" for all the command lines. (Like written in the > documentation ;-) > > The reason is that the launcher look for that exact String in the > output of the process that it runs. This allow to know when the > process is ready. And the line "Starting factory - XYZ" never show > up, hence the error message > "Session did not start before timeout expired. Check session > logs." has it think the process is not ready. > > Let me know if you run into something else. > > Seb > > > > > On Tue, Nov 25, 2014 at 5:00 PM, Burlen Loring > wrote: > > Hi Sebastien, > > OK, I finally upgrade to Ubuntu 14.04 and apache 2.4! however, > I still have some issue. again I see the render window pop up > in the background, in the browser I have the ParaView web logo > and spinning wheel, now after a few seconds a dialog: Session > did not start before timeout expired. Check session logs. > > I cranked up the log verbosity in apache. attached > everything. Any idea what the problem is? how to get more > info? paraview has an error, how does that get reported? > > Thanks > Burlen > > > On 11/24/2014 12:48 PM, Sebastien Jourdain wrote: >> Apache 2.2 will probably be an issue as WS forwarding was not >> properly supported with url rewrite. >> >> You may need to build Apache yourself on that distribution. >> The one that have all the fix and is supposed to work is 2.4.7+. >> >> We have some additional documentation about that part here: >> >> http://www.paraview.org/ParaView3/Doc/Nightly/www/js-doc/index.html#!/guide/apache_front_end >> >> >> Seb >> >> On Mon, Nov 24, 2014 at 12:47 PM, Burlen Loring >> > wrote: >> >> Hi Sebastien, >> >> this is for a public deployment but I am testing in the >> browser while it locally logged into the system. This >> server is running ubuntu 11.04, apache 2.2.22. I hope >> that this isn't a roadblock.I can't easily upgrade. >> >> your instructions for 14.04 went off OK but in 2 spots I >> had to find a work around: >> 1) proxy_wstunnel had to be installed manually, this went >> without a hitch and it loaded up without error >> 2) in the apache config I had to comment #Require all >> granted as that wasn't valid in 2.2 >> >> the session id was in the proxy.txt file and had the port >> number 9100 which I see elsewhere in the logs, so that >> looks OK. >> >> I'm attaching the launcher config. >> >> the apache config is pasted below. >> >> 131 >> ################################################################################333 >> 132 >> 133 ServerName paraview.lbl.gov >> 134 ServerAdmin bloring at lbl.gov >> 135 DocumentRoot /var/www/ParaView/www >> 136 ErrorLog "/var/www/ParaView/logs/error.log" >> 137 CustomLog "/var/www/ParaView/logs/access.log" common >> 138 >> 139 >> 140 Options Indexes FollowSymLinks >> 141 Order allow,deny >> 142 Allow from all >> 143 AllowOverride None >> 144 #for ver >= 2.4 >> 145 #Require all granted >> 146 >> 147 >> 148 # Handle launcher forwarding >> 149 ProxyPass /paraview http://localhost:8080/paraview >> 150 >> 151 # Handle WebSocket forwarding >> 152 RewriteEngine On >> 153 RewriteMap session-to-port >> txt:/var/www/ParaView/proxy.txt >> 154 RewriteCond %{QUERY_STRING} ^sessionId=(.*)$ [NC] >> 155 RewriteRule ^/proxy.*$ >> ws://${session-to-port:%1}/ws [P] >> 156 >> >> >> On 11/24/2014 10:02 AM, Sebastien Jourdain wrote: >>> Hi Burlen, >>> >>> Just to make sure, you are performing the install on an >>> Ubuntu 14.04 ? >>> >>> Are you trying to try it locally first using >>> "localhost", or are you targeting a real deploy with a >>> real host name? >>> >>> Can you share your config file for the launcher + apache? >>> (You can do it privately depending on your target deploy >>> / security) >>> >>> Moreover, can you validate that the session id >>> c3079f24-73f9-11e4-a023-002590202132 was properly >>> mapped inside the text file that is shared between >>> Apache and the Python launcher? >>> >>> Thanks, >>> >>> Seb >>> >>> >>> >>> On Mon, Nov 24, 2014 at 10:29 AM, burlen >>> >> > wrote: >>> >>> Hi All, >>> >>> Making an attempt to install ParaView web. I need >>> some assistance in trouble shooting. I am attaching >>> a set of logs from a single attempt. I'm following >>> theinstructions for Ubuntu 14.04 >>> . >>> I see the x11 render window open, but the web page >>> shows nothing. >>> >>> from the error log >>> [Mon Nov 24 08:48:53 2014] [error] [client >>> 131.243.240.15] File does not exist: >>> /var/www/ParaView/www/ws: >>> >>> from the access log >>> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >>> /ws://localhost:9100/ws?sessionId=c3079f24-73f9-11e4-a023-002590202132 >>> HTTP/1.1" 404 513 >>> 131.243.240.15 - - [24/Nov/2014:08:48:53 -0800] "GET >>> /proxy?sessionId=c3079f24-73f9-11e4-a023-002590202132 HTTP/1.1" >>> 404 457 >>> >>> Seems that the problem potentially relates to web >>> sockets. How can I get further info about what's >>> failing? Can anyone give some hint on >>> troubleshooting this issue? >>> >>> Burlen >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView >>> Wiki at: http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >>> >>> >>> _______________________________________________ >>> Powered bywww.kitware.com >>> >>> Visit other Kitware open-source projects athttp://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at:http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >> >> > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From wascott at sandia.gov Wed Nov 26 13:11:27 2014 From: wascott at sandia.gov (Scott, W Alan) Date: Wed, 26 Nov 2014 18:11:27 +0000 Subject: [Paraview] Nightly builds on the Kitware website Message-ID: <31beb628d950470f9aecdeaa1d97e954@ES05AMSNLNT.srn.sandia.gov> Nightly builds are not available on the Kitware website. I have a user that needs to try a nightly. Is there an ETA on when it will be fixed? Thanks, Alan -------------- next part -------------- An HTML attachment was scrubbed... URL: From berk.geveci at kitware.com Wed Nov 26 18:53:53 2014 From: berk.geveci at kitware.com (Berk Geveci) Date: Wed, 26 Nov 2014 18:53:53 -0500 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) In-Reply-To: References: Message-ID: Thanks Rich. The molecule data gets into the range that requires parallel visualization extremely rarely. However, this may affect others, such as those loading large vtu files. We'll make sure that this is fixed very soon. -berk On Tue, Nov 25, 2014 at 5:15 PM, Cook, Rich wrote: > I do not have an urgent need to view this data. However, be advised that > I got it from what appears to be the PDB canonical source, so I assumed our > molecular people would appreciate being able to visualize their stuff. This > kind of model doesn?t usually get that big, though, probably. > > http://www.rcsb.org/pdb/explore.do?structureId=1lmb > > Thank you kindly. No workaround is needed. > ? Rich > > On Nov 25, 2014, at 12:55 PM, Berk Geveci > wrote: > > Marcus will investigate the errors. > > They are not related to why the dataset is no longer distributed. There > was code in 4.1 that automatically redistributed data from serial readers > using a very naive approach. That code is no longer there. We are > investigating various options of improving on the 4.1 functionality. I > would normally say that you can use the D3 filter to distribute the data > but I was cautious and tried it first. It crashes :-( This dataset has > string arrays in it, which it seems D3 does not handle. > > Do you have a particular use case driving parallel PDB capability? If > you do, I can find some workarounds of these issues. If not, D3 should > nicely work on most polydata and unstructured grid sources. We are working > on better ways of redistributing the other data types. > > Best, > -berk > > On Tue, Nov 25, 2014 at 9:44 AM, Marcus D. Hanwell < > marcus.hanwell at kitware.com> wrote: > >> Hi, >> >> I think I know the cause, the PDB reader was modified to produce a >> vtkMolecule in addition to the vtkPolyData I think it has always produced. >> It looks like there is a packaging issue, and the XML file cannot be found. >> We should probably just statically compile the file in, or convert it to a >> header as the data is pretty static - atomic radii, colors, etc. >> >> Marcus >> >> >> On Tue, Nov 25, 2014 at 9:06 AM, Berk Geveci >> wrote: >> >>> Hey Rich, >>> >>> Can you send me the dataset? >>> >>> Best, >>> -berk >>> >>> On Mon, Nov 24, 2014 at 7:25 PM, Cook, Rich wrote: >>> >>>> Hi, >>>> I have recently compiled paraview 4.2.0 on our clusters in the same way >>>> I compile with 4.1.0 and am getting some errors. >>>> I run pvserver in parallel, and it does not give any weird outputs. >>>> I connect with it from my desktop (Mac OS X). I can see in the desktop >>>> GUI that four remote servers are connected. >>>> I open up a PDB dataset and it is different. I see two ?Output? >>>> objects in the pipeline browser. This is different than the behavior in >>>> 4.1.0. >>>> >>>> >>>> >>>> I click Apply and get smacked in the face with an error dialog. >>>> >>>> ERROR: In >>>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, >>>> line 68 >>>> vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. >>>> Checked >>>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry >>>> and >>>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry >>>> >>>> >>>> ERROR: In >>>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, >>>> line 382 >>>> vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no >>>> Stream set. >>>> >>>> >>>> ERROR: In >>>> /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>> line 710 >>>> vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of >>>> algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but >>>> is not optional. >>>> >>>> >>>> I?m unable to color by process scalar ID, or more precisely, the >>>> Filter seems to get applied but the color does not change. Appears all >>>> work is done on process 0. >>>> >>>> Something is vewwwy scwewwy. >>>> >>>> Help? >>>> >>>> >>>> -- >>>> ?Richard Cook >>>> ? Lawrence Livermore National Laboratory >>>> Bldg-453 Rm-4024, Mail Stop L-557 >>>> 7000 East Avenue, Livermore, CA, 94550, USA >>>> ? (office) (925) 423-9605 >>>> ? (fax) (925) 423-6961 >>>> --- >>>> Information Management & Graphics Grp., Services & Development Div., >>>> Integrated Computing & Communications Dept. >>>> (opinions expressed herein are mine and not those of LLNL) >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://public.kitware.com/mailman/listinfo/paraview >>>> >>>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >> > > -- > ?Richard Cook > ? Lawrence Livermore National Laboratory > Bldg-453 Rm-4024, Mail Stop L-557 > 7000 East Avenue, Livermore, CA, 94550, USA > ? (office) (925) 423-9605 > ? (fax) (925) 423-6961 > --- > Information Management & Graphics Grp., Services & Development Div., > Integrated Computing & Communications Dept. > (opinions expressed herein are mine and not those of LLNL) > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cook47 at llnl.gov Wed Nov 26 20:03:21 2014 From: cook47 at llnl.gov (Cook, Rich) Date: Thu, 27 Nov 2014 01:03:21 +0000 Subject: [Paraview] Cannot get parallelism working in paraview 4.2.0 on our clusters (works with 4.1.0) In-Reply-To: References: Message-ID: <00836168-69FB-4E63-A2F5-62215CA96C95@llnl.gov> Happy Thanksgiving! :-) On Nov 26, 2014, at 3:53 PM, Berk Geveci > wrote: Thanks Rich. The molecule data gets into the range that requires parallel visualization extremely rarely. However, this may affect others, such as those loading large vtu files. We'll make sure that this is fixed very soon. -berk On Tue, Nov 25, 2014 at 5:15 PM, Cook, Rich > wrote: I do not have an urgent need to view this data. However, be advised that I got it from what appears to be the PDB canonical source, so I assumed our molecular people would appreciate being able to visualize their stuff. This kind of model doesn?t usually get that big, though, probably. http://www.rcsb.org/pdb/explore.do?structureId=1lmb Thank you kindly. No workaround is needed. ? Rich On Nov 25, 2014, at 12:55 PM, Berk Geveci > wrote: Marcus will investigate the errors. They are not related to why the dataset is no longer distributed. There was code in 4.1 that automatically redistributed data from serial readers using a very naive approach. That code is no longer there. We are investigating various options of improving on the 4.1 functionality. I would normally say that you can use the D3 filter to distribute the data but I was cautious and tried it first. It crashes :-( This dataset has string arrays in it, which it seems D3 does not handle. Do you have a particular use case driving parallel PDB capability? If you do, I can find some workarounds of these issues. If not, D3 should nicely work on most polydata and unstructured grid sources. We are working on better ways of redistributing the other data types. Best, -berk On Tue, Nov 25, 2014 at 9:44 AM, Marcus D. Hanwell > wrote: Hi, I think I know the cause, the PDB reader was modified to produce a vtkMolecule in addition to the vtkPolyData I think it has always produced. It looks like there is a packaging issue, and the XML file cannot be found. We should probably just statically compile the file in, or convert it to a header as the data is pretty static - atomic radii, colors, etc. Marcus On Tue, Nov 25, 2014 at 9:06 AM, Berk Geveci > wrote: Hey Rich, Can you send me the dataset? Best, -berk On Mon, Nov 24, 2014 at 7:25 PM, Cook, Rich > wrote: Hi, I have recently compiled paraview 4.2.0 on our clusters in the same way I compile with 4.1.0 and am getting some errors. I run pvserver in parallel, and it does not give any weird outputs. I connect with it from my desktop (Mac OS X). I can see in the desktop GUI that four remote servers are connected. I open up a PDB dataset and it is different. I see two ?Output? objects in the pipeline browser. This is different than the behavior in 4.1.0. I click Apply and get smacked in the face with an error dialog. ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry/vtkBlueObeliskDataParser.cxx, line 68 vtkBlueObeliskDataParser (0x7fea5e2a9980): Cannot find elements.xml. Checked /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview-build/CMakeFiles/__macos_install/share/paraview-4.2/vtkDomainsChemistry and /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Domains/Chemistry ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/IO/XMLParser/vtkXMLParser.cxx, line 382 vtkBlueObeliskDataParser (0x7fea5e2a9980): Parse() called with no Stream set. ERROR: In /Users/kitware/Dashboards/MyTests/NightlyMaster/ParaViewSuperbuild-Release-Python27/paraview/src/paraview/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, line 710 vtkPVDataRepresentationPipeline (0x7fea5e2a4d80): Input port 0 of algorithm vtkMoleculeRepresentation(0x7fea56c005d0) has 0 connections but is not optional. I?m unable to color by process scalar ID, or more precisely, the Filter seems to get applied but the color does not change. Appears all work is done on process 0. Something is vewwwy scwewwy. Help? -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -- ?Richard Cook ? Lawrence Livermore National Laboratory Bldg-453 Rm-4024, Mail Stop L-557 7000 East Avenue, Livermore, CA, 94550, USA ? (office) (925) 423-9605 ? (fax) (925) 423-6961 --- Information Management & Graphics Grp., Services & Development Div., Integrated Computing & Communications Dept. (opinions expressed herein are mine and not those of LLNL) -------------- next part -------------- An HTML attachment was scrubbed... URL: From christian.butcher at oist.jp Thu Nov 27 03:12:12 2014 From: christian.butcher at oist.jp (Christian Butcher) Date: Thu, 27 Nov 2014 17:12:12 +0900 Subject: [Paraview] OpenFOAM Reader - Showing multiple velocity components simulaneously Message-ID: Dear ParaView list, I'm currently trying to open multiple 'RenderView' windows so that I can show, for example, U_x, U_y, and U_z along with U_Magnitude simultaneously for the purpose of exporting an animation using ParaView-v4.2.0. Studying a Python trace whilst switching components using the Qt GUI suggests this is not trivially possible using either the GUI or a Python shell. The Python trace shows these lines: uLUT = GetColorTransferFunction('U') uLUT.VectorMode = 'Magnitude' and switching to, for example, U_y requires uLUT.VectorMode = 'Component' uLUT.VectorComponent = 0 Since the uLUT proxy is returned by the GetColorTransferFunction('U') function, I'm unsure but doubting that I can duplicate this proxy and set different values in different Views. Duplicating data files allows the reading of a file multiple times, but isn't really practicable given memory constraints etc. Looking at the OpenFOAM reader in vtkOpenFOAMReader.{h,cxx} and vtkPOpenFOAMReader.{h,cxx} suggests that the relevant function to modify in the reader might be vtkFloatArray *vtkOpenFOAMReaderPrivate::FillField(vtkFoamEntry *entryPtr, int nElements, vtkFoamIOobject *ioPtr, const vtkStdString &fieldType) .P but since this has to return a (single) vtkFloatArray*, I'm unsure if any modifications are likely to help me. The 'U' field can be identified using statements like: if (ioPtr->GetObjectName() == "U") { // process here } Individual components are accessible using: data = static_cast(entry.Ptr()); float *tuple = data->GetPointer(nComponents * tupleI); tuple[0] = xValueOfVelocityForCellReferedToByTupleI; etc. The function can be found around line 6480 in vtkOpenFOAMReader.cxx Does anyone have an idea I could use to simultaneously display different velocity components (and magnitude, if possible, but this can be coded into a 4th component fairly easily I suspect, if only individual components could be simultaneously shown)? Best, Christian Butcher From alexandre.ancel at cemosis.fr Thu Nov 27 05:40:12 2014 From: alexandre.ancel at cemosis.fr (Alexandre Ancel) Date: Thu, 27 Nov 2014 11:40:12 +0100 Subject: [Paraview] Interfacing with FE simulation using Catalyst In-Reply-To: References: Message-ID: Hello, Regarding to the vtkout_type, it is defined in the corresponding header: https://github.com/feelpp/feelpp/blob/develop/feel/feelfilters/exporterVTK.hpp I guess it is not really an issue as it is a typedef to vtkUnstructuredGrid. Initially I intended to use vtkPolyData for 1D and 2D meshes; and vtkUnstructuredGrid for 3D meshes, but I guess that I will totally switch to vtkUnstucturedGrid as it would be able to handle all the cases. Thanks for the advice regarding to ForceOutput, I'll change it. Now back to my issue, I managed to make it work. In the end, it was only me misusing Catalyst. Just how I make it work now: (for people that might have a similar issue to mine) - Launch Paraview and allow connections for Catalyst - Pause the simulation (It will thus pause at the first timestep) - Launch the simulation and visualize the data in Paraview Thanks again for your time and help, Best regards, Alexandre Ancel On Wed, Nov 26, 2014 at 6:06 PM, Andy Bauer wrote: > Hi, > > My guess is that the templating isn't working the way you think it is. I > couldn't see where vtkout_type was being set but in general you probably > don't want to template on the VTK data sets since the API where the work is > done is different for each of them. Also, input->GetClassName() should be > returning the name of the actual class you want to use, e.g. vtkPolyData, > vtkUnstructuredGrid, etc. > > Another thing I noticed is that you probably want to get rid of the > SetForceOutput(true) in: > if(inSituProcessor->RequestDataDescription(dataDescription.GetPointer()) > != 0) { dataDescription->GetInputDescriptionByName("input")->SetGrid > (out); dataDescription->SetForceOutput(true); std::cout << "CoProcess " > << inSituProcessor->CoProcess(dataDescription.GetPointer())<< std::endl; > } > This will ensure that all output from Catalyst is generated when possibly > only a single output was requested in the pipelines. > > Regards, > Andy > > On Wed, Nov 26, 2014 at 11:33 AM, Alexandre Ancel < > alexandre.ancel at cemosis.fr> wrote: > >> Hello, >> >> An update on this issue that I'm still having: >> I tried to pinpoint the source of the problem. I went through Paraview >> and VTK code, and found that there is a check that fails to pass >> apparently, resulting in the errors previously mentionned. This check fails >> on the Paraview side. >> In VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx (from which >> vtkPVPostFilterExecutive inherits), the InputTypeIsValid (l.763) function >> seems to check for data type, and fails to find a matching type when I try >> to visualize the data extracted from the PVTrivialProducer. >> The recorded type (with input->GetClassName()) is vtkDataObject and the >> IsA function is unable to match it with any of the type in the list >> iterated over. >> >> Did I went to far in the code ? Could the information about the >> Unstructured grid nature be lost when I extract the data in Paraview ? >> >> By the way, this list is probably not the right place to talk about it, >> since it is related to VTK, but isn't the error printed when no match is >> found a bit confusing for the user ? >> I mean if the function does not find a valid type, it will by default >> choose the first type of the list, resulting in the kind of errors I had >> (vtkPolyData in my case): >> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >> vtkDataObject, but a vtkPolyData is required. >> >> Whereas the type checked was not matched with any type, thus not a >> vtkPolyData. >> >> By the way, if you want to have a look at the C++ code used in our >> library, it is available in: >> >> https://github.com/feelpp/feelpp/blob/develop/feel/feelfilters/exporterVTK_impl.hpp >> With: >> - the initialization part starting at line 115 >> - the coprocessing part starting at line 406 >> >> Thanks again for the help, >> Best regards, >> Alexandre Ancel >> >> >> On Mon, Nov 24, 2014 at 4:56 PM, Alexandre Ancel < >> alexandre.ancel at cemosis.fr> wrote: >> >>> Hello, >>> >>> I tested writing data from the python script, and the data is apparently >>> written correctly >>> when opening the files with Paraview. The issue is only present I try >>> to extract the data in Paraview. >>> I'll continue to investigate both in my code and Paraview. If you have >>> other pieces of advice as to where I could be looking, I would be >>> interested. >>> >>> I will also test if I can reproduce the issue with one of the example. >>> >>> Regards, >>> Alexandre Ancel >>> >>> On Fri, Nov 21, 2014 at 10:57 PM, Andy Bauer >>> wrote: >>> >>>> Hi Alexandre, >>>> >>>> If you could reproduce the errors that you're getting in one of the >>>> examples, we could try to track that down. I tried using your script and >>>> didn't have any issues with the CxxFullExample in the Catalyst example code >>>> and PV 4.2. >>>> >>>> >>>> Regards, >>>> Andy >>>> >>>> On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa >>>> wrote: >>>> >>>>> >>>>>> When I click on the icon located near the producer to visualize the >>>>>> data, I get an Extract component added to the pipeline. Trying to visualize >>>>>> this, then throws me the following errors: >>>>>> >>>>>> --- >>>>>> ERROR: In >>>>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>>>> line 810 >>>>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>>>> vtkDataObject, but a vtkPolyData is required. >>>>>> >>>>>> >>>>>> ERROR: In >>>>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>>>> line 810 >>>>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>>>> vtkDataObject, but a vtkPolyData is required. >>>>>> >>>>>> >>>>>> ERROR: In >>>>>> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >>>>>> line 504 >>>>>> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot >>>>>> be shown in the defaulted render view!! >>>>>> --- >>>>>> >>>>> >>>>> I have not run an example for an unstructured grid. It should work >>>>> similarly though. >>>>> I recently wrote a Catalyst adapter for an unstructured grid. I will >>>>> run Catalyst Live with that to see how that works. >>>>> >>>>> You could try however to save images or entire data from the pipeline >>>>> script as it is done in the Catalyst examples. >>>>> >>>>> >>>>> >>>>>> A few more questions come in my mind now: >>>>>> - If I understand correctly and if the user wants to pause the >>>>>> simulation, for example when he has only 1 timestep, he would have to do >>>>>> the following steps: >>>>>> * Connect with catalyst in Paraview >>>>>> * Set a breakpoint for time step 0 >>>>>> * launch the simulation >>>>>> Is that alright ? >>>>>> Would it be possible to do this with the play/next frame paraview >>>>>> buttons ? >>>>>> >>>>> >>>>> The communication between catalyst and the simulation happens only at >>>>> time steps. Because of that, Catalyst could only stop the simulation at >>>>> time step 2. >>>>> >>>>> >>>>> - Looking at the last lines of the blog post concerning pvserver. Is >>>>>> pvserver catalyst enabled by default ? >>>>>> >>>>> Yes. >>>>> >>>>> >>>>>> Does it mean that I can build the following pipeline ? >>>>>> Paraview (local computer) <-> pvserver (cluster frontal node) <-> >>>>>> catalyst enabled simulation (cluster nodes) >>>>>> >>>>> >>>>> You need to enable MPI to be able to run this. pvserver is the >>>>> paraview server that does all the rendering, only images are sent to >>>>> ParaView (GUI). >>>>> >>>>> Dan >>>>> >>>>> >>>>> _______________________________________________ >>>>> Powered by www.kitware.com >>>>> >>>>> Visit other Kitware open-source projects at >>>>> http://www.kitware.com/opensource/opensource.html >>>>> >>>>> Please keep messages on-topic and check the ParaView Wiki at: >>>>> http://paraview.org/Wiki/ParaView >>>>> >>>>> Follow this link to subscribe/unsubscribe: >>>>> http://public.kitware.com/mailman/listinfo/paraview >>>>> >>>>> >>>> >>> >>> >>> -- >>> Alexandre Ancel >>> Docteur, Ing?nieur de recherche / Phd, Research Engineer >>> Cemosis - alexandre.ancel at cemosis.fr >>> Tel: +33 (0)3 68 8*5 02 06* >>> IRMA - 7, rue Ren? Descartes >>> 67 000 Strasbourg, France >>> >> >> >> >> -- >> Alexandre Ancel >> Docteur, Ing?nieur de recherche / Phd, Research Engineer >> Cemosis - alexandre.ancel at cemosis.fr >> Tel: +33 (0)3 68 8*5 02 06* >> IRMA - 7, rue Ren? Descartes >> 67 000 Strasbourg, France >> > > -- Alexandre Ancel Docteur, Ing?nieur de recherche / Phd, Research Engineer Cemosis - alexandre.ancel at cemosis.fr Tel: +33 (0)3 68 8*5 02 06* IRMA - 7, rue Ren? Descartes 67 000 Strasbourg, France -------------- next part -------------- An HTML attachment was scrubbed... URL: From whugang at gmail.com Thu Nov 27 08:06:24 2014 From: whugang at gmail.com (=?UTF-8?B?5ZC05Lqa5Yia?=) Date: Thu, 27 Nov 2014 21:06:24 +0800 Subject: [Paraview] how to supprot the vortex detection and the vortex core line Message-ID: Dear all, the vortex detection(vortex core line) and visualization has been popular, but this function does not exitst in paraview. when dose paraview support this function ? thanks. -- All the best ! Gang. -------------- next part -------------- An HTML attachment was scrubbed... URL: From gda at tacc.utexas.edu Thu Nov 27 13:40:52 2014 From: gda at tacc.utexas.edu (Greg Abram) Date: Thu, 27 Nov 2014 18:40:52 +0000 Subject: [Paraview] Bugs with pvti and pvd Message-ID: <82889283-897A-4AF7-86AE-05870691B50C@tacc.utexas.edu> Hey y'all - Tracking down a user's problem, I'm getting some problems with parallel-format files. I've generated a little test case using the Wavelet source and a Calculator, creating three time steps with Result being mag(coords)*1.0 1.1 and 1.2, which contour as a shrinking sphere. I'm running it on 4 processes, so when I export each "timestep" I generate 4 .vti's and a .pvti. These are the 'w' files. When I try to load the following w.pvd on Maverick (1 node, 4 processes): (as per http://www.paraview.org/Wiki/ParaView/Data_formats#PVD_File_Format) I get only parts of the data for each timestep when I use 4.2, and when I use 4.1 I get a double-ghost-zone gap between the partitions. When I write a similar dataset after Tetrahedralizing it (to get the vtu files my user is having troubles with), 4.2 does the same thing - only shows one partition, though 4.1 seems OK. These are the the 't' files. I've uploaded the dataset to: https://utexas.box.com/s/iwn4ajbvfh2davd375gh Greg Gregory D. Abram, Ph.D. Research Engineering/Scientist Associate Texas Advanced Computing Center The University of Texas at Austin (512) 471-8196 gda at tacc.utexas.edu [TACC Website] Connect With TACC -------------- next part -------------- An HTML attachment was scrubbed... URL: From gda at tacc.utexas.edu Sat Nov 29 19:09:43 2014 From: gda at tacc.utexas.edu (Greg Abram) Date: Sun, 30 Nov 2014 00:09:43 +0000 Subject: [Paraview] Extents problem Message-ID: <2B384706-86E3-44FA-91D8-10FAF834FB23@tacc.utexas.edu> Hey y'all - I'm trying to write a parallel reader for a user's structured grid and am having a problem with extents. I've included a plugin that demonstrates the problem - a little "importer" that hardwires a whole extent of 0,10 in each axis. In RequestInformation it calls: outInfo->Set(vtkStreamingDemandDrivenPipeline::WHOLE_EXTENT(),this->Internals->extent,6); outInfo->Set(CAN_PRODUCE_SUB_EXTENT(), 1); and in RequestData it calls outInfo->Get(vtkStreamingDemandDrivenPipeline::UPDATE_EXTENT(),subext); vtkStructuredGrid *sgrid = vtkStructuredGrid::SafeDownCast(output); sgrid->SetExtent(subext); to get the update extent from the pipeline and set it onto the structured grid.. It then stuffs points and data to create a grid from -1 to 1 in each axis. When I run it on 2 processes, the result *looks* right, it fills the -1 to 1 space along each axis, there are the right number of cells and points, ProcessIdScalars shows two equal size partitions, but the extent is clearly not right - the wireframe and surface surface boundaries are incomplete and the extent shown in the Information tab is correct for only one of the two parts. So, what am I doing wrong? If anyone is interested, I uploaded the plugin code to: https://utexas.box.com/s/d6ef5kx4oxm1d205hbbo Gregory D. Abram, Ph.D. Research Engineering/Scientist Associate Texas Advanced Computing Center The University of Texas at Austin (512) 471-8196 gda at tacc.utexas.edu [TACC Website] Connect With TACC -------------- next part -------------- An HTML attachment was scrubbed... URL: From KSheldon at slb.com Sun Nov 30 21:32:32 2014 From: KSheldon at slb.com (Ken Sheldon) Date: Mon, 1 Dec 2014 02:32:32 +0000 Subject: [Paraview] XDMF Bug (Hard-coded drive letter C:) Message-ID: <2911E772881F8B4AB39462AA4A35EC550101989D8A@NL0230MBX12N1.DIR.slb.com> It appears ParaView uses the wrong drive letter when writing or reading HDF5 files via XDMF. Steps to reproduce: Start ParaView (I am using Version 4.2.0 64 Bit for Windows 7 64-bit) >From the menu, select Sources --> Plane Set X Resolution 10 Set Y Resolution 10 Apply File --> Save Data File format Xdmf data file File name D:\SAMPLE.XMF Open the XMF file in a text editor. Bug 1: The file refers to D:/SAMPLE.h5 . However, there is no such file. The HDF5 file is C:\SAMPLE.H5. Bug 2: Reset the ParaView session and open the file D:\SAMPLE.XMF. Apply. The data loads properly, although the XMF file refers to D:/SAMPLE.h5, which does not exist. Bug 2.1: Reset the ParaView session. Move the file SAMPLE.H5 to D:\ (The directory referenced in D:\SAMPLE.XMF) In Paraview, select File --> Open SAMPLE.XMF. Apply. The program displays the Output Messages window with the following error message: ERROR: In C:\DBD\pvs-x64\paraview\src\paraview\VTK\IO\Xdmf2\vtkXdmfReader.cxx, line 409 vtkXdmfReader (000000000EA5E7E0): Failed to read data. ERROR: In C:\DBD\pvs-x64\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExecutive.cxx, line 783 vtkPVCompositeDataPipeline (000000000DBCCA70): Algorithm vtkFileSeriesReader(000000000DBCC5C0) returned failure for request: vtkInformation (000000000C4FE530) Debug: Off Modified Time: 673302 Reference Count: 1 Registered Events: (none) Request: REQUEST_DATA ALGORITHM_AFTER_FORWARD: 1 FORWARD_DIRECTION: 0 FROM_OUTPUT_PORT: 0 -------------- next part -------------- An HTML attachment was scrubbed... URL: From utkarsh.ayachit at kitware.com Sun Nov 30 22:06:31 2014 From: utkarsh.ayachit at kitware.com (Utkarsh Ayachit) Date: Sun, 30 Nov 2014 22:06:31 -0500 Subject: [Paraview] Nightly builds on the Kitware website In-Reply-To: <31beb628d950470f9aecdeaa1d97e954@ES05AMSNLNT.srn.sandia.gov> References: <31beb628d950470f9aecdeaa1d97e954@ES05AMSNLNT.srn.sandia.gov> Message-ID: There seems to be a glitch in the component that uploads the binaries generated on the dashboard to the download site. We'll track that down. You can still download the binaries form the dashboard itself [1]. Utkarsh [1] http://www.paraview.org/Wiki/ParaView/Superbuild#Obtaining_the_source On Wed, Nov 26, 2014 at 1:11 PM, Scott, W Alan wrote: > Nightly builds are not available on the Kitware website. I have a user > that needs to try a nightly. Is there an ETA on when it will be fixed? > > Thanks, > > Alan > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > -------------- next part -------------- An HTML attachment was scrubbed... URL: