[Paraview] ParaView superbuild matplotlib not finding numpy (UNCLASSIFIED)
Su, Simon M CTR USARMY ARL (US)
simon.m.su.ctr at mail.mil
Wed Jun 4 08:52:23 EDT 2014
Classification: UNCLASSIFIED
Caveats: NONE
This is great. Thanks Cory.
-simon
-----Original Message-----
From: Cory Quammen [mailto:cory.quammen at kitware.com]
Sent: Wednesday, June 04, 2014 8:50 AM
To: Su, Simon M CTR USARMY ARL (US)
Cc: ParaView
Subject: Re: [Paraview] ParaView superbuild matplotlib not finding numpy
(UNCLASSIFIED)
Thanks for testing, Simon. We'll get that patch in soon so you shouldn't run
into this problem anymore.
Cory
On Wed, Jun 4, 2014 at 8:17 AM, Su, Simon M CTR USARMY ARL (US)
<simon.m.su.ctr at mail.mil> wrote:
Classification: UNCLASSIFIED
Caveats: NONE
Cory,
I have tested a new build on both the cray machines and your wildcard fix
worked.
Thanks for your help.
-simon
-----Original Message-----
From: Cory Quammen [mailto:cory.quammen at kitware.com]
Sent: Tuesday, June 03, 2014 3:05 PM
To: Su, Simon M CTR USARMY ARL (US)
Cc: ParaView
Subject: Re: [Paraview] ParaView superbuild matplotlib not finding numpy
(UNCLASSIFIED)
Simon,
I have posted a potential fix to the gerrit review system:
http://review.source.kitware.com/#/t/4259/
Can you try this out on this system to make sure it works? It basically
replaces the 64 I asked you to add after lib in matplotlib.build.cmake with a
* wildcard.
Thanks,
Cory
On Tue, Jun 3, 2014 at 9:59 AM, Su, Simon M CTR USARMY ARL (US)
<simon.m.su.ctr at mail.mil> wrote:
Classification: UNCLASSIFIED
Caveats: NONE
Cory,
Yeap.... the build went pass the problem of matplotlib not finding
numpy....
I will start turning of other features in the superbuild and try to
build
them
Thanks for your help.
-simon
-----Original Message-----
From: Cory Quammen [mailto:cory.quammen at kitware.com]
Sent: Tuesday, June 03, 2014 9:48 AM
To: Su, Simon M CTR USARMY ARL (US)
Cc: ParaView
Subject: Re: [Paraview] ParaView superbuild matplotlib not finding
numpy
(UNCLASSIFIED)
Simon,
Hmm, that's odd that the find command didn't turn up anything. On
what kind
of
system are you compiling?
In any case, I think I see the problem. Can you modify the CMake
source file
ParaViewSuperbuild/Projects/matplotlib.build.cmake
so that the line
file(GLOB_RECURSE numpy-egg "${NUMPY_INSTALL_DIR}/lib/*.egg-info")
is replaced with
file(GLOB_RECURSE numpy-egg "${NUMPY_INSTALL_DIR}/lib64/*.egg-info")
and build again?
This will hopefully get you past the current build error. I'll
investigate
why
python is being installed in install/lib64 instead of install/lib.
Cory
On Tue, Jun 3, 2014 at 9:33 AM, Su, Simon M CTR USARMY ARL (US)
<simon.m.su.ctr at mail.mil> wrote:
Classification: UNCLASSIFIED
Caveats: NONE
Cory,
The find didn't find anything...
ssu:01% pwd
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install
ssu:01% find . -name *numpy*
find: No match.
But, the install directory has the following directories
bin etc include lib lib64 share var
and I believe numpy is in
ssu:01% pwd
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install/lib64/python2.6/site-packages
ssu:01% ll
total 8
drwx------ 18 ssu ssu 4096 May 30 11:41 numpy
-rw------- 1 ssu ssu 1658 May 30 11:41
numpy-1.6.2-py2.6.egg-info
lib64 only has a single python2.6 directory.... and all
others are
located in
lib directory.... is this going to be a problem?
Thanks
-simon
-----Original Message-----
From: Cory Quammen [mailto:cory.quammen at kitware.com]
Sent: Tuesday, June 03, 2014 9:25 AM
To: Su, Simon M CTR USARMY ARL (US)
Cc: ParaView
Subject: Re: [Paraview] ParaView superbuild matplotlib not
finding
numpy
(UNCLASSIFIED)
Simon,
That looks like what I would expect.
Next, could you navigate to
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install
and send me the results of running
find . -name *numpy*
Thanks,
Cory
On Tue, Jun 3, 2014 at 9:15 AM, Su, Simon M CTR USARMY ARL
(US)
<simon.m.su.ctr at mail.mil> wrote:
Classification: UNCLASSIFIED
Caveats: NONE
Hi Cory,
When I do a make numpy, this is what I got the
following.
In the pv-matplotlib-build.cmake file
attached, -DNUMPY_INSTALL_DIR
is
defined
as
-DNUMPY_INSTALL_DIR:PATH=/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install;
Thanks for your help
-simon
================ make numpy =========================
-- Enabling zlib since needed by:
boost;ffmpeg;freetype;hdf5;png;silo
-- Enabling boost as requested.
-- Enabling ffmpeg as requested.
-- Enabling freetype as requested.
-- Enabling libxml2 as requested.
-- Enabling fontconfig as requested.
-- Enabling szip as requested.
-- Enabling hdf5 as requested.
-- Enabling python as requested.
-- Enabling numpy as requested.
-- Enabling png as requested.
-- Enabling matplotlib as requested.
-- Enabling mpi as requested.
-- Enabling osmesa as requested.
-- Enabling qhull as requested.
-- Enabling silo as requested.
-- Enabling visitbridge as requested.
-- Enabling paraview as requested.
-- PROJECTS_ENABLED
zlib;boost;ffmpeg;freetype;libxml2;fontconfig;szip;hdf5;python;numpy;png;matplotlib;mpi;osmesa;qhull;silo;visitbridge;paraview
-- Configuring done
-- Generating done
-- Build files have been written to:
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build
[ 50%] Built target python
[100%] Built target numpy
=================================================================================
-----Original Message-----
From: Cory Quammen [mailto:cory.quammen at kitware.com]
Sent: Tuesday, June 03, 2014 8:50 AM
To: Su, Simon M CTR USARMY ARL (US)
Cc: ParaView
Subject: Re: [Paraview] ParaView superbuild
matplotlib not
finding
numpy
(UNCLASSIFIED)
Hi Simon,
You normally shouldn't have to point to the numpy
directory,
especially when
you are opting to build numpy, as your options show.
I wonder
if your
numpy
built successfully.
If you navigate to
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build
and run 'make numpy', does it succeed?
Also, what can you send me the file
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/pv-matplotlib-build.cmake?
There should be an option -DNUMPY_INSTALL_DIR:PATH in
the
command
variable.
Thanks,
Cory
On Mon, Jun 2, 2014 at 5:05 PM, Su, Simon M CTR
USARMY ARL
(US)
<simon.m.su.ctr at mail.mil> wrote:
Classification: UNCLASSIFIED
Caveats: NONE
Hello,
How do you specify to the superbuild process
when
building
'matplotlib',
where
numpy was built? I configured cmake using
the
following and
the
error
message at the end of the email
thanks
-simon
cmake \
-DCMAKE_INSTALL_PREFIX:PATH=${HOME}/pv-test/${version}_osmesa
\
-DCMAKE_BUILD_TYPE=Release \
-DParaView_FROM_GIT=ON \
-DENABLE_boost=ON \
-DENABLE_cgns=OFF \
-DENABLE_ffmpeg=ON \
-DENABLE_fontconfig=ON \
-DENABLE_freetype=ON \
-DENABLE_hdf5=ON \
-DENABLE_libxml2=ON \
-DENABLE_matplotlib=ON \
-DENABLE_mesa=OFF \
-DENABLE_mpi=ON \
-DENABLE_numpy=ON \
-DENABLE_osmesa=ON \
-DENABLE_paraview=ON \
-DENABLE_png=ON \
-DENABLE_python=ON \
-DENABLE_qhull=ON \
-DENABLE_qt=OFF \
-DENABLE_silo=ON \
-DENABLE_szip=ON \
-DENABLE_visitbridge=ON \
-DUSE_SYSTEM_mpi=ON \
-DUSE_SYSTEM_python=ON \
-DUSE_SYSTEM_zlib=ON \
../ParaViewSuperbuild_${version}
===================== error message
================================================
-- Enabling zlib since needed by:
boost;ffmpeg;freetype;hdf5;png;silo
-- Enabling boost as requested.
-- Enabling ffmpeg as requested.
-- Enabling freetype as requested.
-- Enabling libxml2 as requested.
-- Enabling fontconfig as requested.
-- Enabling szip as requested.
-- Enabling hdf5 as requested.
-- Enabling python as requested.
-- Enabling numpy as requested.
-- Enabling png as requested.
-- Enabling matplotlib as requested.
-- Enabling mpi as requested.
-- Enabling osmesa as requested.
-- Enabling qhull as requested.
-- Enabling silo as requested.
-- Enabling visitbridge as requested.
-- Enabling paraview as requested.
-- PROJECTS_ENABLED
zlib;boost;ffmpeg;freetype;libxml2;fontconfig;szip;hdf5;python;numpy;png;matplotlib;mpi;osmesa;qhull;silo;visitbridge;paraview
-- Configuring done
-- Generating done
-- Build files have been written to:
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install/lib64/python2.6/site-packages
[ 20%] [ 22%] [ 29%] [ 38%] [ 38%] [ 37%] [
40%] [
40%] Built
target
zlib
Built target szip
Built target python
Built target libxml2
Built target visitbridge
Built target osmesa
Built target mpi
Performing update step for 'qhull'
[ 49%] [ 55%] Built target freetype
[ 70%] [ 70%] [ 73%] [ 73%] Built target hdf5
Built target numpy
Built target png
Built target boost
Built target ffmpeg
[ 78%] Built target fontconfig
[ 81%] [ 84%] Built target silo
Performing build step for 'matplotlib'
LD_LIBRARY_PATH =
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install/lib:/opt/cray/shared-root/1.0-1.0402.46893.3.17.gem/lib64:/opt/cray/nodehealth/5.1-1.0402.45895.3.76.gem/lib64:/opt/cray/csa/3.0.0-1_2.0402.45268.1.90.gem/lib64:/opt/cray/job/1.5.5-0.1_2.0402.45272.1.5.gem/lib64:/opt/gcc/mpc/0.8.1/lib:/opt/gcc/mpfr/2.4.2/lib:/opt/gcc/gmp/4.3.2/lib:/opt/gcc/4.8.2/snos/lib64:/opt/cray/shared-root/1.0-1.0402.46893.3.17.gem/lib64:/opt/cray/nodehealth/5.1-1.0402.45895.3.76.gem/lib64:/opt/cray/csa/3.0.0-1_2.0402.45268.1.90.gem/lib64:/opt/cray/job/1.5.5-0.1_2.0402.45272.1.5.gem/lib64:/opt/gcc/mpc/0.8.1/lib:/opt/gcc/mpfr/2.4.2/lib:/opt/gcc/gmp/4.3.2/lib:/opt/gcc/4.8.2/snos/lib64
Already on 'master'
Your branch is up-to-date with
'origin/master'.
CMake Error at
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0/Projects/matplotlib.build.cmake:12
(message):
Failed to locate numpy-egg
CMake Error at
/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/pv-matplotlib-build.cmake:26
(message):
Failed!!!
make[2]: ***
[matplotlib/src/matplotlib-stamp/matplotlib-build] Error
1
make[1]: *** [CMakeFiles/matplotlib.dir/all]
Error 2
make[1]: *** Waiting for unfinished jobs....
[ 85%] Performing configure step for 'qhull'
Classification: UNCLASSIFIED
Caveats: NONE
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the
ParaView
Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
Classification: UNCLASSIFIED
Caveats: NONE
Classification: UNCLASSIFIED
Caveats: NONE
Classification: UNCLASSIFIED
Caveats: NONE
Classification: UNCLASSIFIED
Caveats: NONE
Classification: UNCLASSIFIED
Caveats: NONE
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 9990 bytes
Desc: not available
URL: <http://www.paraview.org/pipermail/paraview/attachments/20140604/ff76931c/attachment-0001.bin>
More information about the ParaView
mailing list