[Paraview] ParaView Web not compiling

Andy Bauer andy.bauer at kitware.com
Thu Aug 28 14:19:10 EDT 2014 

FYI: the error I get is for the configuration I emailed with previously was:
[ 99%] Compiling Python package 'web'
Listing /work/acbauer/MainPVDir/build/lib/site-packages/vtk/web ...
Compiling
/work/acbauer/MainPVDir/build/lib/site-packages/vtk/web/testing.py ...
SyntaxError: ('invalid syntax',
('/work/acbauer/MainPVDir/build/lib/site-packages/vtk/web/testing.py', 76,
47, 'TestModuleBrowsers = type("Enum", (), {k: i for i, k in
enumerate(test_module_browsers)})\n'))

This is for Python v2.6.8 which is the system version on Copper. I was able
to get it to build properly for a similar system (Garnet) with Python
v2.6.9, if that helps out.

Note that I think my full CMake options didn't make it in last time. They
are:
===========
cmake -DCMAKE_C_COMPILER:FILEPATH=/opt/gcc/4.8.2/bin/gcc \
    -DCMAKE_CXX_COMPILER:FILEPATH=/opt/gcc/4.8.2/bin/g++ \
    -DBUILD_SHARED_LIBS:BOOL=OFF \
    -DBUILD_TESTING:BOOL=OFF \
    -DCMAKE_BUILD_TYPE:STRING=Release \

-DOSMESA_INCLUDE_DIR:PATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/include
\

-DOSMESA_LIBRARY:FILEPATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/lib/libOSMesa.a
\
    -DVISIT_BUILD_READER_GMV:BOOL=OFF \
    -DENABLE_MPI4PY:BOOL=ON \
    -DPARAVIEW_ENABLE_PYTHON:BOOL=ON \
    -DPARAVIEW_USE_MPI:BOOL=ON \
    -DPARAVIEW_BUILD_QT_GUI:BOOL=OFF \

-DBoost_INCLUDE_DIR:PATH=/usr/local/usp/DAAC/paraview/source/PV4.2/tools/install/include
\
    -DPARAVIEW_USE_VISITBRIDGE:BOOL=ON \

-DMPI_C_INCLUDE_PATH:STRING=/opt/cray/mpt/6.0.0/gni/mpich2-gnu/48/include \

-DMPI_C_LIBRARIES:STRING=/opt/cray/mpt/6.0.0/gni/mpich2-gnu/48/lib/libmpich_gnu_48.so
\
    -DOPENGL_gl_LIBRARY:FILEPATH= \

-DOPENGL_glu_LIBRARY:FILEPATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/lib/libGLU.a
\

-DOPENGL_INCLUDE_DIR:PATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/include
\
    -DVTK_USE_OFFSCREEN:BOOL=ON \
    -DVTK_OPENGL_HAS_OSMESA:BOOL=ON \
    -DVTK_USE_X:BOOL=OFF  \
    -DPARAVIEW_BUILD_PLUGIN_AdiosReader:BOOL=FALSE \
    -DPARAVIEW_BUILD_PLUGIN_AnalyzeNIfTIIO:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_ArrowGlyph:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_EyeDomeLighting:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_ForceTime:BOOL=FALSE \
    -DPARAVIEW_BUILD_PLUGIN_GMVReader:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_H5PartReader:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_InSituExodus:BOOL=FALSE \
    -DPARAVIEW_BUILD_PLUGIN_Moments:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_Nektar:BOOL=FALSE \
    -DPARAVIEW_BUILD_PLUGIN_NonOrthogonalSource:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_PacMan:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_PointSprite:BOOL=TRUE \
    -DPARAVIEW_BUILD_PLUGIN_QuadView:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_RGBZView:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_SLACTools:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_SciberQuestToolKit:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_SierraPlotTools:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_StreamingParticles:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_SurfaceLIC:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_UncertaintyRendering:BOOL=OFF \
    -DPARAVIEW_BUILD_PLUGIN_VaporPlugin:BOOL=FALSE \
    -DPYTHON_INCLUDE_DIR:PATH=/usr/include/python2.6 \
    -DPYTHON_LIBRARY:FILEPATH=/usr/lib64/libpython2.6.so \
    -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python \
    -DPARAVIEW_ENABLE_WEB:BOOL=OFF \
    -DCMAKE_INSTALL_PREFIX:PATH=$INSTALLDIR \
    ../ParaView
================


On Thu, Aug 28, 2014 at 1:32 PM, Sebastien Jourdain <
sebastien.jourdain at kitware.com> wrote:

> Are you targeting ParaViewWeb server on your Cray? If not, you can safely
> disable it.
>
> Otherwise, you may need to build your own Python along ParaView like we do
> in our ParaView binaries.
>
> Seb
>
>
> On Thu, Aug 28, 2014 at 11:18 AM, Su, Simon M CTR USARMY ARL (US) <
> simon.m.su.ctr at mail.mil> wrote:
>
>>  Sorry to have call qt out... I also think it is Python.. I have Python
>> 2.6.6 on my desktop and
>> Python 2.6.9 on the new crays (lightning) at afrl that I am running the
>> build.
>>
>> If Python 2.7 is a must, is there a work around? I doubt that they will
>> update python on the crays just because I asked.... :)
>>
>> but garnet also has Python 2.6.9 and Andy was able to build ok? Andy?
>>
>> ============================= error on crays with mesa build ==========
>>
>> [  5%] Compiling Python package 'web'
>> Listing
>> /home/ssu/build/paraview-current/Build_2014-08-28_mesa/ParaViewSuperbuild_2014-08-28-build/paraview/src/paraview-build/lib/site-packages/vtk/web
>> ...
>> Compiling
>> /home/ssu/build/paraview-current/Build_2014-08-28_mesa/ParaViewSuperbuild_2014-08-28-build/paraview/src/paraview-build/lib/site-packages/vtk/web/testing.py
>> ...
>> SyntaxError: ('invalid syntax',
>> ('/home/ssu/build/paraview-current/Build_2014-08-28_mesa/ParaViewSuperbuild_2014-08-28-build/paraview/src/paraview-build/lib/site-packages/vtk/web/testing.py',
>> 76, 47, 'TestModuleBrowsers = type("Enum", (), {k: i for i, k in
>> enumerate(test_module_browsers)})\n'))
>>
>> gmake[5]: *** [VTK/Web/Python/web.build-complete] Error 1
>> gmake[4]: *** [VTK/Web/Python/CMakeFiles/vtkWebPython.dir/all] Error 2
>> gmake[4]: *** Waiting for unfinished jobs....
>>
>>
>>
>>  ------------------------------
>> *From:* ParaView [paraview-bounces at paraview.org] on behalf of Sebastien
>> Jourdain [sebastien.jourdain at kitware.com]
>> *Sent:* Thursday, August 28, 2014 1:11 PM
>> *To:* Utkarsh Ayachit
>> *Cc:* paraview at paraview.org
>> *Subject:* Re: [Paraview] ParaView Web not compiling
>>
>>   Just out of curiosity, do you try to build ParaView with Python 2.6?
>>
>>  If that's the case, that could make sense as ParaViewWeb require Python
>> 2.7 but I've only saw that error at run time.
>>
>>  Seeing the error could certainly help.
>>
>>  Seb
>>
>>
>> On Thu, Aug 28, 2014 at 11:00 AM, Utkarsh Ayachit <
>> utkarsh.ayachit at kitware.com> wrote:
>>
>>> Andy,
>>>
>>> Can you elaborate on what the errors were? We should fix those.
>>>
>>> Utkarsh
>>>
>>> On Thu, Aug 28, 2014 at 12:57 PM, Andy Bauer <andy.bauer at kitware.com>
>>> wrote:
>>> > I was getting similar errors on a Cray machine. It seemed to be Python
>>> > related, if I remember correctly. When I turned off building ParaView
>>> Web it
>>> > went away. For me it was building without the Qt GUI. My CMake
>>> settings for
>>> > the build were:
>>> > =========
>>> > cmake -DCMAKE_C_COMPILER:FILEPATH=/
>>> > opt/gcc/4.8.2/bin/gcc \
>>> >     -DCMAKE_CXX_COMPILER:FILEPATH=/opt/gcc/4.8.2/bin/g++ \
>>> >     -DBUILD_SHARED_LIBS:BOOL=OFF \
>>> >     -DBUILD_TESTING:BOOL=OFF \
>>> >     -DCMAKE_BUILD_TYPE:STRING=Release \
>>> >     -DOSMESA_INCLUDE_DIR:PATH=/
>>> > usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/include \
>>> >
>>> >
>>> -DOSMESA_LIBRARY:FILEPATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/lib/libOSMesa.a
>>> > \
>>> >
>>> >     -DVISIT_BUILD_READER_GMV:BOOL=OFF \
>>> >     -DENABLE_MPI4PY:BOOL=ON \
>>> >     -DPARAVIEW_ENABLE_PYTHON:BOOL=ON \
>>> >     -DPARAVIEW_USE_MPI:BOOL=ON \
>>> >     -DPARAVIEW_BUILD_QT_GUI:BOOL=OFF \
>>> >
>>> >
>>> -DBoost_INCLUDE_DIR:PATH=/usr/local/usp/DAAC/paraview/source/PV4.2/tools/install/include
>>> > \
>>> >
>>> >     -DPARAVIEW_USE_VISITBRIDGE:BOOL=ON \
>>> >
>>> >
>>> -DMPI_C_INCLUDE_PATH:STRING=/opt/cray/mpt/6.0.0/gni/mpich2-gnu/48/include \
>>> >
>>> >
>>> -DMPI_C_LIBRARIES:STRING=/opt/cray/mpt/6.0.0/gni/mpich2-gnu/48/lib/libmpich_gnu_48.so
>>> > \
>>> >     -DOPENGL_gl_LIBRARY:FILEPATH= \
>>> >
>>> >
>>> -DOPENGL_glu_LIBRARY:FILEPATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/lib/libGLU.a
>>> > \
>>> >
>>> >
>>> -DOPENGL_INCLUDE_DIR:PATH=/usr/local/usp/DAAC/paraview/source/PV4.2/cross/install/include
>>> > \     -DPARAVIEW_ENABLE_WEB:BOOL=OFF \
>>> >     -DCMAKE_INSTALL_PREFIX:PATH=$INSTALLDIR \
>>> >     ../ParaView
>>> > ============
>>> >
>>> >
>>> >
>>> > On Thu, Aug 28, 2014 at 12:51 PM, Utkarsh Ayachit
>>> > <utkarsh.ayachit at kitware.com> wrote:
>>> >>
>>> >> Simon,
>>> >>
>>> >> What errors are you getting? It is definitely a temporary issue and
>>> >> will be fixed, however we're not seeing it on the dashboards so would
>>> >> help to see the errors. Qt version is certainly not the issue. 4.8.5
>>> >> is indeed supported Disabling Web will not affect catalyst. The
>>> >> ParaViewWeb+Catalyst demo also is a little independent since the
>>> >> catalyst part in that case doesn't really need the web components.
>>> >>
>>> >> Utkarsh
>>> >>
>>> >>
>>> >> On Thu, Aug 28, 2014 at 12:22 PM, Su, Simon M CTR USARMY ARL (US)
>>> >> <simon.m.su.ctr at mail.mil> wrote:
>>> >> > Hello,
>>> >> >
>>> >> > while compiling the latest ParaView for git (4.1.0-1560-gf37ec5f) -
>>> not
>>> >> > superbuild, I am not able to make it through all the way if I don't
>>> >> > disable
>>> >> > ParaView web using  -DPARAVIEW_ENABLE_WEB:BOOL=OFF on my cmake line.
>>> >> >
>>> >> > Is qt version (I am using qt version 4.8.5) an issue here? If so,
>>> what
>>> >> > is
>>> >> > the qt version that I should be using?  or this is just a temporary
>>> >> > state
>>> >> > that will eventually go away in the next PV release?
>>> >> >
>>> >> > If I turn off ParaView web, what feature will not be available? Will
>>> >> > catalyst be affected? I saw a demo once of catalyst via ParaView
>>> web.
>>> >> >
>>> >> > thanks
>>> >> > -simon
>>> >> >
>>> >> > _______________________________________________
>>> >> > Powered by www.kitware.com
>>> >> >
>>> >> > Visit other Kitware open-source projects at
>>> >> > http://www.kitware.com/opensource/opensource.html
>>> >> >
>>> >> > Please keep messages on-topic and check the ParaView Wiki at:
>>> >> > http://paraview.org/Wiki/ParaView
>>> >> >
>>> >> > Follow this link to subscribe/unsubscribe:
>>> >> > http://public.kitware.com/mailman/listinfo/paraview
>>> >> >
>>> >> _______________________________________________
>>> >> Powered by www.kitware.com
>>> >>
>>> >> Visit other Kitware open-source projects at
>>> >> http://www.kitware.com/opensource/opensource.html
>>> >>
>>> >> Please keep messages on-topic and check the ParaView Wiki at:
>>> >> http://paraview.org/Wiki/ParaView
>>> >>
>>> >> Follow this link to subscribe/unsubscribe:
>>> >> http://public.kitware.com/mailman/listinfo/paraview
>>> >
>>> >
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://public.kitware.com/mailman/listinfo/paraview
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20140828/d81fbb3e/attachment.html>

More information about the ParaView mailing list