[Paraview] paraviewweb portability question

Fri Nov 15 14:58:46 EST 2013

Here is the stdout from the CentOS attempts:

4.0.1 - works; stdout/err:
2013-11-15 12:53:34-0700 [-] Log opened.
2013-11-15 12:53:34-0700 [-] Site starting on 8080
2013-11-15 12:53:34-0700 [-] Starting factory <twisted.web.server.Site
instance at 0x2e8a200>
2013-11-15 12:53:40-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:53:39 +0000] "GET / HTTP/1.1" 200 1142 "-"
"Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.22 (KHTML, like
Gecko) Chrome/25.0.1364.152 Safari/537.22"
2013-11-15 12:53:41-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:53:41 +0000] "GET /apps/ HTTP/1.1" 200 1336
"http://localhost:8080/" "Mozilla/5.0 (X11; Linux x86_64)
AppleWebKit/537.22 (KHTML, like Gecko) Chrome/25.0.1364.152
Safari/537.22"
2013-11-15 12:53:43-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:53:42 +0000] "POST /paraview HTTP/1.1" 404 145
"http://localhost:8080/apps/WebVisualizer/" "Mozilla/5.0 (X11; Linux
x86_64) AppleWebKit/537.22 (KHTML, like Gecko) Chrome/25.0.1364.152
Safari/537.22"
OpenGL Warning: Failed to connect to host. Make sure 3D acceleration
is enabled for this VM.
2013-11-15 12:53:43-0700 [HTTPChannel,6,127.0.0.1] Client has
reconnected, cancelling reaper
2013-11-15 12:53:43-0700 [HTTPChannel,6,127.0.0.1] on_connect:
connection count = 1
2013-11-15 12:53:54-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:53:53 +0000] "DELETE
/apps/WebVisualizer/undefined/undefined HTTP/1.1" 404 145
"http://localhost:8080/apps/WebVisualizer/" "Mozilla/5.0 (X11; Linux
x86_64) AppleWebKit/537.22 (KHTML, like Gecko) Chrome/25.0.1364.152
Safari/537.22"
2013-11-15 12:53:54-0700 [HTTPChannel,6,127.0.0.1] connection_lost:
connection count = 0
2013-11-15 12:53:54-0700 [HTTPChannel,6,127.0.0.1] Starting timer,
process will terminate in: 300sec

4.1.0-RC1 - fails; stdout/err:
2013-11-15 12:55:16-0700 [-] Log opened.
2013-11-15 12:55:16-0700 [-] Site starting on 8080
2013-11-15 12:55:16-0700 [-] Starting factory <twisted.web.server.Site
instance at 0x45d9098>
2013-11-15 12:55:28-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:55:27 +0000] "GET / HTTP/1.1" 200 1142 "-"
"Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.22 (KHTML, like
Gecko) Chrome/25.0.1364.152 Safari/537.22"
2013-11-15 12:55:29-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:55:29 +0000] "GET /apps/ HTTP/1.1" 200 1447
"http://localhost:8080/" "Mozilla/5.0 (X11; Linux x86_64)
AppleWebKit/537.22 (KHTML, like Gecko) Chrome/25.0.1364.152
Safari/537.22"
2013-11-15 12:55:31-0700 [HTTPChannel,0,127.0.0.1] 127.0.0.1 - -
[15/Nov/2013:19:55:30 +0000] "POST /paraview HTTP/1.1" 404 145
"http://localhost:8080/apps/Visualizer/" "Mozilla/5.0 (X11; Linux
x86_64) AppleWebKit/537.22 (KHTML, like Gecko) Chrome/25.0.1364.152
Safari/537.22"
OpenGL Warning: Failed to connect to host. Make sure 3D acceleration
is enabled for this VM.
2013-11-15 12:55:31-0700 [HTTPChannel,6,127.0.0.1] Client has
reconnected, cancelling reaper
2013-11-15 12:55:31-0700 [HTTPChannel,6,127.0.0.1] on_connect:
connection count = 1
2013-11-15 12:55:40-0700 [HTTPChannel,6,127.0.0.1] connection_lost:
connection count = 0
2013-11-15 12:55:40-0700 [HTTPChannel,6,127.0.0.1] Starting timer,
process will terminate in: 300sec
2013-11-15 12:55:40-0700 [twisted.web.server.Site] (TCP Port 8080 Closed)
2013-11-15 12:55:40-0700 [twisted.web.server.Site] Stopping factory
<twisted.web.server.Site instance at 0x45d9098>
2013-11-15 12:55:40-0700 [-] Main loop terminated.

On Fri, Nov 15, 2013 at 12:47 PM, Sebastien Jourdain
<sebastien.jourdain at kitware.com> wrote:
> Thanks,
>
> and no error when you click on the file...
> All the current error regarding /paraview is related to the fact that it
> tries to request a new process launch using a session manager.
> Which you don't have as you run the server application directly.
>
> But I don't see anything related to the file loading issue. And in the
> standard output of the pvpython process, you don't see anything?
>
> Thanks,
>
> Seb
>
>
> On Fri, Nov 15, 2013 at 12:37 PM, J. Calahan <jcalahan at gmail.com> wrote:
>>
>> On CentOS6.3, Chrome 25.0.1364.152
>>
>> 4.0.1 - works; console logs:
>> Failed to load resource: the server responded with a status of 404
>> (Not Found) http://localhost:8080/paraview
>>
>> 4.1.0-RC1 - fails; console logs:
>> POST http://localhost:8080/paraview 404 (Not Found) jquery-1.8.3.min.js:2
>> send jquery-1.8.3.min.js:2
>> v.extend.ajax jquery-1.8.3.min.js:2
>> start vtkweb-all.js:339
>> module.start vtkweb-all.js:400
>> autoConnect vtkweb-all.js:3517
>> module.smartConnect vtkweb-all.js:3581
>> (anonymous function) localhost:139
>> Try to connect using the direct WS url vtkweb-all.js:3528
>>
>>
>> On OSX10.7.5, Chrome 31.0.1650.48
>>
>> 4.0.1 - fails; console logs:
>> Caught exception while registering module: vtkWeb is not defined
>> paraview.ui.pipeline.js:2235
>> Caught exception while registering module: vtkWeb is not defined
>> paraview.ui.toolbar.js:54
>> Caught exception while registering module: vtkWeb is not defined
>> paraview.ui.toolbar.vcr.js:158
>> Caught exception while registering module: vtkWeb is not defined
>> paraview.ui.toolbar.viewport.js:147
>> Caught exception while registering module: vtkWeb is not defined
>> paraview.ui.toolbar.connect.js:194
>> Failed to load resource: the server responded with a status of 404
>> (Not Found) http://localhost:8080/paraview
>> event.returnValue is deprecated. Please use the standard
>> event.preventDefault() instead.
>>
>> 4.1.0-RC1 - works; console logs:
>> Failed to load resource: the server responded with a status of 404
>> (Not Found) http://localhost:8080/paraview
>> Try to connect using the direct WS url vtkweb-all.js:3528
>> event.returnValue is deprecated. Please use the standard
>> event.preventDefault() instead.
>>
>> On Fri, Nov 15, 2013 at 12:13 PM, Sebastien Jourdain
>> <sebastien.jourdain at kitware.com> wrote:
>> > Hum, this is weird… What browser are you using?
>> >
>> > Can you enable the javascript console to see if you notice error?
>> >
>> > Seb
>> >
>> >
>> > On Fri, Nov 15, 2013 at 12:10 PM, J. Calahan <jcalahan at gmail.com> wrote:
>> >>
>> >> Hi Sebastien,
>> >>
>> >> Thank you for the quick response.
>> >>
>> >> To load the can.ex2 data set I'm following http://vimeo.com/77824433
>> >> step-for-step. It's when I click on the filename that nothing seems to
>> >> happen in the 3D view. Similarly, when I click the + button and add,
>> >> say, a sphere nothing seems to happen.
>> >>
>> >> Josh
>> >>
>> >> On Fri, Nov 15, 2013 at 11:51 AM, Sebastien Jourdain
>> >> <sebastien.jourdain at kitware.com> wrote:
>> >> > Hi Josh,
>> >> >
>> >> > thanks for your feedback evaluation.
>> >> >
>> >> > Sorry for the confusion on the wiki but as you mentioned the text is
>> >> > valid
>> >> > for the latest release but not consistent with git master.
>> >> > I'll do a pass to update it.
>> >> >
>> >> > For the windows package, it is true that we still need to fix the
>> >> > install
>> >> > tree.
>> >> > Will do it before the official ParaView release.
>> >> >
>> >> > Regarding the issue where the data does not load, I'm a bit confused
>> >> > on
>> >> > what
>> >> > you are exactly doing to load that can.ex2.
>> >> > Is the issue that when you open the file browser, you can not select
>> >> > the
>> >> > file or when you click on the file nothing happen?
>> >> >
>> >> > Seb
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > On Fri, Nov 15, 2013 at 11:29 AM, J. Calahan <jcalahan at gmail.com>
>> >> > wrote:
>> >> >>
>> >> >> Hello,
>> >> >>
>> >> >> I'm evaluating ParaViewWeb as part of the ParaView 4.0 release and
>> >> >> the
>> >> >> 4.x nightly Git builds.
>> >> >>
>> >> >> The current contents of http://www.paraview.org/Wiki/ParaViewWeb are
>> >> >> a
>> >> >> bit stale as it still mentions pipeline_manager.py (removed in
>> >> >> commit
>> >> >> bbb9a40). It took me a while to figure out how to execute the web
>> >> >> visualizer with 4.1-RC1 and the nightlies. For the record this works
>> >> >> for 4.0.1:
>> >> >>
>> >> >>  ~$ pvpython paraview/pipeline_manager.py --content www --data-dir
>> >> >> $PARAVIEW_DATA
>> >> >>
>> >> >> And this is the syntax past that version:
>> >> >>
>> >> >>  ~$ pvpython paraview/web/pv_web_visualizer.py --content www
>> >> >> --data-dir $PARAVIEW_DATA
>> >> >>  ~$ pvpython paraview/web/pv_web_file_loader.py --content www
>> >> >> --data-dir $PARAVIEW_DATA
>> >> >>  ...
>> >> >>
>> >> >> I've noticed a few platform differences when trying to display the
>> >> >> can.ex2 data set and from adding, say, sphere geometry.
>> >> >>
>> >> >> CentOS6.4
>> >> >> - 4.0.1 displays data set fine
>> >> >> - 4.1-RC1 webapp came up, but did not display data set
>> >> >> - 4.x-64bit-glibc-2.3.6-NIGHTLY-20131113 webapp came up, but did not
>> >> >> display data set
>> >> >> - 4.x-64bit-glibc-2.3.6-NIGHTLY-20131115 webapp came up, but did not
>> >> >> display data set
>> >> >>
>> >> >> OSX10.7
>> >> >> - 4.0.1 webapp came up, but did not display data set
>> >> >> - 4.1-RC1 displays data set fine
>> >> >> - 4.x-NIGHTLY-20131113 displays data set fine
>> >> >>
>> >> >> Win7
>> >> >> - 4.0.1 webapp UI wedges after "WebVisualizer" link is clicked
>> >> >> - 4.1-RC1 share/paraview-4.1/www is not present
>> >> >> - 4.x-NIGHTLY-20131113 share/paraview-4.*/www is not present
>> >> >>
>> >> >> I'm not that interested in Windows (just tried it out of curiosity);
>> >> >> my interest is primarily Linux, then OSX, with the nightly builds.
>> >> >>
>> >> >> In the cases where no geometry is displayed I can still interactive
>> >> >> with the view... rotating w/ mouse and observing axis movement. Also
>> >> >> I
>> >> >> don't see any stdout/err difference between the versions that work
>> >> >> and
>> >> >> the versions that do not. Any pointers on getting it to work?
>> >> >>
>> >> >> Thanks,
>> >> >> Josh
>> >> >> _______________________________________________
>> >> >> Powered by www.kitware.com
>> >> >>
>> >> >> Visit other Kitware open-source projects at
>> >> >> http://www.kitware.com/opensource/opensource.html
>> >> >>
>> >> >> Please keep messages on-topic and check the ParaView Wiki at:
>> >> >> http://paraview.org/Wiki/ParaView
>> >> >>
>> >> >> Follow this link to subscribe/unsubscribe:
>> >> >> http://www.paraview.org/mailman/listinfo/paraview
>> >> >
>> >> >
>> >
>> >
>
>