[Paraview] CGNS Reader

Thu Aug 8 13:15:01 EDT 2013

Fair enough   8-)

________________________________
Rick Angelini

USArmy Research Laboratory
CISD/HPC Architectures Team
Building 120 Cube 315
Phone:  410-278-6266
________________________________
From: Moreland, Kenneth [kmorel at sandia.gov]
Sent: Thursday, August 08, 2013 12:57 PM
To: Angelini, Richard C (Rick) CIV USARMY ARL (US); Robert Maynard
Cc: paraview at paraview.org
Subject: Re: [Paraview] CGNS Reader

I agree that CMake should do something when you turn on ENABLE_cgns.  I would advocate rather than blindly turning on ENABLE_visitbridge (which could have other consequences) that it instead outputs a warning explaining that ENABLE_cgns has no effect if ENABLE_visitbridge is off.

-Ken

From: <Angelini>, "Richard C CIV USARMY ARL (RickUS)" <richard.c.angelini.civ at mail.mil<mailto:richard.c.angelini.civ at mail.mil>>
Date: Thursday, August 8, 2013 9:10 AM
To: Robert Maynard <robert.maynard at kitware.com<mailto:robert.maynard at kitware.com>>
Cc: "paraview at paraview.org<mailto:paraview at paraview.org>" <paraview at paraview.org<mailto:paraview at paraview.org>>
Subject: [EXTERNAL] Re: [Paraview] CGNS Reader

So - if someone chooses to set the ENABLE_cgns flag (as I was doing) should the cmake rules automatically set the ENABLE_visitbridge flag?     I was setting the CGNS and assuming (without actually testing) that I was getting the cgns reader.

________________________________
Rick Angelini

USArmy Research Laboratory
CISD/HPC Architectures Team
Building 120 Cube 315
Phone:  410-278-6266
________________________________
From: paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org> [paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org>] on behalf of Robert Maynard [robert.maynard at kitware.com<mailto:robert.maynard at kitware.com>]
Sent: Thursday, August 08, 2013 10:58 AM
To: Angelini, Richard C (Rick) CIV USARMY ARL (US)
Cc: paraview at paraview.org<mailto:paraview at paraview.org>
Subject: Re: [Paraview] CGNS Reader

If you enable visitbridge without enabling cgns we won't build the visit cgns reader. This was done to allow people to selectively choose what readers that require extra external libraries they wish to build.

On Thu, Aug 8, 2013 at 10:53 AM, Angelini, Richard C (Rick) CIV USARMY ARL (US) <richard.c.angelini.civ at mail.mil<mailto:richard.c.angelini.civ at mail.mil>> wrote:
So, is there any value in this flag:

-DENABLE_cgns=ON

if we're using the ENABLE_visitbridge flag?

________________________________
Rick Angelini

USArmy Research Laboratory
CISD/HPC Architectures Team
Building 120 Cube 315
Phone:  410-278-6266<tel:410-278-6266>

________________________________________
From: paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org> [paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org>] on behalf of Utkarsh Ayachit [utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>]
Sent: Thursday, August 08, 2013 10:23 AM
To: Angelini, Richard C (Rick) CIV USARMY ARL (US)
Cc: paraview at paraview.org<mailto:paraview at paraview.org>
Subject: Re: [Paraview] CGNS Reader

Rick,

Yea, you don't need any separate build of VisIt, by turning on
ENABLE_visitbridge, ParaViewSuperbuild builds all the components
needed (including parts of VisIt). BTW, you don't neeed to ensure
ENABLE_boost is ON either (contrary to what Dave suggested). If
ENABLE_visitbridge is ON, ParaViewSuperbuid will automatically turn on
ENABLE_boost during its dependency determination pass.

Utkarsh

On Thu, Aug 8, 2013 at 8:13 AM, Angelini, Richard C (Rick) CIV USARMY
ARL (US) <richard.c.angelini.civ at mail.mil<mailto:richard.c.angelini.civ at mail.mil>> wrote:
> OK - maybe I'm taking this too literally.  Does the VisIt_Bridge actually
> link against the VisIt libraries?    I built and compiled with the
> ENABLE_visitbridge turned on and I somehow ended up with a working CGNS
> reader.    But at no point did I specify any paths to my VisIt installation
> .....   8-)
>
>
>
> ________________________________
> Rick Angelini
>
> USArmy Research Laboratory
> CISD/HPC Architectures Team
> Building 120 Cube 315
> Phone:  410-278-6266<tel:410-278-6266>
> ________________________________
> From: paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org> [paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org>] on
> behalf of David E DeMarle [dave.demarle at kitware.com<mailto:dave.demarle at kitware.com>]
> Sent: Wednesday, August 07, 2013 4:39 PM
>
> To: Angelini, Richard C (Rick) CIV USARMY ARL (US)
> Cc: paraview at paraview.org<mailto:paraview at paraview.org>
> Subject: Re: [Paraview] CGNS Reader
>
> I think the only extra flag will be make sure boost is one of the projects
> superbuild makes. When superbuild makes paraview it will see this and then
> turn visitbridge on and link it in when it configures paraview.
>
> Robert probably knows best the state of this particular file format.
>
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909<tel:518-881-4909>
>
>
> On Wed, Aug 7, 2013 at 3:56 PM, Angelini, Richard C (Rick) CIV USARMY ARL
> (US) <richard.c.angelini.civ at mail.mil<mailto:richard.c.angelini.civ at mail.mil>> wrote:
>>
>> I was afraid you say that!   8-)
>>
>> So, are there any additional parameters that need to be set, such as where
>> the VisIt libraries are installed, etc?   In the Superbuild, I've looked in
>> the CMakeCache.txt file, and I don't see any additional parameters for the
>> bridge or for cgns.
>>
>> Is this page still current and correct?
>> http://www.paraview.org/Wiki/VisIt_Database_Bridge#CGNS_Support
>>
>>
>>
>> ________________________________
>> Rick Angelini
>>
>> USArmy Research Laboratory
>> CISD/HPC Architectures Team
>> Building 120 Cube 315
>> Phone:  410-278-6266<tel:410-278-6266>
>>
>> ________________________________________
>> From: Utkarsh Ayachit [utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>]
>> Sent: Wednesday, August 07, 2013 3:25 PM
>> To: Angelini, Richard C (Rick) CIV USARMY ARL (US)
>> Cc: paraview at paraview.org<mailto:paraview at paraview.org>
>> Subject: Re: [Paraview] CGNS Reader
>>
>> Rick,
>>
>> Correct, VisItBridge is required for CGNS support. You can turn on
>> VisItBridge by using the ENABLE_visitbridge cmake option.
>>
>> Utkarsh
>>
>> On Wed, Aug 7, 2013 at 3:05 PM, Angelini, Richard C (Rick) CIV USARMY
>> ARL (US) <richard.c.angelini.civ at mail.mil<mailto:richard.c.angelini.civ at mail.mil>> wrote:
>> > I'm using the Superbuild to build ParaView 4.0.1 .... and I'm enabling
>> > CGNS
>> > but the reader doesn't seem to be there.   I can see that it downloaded
>> > at
>> > cgnslib tarball and it seems to have been built.    I poked around on
>> > the
>> > Wiki and there's also a mention of using the VisIt bridge.     Is the
>> > VisIt
>> > bridge (which I'm not using) the only way to read a CGNS file?
>> >
>> >
>> >
>> > ________________________________
>> > Rick Angelini
>> >
>> > USArmy Research Laboratory
>> > CISD/HPC Architectures Team
>> > Building 120 Cube 315
>> > Phone:  410-278-6266<tel:410-278-6266>
>> >
>> > _______________________________________________
>> > Powered by www.kitware.com<http://www.kitware.com>
>> >
>> > Visit other Kitware open-source projects at
>> > http://www.kitware.com/opensource/opensource.html
>> >
>> > Please keep messages on-topic and check the ParaView Wiki at:
>> > http://paraview.org/Wiki/ParaView
>> >
>> > Follow this link to subscribe/unsubscribe:
>> > http://www.paraview.org/mailman/listinfo/paraview
>> >
>> _______________________________________________
>> Powered by www.kitware.com<http://www.kitware.com>
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview
>
>
>
> _______________________________________________
> Powered by www.kitware.com<http://www.kitware.com>
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>
_______________________________________________
Powered by www.kitware.com<http://www.kitware.com>

Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com<http://www.kitware.com>

Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20130808/2e07c10e/attachment.htm>