[Paraview] Build errors due to missing OSMesa include directory

Tue Aug 6 14:48:25 EDT 2013

That's a good reason to do so, ;-) I think I've always (PV > 3.10) set 
opengl_gl_library pointing to os mesa library... Some of the info on 
those pages is out dated, my mesa configure lines look a bit different too.

Good luck, be sure to report back what finally works for you.

Burlen

On 08/06/2013 11:29 AM, Paul Melis wrote:
> Hi Burlen,
>
> I explicitly don't set the opengl_gl_library value as per these instructions (3rd option, pure offscreen rendering): http://www.paraview.org/Wiki/ParaView/Users_Guide/Parallel_Rendering
>
> I'll see tomorrow if setting that value to the osmesa libs helps. I would like to ditch the  mpi compiler wrappers, will check that out too
>
> Paul
> ________________________________________
> From: Burlen Loring [bloring at lbl.gov]
> Sent: Tuesday, August 06, 2013 19:05
> To: Paul Melis
> Cc: paraview at paraview.org
> Subject: Re: [Paraview] Build errors due to missing OSMesa include directory
>
> Hi Paul,
>
> Could it be that you didn't set OPENGL_gl_LIBRARY library? At least
> that's one difference I see between your config and mine. See the
> following cmake config, which works for me with 3.98.1.
>
> this maybe unrelated to your current problems, but there's no compelling
> reason to use the MPI compiler wrappers. It should work, but in practice
> sometimes it leads to odd issues. At least that's my experience. So I'd
> say that if you don't want to be debugging wierd issues use an actual
> cxx compiler. Intel's compilers work fine with PV.
>
> #!/bin/bash
> MESA=/work/apps/mesa-dev/
> cmake \
> ...
>     -DVTK_USE_X=OFF \
>     -DVTK_OPENGL_HAS_OSMESA=ON \
>     -DOPENGL_INCLUDE_DIR=$MESA/include \
>     -DOPENGL_gl_LIBRARY=$MESA/lib/libOSMesa32.so \
>     -DOPENGL_glu_LIBRARY="" \
>     -DOPENGL_glut_LIBRARY="" \
>     -DGLUT_glut_LIBRARY="" \
>     -DGLUT_INCLUDE_DIR="" \
>     -DGLUT_Xi_LIBRARY="" \
>     -DGLUT_Xmu_LIBRARY="" \
>     -DGLUT_glut_LIBRARY="" \
>     -DOPENGL_xmesa_INCLUDE_DIR=$MESA/include \
>     -DOSMESA_INCLUDE_DIR=$MESA/include \
>     -DOSMESA_LIBRARY=$MESA/lib/libOSMesa32.so \
> ...
>     $*
>
> On 08/06/2013 08:33 AM, Paul Melis wrote:
>> Hi,
>>
>> I get build errors with 3.98.1 and the following config command:
>>
>> $HOME/software/cmake-2.8.11.2/bin/cmake \
>>      -DCMAKE_C_COMPILER=/opt/intel/impi/4.1.0.024/bin64/mpicc \
>>      -DCMAKE_CXX_COMPILER=/opt/intel/impi/4.1.0.024/bin64/mpicxx \
>>      -DCMAKE_INSTALL_PREFIX=$HOME/software/paraview-osmesa-3.98.1 \
>>      -DCMAKE_BUILD_TYPE=Release \
>>      -DPARAVIEW_BUILD_QT_GUI=OFF \
>>      -DPARAVIEW_USE_MPI=ON \
>>      -DPARAVIEW_ENABLE_PYTHON=ON \
>>      -DPARAVIEW_INSTALL_DEVELOPMENT_FILES=ON \
>>      -DVTK_USE_MPI=ON \
>>      -DVTK_USE_X=OFF \
>>      -DVTK_USE_OFFSCREEN=ON \
>>      -DVTK_OPENGL_HAS_OSMESA=ON \
>> -DVTK_MPIRUN_EXE:FILEPATH=/opt/intel/impi/4.1.0.024/bin64/mpirun \
>>      -DOSMESA_INCLUDE_DIR=$HOME/software/osmesa-7.9.2/include \
>>      -DOPENGL_INCLUDE_DIR=$HOME/software/osmesa-7.9.2/include \
>>      -DOPENGL_gl_LIBRARY="" \
>>      -DOPENGL_glu_LIBRARY=$HOME/software/osmesa-7.9.2/lib/libGLU.so \
>>      -DOSMESA_LIBRARY=$HOME/software/osmesa-7.9.2/lib/libOSMesa.so \
>>      ../ParaView-3.98.1-source
>>
>> Seems to be due to OPENGL_INCLUDE_DIR not being used in all the right
>> places. The correct include path is present in the cache:
>>
>> [paulm at int2 t]$ grep osmesa-7.9.2 CMakeCache.txt
>> IceTGL_LIB_DEPENDS:STATIC=general;m;general;IceTCore;general;/home/paulm/software/osmesa-7.9.2/lib/libOSMesa.so;
>>
>> OPENGL_INCLUDE_DIR:PATH=/home/paulm/software/osmesa-7.9.2/include
>> OPENGL_glu_LIBRARY:FILEPATH=/home/paulm/software/osmesa-7.9.2/lib/libGLU.so
>>
>> OSMESA_INCLUDE_DIR:UNINITIALIZED=/home/paulm/software/osmesa-7.9.2/include
>>
>> OSMESA_LIBRARY:UNINITIALIZED=/home/paulm/software/osmesa-7.9.2/lib/libOSMesa.so
>>
>> vtkRenderingOpenGL_LIB_DEPENDS:STATIC=general;vtkImagingHybrid;general;vtkRenderingCore;general;/home/paulm/software/osmesa-7.9.2/lib/libOSMesa.so;
>>
>> vtkftgl_LIB_DEPENDS:STATIC=general;/home/paulm/software/osmesa-7.9.2/lib/libOSMesa.so;general;vtkfreetype;
>>
>> vtkgl2ps_LIB_DEPENDS:STATIC=general;/home/paulm/software/osmesa-7.9.2/lib/libOSMesa.so;general;m;general;vtkzlib;general;vtkpng;general;m;
>>
>> FIND_PACKAGE_MESSAGE_DETAILS_OSMesa:INTERNAL=[/home/paulm/software/osmesa-7.9.2/lib/libOSMesa.so][/home/paulm/software/osmesa-7.9.2/include][v()]
>>
>>
>> But apparently the correct include path isn't added:
>>
>> [ 48%] Built target IceTGL
>> [ 48%] Built target icetTests_mpi
>> [ 48%] Building CXX object
>> ParaViewCore/VTKExtensions/Rendering/CMakeFiles/vtkPVVTKExtensionsRendering.dir/vtkPVDefaultPass.cxx.o
>> In file included from /home/paulm/c/t/VTK/Rendering/OpenGL/vtkgl.h:22,
>>                   from
>> /home/paulm/c/ParaView-3.98.1-source/ParaViewCore/VTKExtensions/Rendering/vtkPVDefaultPass.cxx:21:
>> /home/paulm/c/ParaView-3.98.1-source/VTK/Rendering/OpenGL/vtkOpenGL.h:27:43:
>> error: GL/gl.h: No such file or directory
>> In file included from
>> /home/paulm/c/ParaView-3.98.1-source/ParaViewCore/VTKExtensions/Rendering/vtkPVDefaultPass.cxx:21:
>> /home/paulm/c/t/VTK/Rendering/OpenGL/vtkgl.h:11277: error: 'GLenum'
>> does not name a type
>> /home/paulm/c/t/VTK/Rendering/OpenGL/vtkgl.h:11278: error: 'GLenum'
>> does not name a type
>> /home/paulm/c/t/VTK/Rendering/OpenGL/vtkgl.h:11279: error: 'GLenum'
>> does not name a type
>> /home/paulm/c/t/VTK/Rendering/OpenGL/vtkgl.h:11280: error: 'GLenum'
>> does not name a type
>> /home/paulm/c/t/VTK/Rendering/OpenGL/vtkgl.h:11281: error: 'GLenum'
>> does not name a type
>>
>>
>> [paulm at int2 t]$ make VERBOSE=1 >out 2>&1
>> [paulm at int2 t]$ grep mpicxx out
>> cd /home/paulm/c/t/ParaViewCore/VTKExtensions/Rendering &&
>> /opt/intel/impi/4.1.0.024/bin64/mpicxx   -DMPICH_IGNORE_CXX_SEEK
>> -DVTK_IN_VTK -DvtkPVVTKExtensionsRendering_EXPORTS -O3 -DNDEBUG -fPIC
>> -I/home/paulm/c/t -I/home/paulm/c/t/VTK/Charts/Core
>> -I/home/paulm/c/ParaView-3.98.1-source/VTK/Charts/Core
>> -I/home/paulm/c/t/VTK/Common/Color
>> -I/home/paulm/c/ParaView-3.98.1-source/VTK/Common/Color
>> -I/home/paulm/c/t/VTK/Common/DataModel
>> -I/home/paulm/c/ParaView-3.98.1-source/VTK/Common/DataModel
>> -I/home/paulm/c/t/VTK/Common/Math
>> -I/home/paulm/c/ParaView-3.98.1-source/VTK/Common/Math
>> -I/home/paulm/c/t/VTK/Common/Core
>> -I/home/paulm/c/ParaView-3.98.1-source/VTK/Common/Core
>> -I/home/paulm/c/t/VTK/Utilities/KWSys
>> -I/home/paulm/c/ParaView-3.98.1-source/VTK/Utilities/KWSys
>> -I/home/paulm/c/t/VTK/Common/Misc -I/home/paulm....
>> [paulm at int2 t]$ grep mpicxx out | grep osmesa-7.9.2
>> [paulm at int2 t]$
>>
>> Any clues which CMake variables to check to get this compile working?
>>
>> Thanks,
>> Paul
>>
>> PS I can't try the 4.x version as we want to do a comparison against
>> benchmarks done on a different system with 3.98.1
>>
>>
>>