[Paraview] [EXTERNAL] Re: Still cannot add to selection with Crtl key

Fri Nov 23 04:50:56 EST 2012

Hi,

I have just installed the latest nightly build 3.98.0-RC3, and the bug is gone (Windows XP 32-bit).

Thank you!

Matthias

Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
Gesendet: Montag, 19. November 2012 16:20
An: Zenker, Dr. Matthias
Betreff: Re: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

Matthais,

We should have the next release candidate in the next day or two, just waiting for a green dashboard to tag the next release candidate.

Utkarsh

On Mon, Nov 19, 2012 at 9:26 AM, Zenker, Dr. Matthias <Matthias.Zenker at erbe-med.com<mailto:Matthias.Zenker at erbe-med.com>> wrote:
Thank you!
For the records: the ctrl-select bug occurs also when I use a sphere source. But it will (hopefully) be fixed in the next release candidate anyway...

Thanks again,

Matthias

P.S.: Is it already known when we can expect the next release candidate?

Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>]
Gesendet: Montag, 19. November 2012 14:59

An: Zenker, Dr. Matthias
Cc: Scott, W Alan; paraview at paraview.org<mailto:paraview at paraview.org>
Betreff: Re: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

You can create the sphere source, by selecting "Sphere" from the "Sources" menu.

Utkarsh

On Mon, Nov 19, 2012 at 3:08 AM, Zenker, Dr. Matthias <Matthias.Zenker at erbe-med.com<mailto:Matthias.Zenker at erbe-med.com>> wrote:
Great!
I will wait fort he next release candidate then...

For the records:
The omission of the ctrl key was an oversight, item 6 should read:
6. Press and hold down Ctrl key, click and drag to select more points, release Ctrl key.

BTW, how do I get the sphere source?

Thank you for your help,

Matthias

Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>]
Gesendet: Freitag, 16. November 2012 18:29

An: Zenker, Dr. Matthias
Cc: Scott, W Alan; paraview at paraview.org<mailto:paraview at paraview.org>
Betreff: Re: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

I've pushed a fix for this. It will be included in the next release candidate.

Utkarsh

On Fri, Nov 16, 2012 at 12:09 PM, Utkarsh Ayachit <utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>> wrote:
At long last I can reproduce this issue (yippie!). I'll track it down and have it fixed.

On Fri, Nov 16, 2012 at 8:46 AM, Utkarsh Ayachit <utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>> wrote:
Is the omission of pressing/releasing the Ctrl key in your procedure an oversight or intentional? Also, can you try with Sphere source -- exactly how I described. If that works and something else doesn't, at least we'll have a starting point. Right now, I have not been able to reproduce the Ctrl key problem (the steps you describe of course fail since I never press the Ctrl key), nor has anyone who responded to this thread (let's ignore the 'call not supported' problem, that's a separate one and I will track that down).

On Fri, Nov 16, 2012 at 2:00 AM, Zenker, Dr. Matthias <Matthias.Zenker at erbe-med.com<mailto:Matthias.Zenker at erbe-med.com>> wrote:
Hi,

my procedure is:

1.       Load can.ex2

2.       Apply

3.       Click "Select Points On"

4.       Click and drag to select some points

5.       Click "Select Points on"

6.       Click and drag to select more points

7.       The previously selected points are not selected any more, only those selected by the 2nd selection. A message window appears saying: "Generic Warning: In C:\DBD\pvs-x32\paraview\src\paraview\ParaViewCore\ServerManager\Core\vtkSMPropertyHelper.cxx, line 408
Call not supported for the current property type."

The same happens when I select cells instead of points.

ParaView 3.98.0-RC1-2-ge3fcf70 32-bit, Windows XP.

Matthias

Von: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com<mailto:utkarsh.ayachit at kitware.com>]
Gesendet: Donnerstag, 15. November 2012 22:33
An: Zenker, Dr. Matthias

Cc: Scott, W Alan; paraview at paraview.org<mailto:paraview at paraview.org>
Betreff: Re: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

And it works for me just fine for me on Windows too :/. Here is the exact sequence of actions in a clean paraview

1. Create Sphere
2. Hit Apply
3. Type "s", ParaView enters selection mode (Select Cells On)
4. Click and drag in the 3D view, some cells get selected.
5. Type "s", ParaView enters selection mode again.
6. Press Ctrl and keep it pressed:
   --- With Ctrl pressed, click and drag in 3D view and few more cells will get selected.
7. Release Ctrl only after click-and-drag operation is complete.

Utkarsh

On Wed, Nov 14, 2012 at 2:25 AM, Zenker, Dr. Matthias <Matthias.Zenker at erbe-med.com<mailto:Matthias.Zenker at erbe-med.com>> wrote:
Bug 0013056, exists since 3.14. I am not sure if it worked with 3.12.0, but it definitively works with 3.12.0-RC2, which I am still using for this very reason.

Thanks,

Matthias

Von: Scott, W Alan [mailto:wascott at sandia.gov<mailto:wascott at sandia.gov>]
Gesendet: Dienstag, 13. November 2012 18:06
An: Utkarsh Ayachit; Zenker, Dr. Matthias
Cc: paraview at paraview.org<mailto:paraview at paraview.org>
Betreff: RE: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

Utkarsh,
I tried this on Linux, and it works fine.
I tried this windows (master pull from about last Friday, November 10), and it does not work.  Not sure if it is related, but my debug build outputs the following warning:

Generic Warning: In ..\..\..\..\..\src\ParaView3\ParaViewCore\ServerManager\Core\vtkSMPropertyHelper.cxx, line 408
Call not supported for the current property type.

Matthias, if you have not already, please write this up as a bug.

Alan

From: paraview-bounces at paraview.org<mailto:paraview-bounces at paraview.org> [mailto:paraview-bounces at paraview.org] On Behalf Of Utkarsh Ayachit
Sent: Monday, November 12, 2012 5:04 PM
To: Zenker, Dr. Matthias
Cc: paraview at paraview.org<mailto:paraview at paraview.org>
Subject: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

This seems to work for me on Linux and Mac (the only platforms I could test on as I am travelling). Have you tried these on anything other than Windows? I wonder if it's a Windows only problem. I will test on Windows once I get back later this week.

Utkarsh

On Thu, Nov 8, 2012 at 3:24 AM, Zenker, Dr. Matthias <Matthias.Zenker at erbe-med.com<mailto:Matthias.Zenker at erbe-med.com>> wrote:
Hi,

in the new binary (3.98.0-RC1, Windows 32 bit), I still cannot add points to the current selection by holding the ctrl key (bug 0013056). Is there a workaround or fix in sight? I use this feature frequently, so I will have to stick with 3.12.0-RC2 until this is fixed (it doesn't work in 3.14 either).

Matthias

_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

_______________________________________________
Powered by www.kitware.com<http://www.kitware.com>

Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20121123/2f7dfe84/attachment-0001.htm>