[Paraview] Write xml for ParaView Plugin

Tuan Ha Tran tuan-ha.tran at insa-lyon.fr
Fri Jun 8 10:18:45 EDT 2012


Thank you very much Seb,
   Indeed, I found in
   /ParaView/install/lib/Paraview-3.14/site-packages/paraview/
  lots of .py file which define the usage of ServerManager, specially servermanager.py.
  ......... And it's 100% like your advice.

  Have a nice day Seb :)

----- Original Message -----
From: Sebastien Jourdain <sebastien.jourdain at kitware.com>
To: Tuan Ha Tran <tuan-ha.tran at insa-lyon.fr>
Cc: paraview-developers at paraview.org, paraview at paraview.org
Sent: Fri, 08 Jun 2012 15:12:17 +0200 (CEST)
Subject: Re: [Paraview] Write xml for ParaView Plugin

Hi Tuan,

the ParaView UI and those things are two different things. There is no
matching at all.
What you can look at is inside the Python shell.

You create the proxy, and basically every property will be expose like
proxy.PropertyName.
In fact, you have the completion inside ParaView python shell to help you out.
Or if you prefer, you can do dir(proxy).
Moreover, if you use ParaViewWeb and a JavaScript console like in
firebug, you do have the completion as well.

proxy.set${PropertyName}( ... )
proxy.get${PropertyName}()

But as I said before, you need to trigger a manual update for
information property otherwise you will get the latest cached value or
the default value that you set in the XML.

Seb


On Fri, Jun 8, 2012 at 6:36 AM, Tuan Ha Tran  wrote:
> Hi Seb,
>   I wonder if you can precise some details for me.
>   With information_only="1", we can tell ParaView at this property is not
> more than a value. I do agree with you.
>   But where can we find this property? Does it appear somewhere so we can
> have a look at it? I think that it will appear in the "Properties" tab, but
> there is nothing.
>   So, I guess that the property may appear in the "Information tab" (below
> the Pipeline Brower where we can find "Properties, Display and
> Information")?
>
>   Thank you very much indeed.
>
>
>
> ----- Original Message -----
> From: Tuan Ha Tran 
> To: Sebastien Jourdain 
> Cc: paraview-developers at paraview.org, paraview at paraview.org
> Sent: Thu, 07 Jun 2012 22:28:14 +0200 (CEST)
> Subject: Re: [Paraview] Write xml for ParaView Plugin
>
> Seb,
>     It really what I'm looking for. I really appreciate your reply. Thank
> you very much indeed.
>     I think that could help me a lot with my workings.
>     I'll give you feedbacks asap.
>     Thank you again.
>
>
> ----- Original Message -----
> From: Sebastien Jourdain 
> To: Tuan Ha Tran 
> Cc: paraview at paraview.org, paraview-developers at paraview.org
> Sent: Thu, 07 Jun 2012 21:59:27 +0200 (CEST)
> Subject: Re: [Paraview] Write xml for ParaView Plugin
>
> Hi Tuan,
>
> a ParaView proxy is a wrapper class that allow ParaView to abstract
> the real location of the vtkObject that are managed by those proxies.
> Even though you are using ParaView as a single process, its design is
> to also work on cluster or super computer.
>
> Saying that, a proxy is either a regular proxy which just wrap a
> vtkObject using properties, or it can be a sourceProxy. A source proxy
> only handle vtkAlgorithm sub-classes which is basically any pipeline
> filter from VTK that use OutputPort and Connection. Those sourceProxy
> are use to compose the pipeline.
>
> In order to control its vtkObject a proxy use an XML descriptor that
> name the concrete vtk class to use and list all the methods that we
> want to be exposed into ParaView in order to control that concrete
> object.
> Those properties are usually use to set some values to the vtkObject
> itself. Or eventually query the vtkObject and retrieve those values.
> But there is no way to set and get at the same time. This is precisely
> why you need to provide the voi (and not you ROI like I wrote) as a
> property (unless you are using a SourceProxy and you get it from your
> vtkAlgorithm) and get the computation result from another information
> property.
>
> If that helps, you can look at that definition and the
> vtkPVRayCastPickingHelper.h file.
> We set a bunch of property and then we use an information property to
> get the result of a computation. Look were we create that
> PickingHelper and how we use it...
>
> + + class="vtkPVRayCastPickingHelper" processes="dataserver">
> +
> + Proxy used to pick a point of a surface mesh.
> +
> + + command="SetPointA"
> + number_of_elements="3"
> + default_values="0.0 0.0 0.0">
> +
> + + command="SetPointB"
> + number_of_elements="3"
> + default_values="0.0 0.0 1.0">
> +
> + + command="GetIntersection" information_only="1" number_of_elements="3"
> + default_values="0.0 0.0 0.0">
> +
> +
> + + command="SetInput">
> +
> + The input from which the selection is extracted.
> +
> +
> + + command="SetSelection">
> +
> + The selection that is used to reduced the input.
> +
> +
> +
>
> Hope this help,
>
> Seb
>
> On Thu, Jun 7, 2012 at 3:30 AM, Tuan Ha Tran wrote:
>> Hi Seb,
>>    Thank you for your reply.
>>    I'm sorry that I don't quite understand your instructions. I'm really
>> new
>> to ParaView.
>>    With my little knowledge in ParaView, I'll try to understand as follow
>> :
>>    - First, I have to write my .xml file with a tab that have "function"
>> declaration? So how to declare these values cause I don't understand the
>> exemples in the *.xml file (filters, writers; etc.)
>>    - And then by the declaration as your instructions about
>> information_only
>> yesterday?
>>
>>    Can you be a little more explicit? What is ROI?
>>
>>    Thank you very much for your kindness.
>>
>>
>>
>>
>> ----- Original Message -----
>> From: Sebastien Jourdain
>> To: Tuan Ha Tran
>> Cc: paraview at paraview.org, paraview-developers at paraview.org
>> Sent: Thu, 07 Jun 2012 01:28:38 +0200 (CEST)
>> Subject: Re: [Paraview] Write xml for ParaView Plugin
>>
>> You should do that in two step.
>>
>> On property on your proxy where you set the ROI.
>> And one information property where you calculate...
>>
>> Seb
>>
>> On Wed, Jun 6, 2012 at 11:17 AM, Tuan Ha Tran wrote:
>>> Hi everybody,
>>> I'm writing some .xml ServerManager file for a ParaView Plugin.
>>> Our class have a function likes this :
>>> double calculate(vtkImagedata* voi) that return a double value calculated
>>> from the vtkImageData.
>>>
>>> I loaded the plugin into Paraview. I use the Python Shell and when I call
>>> myReturnedValue = MyFilter.calculate(proxy) (proxy is a vtkImageData
>>> type),
>>> I always have the following error : AttributeError : 'function' object
>>> has
>>> no attribute 'calculate'
>>>
>>> I searched in the filters.xml and found something mention about function.
>>> I
>>> wonder if we can use these descriptions to access to the function (this
>>> function is nothing similar to any vtk function, don't override any of
>>> them). I think that I have to add something like 'function = calculate'
>>> so
>>> that the function is recognized in ParaView as well as Python but I can't
>>> find any exemple.
>>>
>>> Do you have any idea? Thank you in advance.
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://www.paraview.org/mailman/listinfo/paraview
>>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120608/b07e3395/attachment-0001.htm>


More information about the ParaView mailing list