[Paraview] Plugin Crashing on PV 3.12 RC2
Cory Quammen
cquammen at cs.unc.edu
Wed Apr 25 10:19:26 EDT 2012
Hi Mike and Utkarsh,
Was there a resolution to this problem?
I'm having a similar problem with a set of plugins failing to load
despite everything looking okay. The real oddness in my case is that
sometimes one plugin works and another fails, but when I recompile the
one that worked starts failing and another one works.
Initially I had all the source files and CMake commands in a single
directory and I thought that maybe some files were getting clobbered
by the CMake plugin magic. Putting each plugin in a separate
directory, however, didn't solve the problem.
Thanks,
Cory
On Wed, Oct 12, 2011 at 3:38 PM, Utkarsh Ayachit
<utkarsh.ayachit at kitware.com> wrote:
> That's only needed if you're creating a file-series writer using a
> writer that does not support file series, which is not the case here.
> The problem is your VTk classes aren't getting compiled in/wrapped
> correctly. Let me check it out.
>
> On Wed, Oct 12, 2011 at 3:12 PM, Michael Jackson
> <mike.jackson at bluequartz.net> wrote:
>> What is this new XML tag?
>> si_class="vtkSIFileSeriesReaderProxy"
>>
>> This is one of the differences between my plugin and the plugins that come with ParaView. I still can not come up with why my plugin is failing.
>> --
>> Mike Jackson <www.bluequartz.net>
>>
>> On Oct 12, 2011, at 12:07 PM, Utkarsh Ayachit wrote:
>>
>>> Mike,
>>>
>>> Can you include the CMakeLists.txt?
>>>
>>> Utkarsh
>>>
>>> On Wed, Oct 12, 2011 at 10:40 AM, Michael Jackson
>>> <mike.jackson at bluequartz.net> wrote:
>>>> I have a custom reader plugin that I am trying to update for ParaView 3.12. Everything seems to compile OK and ParaView launches Ok. When I try to open one of my files I get the following:
>>>>
>>>> ERROR: In /Users/Shared/Kitware-CVS/ParaView/ParaViewCore/ServerImplementation/vtkSIProxy.cxx, line 240
>>>> vtkSISourceProxy (0x121a07e60): Failed to create vtkH5VizFileReader. Aborting for debugging purposes.
>>>>
>>>> Which is down in this section of the vtkSIProxy:
>>>>
>>>> if (className && className[0])
>>>> {
>>>> this->SetVTKClassName(className);
>>>> vtkObjectBase* obj = this->Interpreter->NewInstance(className);
>>>> if (!obj)
>>>> {
>>>> vtkErrorMacro("Failed to create " << className
>>>> << ". Aborting for debugging purposes.");
>>>> abort();
>>>> }
>>>> this->VTKObject.TakeReference(obj);
>>>> }
>>>>
>>>>
>>>> In my "Gui XML" code I have this:
>>>> <Reader name="H5VizFileReader"
>>>> extensions="ddviz"
>>>> file_description="ParaDis Vizualization File Reader">
>>>> </Reader>
>>>>
>>>> and in the Server Manager XML I have this:
>>>> <!-- ************************************************************ -->
>>>> <!-- MultiBlock Reader For the dd3d Vizualization Files (.ddviz extension) -->
>>>> <!-- ************************************************************ -->
>>>> <SourceProxy name="H5VizFileReader"
>>>> class="vtkH5VizFileReader">
>>>> <OutputPort name="Nodal Data" index="0" />
>>>> <OutputPort name="Simulation Limits" index="1" />
>>>> <OutputPort name="Glide Planes" index="2" />
>>>> <OutputPort name="Node Density Vs Time" index="3" />
>>>> <OutputPort name="Stress Vs. Total Strain" index="4">
>>>>
>>>> </OutputPort>
>>>> <StringVectorProperty name="FileName" command="SetFileName"
>>>> number_of_elements="1">
>>>> <FileListDomain name="files" />
>>>> </StringVectorProperty>
>>>>
>>>> <IntVectorProperty name="TimeStepRangeInfo"
>>>> command="GetTimeStepRange" information_only="1">
>>>> <SimpleIntInformationHelper />
>>>> </IntVectorProperty>
>>>>
>>>> <DoubleVectorProperty name="TimestepValues"
>>>> information_only="1">
>>>> <TimeStepsInformationHelper />
>>>> </DoubleVectorProperty>
>>>>
>>>> <IntVectorProperty name="Filter Glide Planes"
>>>> command="SetFilterGlidePlanes" number_of_elements="1"
>>>> default_values="0">
>>>> <BooleanDomain name="Enable Glide Plane Filter"></BooleanDomain>
>>>> <Documentation>
>>>> Setting this value will filter the glide planes by the supplied
>>>> index value. The values can NOT be less than Zero (0).
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <IntVectorProperty name="Glide Plane Index"
>>>> command="SetGlidePlaneIndex" number_of_elements="1"
>>>> default_values="1">
>>>> <Documentation>
>>>> This is the value by which the glide planes will be filtered. The
>>>> value should always be greater than 0.
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <IntVectorProperty name="Filter Nodes By Glide Plane"
>>>> command="SetFilterNodesByGlidePlane" number_of_elements="1"
>>>> default_values="0">
>>>> <BooleanDomain name="Filter Nodes By Glide Plane"></BooleanDomain>
>>>> <Documentation>Filter the Nodes by a given glide plane index. This index
>>>> is different than the above index.</Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <IntVectorProperty name="Nodal Glide Plane Index"
>>>> command="SetNodalGlidePlaneIndex" number_of_elements="1"
>>>> default_values="1">
>>>> <Documentation>
>>>> This is the value by which the glide planes will be filtered. The
>>>> value should always be greater than 0.
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <!-- This is the toggle for the SP111 variable.-->
>>>> <IntVectorProperty name="Filter GPVoxels by 111 Slip Planes"
>>>> command="SetSP111_GPVoxel_Filter" number_of_elements="1"
>>>> default_values="0">
>>>> <BooleanDomain name="bool" />
>>>> <Documentation>
>>>> When checked the filter will include VoxelData on the
>>>> {111} slip plane
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <!-- This is the toggle for the SPBar111 variable.-->
>>>> <IntVectorProperty name="Filter GPVoxels by -111 Slip Planes"
>>>> command="SetSPBar111_GPVoxel_Filter" number_of_elements="1"
>>>> default_values="0">
>>>> <BooleanDomain name="bool" />
>>>> <Documentation>
>>>> When checked the filter will include VoxelData on the
>>>> {-111} slip plane
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <!-- This is the toggle for the SP1Bar11 variable.-->
>>>> <IntVectorProperty name="Filter GPVoxels by 1-11 Slip Planes"
>>>> command="SetSP1Bar11_GPVoxel_Filter" number_of_elements="1"
>>>> default_values="0">
>>>> <BooleanDomain name="bool" />
>>>> <Documentation>
>>>> When checked the filter will include VoxelData on the
>>>> {1-11} slip plane
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <!-- This is the toggle for the SP11Bar1 variable.-->
>>>> <IntVectorProperty name="Filter GPVoxels by 11-1 Slip Planes"
>>>> command="SetSP11Bar1_GPVoxel_Filter" number_of_elements="1"
>>>> default_values="0">
>>>> <BooleanDomain name="bool" />
>>>> <Documentation>
>>>> When checked the filter will include VoxelData on the
>>>> {11-1} slip plane
>>>> </Documentation>
>>>> </IntVectorProperty>
>>>>
>>>> <DoubleVectorProperty name="Youngs Modulas"
>>>> command="SetYoungsModulas" number_of_elements="1"
>>>> default_values="200.0e9">
>>>> <Documentation>
>>>> This value will be used for the calculation of the Stress/Strain curves.
>>>> </Documentation>
>>>> </DoubleVectorProperty>
>>>>
>>>> </SourceProxy>
>>>>
>>>> I have cleaned the build directory a few times in the hopes that there was something weird with the configuration/compilation but that did not seem to help. I have not been keeping up with the changes going on with ParaView lately so this is all new to me.
>>>>
>>>> Any help would be appreciated.
>>>>
>>>> Thanks
>>>> ___________________________________________________________
>>>> Mike Jackson Principal Software Engineer
>>>> BlueQuartz Software Dayton, Ohio
>>>> mike.jackson at bluequartz.net www.bluequartz.net
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>
>>
>>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
--
Cory Quammen
Research Associate
Department of Computer Science
The University of North Carolina at Chapel Hill
More information about the ParaView
mailing list