[Paraview] 3.12.0-RC3: could not open source file "GL/gl.h" compiling vtkIceTSynchronizedRenderers.cxx

Utkarsh Ayachit utkarsh.ayachit at kitware.com
Mon Nov 7 09:11:32 EST 2011 

What Takuya is suggesting makes total sense. I'm going to push a fix.

Utkarsh

On Mon, Nov 7, 2011 at 8:23 AM, Takuya OSHIMA
<oshima at eng.niigata-u.ac.jp> wrote:
> Yes /nfs/v14/v14006/opt/Mesa-7.11/include/GL contains gl.h:
>
> ls -al /nfs/v14/v14006/opt/Mesa-7.11/include/GL
> total 1088
> drwxr-xr-x 2 v14006 v14   4096 Oct 25 20:33 .
> drwxr-xr-x 3 v14006 v14   4096 Oct 25 17:15 ..
> -rw-r--r-- 1 v14006 v14 639607 Oct 25 20:33 glext.h
> -rw-r--r-- 1 v14006 v14   4376 Oct 25 20:33 glfbdev.h
> -rw-r--r-- 1 v14006 v14  84670 Oct 25 20:33 gl.h
> -rw-r--r-- 1 v14006 v14 128943 Oct 25 20:33 gl_mangle.h
> -rw-r--r-- 1 v14006 v14  17255 Oct 25 20:33 glu.h
> -rw-r--r-- 1 v14006 v14   3315 Oct 25 20:33 glu_mangle.h
> -rw-r--r-- 1 v14006 v14  43887 Oct 25 20:33 glxext.h
> -rw-r--r-- 1 v14006 v14  17170 Oct 25 20:33 glx.h
> -rw-r--r-- 1 v14006 v14   3463 Oct 25 20:33 glx_mangle.h
> -rw-r--r-- 1 v14006 v14   4770 Oct 25 20:33 mesa_wgl.h
> -rw-r--r-- 1 v14006 v14   8595 Oct 25 20:33 osmesa.h
> -rw-r--r-- 1 v14006 v14  51274 Oct 25 20:33 vms_x_fix.h
> -rw-r--r-- 1 v14006 v14  41377 Oct 25 20:33 wglext.h
> -rw-r--r-- 1 v14006 v14   4468 Oct 25 20:33 wmesa.h
>
> Indeed, if I copy lines from PV 3.10.1 CMakeLists.txt
>
> IF(APPLE)
>  IF(VTK_USE_X OR VTK_OPENGL_HAS_OSMESA)
>    INCLUDE_DIRECTORIES(${OPENGL_INCLUDE_DIR})
>  ENDIF(VTK_USE_X OR VTK_OPENGL_HAS_OSMESA)
> ELSE(APPLE)
>  INCLUDE_DIRECTORIES(${OPENGL_INCLUDE_DIR})
> ENDIF(APPLE)
>
> and paste it to inside IF (PARAVIEW_USE_ICE_T AND VTK_USE_MPI)... of
> ParaViewCore/ClientServerCore/CMakeLists.txt the error is fixed and
> the produced pvserver runs fine (but I am unsure about
> IF(APPLE)... since I only tested on Linux).
>
> Takuya OSHIMA, Ph.D.
> Faculty of Engineering, Niigata University
> 8050 Ikarashi-Ninocho, Nishi-ku, Niigata, 950-2181, JAPAN
>
> From: David Partyka <david.partyka at kitware.com>
> Subject: Re: [Paraview] 3.12.0-RC3: could not open source file "GL/gl.h" compiling vtkIceTSynchronizedRenderers.cxx
> Date: Mon, 7 Nov 2011 07:10:49 -0500
>
>> Can you verify /nfs/v14/v14006/opt/Mesa-7.11/include contains "GL/gl.h"? It
>> should if mesa built and installed correctly.
>>
>> On Mon, Nov 7, 2011 at 6:22 AM, Takuya OSHIMA <oshima at eng.niigata-u.ac.jp>wrote:
>>
>>> Hi Kevin,
>>>
>>> Thaks for your comment. Here is my full CMake configuration. On thing
>>> that may be noticed is that our cluster does not have GL/gl.h under
>>> /usr/include (unlike some of modern Linux systems).
>>>
>>> cmake ../ParaView-3.12.0-RC3 \
>>>    -DCMAKE_CXX_COMPILER=/opt/intel/Compiler/11.0/074/bin/intel64/icpc \
>>>    -DCMAKE_C_COMPILER=/opt/intel/Compiler/11.0/074/bin/intel64/icc \
>>>    -DCMAKE_INSTALL_PREFIX=/nfs/v14/v14006/opt/ParaView-3.12.0-RC3 \
>>>    -DCMAKE_BUILD_TYPE=Release \
>>>    -DBUILD_SHARED_LIBS=ON \
>>>    -DBUILD_TESTING=OFF \
>>>    -DPARAVIEW_BUILD_QT_GUI=OFF \
>>>    -DPARAVIEW_ENABLE_PYTHON=ON \
>>>    -DPARAVIEW_USE_MPI=ON \
>>>    -DMPI_CXX_INCLUDE_PATH=/opt/itc/mpi/mpich-mx-intel11-shared/include \
>>>    -DENABLE_MPI4PY=OFF \
>>>    -DPARAVIEW_ENABLE_COPROCESSING=ON \
>>>    -DVTK_OPENGL_HAS_OSMESA=ON \
>>>    -DVTK_USE_X=OFF \
>>>    -DOPENGL_gl_LIBRARY= \
>>>    -DOPENGL_glu_LIBRARY=/nfs/v14/v14006/opt/Mesa-7.11/lib/libGLU.so \
>>>    -DOPENGL_INCLUDE_DIR=/nfs/v14/v14006/opt/Mesa-7.11/include \
>>>    -DOSMESA_INCLUDE_DIR=/nfs/v14/v14006/opt/Mesa-7.11/include \
>>>    -DOSMESA_LIBRARY=/nfs/v14/v14006/opt/Mesa-7.11/lib/libOSMesa32.so \
>>>    -DVTK_USE_OFFSCREEN=ON
>>>
>>> Takuya OSHIMA, Ph.D.
>>> Faculty of Engineering, Niigata University
>>> 8050 Ikarashi-Ninocho, Nishi-ku, Niigata, 950-2181, JAPAN
>>>
>>> From: "Kevin H. Hobbs" <hobbsk at ohio.edu>
>>> Subject: Re: [Paraview] 3.12.0-RC3: could not open source file "GL/gl.h"
>>> compiling vtkIceTSynchronizedRenderers.cxx
>>> Date: Mon, 07 Nov 2011 05:36:07 -0500
>>>
>>> > On 11/05/2011 06:13 AM, Takuya OSHIMA wrote:
>>> >> Hi,
>>> >>
>>> >> I tried to build the 3.12.0 RC3 with MesaLib-7.11 (OSMesa) on a RHEL
>>> >> 5.1 headless cluster and got an error:
>>> >>
>>> >>
>>> /nfs/work2/v14/v14006/src/ParaView-3.12.0-RC3/VTK/Rendering/vtkOpenGL.h(26):
>>> catastrophic error: could not open source file "GL/gl.h"
>>> >>   # include <GL/gl.h> // Include OpenGL API.
>>> >>                                             ^
>>> >>
>>> >> compilation aborted for
>>> /nfs/work2/v14/v14006/src/ParaView-3.12.0-RC3/ParaViewCore/ClientServerCore/vtkIceTSynchronizedRenderers.cxx
>>> (code 4)
>>> >> make[2]: ***
>>> [ParaViewCore/ClientServerCore/CMakeFiles/vtkPVClientServerCore.dir/vtkIceTSynchronizedRenderers.cxx.o]
>>> Error 4
>>> >>
>>> >> Looking into ParaViewCore/ClientServerCore/CMakeLists.txt I found
>>> >> nothing that specifies ${OPENGL_INCLUDE_DIR} as opposed to the old
>>> >> ParaView-3.10.1/Servers/Filters/CMakeLists.txt (where
>>> >> vtkIceTSynchronizedRenderers.cxx had been in) having
>>> >>
>>> >
>>> >
>>> >  I build PareView with OSMesa from their git repositories every
>>> > night.
>>> >
>>> > Could you please post your CMakeCache.txt to a public server or
>>> > tell us the CMake variables you set?
>>> >
>>> > The OSMesa related variables I set are :
>>> >
>>> > OPENGL_INCLUDE_DIR:PATH=/home/kevin/mesa_osmesa/include
>>> > OPENGL_gl_LIBRARY:FILEPATH=
>>> > OPENGL_glu_LIBRARY:FILEPATH=/home/kevin/mesa_osmesa/lib/libGLU.so
>>> > VTK_OPENGL_HAS_OSMESA:BOOL=ON
>>> > OSMESA_INCLUDE_DIR:PATH=/home/kevin/mesa_osmesa/include
>>> > OSMESA_LIBRARY:FILEPATH=/home/kevin/mesa_osmesa/lib/libOSMesa.so
>>> > VTK_USE_OFFSCREEN:BOOL=ON
>>> > VTK_USE_X:BOOL=OFF
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://www.paraview.org/mailman/listinfo/paraview
>>>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>

More information about the ParaView mailing list