[Paraview] ParaViewWeb Server on Linux

Thu Jul 21 09:31:35 EDT 2011

Hi Katsumi,

Just for my knowledge, what kind of Linux distribution are you using ?
I'm getting confused about the /usr/local location.
Did you untar the package yourself or did you used the system package manager ?

Then several comments, based on what I can understand from what you said.

1) Based on the log file, it seems that you try to start tomcat while
it was already running. You should make sure that it is stop before
starting it. Here is a good tip.

## Make sure tomcat is not running anymore
> ps aux | grep tomcat | grep java
## if any process found, just kill them "gently" by executing
> kill the-correct-process-id

2) In one of my previous question you half replied to it.

>> 3) Is there any X running on your linux computer ?
> Yes there is X on my computer.

The "running" word is very important, in fact, tomcat has to be
started by a user that has a X context defined. Otherwise you will
need to follow those instructions:
http://www.paraview.org/Wiki/ParaViewWeb_with_system_tomcat_package

3) So what user is running tomcat ? tomcat6, root ? From where ? A
terminal from X or ssh ?

4) As you are doing all of this as root, please make sure you know
what you are doing. Otherwise, you can simply create a "paraviewweb"
user and do everything inside its home directory. The only thing is
that you will have to make sure that no other tomcat is running on the
computer otherwise you will still have this exception
"java.net.BindException: Address already in use <null>:8080"

Hope this give you enough points to look into.

Seb

On Thu, Jul 21, 2011 at 12:19 AM,  <katsumi.sekido at unisys.co.jp> wrote:
> Dear  Sebastien,
>
> hello, I will explain the environment. I installed Tomcat in /usr/local and
> built ParaViewWeb in /root. ( Both operations are done as "root" ).
> And I copied war files in Tomcat directory following the manual.
>
>> Then can you send me (offlist if you want) the catalina.out
>> file that is inside TOMCAT_HOME/logs directory.
>
> Thank you very much for your kind support. I will attach log files.
>
> Best regards,
>
> Katsumi SEKIDO
>
>> -----Original Message-----
>> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
>> Sent: Wednesday, July 20, 2011 9:19 PM
>> To: Sekido, Katsumi
>> Cc: paraview at paraview.org
>> Subject: Re: ParaViewWeb Server on Linux
>>
>> Hi Katsumi,
>>
>> running applications like that as root is bad, but this won't
>> affect the capability of the software to run.
>> So just to sum up and make sure I get what you are saying.
>>
>> As root, in your home directory (/root/) you did un-tar a
>> tomcat package where you deployed the ParaViewWeb
>> applications. Is that correct ?
>> Then can you send me (offlist if you want) the catalina.out
>> file that is inside TOMCAT_HOME/logs directory.
>>
>> Thanks,
>>
>> Seb
>>
>> On Wed, Jul 20, 2011 at 12:39 AM,
>> <katsumi.sekido at unisys.co.jp> wrote:
>> > Dear  Sebastien,
>> > hello, thank you for reply. I will respond to your
>> questions as follows.
>> >
>> >> 1) Did you try to execute manually the PWServer executable
>> based on
>> >> the path that is set inside
>> TOMCAT_ROOT/lib/pw-config.properties. Did
>> >> it crash ?
>> >
>> > Yes I did. And it didn't crash.
>> >
>> >> 2) Did you forget to start activemq ?
>> >
>> > No, I started activemq.
>> >
>> >> 3) Is there any X running on your linux computer ?
>> >
>> > Yes there is X on my computer.
>> >
>> >> 4) Which user is running tomcat ?
>> >
>> > The user is "root(=super user)"... Is this user wrong?
>> >
>> > Best regards,
>> >
>> > Katsumi SEKIDO
>> >
>> >
>> >> -----Original Message-----
>> >> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
>> >> Sent: Tuesday, July 19, 2011 9:44 PM
>> >> To: Sekido, Katsumi
>> >> Cc: paraview at paraview.org
>> >> Subject: Re: ParaViewWeb Server on Linux
>> >>
>> >> Hi Kasumi,
>> >>
>> >> Could you be more precise on what you done from the FAQ
>> and what did
>> >> you get ?
>> >>
>> >> 1) Did you try to execute manually the PWServer executable
>> based on
>> >> the path that is set inside
>> TOMCAT_ROOT/lib/pw-config.properties. Did
>> >> it crash ?
>> >>
>> >> 2) Did you forget to start activemq ?
>> >>
>> >> 3) Is there any X running on your linux computer ?
>> >>
>> >> 4) Which user is running tomcat ?
>> >>
>> >> Thanks,
>> >>
>> >> Seb
>> >>
>> >> On Tue, Jul 19, 2011 at 12:53 AM,
>> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> > Dear Sebastien,
>> >> >
>> >> > hello, long time no see. Thanks to your kind advices, I
>> >> could get some
>> >> > war files in the Tomcat directory.
>> >> >
>> >> > But I try to execute samples, I see the page correctly,
>> >> but not the
>> >> > 3D content of the view.
>> >> >
>> >> > I check FAQ http://www.vtk.org/Wiki/ParaViewWeb/FAQ and
>> follow the
>> >> > chekpoint as written, but I can't see the 3D content of the
>> >> view now.
>> >> >
>> >> > I also check log file in the Tomcat directory named
>> "pw-out-?????",
>> >> > those files say as following,
>> >> >
>> >> > -------------------------------------------------
>> >> >
>> >> > JMS Initialized in 0.631006 seconds sessionID : 98307 logLevel :
>> >> > ERROR Processing Engine Initialized in 1.77516 seconds
>> >> >
>> >> > Processing engine is started !
>> >> >
>> >> > --------------------------------------------------
>> >> >
>> >> > The Web service seems to work normally. And I can't
>> >> understand what is
>> >> > wrong.
>> >> > So... please let me know how can I fix this problem.
>> >> >
>> >> > Best regards,
>> >> >
>> >> > Katsumi SEKIDO
>> >> >
>> >> >> -----Original Message-----
>> >> >> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
>> >> >> Sent: Thursday, June 02, 2011 9:03 PM
>> >> >> To: Sekido, Katsumi
>> >> >> Cc: paraview at paraview.org
>> >> >> Subject: Re: ParaViewWeb Server on Linux
>> >> >>
>> >> >> in fact the pw directory is the source directory of ParaViewWeb.
>> >> >> Moreover, the documentation explain how to compile each
>> component
>> >> >> independently from each other, but if you simply turn
>> ON all the
>> >> >> options, you will get everything at once.
>> >> >>
>> >> >> Seb
>> >> >>
>> >> >> On Thu, Jun 2, 2011 at 3:05 AM,
>> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> > Dear Sebastien,
>> >> >> >
>> >> >> > hello, thanks to your support, I could fix the
>> >> make-process issue.
>> >> >> > But in the next phase, I met a trouble again...
>> >> >> > By the manual, I have to "ccmake ../pw" but there are no "pw"
>> >> >> > directory, so I searched a suitable directory by "grep
>> >> >> > CORE_SERVICE_URL", but there are no files that contain
>> >> >> "CORE_SERVICE_URL". So I missed the "pw"
>> >> >> > directory.
>> >> >> > What directory shoud I indicate as the "pw" directory?
>> >> >> >
>> >> >> > Best regards,
>> >> >> >
>> >> >> > Katsumi SEKIDO
>> >> >> >
>> >> >> >> -----Original Message-----
>> >> >> >> From: Sebastien Jourdain
>> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> Sent: Wednesday, June 01, 2011 8:17 PM
>> >> >> >> To: Sekido, Katsumi
>> >> >> >> Cc: paraview at paraview.org
>> >> >> >> Subject: Re: ParaViewWeb Server on Linux
>> >> >> >>
>> >> >> >> Hi Katsumi,
>> >> >> >>
>> >> >> >> this issue is related to a miss-matching version of
>> >> ParaView and
>> >> >> >> ParaViewWeb.
>> >> >> >> This previous message explain how to fix that issue.
>> >> >> >>
>> >> >> >> http://markmail.org/message/ws3rufiq3lni2ffs
>> >> >> >>
>> >> >> >> Seb
>> >> >> >>
>> >> >> >> On Wed, Jun 1, 2011 at 3:16 AM,
>> >> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> >> > Dear Sebastien,
>> >> >> >> >
>> >> >> >> > hello, I re-install cmake from binary distribution, ccmake
>> >> >> >> becomes to work!
>> >> >> >> >
>> >> >> >> > And I tried the abusolute path instead of  the relative
>> >> >> >> path, so the
>> >> >> >> > situation progressed.(Makefile has generated)
>> >> >> >> >
>> >> >> >> > But in make process, following error has occered.
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >>
>> >>
>> ---------------------------------------------------------------------
>> >> >> >> -
>> >> >> >> > ----------------------------------------------
>> >> >> >> > :
>> >> >> >> > :
>> >> >> >> > [ 52%] Built target ParaWebPlugin [ 57%] Building
>> CXX object
>> >> >> >> > ParaViewAdapter/CMakeFiles/PWServer.dir/main.cxx.o
>> >> >> >> > /root/ParaViewWeb/ParaViewAdapter/main.cxx: In function int
>> >> >> >> main(int, char**):
>> >> >> >> > /root/ParaViewWeb/ParaViewAdapter/main.cxx:41: error
>> >> >> >> PROCESS_CLIENT is
>> >> >> >> > not a member of 'vtkProcessModule"
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >>
>> >>
>> ---------------------------------------------------------------------
>> >> >> >> -
>> >> >> >> > ------------------------------------------------
>> >> >> >> >
>> >> >> >> > I checked ParaViewWeb/ParaViewAdapter/main.cxx and
>> >> >> >> ParaView-3.10.1/Servers/Common/vtkProcessModule.h.
>> >> >> >> > Certainly main.cxx refers "PROCESS_CLIENT" but this symbol
>> >> >> >> is not defined in vtkProcessModule.h and other all files...
>> >> >> >> >
>> >> >> >> > How can I resolve this problem?
>> >> >> >> >
>> >> >> >> > Best regards,
>> >> >> >> >
>> >> >> >> > Katsumi SEKIDO
>> >> >> >> >
>> >> >> >> >> -----Original Message-----
>> >> >> >> >> From: Sebastien Jourdain
>> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> >> Sent: Tuesday, May 31, 2011 8:38 PM
>> >> >> >> >> To: Sekido, Katsumi
>> >> >> >> >> Cc: paraview at paraview.org
>> >> >> >> >> Subject: Re: ParaViewWeb Server on Linux
>> >> >> >> >>
>> >> >> >> >> Hi Katsumi,
>> >> >> >> >>
>> >> >> >> >> if you have a server X running, you can launch cmake-gui
>> >> >> >> which will
>> >> >> >> >> pop-up a graphical application ?
>> >> >> >> >> On the other hand, could you explain why ccmake is
>> >> not working ?
>> >> >> >> >>
>> >> >> >> >> Moreover, use absolute path inside your configuration
>> >> >> >> instead of the
>> >> >> >> >> relative ones.
>> >> >> >> >> And the error that you are seeing is because you need to
>> >> >> >> point to the
>> >> >> >> >> build directory of ParaView so you can build one of the
>> >> >> components
>> >> >> >> >> needed by ParaViewWeb.
>> >> >> >> >>
>> >> >> >> >> Seb
>> >> >> >> >>
>> >> >> >> >> PS: You shouldn't change anything from the source
>> directory.
>> >> >> >> >> And if you use cmake instead of ccmake, it should work
>> >> >> in the same
>> >> >> >> >> way but less interactively. But the file that you can
>> >> >> >> change inside
>> >> >> >> >> the build directory is the CMakeCache.txt...
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> On Tue, May 31, 2011 at 1:42 AM,
>> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> >> >> > Dear Sebastien,
>> >> >> >> >> >
>> >> >> >> >> > hello, thank you for reply. I understand
>> SOURCE_DIR equals
>> >> >> >> >> ParaViewWeb.
>> >> >> >> >> > And I will explain my operation.
>> >> >> >> >> >
>> >> >> >> >> > I use cmake istead of ccmake because ccmake
>> doesn't work
>> >> >> >> >> > in
>> >> >> >> >> my environment.
>> >> >> >> >> > So I modified "CMakeLists.txt" of "ParaVIewWeb"
>> as follows.
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>> ---------------------------------------------------------------------
>> >> >> >> >> -
>> >> >> >> >> > -----------------
>> >> >> >> >> > #
>> >> >> >> >> > #          ParaView Web Visualisation @ Kitware #
>> >> >> >> >> >
>> >> >> >> >> > cmake_minimum_required(VERSION 2.6) set(ACTIVEMQ_CPP
>> >> >> >> >> > "/usr/local/lib/libactivemq-cpp.so")
>> >> >> >> >> > set(ACTIVEMQ_INCLUDE_DIR
>> >> >> >> "/usr/local/include/activemq-cpp-3.1.0/")
>> >> >> >> >> > set(BUILD_PW_SERVER "ON")
>> >> >> >> >> > set(BUILD_TESTING "ON")
>> >> >> >> >> > set(BUILD_WEB_SERVICE "OFF")
>> set(CMAKE_BUILD_TYPE "Debug")
>> >> >> >> >> > set(CMAKE_INSTALL_PREFIX
>> >> >> >> >> > "../install-pw") set(ParaView_DIR
>> >> >> >> >> > "../build-paraview")
>> >> >> >> >> > project(PARAVIEW_WEB)
>> >> >> >> >> > :
>> >> >> >> >> > :
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>> ---------------------------------------------------------------------
>> >> >> >> >> -
>> >> >> >> >> > --------------------------
>> >> >> >> >> >
>> >> >> >> >> > These "set" operations seem to work well in "ParaView
>> >> >> >> >> build" process,
>> >> >> >> >> > but in "build-pw" process, messages are as follows.
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>> ---------------------------------------------------------------------
>> >> >> >> >> -
>> >> >> >> >> > --------------------------
>> >> >> >> >> >
>> >> >> >> >> > [root at yshimizu1 build-pw]# cmake ../ParaViewWeb
>> >> >> >> >> > -- The C compiler identification is GNU
>> >> >> >> >> > -- The CXX compiler identification is GNU
>> >> >> >> >> > -- Check for working C compiler: /usr/bin/gcc
>> >> >> >> >> > -- Check for working C compiler: /usr/bin/gcc -- works
>> >> >> >> >> > -- Detecting C compiler ABI info
>> >> >> >> >> > -- Detecting C compiler ABI info - done
>> >> >> >> >> > -- Check for working CXX compiler: /usr/bin/c++
>> >> >> >> >> > -- Check for working CXX compiler: /usr/bin/c++ -- works
>> >> >> >> >> > -- Detecting CXX compiler ABI info
>> >> >> >> >> > -- Detecting CXX compiler ABI info - done CMake Error at
>> >> >> >> >> > ParaViewAdapter/CMakeLists.txt:9 (find_package):
>> >> >> >> >> >  Could not find module FindParaView.cmake or a
>> >> >> >> >> configuration file for
>> >> >> >> >> >  package ParaView.
>> >> >> >> >> >
>> >> >> >> >> >  Adjust CMAKE_MODULE_PATH to find
>> >> FindParaView.cmake or set
>> >> >> >> >> > ParaView_DIR to
>> >> >> >> >> >  the directory containing a CMake configuration file for
>> >> >> >> ParaView.
>> >> >> >> >> > The file
>> >> >> >> >> >  will have one of the following names:
>> >> >> >> >> >
>> >> >> >> >> >    ParaViewConfig.cmake
>> >> >> >> >> >    paraview-config.cmake
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > CMake Error at
>> ParaViewAdapter/CMakeLists.txt:12 (include):
>> >> >> >> >> >  include called with wrong number of arguments.  Include
>> >> >> >> only takes
>> >> >> >> >> > one
>> >> >> >> >> >  file.
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > CMake Error at ParaViewAdapter/CMakeLists.txt:50
>> >> >> >> >> (add_paraview_plugin):
>> >> >> >> >> >  Unknown CMake command "add_paraview_plugin".
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > -- Configuring incomplete, errors occurred!
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>> ---------------------------------------------------------------------
>> >> >> >> >> -
>> >> >> >> >> > ---------------------------
>> >> >> >> >> >
>> >> >> >> >> > I guess... in this case, setting variable operations are
>> >> >> >> >> wrong... If
>> >> >> >> >> > so, please let me know the right way to set variable.
>> >> >> >> >> >
>> >> >> >> >> > Best regards,
>> >> >> >> >> >
>> >> >> >> >> > Katsumi SEKIDO
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >> -----Original Message-----
>> >> >> >> >> >> From: Sebastien Jourdain
>> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> >> >> Sent: Monday, May 30, 2011 9:56 PM
>> >> >> >> >> >> To: Sekido, Katsumi
>> >> >> >> >> >> Cc: paraview at paraview.org
>> >> >> >> >> >> Subject: Re: ParaViewWeb Server on Linux
>> >> >> >> >> >>
>> >> >> >> >> >> Hi Katsumi,
>> >> >> >> >> >>
>> >> >> >> >> >> your first attempt was the right one. SOURCE_DIR is the
>> >> >> >> >> ParaViewWeb
>> >> >> >> >> >> source directory that you get from git. It's the higher
>> >> >> >> directory
>> >> >> >> >> >> that contains a CMakeList.txt file.
>> >> >> >> >> >>
>> >> >> >> >> >> Now the question is, what do you mean by CMake
>> >> doesn't work.
>> >> >> >> >> >>
>> >> >> >> >> >> Seb
>> >> >> >> >> >>
>> >> >> >> >> >> On Mon, May 30, 2011 at 5:53 AM,
>> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> >> >> >> > Dear Sebastien,
>> >> >> >> >> >> >
>> >> >> >> >> >> > hello, as you mentioned,  I missed
>> activemq-cpp project
>> >> >> >> >> >> build. Sorry...
>> >> >> >> >> >> > I successed activemq-cpp build and ParaView
>> build. But
>> >> >> >> >> in the next
>> >> >> >> >> >> > phase, I met a trouble.
>> >> >> >> >> >> >
>> >> >> >> >> >> > By the manual (website and readme.txt), I
>> have to build
>> >> >> >> >> >> > the
>> >> >> >> >> >> "build-pw"
>> >> >> >> >> >> > directory by "ccmake ../SOURCE_DIR". But I couldn't
>> >> >> >> >> >> > find
>> >> >> >> >> >> "SOURCE_DIR".
>> >> >> >> >> >> > So I tried "ParaViewWeb" directory gotten by
>> >> git command.
>> >> >> >> >> >> But cmake doesn't work...
>> >> >> >> >> >> > How should I indicate directory as the "SOURCE_DIR" ?
>> >> >> >> >> >> >
>> >> >> >> >> >> > Best regards,
>> >> >> >> >> >> >
>> >> >> >> >> >> > Katsumi SEKIDO
>> >> >> >> >> >> >
>> >> >> >> >> >> >> -----Original Message-----
>> >> >> >> >> >> >> From: Sebastien Jourdain
>> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> >> >> >> Sent: Thursday, May 26, 2011 8:54 PM
>> >> >> >> >> >> >> To: Sekido, Katsumi
>> >> >> >> >> >> >> Cc: paraview at paraview.org
>> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> Hi Katsumi,
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> did you looked at that web page ?
>> >> >> >> >> >> >>
>> http://activemq.apache.org/building-activemq-cpp.html
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> The first link refer to the project that you
>> >> are missing.
>> >> >> >> >> >> I guess, in
>> >> >> >> >> >> >> your case, you'll have to build that project too.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> Seb
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> On Thu, May 26, 2011 at 4:20 AM,
>> >> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> >> >> >> >> > Dear Sebastien,
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> > hello, now I'm trying build ParaViewWeb server on
>> >> >> >> >> >> Linux(CentOS5.6).
>> >> >> >> >> >> >> > But at the make process of activemq-cpp, error
>> >> >> has occured.
>> >> >> >> >> >> >> > The message is "/usr/bin/ld: cannot find -luuid".
>> >> >> >> >> >> >> > So I search some uuid-rpms and attached them, but
>> >> >> >> >> >> >> > the
>> >> >> >> >> >> >> situation doesn't change.
>> >> >> >> >> >> >> > So please let me know how can I resolve
>> this error.
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> > Best regards,
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> > Katsumi SEKIDO
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> -----Original Message-----
>> >> >> >> >> >> >> >> From: Sebastien Jourdain
>> >> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> >> >> >> >> Sent: Wednesday, May 11, 2011 3:05 PM
>> >> >> >> >> >> >> >> To: Sekido, Katsumi
>> >> >> >> >> >> >> >> Cc: paraview at paraview.org
>> >> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Hi Katsumi,
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> If you can get a Linux machine, it will be
>> >> way simpler.
>> >> >> >> >> >> >> >> On the other hand, for git you can use
>> the http url
>> >> >> >> >> >> which use the
>> >> >> >> >> >> >> >> standard http protocol to communicate. So you
>> >> >> >> >> >> >> >> shouldn't
>> >> >> >> >> >> >> get any issue
>> >> >> >> >> >> >> >> with your proxy.
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> > git clone http://paraview.org/ParaViewWeb.git
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> Seb
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> On Wed, May 11, 2011 at 12:03 AM,
>> >> >> >> >> <katsumi.sekido at unisys.co.jp>
>> >> >> >> >> >> >> >> wrote:
>> >> >> >> >> >> >> >> > Dear Sebastien,
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> > hello, thank you for reply. I understand the
>> >> >> >> situation. We
>> >> >> >> >> >> >> >> will try to
>> >> >> >> >> >> >> >> > build on Linux or (if possible) Windows.
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> > But anyway threre is one problem. I
>> >> installed Cygwin
>> >> >> >> >> >> >> >> > and
>> >> >> >> >> >> >> try to get
>> >> >> >> >> >> >> >> > source file and makefile and other
>> resources, but
>> >> >> >> >> >> >> >> > our
>> >> >> >> >> >> >> company proxy
>> >> >> >> >> >> >> >> > server does not open git-protocol port, so I
>> >> >> >> couldn't get
>> >> >> >> >> >> >> >> them. And it might impossible to open this port.
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> > So... if possible, could you send me these
>> >> >> resources as
>> >> >> >> >> >> >> attachments?
>> >> >> >> >> >> >> >> > And if it is difficult, it is very helpful to
>> >> >> >> let me know
>> >> >> >> >> >> >> >> any download sites...
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> > Best regards,
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> > Katsumi SEKIDO
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> -----Original Message-----
>> >> >> >> >> >> >> >> >> From: Sebastien Jourdain
>> >> >> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> >> >> >> >> >> Sent: Tuesday, May 10, 2011 9:15 PM
>> >> >> >> >> >> >> >> >> To: Sekido, Katsumi
>> >> >> >> >> >> >> >> >> Cc: paraview at paraview.org
>> >> >> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> Hi Katsumi,
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> as I said previously, ParaViewWeb should work
>> >> >> >> on Windows
>> >> >> >> >> >> >> >> but it's a
>> >> >> >> >> >> >> >> >> non-tested platform. Which means we can't
>> >> >> >> really help you
>> >> >> >> >> >> >> >> with that.
>> >> >> >> >> >> >> >> >> So if you don't have any skills in building
>> >> >> >> such system
>> >> >> >> >> >> >> >> >> on
>> >> >> >> >> >> >> >> Windows,
>> >> >> >> >> >> >> >> >> you should definitely try to get a Linux
>> >> or a Mac.
>> >> >> >> >> >> >> >> >> That's exactly what happen with Luca who
>> >> >> >> finally managed
>> >> >> >> >> >> >> >> to setup a
>> >> >> >> >> >> >> >> >> server on Linux.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> Seb
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> On Tue, May 10, 2011 at 5:48 AM,
>> >> >> >> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> >> >> >> >> >> >> > Dear Sebastien,
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > hello, now I'm trying to build
>> >> ParaViewWeb server
>> >> >> >> >> >> on Windows.
>> >> >> >> >> >> >> >> >> > Your colleague could built it smoothly...
>> >> >> but now I
>> >> >> >> >> >> >> am in a mess.
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > I am ashamed my poor skill. And I need
>> >> >> your support.
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > I read website
>> >> >> >> >> >> >> >> >>
>> >> "http://www.vtk.org/Wiki/ParaViewWeb_Building" and
>> >> >> >> >> >> >> >> >> FAQ,
>> >> >> >> >> >> >> >> >> > but the description is only for UNIX. So I
>> >> >> >> wonder if I
>> >> >> >> >> >> >> >> >> shoud install
>> >> >> >> >> >> >> >> >> > Cygwin or install Windows utilities
>> >> >> individually. (
>> >> >> >> >> >> >> For example
>> >> >> >> >> >> >> >> >> > "nmake" )
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > So it is very helpful for me to know more
>> >> >> detailed
>> >> >> >> >> >> >> >> >> > building
>> >> >> >> >> >> >> >> >> procedure for Windows.
>> >> >> >> >> >> >> >> >> > And as you wrote, now getting activemq-cpp
>> >> >> >> >> 3.1.0. is very
>> >> >> >> >> >> >> >> >> difficult...
>> >> >> >> >> >> >> >> >> > Please let me know how to get/build
>> >> >> >> activemq-cpp 3.1.0.
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > Best regards,
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > Katsumi SEKIDO
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> -----Original Message-----
>> >> >> >> >> >> >> >> >> >> From: Sebastien Jourdain
>> >> >> >> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
>> >> >> >> >> >> >> >> >> >> Sent: Thursday, April 28, 2011 8:50 PM
>> >> >> >> >> >> >> >> >> >> To: Sekido, Katsumi
>> >> >> >> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> Hi Katsumi,
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> ParaViewWeb should work on windows.
>> >> But it has
>> >> >> >> >> >> >> >> >> >> never
>> >> >> >> >> >> >> >> been really
>> >> >> >> >> >> >> >> >> >> tested on Windows. Although one of my
>> >> >> colleague did
>> >> >> >> >> >> >> >> >> managed to build
>> >> >> >> >> >> >> >> >> >> it.
>> >> >> >> >> >> >> >> >> >> The tricky part will be to get/build
>> >> >> >> >> >> >> >> >> >> activemq-cpp
>> >> >> >> >> >> >> >> 3.1.0. The rest
>> >> >> >> >> >> >> >> >> >> should be pretty smooth.
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> Seb
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> On Thu, Apr 28, 2011 at 1:44 AM,
>> >> >> >> >> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
>> >> >> >> >> >> >> >> >> >> > Dear Sebastien,
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > Hello, I read the mail thread "[Paraview]
>> >> >> >> >> [paraviewweb]
>> >> >> >> >> >> >> >> >> >> trouble with paraviewweb on windows".
>> >> >> >> >> >> >> >> >> >> > But unfortunately we have to build a
>> >> >> >> >> >> paraviewweb server on
>> >> >> >> >> >> >> >> >> >> Microsoft Windows.
>> >> >> >> >> >> >> >> >> >> > I guess... Mac works as a server
>> >> well, so it
>> >> >> >> >> >> >> >> >> >> > is
>> >> >> >> >> >> possible
>> >> >> >> >> >> >> >> >> >> > to
>> >> >> >> >> >> >> >> >> >> build a server on Windows.
>> >> >> >> >> >> >> >> >> >> > Do you have any plan to make it
>> possible to
>> >> >> >> >> >> build a server
>> >> >> >> >> >> >> >> >> >> on Windows?
>> >> >> >> >> >> >> >> >> >> > And if you have no plan, please
>> tell me how
>> >> >> >> >> >> >> >> >> >> > can
>> >> >> >> >> >> I build a
>> >> >> >> >> >> >> >> >> >> server on Windows?
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > Best regards,
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > Katsumi SEKIDO
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >
>> >>
>> >
>>
>