[Paraview] How to use a filter in a Python script?
ghw at accutrol.com
ghw at accutrol.com
Thu Nov 4 12:53:19 EDT 2010
Matt,
Dude! You are sooooooo awesome! Now, how can I impress my
customers if all of the magic is gone?
You have been reading my mail. You are correct. I am interested
in integrating the data values along a line segment (in this case,
density). I have actually been doing this in TECPLOT, on an OLD
Linux box. The license upgrade for TECPLOT is prohibitively
expensive and I am concerned that some day the Gateway 166 MHz
box will die. Therefore, I am converting my TECPLOT tools over
to ParaView.
ParaView rocks! And so does this community!
Thanks for all your help,
Hamilton Woods
---------- Original Message -----------
From: m.c.wilkins at massey.ac.nz
To: ghw at accutrol.com
Cc: paraview at paraview.org
Sent: Thu, 4 Nov 2010 10:27:05 +1300
Subject: Re: [Paraview] How to use a filter in a Python script?
> Hi,
>
> Yes the trace is great, it still couldn't tell me how to actually
> extract the numbers along a plotoverline though, without doing a
> Spreadsheet view or something.
>
> You have probably figured out how to do a plotoverline using the Trace:
>
> from paraview.simple import *
> reader = servermanager.sources.XMLUnstructuredGridReader(FileName =
> "/var/tmp/file.vtu") pl = PlotOverLine(Input = reader)
> pl.Source.Point1 = [-7000, -5000, 0] pl.Source.Point2 = [4300, 6300,
> 1111.75] CreateXYPlotView() d = Show()
> d.XArrayName = 'arc_length'
> d.SeriesVisibility = ['namecolours (0)', '0', 'namecolours (1)', '0',
> 'namecolours (2)', '0', 'vtkValidPointMask', '0', 'arc_length',
> '0'] # whatever your variables are
> d.UseIndexForXAxis = 0 Render()
>
> But to actually get the values out you don't even need to do the plot
> a simple:
>
> from paraview.simple import *
> reader = servermanager.sources.XMLUnstructuredGridReader(FileName =
> "/var/tmp/file.vtu") pl = PlotOverLine(Input = reader)
> pl.Source.Point1 = [-7000, -5000, 0] pl.Source.Point2 = [4300, 6300,
> 1111.75]
>
> does, followed by stuff like this:
>
> # to get the number of points on the plotoverline line
> pl = servermanager.Fetch(pl)
> pl.GetPoints().GetData().GetNumberOfPoints()
>
> # to get the (x,y,z) info for the points on the pol line
> pl.GetPoints().GetData().GetValue(0) -> x of first point
> pl.GetPoints().GetData().GetValue(1) -> y of first point
> pl.GetPoints().GetData().GetValue(2) -> z of first point
> etc
>
> # to get the data on the line
> pl.GetPointData().GetArray(0).GetValue(0)
> etc
>
> # and to get the name of the array on the line
> pl.GetPointData().GetArrayName(0) -> 'cfnode'
> etc
>
> Matt Wilkins
>
> On Wed, Nov 03, 2010 at 11:38:25AM -0400, ghw at accutrol.com wrote:
> > Dude! You are sooooo awesome! Why didn't I think of that? Because
> > I thought trace was for something altogether different from that.
> >
> > Now I feel like I can do anything!
> >
> > Thanks immensely for your help,
> > Hamilton Woods
> >
> >
> > ---------- Original Message -----------
> > From: emonson at cs.duke.edu
> > To: ghw at accutrol.com
> > Cc: paraview list <paraview at paraview.org>
> > Sent: Wed, 3 Nov 2010 11:20:47 -0400
> > Subject: Re: [Paraview] How to use a filter in a Python script?
> >
> > > Hey Hamilton,
> > >
> > > You should also try using the Python Trace (and Trace State)
> > > functionality now built into ParaView. After (or while) you set up
> > > your pipeline in ParaView this will give you a Python script to
> > > accomplish the same thing. This page tells a bit about the current
> > > (git) version:
> > >
> > > http://www.paraview.org/Wiki/Python_GUI_Tools
> > >
> > > You'll see the Start Trace and Trace State if you go to Tools-
> > > >Python Shell, and then click on the Trace tab on the right of the panel.
> > >
> > > -Eric
> > >
> > > ------------------------------------------------------
> > > Eric E Monson
> > > Duke Visualization Technology Group
> > >
> > > On Nov 3, 2010, at 10:00 AM, Sebastien Jourdain wrote:
> > >
> > > > Hi Hamilton,
> > > >
> > > > You can look at http://www.paraview.org/Wiki/ParaView/Python_Scripting
> > > > and that http://www.paraview.org/Wiki/ParaViewUsersGuide/List_of_filters
> > > >
> > > > Seb
> > > >
> > > > On Tue, Nov 2, 2010 at 10:31 PM, <ghw at accutrol.com> wrote:
> > > >> I am a newbie to Paraview and have little experience programming
Python. I
> > > >> would like to know how to call a particular filter from within
Python. The
> > > >> only filter I have seen referenced in the Python scripting
documentation is
> > > >> Shrink().
> > > >>
> > > >> I want to retrieve the scalar values along a line segment (Plot Over
> > > >> Line(ProbeLine)) that extends through an unstructured 3D grid. I
have "The
> > > >> ParaView Guide", "The VTK User's Guide" and "The Visualization
Toolkit: An
> > > >> Object-Oriented Approach to 3D Graphics". I don't see how to
> > programmatically
> > > >> do this. I have looked on all of the ParaView web sites that I can
find, and
> > > >> in tutorials. I do not even see a list of available filter names.
> > > >>
> > > >> Is there a guide for Python Scripting (chapter 20 of The ParaView Guide
> > is the
> > > >> best I have found) that covers using filters? Example code?
Anything? How
> > > >> do you even find the filter names in the documentation?
> > > >>
> > > >> Thanks for any help,
> > > >> Hamilton Woods
> > > >> _______________________________________________
> > > >> Powered by www.kitware.com
> > > >>
> > > >> Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > > >>
> > > >> Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > > >>
> > > >> Follow this link to subscribe/unsubscribe:
> > > >> http://www.paraview.org/mailman/listinfo/paraview
> > > >>
> > > > _______________________________________________
> > > > Powered by www.kitware.com
> > > >
> > > > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > > >
> > > > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > > >
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://www.paraview.org/mailman/listinfo/paraview
> > ------- End of Original Message -------
> >
> > _______________________________________________
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
> >
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
------- End of Original Message -------
More information about the ParaView
mailing list