[Paraview] Paraview 3.8 RC2 makes the whole X restart

[Paul McIntosh]

You might find some clues in the /var/log/Xorg.0.log and Xorg.0.log.old

As far has glx, I'd still update/downgrade the OpenGL driver even just to
rule that out.

Paul

-----Original Message-----
From: Josef Dubsky [mailto:josef.dubsky at gcsc.uni-frankfurt.de] 
Sent: Friday, 14 May 2010 7:24 PM
To: 'Paul McIntosh'; 'Rick Angelini'
Cc: paraview at paraview.org
Subject: RE: [Paraview] Paraview 3.8 RC2 makes the whole X restart

Well, I can confirm the problem doesn't occur with 3.6.2 (using the
precompiled vision, downloaded directly from the web). However the 3.8 RC2
(also the precompiled version from the web) does crash after some time
exactly as the 3.7CVS does.
So I think this shouldn't be a glx issue, right?

Josef

-----Original Message-----
From: Paul McIntosh [mailto:paul.mcintosh at internetscooter.com]
Sent: Friday, May 14, 2010 12:58 AM
To: 'Rick Angelini'; 'Josef Dubsky'
Cc: paraview at paraview.org
Subject: RE: [Paraview] Paraview 3.8 RC2 makes the whole X restart

Another thought - just try the precompiled RC2 binaries and see what the
difference is.

I also agree with checking the driver, the last issue I had was caused by
this (an upgrade fixed it).

For the list - are there any debug options that make ParaView print/log what
it is doing? E.g. export DEBUG_INFO=TRUE 

There seems to be a few instances like this where something goes wrong and
there is no information. Even if there isn't ParaView should make use of the
QStatusBar to give some hints.
 
Cheers,

Paul
-----Original Message-----
From: Rick Angelini [mailto:rick.angelini at us.army.mil]
Sent: Thursday, 13 May 2010 10:39 PM
To: Josef Dubsky
Cc: 'Paul McIntosh'; paraview at paraview.org
Subject: Re: [Paraview] Paraview 3.8 RC2 makes the whole X restart

Any chance you have a GL driver issue? Was your driver updated recently? 
Can you *still* run 3.6.2 without problems?

Josef Dubsky wrote:
>
> Hi Paul,
>
> Thanks for your hint, but I do have enough disk space (~10 GB). I've 
> already tried to look in /var/log/ but didn't really find anything 
> suspicious.
>
> The strange thing is that it never happened with 3.6.2 or 3.6.1. The 
> problem started to appear as of 3.7 (which I compiled from source) and 
> remains also for 3.8 RC2 too
>
> Josef
>
> *From:* Paul McIntosh [mailto:paul.mcintosh at internetscooter.com]
> *Sent:* Thursday, May 13, 2010 1:23 PM
> *To:* 'Josef Dubsky'
> *Subject:* RE: [Paraview] Paraview 3.8 RC2 makes the whole X restart
>
> A thought - do you have enough disk space? I am using 3.8 RC1/2 on 
> Centos 5.5 with no issues. However I have noticed that if you run out 
> of disk space, you get no warning and the session just crashes. Maybe 
> ParaView is generating some file (swap?) that pushes your system to 
> the limit of disk.
>
> I am not sure how to debug ParaView (yet) so I don't know if there is 
> anything in the /var/log directory to look for.
>
> Paul
>
> ----------------------------------------------------------------------
> --
>
> *From:* paraview-bounces at paraview.org 
> [mailto:paraview-bounces at paraview.org] *On Behalf Of *Josef Dubsky
> *Sent:* Thursday, 13 May 2010 8:37 PM
> *To:* paraview at paraview.org
> *Subject:* [Paraview] Paraview 3.8 RC2 makes the whole X restart
>
> Dear all,
>
> I have the following problem with Paraview 3.8 RC2. Actually the 
> problem already appeared with the version 3.7 which I built from 
> source. However, as it was a development version, I thought there 
> might be still some bugs. But the 3.8 RC2 which I've installed just 
> today behaves the same.
>
> So the problem is the following: After a few minutes (can really reach 
> from ~30 seconds to ~20 minutes) of working with Paraview suddenly my 
> whole Linux session restarts and I have to login again. Of course by 
> this I lose all the opened applications (not just Paraview), which is 
> pretty bad.
>
> There's no real way, how to exactly reproduce the problem. I mean the 
> time when the crash occurs seems more or less random. But after max 
> ~30 mins of working with Paraview, you can be almost sure it crashes.
>
> The only thing I can say is, that if I just leave Paraview minimized 
> and do something else, the crash doesn't occur. Thus it really happens 
> only if you actively do something in Paraview.
>
> I'm using CentOS 5.5.
>
> Are there any logs or error messages you could help to analyze the 
> situation more? I'm not sure where I could find something relevant.
>
> Regards
>
> Josef
>
> ----------------------------------------------------------------------
> --
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at 
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: 
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>