[Paraview] Tecplot reader error
Zhanping Liu
zhanping.liu at kitware.com
Fri Mar 5 20:12:17 EST 2010
da;
I will fix it.
-Zhanping
On Fri, Mar 5, 2010 at 7:28 PM, da <remywendy at gmail.com> wrote:
> Hi folks.
>
> I ran into this problem recently with STRANDID/TIMESOLUTION as well. For my
> files, they are automatically added even though there is no data for them.
>
> STRANDID=0, SOLUTIONTIME=0
>
> A simple solution for me was to just eat up the token for them...
>
> if ( tok == "STRANDID" )
> {
> vtkErrorMacro( << this->FileName << "; Tecplot zone record
> parameter "
> << "'STRANDID' is currently unsupported." );
> *** this->Internal->GetNextToken();*
> }
> else
> if ( tok == "SOLUTIONTIME" )
> {
> vtkErrorMacro( << this->FileName << "; Tecplot zone record
> parameter "
> << "'SOLUTIONTIME' is currently unsupported." );
> *** this->Internal->GetNextToken();*
> }
>
> and it'll just continue as if nothing was going on. Otherwise, the loop
> exits the zone area and gives you a ton of errors.
>
>
> On Wed, Nov 25, 2009 at 10:12 AM, Zhanping Liu <zhanping.liu at kitware.com>wrote:
>
>> Hi Fred:
>>
>> Is that convenient for me to have a copy of the whole tecplot file
>> (including the actual zone data in addition to the zone title)? Then I will
>> be glad to check the problem by removing the time-series tokens (STRANDID
>> and TIMESOLUTION) first. There seem to be other tokens indicating some
>> functionalities that the current simplified reader does not support yet.
>>
>> Thanks.
>>
>> -Zhanping
>>
>> On Wed, Nov 25, 2009 at 6:47 AM, Fred Fred <stan1313 at hotmail.fr> wrote:
>>
>>>
>>> Actually this is not a time varying series but there are several zones:
>>>
>>>
>>> ZONE T="domain1"
>>> STRANDID=0, SOLUTIONTIME=0
>>> I=43, J=45, K=5, ZONETYPE=Ordered
>>> DATAPACKING=BLOCK
>>> VARLOCATION=([4-12]=CELLCENTERED)
>>> AUXDATA CGNS.CGNSBase_t="Base#1"
>>> AUXDATA CGNS.Zone_t="domain1"
>>> DT=(DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE
>>> DOUBLE DOUBLE DOUBLE )
>>> 4.352440754E-02 4.352440754E-02 4.352440754E-02 4.352440754E-02
>>> 4.352440754E-02
>>> [...]
>>> 1.710705371E+01 1.603499243E+01
>>> ZONE T="domain3"
>>> STRANDID=0, SOLUTIONTIME=0
>>> I=49, J=89, K=9, ZONETYPE=Ordered
>>>
>>> DATAPACKING=BLOCK
>>> VARLOCATION=([4-12]=CELLCENTERED)
>>> AUXDATA CGNS.CGNSBase_t="Base#1"
>>> AUXDATA CGNS.Zone_t="domain3"
>>> DT=(DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE
>>> DOUBLE DOUBLE DOUBLE )
>>> -1.454322089E-02 -1.453761256E-02 -1.452607960E-02 -1.450552743E-02
>>> -1.447481920E-02
>>> [...]
>>>
>>> and always the same time value : STRANDID=0, SOLUTIONTIME=0
>>> I tried to withdraw this line everywhere but I get another error:
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25249ca0):
>>> /Users/wifridlefer/Data/TM/Jalon2/CAS_MT2.dat: The record type
>>> -1.988960529E-02 found in the file is unknown.
>>>
>>> Any idea?
>>>
>>>
>>> ------------------------------
>>> Date: Fri, 20 Nov 2009 11:55:55 -0500
>>>
>>> Subject: Re: [Paraview] Tecplot reader error
>>> From: zhanping.liu at kitware.com
>>> To: agagliardi at ara.co.uk
>>> CC: stan1313 at hotmail.fr; paraview at paraview.org
>>>
>>>
>>> Adriano:
>>>
>>> You are correct.
>>>
>>> This ad-hoc way works by means of vtkFileSeriesReader.cxx.
>>>
>>> Thanks.
>>>
>>> -Zhanping
>>>
>>> On Fri, Nov 20, 2009 at 11:48 AM, Adriano Gagliardi <
>>> agagliardi at ara.co.uk> wrote:
>>>
>>> Zhanping,
>>>
>>> This method will not allow you to use any of the time-dependent filters,
>>> right (like FFT)?
>>>
>>> Adriano
>>>
>>> ===================================
>>>
>>> Adriano Gagliardi MEng PhD
>>> Project Scientist
>>> Computational Aerodynamics
>>> Aircraft Research Association Ltd.
>>> Manton Lane
>>> Bedford
>>>
>>> Tel: 01234 32 4644
>>> E-mail: agagliardi at ara.co.uk
>>> Url: www.ara.co.uk
>>>
>>>
>>> ------------------------------
>>> *From:* paraview-bounces at paraview.org [mailto:
>>> paraview-bounces at paraview.org] *On Behalf Of *Zhanping Liu
>>> *Sent:* 20 November 2009 16:35
>>> *To:* Fred Fred
>>> *Cc:* paraview at paraview.org
>>> *Subject:* Re: [Paraview] Tecplot reader error
>>>
>>> Fred:
>>>
>>> The problem was actually caused by "STRANDID=0, SOLUTIONTIME=0".
>>> Currently the Tecplot reader, a simplified version, does not support loading
>>> time series data. If you really want load multiple time steps of data, you
>>> need to remove these two tokens from the zone header(s). And you need put
>>> each time step as an individual file, e.g., file000.tec, file001.tec, ...
>>> and et al. Then you can select all of them by means of 'file*.tec' when
>>> opening the file dialog. In this way, you will still be able to view the
>>> dataset at multiple steps.
>>>
>>> Sorry for the lack of time series data support and we are considering
>>> if we need to add it.
>>>
>>> Thanks.
>>>
>>> -Zhanping
>>>
>>> On Fri, Nov 20, 2009 at 10:08 AM, Zhanping Liu <zhanping.liu at kitware.com
>>> > wrote:
>>>
>>> Fred:
>>>
>>> I will fix it.
>>>
>>> Thanks.
>>>
>>> -Zhanping
>>>
>>> On Fri, Nov 20, 2009 at 9:13 AM, Fred Fred <stan1313 at hotmail.fr>wrote:
>>>
>>> I am not a tecplot file format specialist but I need to read such
>>> files provided by other people.
>>> The header of my file is as follow:
>>>
>>> TITLE = "Translation of CGNS file elsAoutput.cgns"
>>> VARIABLES = "CoordinateX"
>>> "CoordinateY"
>>> "CoordinateZ"
>>> "TurbulentDissipation"
>>> "Density"
>>> "TurbulentDistance"
>>> "TurbulentDistanceIndex"
>>> "EnergyStagnationDensity"
>>> "MomentumZ"
>>> "MomentumY"
>>> "MomentumX"
>>> "TurbulentEnergyKineticDensity"
>>> DATASETAUXDATA Common.DensityVar="5"
>>> DATASETAUXDATA Common.StagnationEnergyVar="8"
>>> DATASETAUXDATA Common.TurbulentDissipationRateVar="4"
>>> DATASETAUXDATA Common.UVar="11"
>>> DATASETAUXDATA Common.VectorVarsAreVelocity="FALSE"
>>> DATASETAUXDATA Common.VVar="10"
>>> DATASETAUXDATA Common.WVar="9"
>>> ZONE T="domain1"
>>> STRANDID=0, SOLUTIONTIME=0
>>> I=43, J=45, K=5, ZONETYPE=Ordered
>>> DATAPACKING=BLOCK
>>> VARLOCATION=([4-12]=CELLCENTERED)
>>> AUXDATA CGNS.CGNSBase_t="Base#1"
>>> AUXDATA CGNS.Zone_t="domain1"
>>>
>>> I get this errors:
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> DATAPACKING found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type BLOCK
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> VARLOCATION found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type [4-12]
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> CELLCENTERED found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type AUXDATA
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> CGNS.CGNSBASE_T found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type Base#1
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type AUXDATA
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> CGNS.ZONE_T found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type domain1
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DT
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE
>>> found in the file is unknown.
>>>
>>> So it seems that the line "DATAPACKING=BLOCK" raises problem.
>>> Any help?
>>>
>>>
>>> ------------------------------
>>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici !<http://www.hotmailmagicmoment.com/>
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://www.paraview.org/mailman/listinfo/paraview
>>>
>>>
>>>
>>>
>>> --
>>> Zhanping Liu, PhD
>>> Kitware, Inc.
>>> 28 Corporate Drive
>>> Clifton Park, NY 12065-8662
>>> Phone: 518-371-3971 x 138
>>> http://www.zhanpingliu.org
>>>
>>>
>>>
>>>
>>> --
>>> Zhanping Liu, PhD
>>> Kitware, Inc.
>>> 28 Corporate Drive
>>> Clifton Park, NY 12065-8662
>>> Phone: 518-371-3971 x 138
>>> http://www.zhanpingliu.org
>>> ---------------------------
>>> This email contains information that is private and confidential and is
>>> intended only for the addressee. If you are not the intended recipient
>>> please delete it and notify us immediately by e-mailing the sender.
>>> Note: All email sent to or from this address may be accessed by someone
>>> other than the recipient, for system management and security reasons.
>>> Aircraft Research Association Ltd. Registered in England, Registration No
>>> 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB
>>> 196351245
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Zhanping Liu, PhD
>>> Kitware, Inc.
>>> 28 Corporate Drive
>>> Clifton Park, NY 12065-8662
>>> Phone: 518-371-3971 x 138
>>> http://www.zhanpingliu.org
>>>
>>> ------------------------------
>>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici !<http://www.hotmailmagicmoment.com/>
>>>
>>
>>
>>
>> --
>> Zhanping Liu, PhD
>> Kitware, Inc.
>> 28 Corporate Drive
>> Clifton Park, NY 12065-8662
>> Phone: 518-371-3971 x 138
>> http://www.zhanpingliu.org
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview
>>
>>
>
--
Zhanping Liu, PhD
Kitware, Inc.
28 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-371-3971 x 138
http://www.zhanpingliu.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20100305/5956d03f/attachment-0001.htm>
More information about the ParaView
mailing list