[Paraview] Tecplot reader error

Fri Nov 20 11:55:55 EST 2009

Adriano:

   You are correct.

   This ad-hoc way works by means of vtkFileSeriesReader.cxx.

   Thanks.

   -Zhanping

On Fri, Nov 20, 2009 at 11:48 AM, Adriano Gagliardi <agagliardi at ara.co.uk>wrote:

>  Zhanping,
>
> This method will not allow you to use any of the time-dependent filters,
> right (like FFT)?
>
> Adriano
>
>
> ===================================
>
> Adriano Gagliardi MEng PhD
> Project Scientist
> Computational Aerodynamics
> Aircraft Research Association Ltd.
> Manton Lane
> Bedford
>
> Tel: 01234 32 4644
> E-mail: agagliardi at ara.co.uk
> Url: www.ara.co.uk
>
>
>  ------------------------------
> *From:* paraview-bounces at paraview.org [mailto:
> paraview-bounces at paraview.org] *On Behalf Of *Zhanping Liu
> *Sent:* 20 November 2009 16:35
> *To:* Fred Fred
> *Cc:* paraview at paraview.org
> *Subject:* Re: [Paraview] Tecplot reader error
>
>   Fred:
>
>    The problem was actually caused by "STRANDID=0, SOLUTIONTIME=0".
> Currently the Tecplot reader, a simplified version, does not support loading
> time series data. If you really want load multiple time steps of data, you
> need to remove these two tokens from the zone header(s). And you need put
> each time step as an individual file, e.g., file000.tec, file001.tec, ...
> and et al. Then you can select all of them by means of 'file*.tec' when
> opening the file dialog. In this way, you will still be able to view the
> dataset at multiple steps.
>
>    Sorry for the lack of time series data support and we are considering if
> we need to add it.
>
>   Thanks.
>
>   -Zhanping
>
> On Fri, Nov 20, 2009 at 10:08 AM, Zhanping Liu <zhanping.liu at kitware.com>wrote:
>
>> Fred:
>>
>>    I will fix it.
>>
>>   Thanks.
>>
>>   -Zhanping
>>
>>   On Fri, Nov 20, 2009 at 9:13 AM, Fred Fred <stan1313 at hotmail.fr> wrote:
>>
>>>   I am not a tecplot file format specialist but I need to read such
>>> files provided by other people.
>>> The header of my file is as follow:
>>>
>>> TITLE     = "Translation of CGNS file elsAoutput.cgns"
>>> VARIABLES = "CoordinateX"
>>> "CoordinateY"
>>> "CoordinateZ"
>>> "TurbulentDissipation"
>>> "Density"
>>> "TurbulentDistance"
>>> "TurbulentDistanceIndex"
>>> "EnergyStagnationDensity"
>>> "MomentumZ"
>>> "MomentumY"
>>> "MomentumX"
>>> "TurbulentEnergyKineticDensity"
>>> DATASETAUXDATA Common.DensityVar="5"
>>> DATASETAUXDATA Common.StagnationEnergyVar="8"
>>> DATASETAUXDATA Common.TurbulentDissipationRateVar="4"
>>> DATASETAUXDATA Common.UVar="11"
>>> DATASETAUXDATA Common.VectorVarsAreVelocity="FALSE"
>>> DATASETAUXDATA Common.VVar="10"
>>> DATASETAUXDATA Common.WVar="9"
>>> ZONE T="domain1"
>>>  STRANDID=0, SOLUTIONTIME=0
>>>  I=43, J=45, K=5, ZONETYPE=Ordered
>>>  DATAPACKING=BLOCK
>>>  VARLOCATION=([4-12]=CELLCENTERED)
>>>  AUXDATA CGNS.CGNSBase_t="Base#1"
>>>  AUXDATA CGNS.Zone_t="domain1"
>>>
>>> I get this errors:
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> DATAPACKING found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type BLOCK
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> VARLOCATION found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type [4-12]
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> CELLCENTERED found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type AUXDATA
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> CGNS.CGNSBASE_T found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type Base#1
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type AUXDATA
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type
>>> CGNS.ZONE_T found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type domain1
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DT
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE
>>> found in the file is unknown.
>>>
>>>
>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714
>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE
>>> found in the file is unknown.
>>>
>>> So it seems that the line "DATAPACKING=BLOCK" raises problem.
>>> Any help?
>>>
>>>
>>> ------------------------------
>>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici !<http://www.hotmailmagicmoment.com/>
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://www.paraview.org/mailman/listinfo/paraview
>>>
>>>
>>
>>
>> --
>> Zhanping Liu, PhD
>> Kitware, Inc.
>> 28 Corporate Drive
>> Clifton Park, NY 12065-8662
>> Phone: 518-371-3971 x 138
>> http://www.zhanpingliu.org
>>
>
>
>
> --
> Zhanping Liu, PhD
> Kitware, Inc.
> 28 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-371-3971 x 138
> http://www.zhanpingliu.org
>
> ---------------------------
>
> This email contains information that is private and confidential and is
> intended only for the addressee. If you are not the intended recipient
> please delete it and notify us immediately by e-mailing the sender.
>
> Note: All email sent to or from this address may be accessed by someone
> other than the recipient, for system management and security reasons.
>
> Aircraft Research Association Ltd. Registered in England, Registration No
> 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB
> 196351245
>
>
>
>
>

-- 
Zhanping Liu, PhD
Kitware, Inc.
28 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-371-3971 x 138
http://www.zhanpingliu.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20091120/ded22c40/attachment-0001.htm>