[Paraview] client/server error for large superquadrics
Glanfield, Wayne
Wayne.Glanfield at uk.renaultf1.com
Thu Jun 14 04:48:52 EDT 2007
Ok, we are now up and running, now we just need a data reader to get our
data in.
It's probably worth describing the issues I have had to overcome or
understand in order to get this working for other people just starting
out trying to get parallel rendering working as I am probably running a
different setup to what most people may be using - I think.
The first problem was the DISPLAY environment variable on the remote
linux graphics workstations not pointing to the IP address of my laptop,
in addition my laptop is running windows and the Xming X server, Xming
has a toggle to turn off access control, this needs to be done or
configured to allow remote clients to display. I guess doing this is the
equivalent of xhost + so probably not the best thing to do but hey.
Thanks to everyone who pointed me in the right direction.
-----Original Message-----
From: Wylie, Brian [mailto:bnwylie at sandia.gov]
Sent: 13 June 2007 15:27
To: Glanfield, Wayne; Moreland, Kenneth; paraview at paraview.org
Subject: RE: [Paraview] client/server error for large superquadrics
Wayne,
Super duper!
Okay now that we got the problem figured out... read Ken's email on how
to fix the problem... :)
You really should have large data rendered on the server side (that's
the whole point of the parallel rendering that people put lots of work
into...)
Otherwise, as you said, large data will be rendered very slowly... :)
Brian Wylie - Org 1424
Sandia National Laboratories
MS 0822 - Building 880/A1-J
(505)844-2238 FAX(505)845-0833
_______ __
/_ __(_) /_____ _____
/ / / / __/ __ `/ __ \
/ / / / /_/ /_/ / / / /
/_/ /_/\__/\__,_/_/ /_/
VTK Informatics Toolkit
> -----Original Message-----
> From: Glanfield, Wayne [mailto:Wayne.Glanfield at uk.renaultf1.com]
> Sent: Wednesday, June 13, 2007 8:10 AM
> To: Wylie, Brian; Moreland, Kenneth; paraview at paraview.org
> Subject: RE: [Paraview] client/server error for large superquadrics
>
> Thanks Brian,
>
> With compositing turned off the large superquadric is
> rendered ok, albeit relatively slowly.
>
> With compositing turned on and set to OMB the error occurs.
>
> Increasing the Compositing Threshold to 100MB allows me to generate a
> 1024x1024 superquadric.
>
> Regards
> Wayne
>
> -----Original Message-----
> From: Wylie, Brian [mailto:bnwylie at sandia.gov]
> Sent: 13 June 2007 14:26
> To: Glanfield, Wayne; Moreland, Kenneth; paraview at paraview.org
> Subject: RE: [Paraview] client/server error for large superquadrics
>
> Wayne,
>
> This looks like a 'compositing threshold' issue.
>
> On smaller datasets the geometry actually gets sent to the
> client, on larger datasets the server will try to render the
> geometry and then send images to the client.
>
> So
> 1) Turn compositing off... See if you can render the large dataset
> 2) Turn compositing on and set the threshold to 0MB (meaning
> that compositing is always on no matter the size of the data)
> and see if you get the same crash on the small dataset.
>
> Let us know what happens, :)
>
>
> Brian Wylie - Org 1424
> Sandia National Laboratories
> MS 0822 - Building 880/A1-J
> (505)844-2238 FAX(505)845-0833
> _______ __
> /_ __(_) /_____ _____
> / / / / __/ __ `/ __ \
> / / / / /_/ /_/ / / / /
> /_/ /_/\__/\__,_/_/ /_/
> VTK Informatics Toolkit
>
>
>
>
>
> ________________________________
>
> From: paraview-bounces+bnwylie=sandia.gov at paraview.org
> [mailto:paraview-bounces+bnwylie=sandia.gov at paraview.org] On
> Behalf Of Glanfield, Wayne
> Sent: Wednesday, June 13, 2007 6:56 AM
> To: Moreland, Kenneth; paraview at paraview.org
> Subject: RE: [Paraview] client/server error for large
> superquadrics
>
>
>
> Hi Kenneth,
>
>
>
> Thanks for your reply, I'm not quite sure I understand
> what you are saying here when you say open up the X host to
> mpi, as it appears to be working for small superquadrics,
> looking back at my original email its probably not clear what
> I was trying to explain.
>
>
>
> I am running the paraview 3.0.1 client from my laptop
> and doing a manual reverse connection from the remote data
> server (sl-cfd-08) and remote render server (sl-cfd-08) both
> of which appear to have to run on the same machine for this
> to work. To test the configuration I have been generating
> superquadric sources. This works for smaller resolution value
> i.e. 256x256, but fails when using the larger values. The
> fact that this configuration appears to work makes me think
> that the setup is ok.
>
>
>
> The following is the output once the connections are
> made, and the error when using larger resolution values;
>
>
>
> sl-cfd-08:~ # clear; /usr/local/mpich-1.2.7/ch_p4/bin/mpirun -np
> 6 -machinefile /apps/CFD/machinefile
> /apps/CFD/paraview-3.0.1/bin/pvdataserver -rc -ch=10.1.114.8
>
> Connected to client
>
> WaitForConnection: id :0 Port:50125
>
> Received Hello from process 0
>
> WaitForConnection: id :2 Port:44046
>
> Received Hello from process 2
>
> WaitForConnection: id :1 Port:43025
>
> Received Hello from process 1
>
>
>
> sl-cfd-08:~ # clear; /usr/local/mpich-1.2.7/ch_p4/bin/mpirun -np
> 4 -machinefile /apps/CFD/machinefile
> /apps/CFD/paraview-3.0.1/bin/pvrenderserver -rc -ch=10.1.114.8
>
> WaitForConnection: id :3 Port:33852
>
> RenderServer: Connected to client
>
> Connect: id :0 host: localhost Port:50125
>
> Connect: id :2 host: localhost Port:44046
>
> Connect: id :3 host: localhost Port:33852
>
> Connect: id :1 host: localhost Port:43025
>
> Process id: 1 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x56d190): bad X server connection.
> DISPLAY=p1_12661: p4_error: interrupt SIGSEGV: 11
>
> Process id: 2 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x56d190): bad X server connection.
> DISPLAY=p2_26245: p4_error: interrupt SIGSEGV: 11
>
> Process id: 3 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x56d190): bad X server connection.
> DISPLAY=p3_29085: p4_error: interrupt SIGSEGV: 11
>
> rm_l_2_26250: (62.367188) net_send: could not write to
> fd=5, errno = 32
>
> rm_l_1_12666: (63.015625) net_send: could not write to
> fd=5, errno = 32
>
> rm_l_3_29090: (61.468750) net_send: could not write to
> fd=5, errno = 32
>
> sl-cfd-08:~ #
>
> Received Hello from process 3
>
>
>
>
>
> Wayne
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ________________________________
>
> From: Moreland, Kenneth [mailto:kmorel at sandia.gov]
> Sent: 12 June 2007 14:32
> To: Glanfield, Wayne; paraview at paraview.org
> Subject: RE: [Paraview] client/server error for large
> superquadrics
>
>
>
> It looks like your server is crashing because it is
> trying to open a connection to the local X host and is
> failing. You should be able to correct this by either
> opening up the X host to the mpi job or compiling with OSMesa
> (in which case the -use-offscreen-rendering will prevent a
> connection any X host).
>
>
>
> On a larger issue, ParaView 2 was able to correctly
> detect this, give a warning to the user at the client, and
> perform all rendering locally on the client. Has this
> functionality gone away with ParaView 3? If so, we need to
> bring it back.
>
>
>
> -Ken
>
>
>
> ________________________________
>
> From: paraview-bounces+kmorel=sandia.gov at paraview.org
> [mailto:paraview-bounces+kmorel=sandia.gov at paraview.org] On
> Behalf Of Glanfield, Wayne
> Sent: Tuesday, June 05, 2007 3:12 AM
> To: paraview at paraview.org
> Subject: [Paraview] client/server error for large superquadrics
>
>
>
> I am experiencing a problem with Paraview 3.0.1 when
> generating large i.e. 1024x1024 Superquadric sources when
> testing client/server mode. Smaller values e.g. 1024x16 or
> 128x128 for example work ok. Large values i.e. 1024x1024 in
> local mode work ok. I have installed the repository version
> of PV3 and MPICH-1.2.7 and everything appeared to installed
> correctly. I have tried it with and without offscreen
> rendering. Clients and servers have the foillowing
> configuration, SUN Ultra 40, AMD Opteron, SLED10.1 with
> NVIDIA Quadro FX 3450 GPU with the latest NVIDIA drivers
>
>
>
> Does anyone have any ideas why this is happening?
>
>
>
> Regards
>
> Wayne
>
>
>
> I receive the following client and server errors
>
>
>
> CLIENT
>
>
>
> ERROR: In
> /apps/CFD/ParaView3/Servers/Common/vtkServerConnection.cxx, line 67
>
> vtkServerConnection (0xedd500): Server Connection Closed!
>
>
>
> SERVER (MPI MASTER)
>
>
>
> l-cfd-08:/apps/CFD/downloads/mpi/mpich-1.2.7p1 #
> /usr/local/mpich-1.2.7/ch_p4/bin/mpirun -np 8 -machinefile
> /apps/CFD/machinefile /apps/CFD/paraview-3.0.1/bin/pvserver -rc
> -ch=sl-cfd-07 --connect-id=11111 --use-offscreen-rendering
>
> Connected to client
>
> Process id: 2 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fedd0): bad X server connection.
> DISPLAY=p2_5680: p4_error: interrupt SIGSEGV: 11
>
> rm_l_2_5685: (81.078125) net_send: could not write to
> fd=5, errno = 32
>
> Process id: 6 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fea00): bad X server connection.
> DISPLAY=p6_5698: p4_error: interrupt SIGSEGV: 11
>
> Process id: 1 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fea00): bad X server connection.
> DISPLAY=Process id: 3 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fea00): bad X server connection.
> DISPLAY=Process id: 5 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fea00): bad X server connection.
> DISPLAY=Process id: 4 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fea00): bad X server connection.
> DISPLAY=p4_5689: p4_error: interrupt SIGSEGV: 11
>
> Process id: 7 >> ERROR: In
> /apps/CFD/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
> line 1376
>
> vtkXOpenGLRenderWindow (0x7fea00): bad X server connection.
> DISPLAY=p7_3036: p4_error: interrupt SIGSEGV: 11
>
> rm_l_7_3041: (77.406250) net_send: could not write to
> fd=5, errno = 32
>
> p1_3015: p4_error: interrupt SIGSEGV: 11
>
> rm_l_1_3020: (82.078125) net_send: could not write to
> fd=5, errno = 32
>
> p5_3029: p4_error: interrupt SIGSEGV: 11
>
> p3_3022: p4_error: interrupt SIGSEGV: 11
>
> rm_l_3_3027: (80.535156) net_send: could not write to
> fd=5, errno = 32
>
> rm_l_6_5703: (78.105469) net_send: could not write to
> fd=5, errno = 32
>
> rm_l_4_5694: (79.593750) net_send: could not write to
> fd=5, errno = 32
>
> rm_l_5_3034: (79.039062) net_send: could not write to
> fd=5, errno = 32
>
> sl-cfd-08:/apps/CFD/downloads/mpi/mpich-1.2.7p1 # p2_5680:
> (85.132812) net_send: could not write to fd=5, errno = 32
>
> p5_3029: (89.078125) net_send: could not write to fd=5, errno =
> 32
>
> p7_3036: (87.464844) net_send: could not write to fd=5, errno =
> 32
>
> p6_5698: (88.152344) net_send: could not write to fd=5, errno =
> 32
>
> p3_3022: (90.593750) net_send: could not write to fd=5, errno =
> 32
>
> p4_5689: (89.652344) net_send: could not write to fd=5, errno =
> 32
>
> p1_3015: (94.136719) net_send: could not write to fd=5, errno =
> 32
>
>
>
>
>
> The following information is a list of processes which
> are running when I manually setup the client and servers;
>
>
>
>
>
> CLIENT SL-CFD-07
>
>
>
> root 27926 2.1 1.0 246744 85764 pts/1 SL+ 09:32 0:12
> /apps/CFD/paraview-3.0.1/bin/paraview --connect-id=11111
>
>
>
>
>
> MPI MASTER SERVER 1 (SL-CFD-08)
>
>
>
> sl-cfd-08:/apps/CFD/downloads/mpi/mpich-1.2.7p1 #
> /usr/local/mpich-1.2.7/ch_p4/bin/mpirun -np 8 -machinefile
> /apps/CFD/machinefile /apps/CFD/paraview-3.0.1/bin/pvserver -rc
> -ch=sl-cfd-07 --connect-id=11111 --use-offscreen-rendering
>
> Connected to client
>
>
>
>
>
> root 4737 0.0 0.0 8336 1684 pts/3 S+ 09:36 0:00
> /bin/sh /usr/local/mpich-1.2.7/ch_p4/bin/mpirun -np 8
> -machinefile /apps/CFD/machinefile /apps/CFD/paraview-3
>
> root 4968 0.3 0.2 161004 36668 pts/3 S+ 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver -rc -ch=sl-cfd-07
> --connect-id=11111 --use-offscreen-rendering -p4pg /r
>
> root 4969 0.0 0.0 156904 5632 pts/3 S+ 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver -rc -ch=sl-cfd-07
> --connect-id=11111 --use-offscreen-rendering -p4pg /r
>
> root 4970 0.0 0.0 6388 676 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-09 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4971 0.0 0.0 6388 672 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-08 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4972 0.0 0.0 24840 1216 ? Ss 09:36 0:00
> in.rshd -aL
>
> root 4973 0.2 0.2 160308 36396 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-08 -p4rmrank 2
>
> root 4978 0.0 0.0 6388 676 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-09 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4979 0.0 0.0 156344 5952 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-08 -p4rmrank 2
>
> root 4980 0.0 0.0 6388 676 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-08 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4981 0.0 0.0 24836 1208 ? Ss 09:36 0:00
> in.rshd -aL
>
> root 4982 0.2 0.2 160312 36392 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-08 -p4rmrank 4
>
> root 4987 0.0 0.0 6384 676 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-09 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4988 0.0 0.0 156348 5956 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-08 -p4rmrank 4
>
> root 4989 0.0 0.0 6384 676 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-08 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4990 0.0 0.0 24844 1212 ? Ss 09:36 0:00
> in.rshd -aL
>
> root 4991 0.2 0.2 160308 36388 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-08 -p4rmrank 6
>
> root 4996 0.0 0.0 6384 672 pts/3 S+ 09:36 0:00
> /usr/bin/rsh sl-cfd-09 -l root -n
> /apps/CFD/paraview-3.0.1/bin/pvserver
> sl-cfd-08 58395 \-p4amslave \-p4yourn
>
> root 4997 0.0 0.0 156344 5956 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-08 -p4rmrank 6
>
>
>
>
>
> SERVER 2 (SL-CFD-09)
>
>
>
> root 2984 6.5 0.2 160308 36396 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 1
>
> root 2989 0.0 0.0 156344 5180 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 1
>
> root 2990 0.0 0.0 24840 1216 ? Ss 09:36 0:00
> in.rshd -aL
>
> root 2991 7.2 0.2 160308 36392 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 3
>
> root 2996 0.0 0.0 156344 5956 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 3
>
> root 2997 0.0 0.0 24848 1216 ? Ss 09:36 0:00
> in.rshd -aL
>
> root 2998 8.7 0.2 160312 36396 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 5
>
> root 3003 0.0 0.0 156348 5964 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 5
>
> root 3004 0.0 0.0 24848 1216 ? Ss 09:36 0:00
> in.rshd -aL
>
> root 3005 10.0 0.2 160312 36392 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 7
>
> root 3010 0.0 0.0 156348 5960 ? S 09:36 0:00
> /apps/CFD/paraview-3.0.1/bin/pvserver sl-cfd-08 58395 4amslave
> -p4yourname sl-cfd-09 -p4rmrank 7
>
>
>
>
>
>
>
>
> ---------------------------------------------------------------------
>
> For further information on the Renault F1 Team visit
> our web site at www.renaultf1.com.
> Renault F1 Team Limited
> Registered in England no. 1806337
> Registered Office: 16 Old Bailey London EC4M 7EG
>
>
> WARNING: please ensure that you have adequate virus
> protection in place before you open or detach any documents
> attached to this email.
>
> This e-mail may constitute privileged information. If
> you are not the intended recipient, you have received this
> confidential email and any attachments transmitted with it in
> error and you must not disclose copy, circulate or in any
> other way use or rely on this information.
>
> E-mails to and from the Renault F1 Team are monitored
> for operational reasons and in accordance with lawful
> business practices.
>
> The contents of this email are those of the individual
> and do not necessarily represent the views of the company.
>
> Please note that this e-mail has been created in the
> knowledge that Internet e-mail is not a 100% secure
> communications medium. We advise that you understand and
> observe this lack of security when e-mailing us.
>
> If you have received this email in error please forward to:
> is.helpdesk at uk.renaultf1.com quoting the sender, then delete
> the message and any attached documents
>
> ---------------------------------------------------------------------
>
> ---------------------------------------------------------------------
>
> For further information on the Renault F1 Team visit
> our web site at www.renaultf1.com.
> Renault F1 Team Limited
> Registered in England no. 1806337
> Registered Office: 16 Old Bailey London EC4M 7EG
>
>
> WARNING: please ensure that you have adequate virus
> protection in place before you open or detach any documents
> attached to this email.
>
> This e-mail may constitute privileged information. If
> you are not the intended recipient, you have received this
> confidential email and any attachments transmitted with it in
> error and you must not disclose copy, circulate or in any
> other way use or rely on this information.
>
> E-mails to and from the Renault F1 Team are monitored
> for operational reasons and in accordance with lawful
> business practices.
>
> The contents of this email are those of the individual
> and do not necessarily represent the views of the company.
>
> Please note that this e-mail has been created in the
> knowledge that Internet e-mail is not a 100% secure
> communications medium. We advise that you understand and
> observe this lack of security when e-mailing us.
>
> If you have received this email in error please forward to:
> is.helpdesk at uk.renaultf1.com quoting the sender, then delete
> the message and any attached documents
>
> ---------------------------------------------------------------------
>
> ---------------------------------------------------------------------
>
> For further information on the Renault F1 Team visit our web
> site at www.renaultf1.com.
> Renault F1 Team Limited
> Registered in England no. 1806337
> Registered Office: 16 Old Bailey London EC4M 7EG
>
>
> WARNING: please ensure that you have adequate virus
> protection in place before you open or detach any documents
> attached to this email.
>
> This e-mail may constitute privileged information. If you are
> not the intended recipient, you have received this
> confidential email and any attachments transmitted with it in
> error and you must not disclose copy, circulate or in any
> other way use or rely on this information.
>
> E-mails to and from the Renault F1 Team are monitored for
> operational reasons and in accordance with lawful business practices.
>
> The contents of this email are those of the individual and do
> not necessarily represent the views of the company.
>
> Please note that this e-mail has been created in the
> knowledge that Internet e-mail is not a 100% secure
> communications medium. We advise that you understand and
> observe this lack of security when e-mailing us.
>
> If you have received this email in error please forward to:
> is.helpdesk at uk.renaultf1.com quoting the sender, then delete
> the message and any attached documents
> ---------------------------------------------------------------------
>
>
---------------------------------------------------------------------
For further information on the Renault F1 Team visit our web site at www.renaultf1.com.
Renault F1 Team Limited
Registered in England no. 1806337
Registered Office: 16 Old Bailey London EC4M 7EG
WARNING: please ensure that you have adequate virus protection in place before you open or detach any documents attached to this email.
This e-mail may constitute privileged information. If you are not the intended recipient, you have received this confidential email and any attachments transmitted with it in error and you must not disclose copy, circulate or in any other way use or rely on this information.
E-mails to and from the Renault F1 Team are monitored for operational reasons and in accordance with lawful business practices.
The contents of this email are those of the individual and do not necessarily represent the views of the company.
Please note that this e-mail has been created in the knowledge that Internet e-mail is not a 100% secure communications medium. We advise that you understand and observe this lack of security when e-mailing us.
If you have received this email in error please forward to: is.helpdesk at uk.renaultf1.com quoting the sender, then delete the message and any attached documents
---------------------------------------------------------------------
More information about the ParaView
mailing list