From cais at usc.edu  Sat Oct  5 14:43:29 2019
From: cais at usc.edu (Shanshan Cai)
Date: Sat, 5 Oct 2019 11:43:29 -0700
Subject: [Nirfast] NIRFAST 2019 or 2020 Workshop
Message-ID: <CAKjXRdaoMU2TM80p8YwpwR988RyjqkuwzptzTMhLrrB6f5u8cA@mail.gmail.com>

Hi All,
I am very interested in NIRFAST and I am wondering whether there is a
NIRFAST workship this year or next year. If so, where could I register it?
Thanks for the information.

Best wishes,
Shanshan Cai
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/nirfast/attachments/20191005/8bf33621/attachment.html>

From h.dehghani at cs.bham.ac.uk  Sun Oct  6 15:06:34 2019
From: h.dehghani at cs.bham.ac.uk (Hamid Dehghani)
Date: Sun, 6 Oct 2019 20:06:34 +0100
Subject: [Nirfast] NIRFAST 2019 or 2020 Workshop
In-Reply-To: <CAKjXRdaoMU2TM80p8YwpwR988RyjqkuwzptzTMhLrrB6f5u8cA@mail.gmail.com>
References: <CAKjXRdaoMU2TM80p8YwpwR988RyjqkuwzptzTMhLrrB6f5u8cA@mail.gmail.com>
Message-ID: <65f19159-f9e7-babd-a366-678ed3da0e56@cs.bham.ac.uk>

Hi
We are hoping to rum workshops both at SPIE and OSA: Please keep an eye 
out for the conference website announcement.
Regards
Hamid

On 05/10/2019 19:43, Shanshan Cai wrote:
> Hi All,
> I am very interested in NIRFAST and I?am wondering whether there is a 
> NIRFAST workship this year or next year. If so, where could I register 
> it? Thanks for the information.
> 
> Best wishes,
> Shanshan Cai
> 
> 
> _______________________________________________
> Nirfast mailing list
> Nirfast at public.kitware.com
> https://public.kitware.com/mailman/listinfo/nirfast
> 

-- 
--------------------------
Hamid Dehghani, PhD, MIPEM
Professor of Medical Imaging
School of Computer Science
University of Birmingham
B15 2TT
0121 414 8728
https://www.cs.bham.ac.uk/~dehghanh/mi-lab.html

From cais at usc.edu  Mon Oct  7 16:41:10 2019
From: cais at usc.edu (Shanshan Cai)
Date: Mon, 7 Oct 2019 13:41:10 -0700
Subject: [Nirfast] Questions in tutorial 1 (Imaging a mouse brain tumor )
Message-ID: <CAKjXRdbTn-ao1cR6SvFFiFChi5azJW3K_hQSv+E=Gx+48R+a6g@mail.gmail.com>

Hi All,

I am going through the tutorial 1. The MatLab version I am using is R2017_a
and I download the latest NIRFAST 9.1 MATLAB via Github. I started from the
NIRFAST MATLAB and calibration step(step 10&11). After I finish the setting
and press the button "Done", the Software and the MatLab seem stuck and
nothing is generated in the current folder. I also try to press the button
"Run" in the Main panel. There is no file been created either.  I am
wondering whether I missed something in the tutorial or the waiting
time(~10 min) is still too short for the calibration. Actually, I don't
know if the process is done or not, since there is no sign to show if the
program is still running.
The same thing happens when I test the reconstruction(step 12). Could you
please help me out with this? Thanks for your help.

Best regards,
Shanshan Cai
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/nirfast/attachments/20191007/82fb9479/attachment.html>

From cais at usc.edu  Tue Oct 15 20:49:16 2019
From: cais at usc.edu (Shanshan Cai)
Date: Tue, 15 Oct 2019 17:49:16 -0700
Subject: [Nirfast] Questions in tutorial 1 (Imaging a mouse brain tumor )
In-Reply-To: <CAKjXRdbTn-ao1cR6SvFFiFChi5azJW3K_hQSv+E=Gx+48R+a6g@mail.gmail.com>
References: <CAKjXRdbTn-ao1cR6SvFFiFChi5azJW3K_hQSv+E=Gx+48R+a6g@mail.gmail.com>
Message-ID: <CAKjXRdaDskdyhBwNXoJraRzjEh+2-qvGsBu3R4YEA4+Z2Ckg7w@mail.gmail.com>

Hi All,

Any suggestions?

Thanks,
Shanshan

On Mon, Oct 7, 2019 at 1:41 PM Shanshan Cai <cais at usc.edu> wrote:

> Hi All,
>
> I am going through the tutorial 1. The MatLab version I am using is
> R2017_a and I download the latest NIRFAST 9.1 MATLAB via Github. I started
> from the NIRFAST MATLAB and calibration step(step 10&11). After I finish
> the setting and press the button "Done", the Software and the MatLab seem
> stuck and nothing is generated in the current folder. I also try to press
> the button "Run" in the Main panel. There is no file been created either.
> I am wondering whether I missed something in the tutorial or the waiting
> time(~10 min) is still too short for the calibration. Actually, I don't
> know if the process is done or not, since there is no sign to show if the
> program is still running.
> The same thing happens when I test the reconstruction(step 12). Could you
> please help me out with this? Thanks for your help.
>
> Best regards,
> Shanshan Cai
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/nirfast/attachments/20191015/5d069497/attachment.html>