[Kwiver-users] Software installation guideline for Map-Tk and Sprokit

Ankit Parag Shah aps1 at andrew.cmu.edu
Wed Dec 13 02:52:27 EST 2017 

Hi Roddy,

Still receiving the same warning message. I have installed the cmake with
the option -DKWIVER_ENABLE_EXAMPLES:BOOL=ON enabled.
A directory called examples is created in the build path and yes, running
commands from build path over using src path.

/kwiver/build/release# bin/pipeline_runner -p examples/pipelines/number_
flow.pipe
WARN [2017-12-13 07:30:55 sprokit.register_cluster
/home/ankit/KWIVER-Software-Scripts/kwiver/src/sprokit/
src/processes/clusters/registration.cxx:96] Path not found loading
clusters: /usr/local/share/sprokit/pipelines/clusters
2017-12-13 07:30:55.837 INFO sprokit.modules.modules(68): Loading python
modules
2017-12-13 07:30:55.837 DEBUG sprokit.modules.modules(81): Preparing to
load sprokit python plugin modules: [
    'sprokit.processes',
    'sprokit.schedulers',
    'kwiver.processes'
]
2017-12-13 07:30:55.999 DEBUG sprokit.modules.modules(43): Loading python
module: "<module 'sprokit.schedulers.pythread_per_process_scheduler' from
'/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/
lib/python2.7/dist-packages/sprokit/schedulers/pythread_
per_process_scheduler.pyc'>"
2017-12-13 07:30:55.999 DEBUG sprokit.modules.modules(43): Loading python
module: "<module 'kwiver.processes.ProcessImage' from
'/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/
lib/python2.7/dist-packages/kwiver/processes/ProcessImage.pyc'>"
2017-12-13 07:30:55.999 DEBUG sprokit.modules.modules(43): Loading python
module: "<module 'kwiver.processes.homography_writer' from
'/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/
lib/python2.7/dist-packages/kwiver/processes/homography_writer.pyc'>"
2017-12-13 07:30:55.999 DEBUG sprokit.modules.modules(43): Loading python
module: "<module 'kwiver.processes.kw_print_number_process' from
'/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/
lib/python2.7/dist-packages/kwiver/processes/kw_print_number_process.pyc'>"
2017-12-13 07:30:55.999 DEBUG sprokit.modules.modules(43): Loading python
module: "<module 'kwiver.processes.ApplyDescriptor' from
'/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/
lib/python2.7/dist-packages/kwiver/processes/ApplyDescriptor.pyc'>"

However, the good news is that the output numbers.txt is created. I think
the warning is misleading.

Kind Regards,
Ankit Shah
Masters Student in Language Technologies
Carnegie Mellon University.

On Wed, Dec 13, 2017 at 2:41 AM, Roddy Collins <roddy.collins at kitware.com>
wrote:

> Hmm...
>
> On a guess, try adding -DKWIVER_ENABLE_EXAMPLES:BOOL=ON
>
> ...which I believes configures and installs the the pipeline file based on
> the number_flow.pipe.in template (I don't think that file should be used
> directly.) With examples turned on, you should be able to run
>
> </path/to/kwiver/build>/bin/pipeline_runner -p
> </path/to/kwiver/build>/examples/pipelines/number_flow.pipe
> <http://number_flow.pipe.in>
>
> ...i.e. the examples are installed in the build directory, rather than
> being run from the source directory. (In general we try to keep the build
> and source trees separate.)
>
> -Roddy
>
>
>
>
> On Wed, Dec 13, 2017 at 2:35 AM, Ankit Parag Shah <aps1 at andrew.cmu.edu>
> wrote:
>
>> Hi Roddy,
>>
>> For the kwiver build, I have installed using the following command -
>>
>> cmake ../../src/ -DCMAKE_BUILD_TYPE=Release -Dfletch_DIR:PATH=/home/ankit/
>> KWIVER-Software-Scripts/fletch/build/rel/ -DKWIVER_ENABLE_ARROWS:BOOL=ON
>> -DKWIVER_ENABLE_C_BINDINGS:BOOL=ON -DKWIVER_ENABLE_EXTRAS:BOOL=ON
>> -DKWIVER_ENABLE_LOG4CPLUS:BOOL=ON -DKWIVER_ENABLE_PROCESSES:BOOL=ON
>> -DKWIVER_ENABLE_PYTHON:BOOL=ON -DKWIVER_ENABLE_SPROKIT:BOOL=ON
>> -DKWIVER_ENABLE_TOOLS:BOOL=ON -DKWIVER_USE_BUILD_TREE:BOOL=ON
>>
>> This installation is successful.
>> However, when I am trying to run  -
>>
>> </path/to/kwiver/build>/bin/pipeline_runner -p ../examples/pipelines/
>> number_flow.pipe.in
>>
>> I am receiving the following failure message along with warning for
>> sprokit clusters not found. I checked the sprokit github repository and it
>> seems that clusters are not implemented. Please correct me whether this is
>> correct understanding or not.
>>
>> Message log -
>>
>> WARN [2017-12-13 07:18:07 sprokit.register_cluster
>> /home/ankit/KWIVER-Software-Scripts/kwiver/src/sprokit/src/p
>> rocesses/clusters/registration.cxx:96] Path not found loading clusters:
>> /usr/local/share/sprokit/pipelines/clusters
>> 2017-12-13 07:18:07.095 INFO sprokit.modules.modules(68): Loading python
>> modules
>> 2017-12-13 07:18:07.095 DEBUG sprokit.modules.modules(81): Preparing to
>> load sprokit python plugin modules: [
>>     'sprokit.processes',
>>     'sprokit.schedulers',
>>     'kwiver.processes'
>> ]
>> 2017-12-13 07:18:07.327 DEBUG sprokit.modules.modules(43): Loading python
>> module: "<module 'sprokit.schedulers.pythread_per_process_scheduler'
>> from '/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/li
>> b/python2.7/dist-packages/sprokit/schedulers/pythread_per_pr
>> ocess_scheduler.pyc'>"
>> 2017-12-13 07:18:07.327 DEBUG sprokit.modules.modules(43): Loading python
>> module: "<module 'kwiver.processes.ProcessImage' from
>> '/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/li
>> b/python2.7/dist-packages/kwiver/processes/ProcessImage.pyc'>"
>> 2017-12-13 07:18:07.327 DEBUG sprokit.modules.modules(43): Loading python
>> module: "<module 'kwiver.processes.homography_writer' from
>> '/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/li
>> b/python2.7/dist-packages/kwiver/processes/homography_writer.pyc'>"
>> 2017-12-13 07:18:07.327 DEBUG sprokit.modules.modules(43): Loading python
>> module: "<module 'kwiver.processes.kw_print_number_process' from
>> '/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/li
>> b/python2.7/dist-packages/kwiver/processes/kw_print_number_process.pyc'>"
>> 2017-12-13 07:18:07.328 DEBUG sprokit.modules.modules(43): Loading python
>> module: "<module 'kwiver.processes.ApplyDescriptor' from
>> '/home/ankit/KWIVER-Software-Scripts/kwiver/build/release/li
>> b/python2.7/dist-packages/kwiver/processes/ApplyDescriptor.pyc'>"
>> Exception caught: The process 'numbersink' has a configuration issue:
>> Failed to open the path: @EXAMPLE_DIR@/pipelines/output/numbers.txt
>>
>> Kind Regards,
>> Ankit Shah
>>
>>
>> On Wed, Dec 13, 2017 at 2:26 AM, Roddy Collins <roddy.collins at kitware.com
>> > wrote:
>>
>>> > command run is cmake . from the source directory where I have
>>> performed a git clone of sprokit repository
>>>
>>> Try making a build directory next to the source directory and run cmake
>>> from there, pointing at the source directory.
>>>
>>> $ mkdir /home/ankit/kwiver-build
>>> $ cd /home/ankit/kwiver-build
>>> $ ccmake ../KWIVER-Software-Scripts
>>>
>>> (assuming KWIVER-Software-Scripts is where you've cloned kwiver into.)
>>>
>>> ...note the use of ccmake, so that you can set options (such as turning
>>> sprokit on or off.)
>>>
>>> -Roddy
>>>
>>>
>>> On Wed, Dec 13, 2017 at 2:16 AM, Ankit Parag Shah <aps1 at andrew.cmu.edu>
>>> wrote:
>>>
>>>> Hi Roddy,
>>>>
>>>> For the above post, I am having a problem building the software for
>>>> sprokit and map-tk and running examples.
>>>> Currently, I am using the latest branch of kwiver and fletch.
>>>>
>>>> Git hash for fletch is 65a12ea5b5f5cfd21ce43468ba8fb65360363c05
>>>> Git hash for kwiver is d1f1c38c462a4be3b0cdc58d6163af0e33169ca5
>>>>
>>>> Build of kwiver and fletch was successful where I have followed the
>>>> guidelines as per respective repository's documentation and have suggested
>>>> modification to Readme documentation via pull request.
>>>> I am using Ubuntu 16.04 based environment.
>>>>
>>>> Following is the output of gcc -v
>>>> gcc -v
>>>> Using built-in specs.
>>>> COLLECT_GCC=gcc
>>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>>> Target: x86_64-linux-gnu
>>>> Configured with: ../src/configure -v --with-pkgversion='Ubuntu
>>>> 5.4.0-6ubuntu1~16.04.5' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>>> --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id
>>>> --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
>>>> --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu
>>>> --enable-libstdcxx-debug --enable-libstdcxx-time=yes
>>>> --with-default-libstdcxx-abi=new --enable-gnu-unique-object
>>>> --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib
>>>> --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo
>>>> --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre
>>>> --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64
>>>> --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>>> --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar
>>>> --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686
>>>> --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib
>>>> --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu
>>>> --host=x86_64-linux-gnu --target=x86_64-linux-gnu
>>>> Thread model: posix
>>>> gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)
>>>>
>>>> Output screenshot - command run is cmake . from the source directory
>>>> where I have performed a git clone of sprokit repository.
>>>>
>>>>    used as include directory in directory /home/ankit/KWIVER-Software-Sc
>>>> ripts/sprokit/source/conf
>>>>    used as include directory in directory /home/ankit/KWIVER-Software-Sc
>>>> ripts/sprokit/source/conf
>>>>    used as include directory in directory /home/ankit/KWIVER-Software-Sc
>>>> ripts/sprokit/source/conf
>>>>    used as include directory in directory /home/ankit/KWIVER-Software-Sc
>>>> ripts/sprokit/source/conf
>>>>    used as include directory in directory /home/ankit/KWIVER-Software-Sc
>>>> ripts/sprokit/source/conf
>>>>
>>>> -- Configuring incomplete, errors occurred!
>>>> See also "/home/ankit/KWIVER-Software-Scripts/sprokit/source/CMakeFil
>>>> es/CMakeOutput.log".
>>>> See also "/home/ankit/KWIVER-Software-Scripts/sprokit/source/CMakeFil
>>>> es/CMakeError.log"
>>>>
>>>> Thank you for your quick response.
>>>>
>>>>
>>>> Kind Regards,
>>>> Ankit Shah
>>>> Masters Student in Language Technologies
>>>> Carnegie Mellon University.
>>>>
>>>> On Wed, Dec 13, 2017 at 1:55 AM, Roddy Collins <
>>>> roddy.collins at kitware.com> wrote:
>>>>
>>>>> Hi Ankit--
>>>>>
>>>>> Can you be more specific in the difficulties you're having? (Problems
>>>>> building the software, problems running the examples, etc.)
>>>>>
>>>>> Please be sure to include:
>>>>>
>>>>> - the operating system and compiler you're using
>>>>> - which branches of kwiver and fletch you're building
>>>>> - if possible, console output showing the problem (as an attachment)
>>>>>
>>>>> Thanks
>>>>> -Roddy
>>>>>
>>>>>
>>>>> On Wed, Dec 13, 2017 at 1:36 AM, Ankit Parag Shah <aps1 at andrew.cmu.edu
>>>>> > wrote:
>>>>>
>>>>>> Hi all,
>>>>>>
>>>>>> In order to install software Map-Tk and sprokit, is there a software
>>>>>> installation tutorial/documentation available which is not present on the
>>>>>> internet.
>>>>>>
>>>>>> I am finding difficulty in installing both these software necessary
>>>>>> for working with Kwiver toolkit.
>>>>>>
>>>>>> Looking forward to your response.
>>>>>>
>>>>>> Kind Regards,
>>>>>> Ankit Shah
>>>>>> Masters Student in Language Technologies
>>>>>> Carnegie Mellon University.
>>>>>>
>>>>>> _______________________________________________
>>>>>> Kwiver-users mailing list
>>>>>> Kwiver-users at public.kitware.com
>>>>>> http://public.kitware.com/mailman/listinfo/kwiver-users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/kwiver-users/attachments/20171213/fe6e7c62/attachment-0001.html>

More information about the Kwiver-users mailing list