[Insight-users] ITKFlipImageFilter does not reset origin to (0,0)
Emma Ryan
eryanvtk at yahoo.com
Wed Nov 24 20:54:58 EST 2010
Hello all,
I'm trying to crop and then flip an image about the Y-axis. I use the
RegionOfInterestFilter and the FlipImageFilter.
I'm having trouble understanding the process. I have found one previous posts
but the explanation is not clear.
1. Do itk filters work with a copy of the image or the image itself ?
I thought they worked with a copy of the image, since
filter->ReleaseDataFlagOn() would release the original image space.
Filter->GetOutput() then will return the copy.
2. for a 500 * 1000 image, after Cropping to 500 * 600 (i.e crop along Y-axis
from 200 - 800) and Flip, the GetOrigin() returns (0, -800). Sure I can map the
indices. But why do I have to ?
if new_image = filp->GetOutput(), and size of new_image is 500 * 600. Then why
is this mapping necessary ? How can I avoid it ?
3. should the flip->ReleaseDataFlagOn(); be used or not ? What will it do ?
Irrespective of whether I leave it on of off, I seem to be losing the reference
to original image.
Any suggestions are welcome. I have attached the appropriate code segment.
Thank you,
Emma
ImageType::SizeType roi_size = image->GetLargestPossibleRegion().GetSize();
itk::Point<float, 2> roi_origin = image->GetOrigin();
ImageType::IndexType roi_index;
roi_index[0] = roi_origin[0];
roi_index[1] = roi_origin[1] + 200;
roi_size[1] = 600;
ImageType::RegionType roi_region;
roi_region.SetIndex(roi_index);
roi_region.SetSize(roi_size);
typedef itk::RegionOfInterestImageFilter<ImageType, ImageType> ROIType;
ROIType::Pointer p_roi_filter = ROIType::New();
p_roi_filter->SetRegionOfInterest(roi_region);
p_roi_filter->SetInput(image);
p_roi_filter->Update();
flip->SetInput(p_roi_filter->GetOutput());
//flip->ReleaseDataFlagOn();
flipAxesSet=flip->GetFlipAxes();
flipAxesSet[1]=true;
flip->SetFlipAxes(flipAxesSet);
flip->Update();
ImageType::Pointer new_image = flip->GetOutput();
________________________________
From: "insight-users-request at itk.org" <insight-users-request at itk.org>
To: insight-users at itk.org
Sent: Wed, November 24, 2010 9:00:17 AM
Subject: Insight-users Digest, Vol 79, Issue 28
Send Insight-users mailing list submissions to
insight-users at itk.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.itk.org/mailman/listinfo/insight-users
or, via email, send a message with subject or body 'help' to
insight-users-request at itk.org
You can reach the person managing the list at
insight-users-owner at itk.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Insight-users digest..."
Today's Topics:
1. Re: [vtkusers] Interactive seed point selection based on QVTK
Widget (urgent request for help!) (Prathamesh Kulkarni)
2. Re: 2d 3d registration with multiple 2d images (brian avants)
3. reset m_CurrentIteration in itkLBFGSBOptimizer (Mengda Wu)
4. Re: ManagedITK compilation problem [was MIDAS Journal
Feedback] (Dan Mueller)
5. Re: Constructing a 3D volume from 2D cross section (D?enan Zuki?)
6. Re: [vtkusers] Interactive seed point selection based on QVTK
Widget (urgent request for help!) (Xiaopeng Yang)
7. Re: [vtkusers] Interactive seed point selection based on QVTK
Widget (urgent request for help!) (David Doria)
8. Re: 2d 3d registration with multiple 2d images (Karthik Krishnan)
9. Simplify a set of points in ITK (Marta Peroni)
10. Manual de Configuraci?n ITK, VTK & Borland C++ Builder (en
espa?ol ) (olguna at cimat.mx)
----------------------------------------------------------------------
Message: 1
Date: Tue, 23 Nov 2010 11:16:31 -0600
From: Prathamesh Kulkarni <prathameshmkulkarni at gmail.com>
Subject: Re: [Insight-users] [vtkusers] Interactive seed point
selection based on QVTK Widget (urgent request for help!)
To: yxp233 at postech.ac.kr
Cc: insight-users at itk.org, VTK Mailing List <vtkusers at vtk.org>
Message-ID:
<AANLkTinpCjCxwq7G5Nf3A8t45jYFqJsoXNQstarCxAuw at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hello,
I think the vtkSeedWidget fits well for marking seed points. Have a look at
http://www.vtk.org/Wiki/VTK/Examples/Cxx/Widgets/vtkSeedWidget for example
usage.
I have used this inside the QVTKWidget as well.
- Prathamesh
Message: 4
Date: Tue, 23 Nov 2010 06:02:54 -0500
From: David Doria <daviddoria at gmail.com>
Subject: Re: [Insight-users] [vtkusers] Interactive seed point
selection based on QVTK Widget (urgent request for help!)
To: Xiaopeng Yang <yxp233 at postech.ac.kr>
Cc: itk <Insight-users at itk.org>, vtkusers at vtk.org
Message-ID:
<AANLkTimuFS5y157YtpzSWfVerZb8zZ9nsQbM4OLa1Jf1 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Tue, Nov 23, 2010 at 1:35 AM, Xiaopeng Yang <yxp233 at postech.ac.kr> wrote:
> Hello everyone,
>
>
>
> Greetings!
>
>
>
> In my program for medical image segmentation, QVTK widget ImageViewer2 is
> used to visualize the images. Do you know what specific functions in VTK
or
> ITK I can use to select and load seed point index to my code by simply
> clicking a point?
>
>
>
> I know that if imageplane widget is used, then by clicking a point, the
seed
> point index and pixel value can be shown in the screen. But I do not know
> how to save those values to the code automatically at the same time as
> clicking that point. Meanwhile, I am not sure it is feasible or not to use
> imageplane widget in QVTK widget.
>
>
>
> Since the deadline for my program is approaching, any help will be greatly
> appreciated!
>
>
>
> Thank you,
>
> Xiaopeng
You may want to look at vtkImageTracerWidget:
http://www.vtk.org/doc/nightly/html/classvtkImageTracerWidget.html
Here is an example example usage:
http://www.vtk.org/Wiki/VTK/Examples/Cxx/Widgets/ImageTracerWidget
To get the points you handle one of the events (EndInteractionEvent
probably) and then use the GetPath function.
Also, there should be no problem using VTK widgets in a QVTK widget.
Here is an example:
http://www.vtk.org/Wiki/VTK/Examples/Cxx/Qt/BorderWidget
Good luck,
David
------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.itk.org/pipermail/insight-users/attachments/20101123/ab042e86/attachment-0001.htm>
------------------------------
Message: 2
Date: Tue, 23 Nov 2010 13:41:04 -0500
From: brian avants <stnava at gmail.com>
Subject: Re: [Insight-users] 2d 3d registration with multiple 2d
images
To: "Bertelsen, Alvaro" <abertelsen at ceit.es>
Cc: "insight-users at itk.org" <insight-users at itk.org>
Message-ID:
<AANLkTin7tvWEkoRZf8LQTbaKYOGsFDcF8jLpy-m1=6y8 at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
This is an interesting question. Registration refactoring will
address this by formulating the problem as a multi-valued
optimization. Is it the case that the 2d images are "in the same
space" i.e. already in some physical correspondence to each other?
If so, then the algorithm would be something like:
- Declare "registration machines" for each of the 2D-3D problems.
- Registration machines contain the image pairs, optimizers, metrics
for each problem.
- Pass the machine set to a multi-resolution , multi-valued
registration coordinator.
- The coordinator will determine how to combine the output of each machine.
Would this type of approach work for you?
On Mon, Nov 22, 2010 at 12:05 PM, Bertelsen, Alvaro <abertelsen at ceit.es> wrote:
> Dear ITK users,
>
>
>
> I am working on the development of an image-guided surgery application, for
> which I need a library for registration of a 3d image to multiple
> projections. I know about the classes already included in ITK ?such as
> RayCastInterpolateImageFunction- and the extended library developed by
> Steininger et al.
>(http://ibia.umit.at/ResearchGroup/Phil/web/Simple2D3DRegistrationFramework.html).
>.
> However, these do not fit our needs as they are limited to a single 2d image
> and we are interested in handling an arbitrary number of them.
>
>
>
> I have searched in the mailing list and found some other people asking the
> same question, the last one on April 2006 (unless I have missed a more
> recent one). So, does anyone know about an ITK extension for what I need?
> Or, is there a way (which I am not aware of) to make ITK handle multiple
> fixed (2d) images?
>
>
>
> Any help you could provide me will be greatly appreciated.
>
> Yours sincerely,
>
>
>
> ?lvaro Bertelsen
>
> CEIT, University of Navarra, Spain
>
>
>
> _____________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Kitware offers ITK Training Courses, for more information visit:
> http://www.kitware.com/products/protraining.html
>
> Please keep messages on-topic and check the ITK FAQ at:
> http://www.itk.org/Wiki/ITK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.itk.org/mailman/listinfo/insight-users
>
>
--
?????
------------------------------
Message: 3
Date: Tue, 23 Nov 2010 17:26:39 -0800
From: Mengda Wu <wumengda at gmail.com>
Subject: [Insight-users] reset m_CurrentIteration in
itkLBFGSBOptimizer
To: Insight-users at itk.org
Message-ID:
<AANLkTinKa2PYR4mbsg66nNXjej1mUX75A49MzRY1ZZ8b at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi all,
I found a small bug which can be annoying in some cases. If the same
LBFGSBOptimizer is used for BSpline-based deformable registration twice
(e.g. first in coarser grid and then in finer grid),
the initial output of the second registration will give the final iteration
number of the first registration.
I am wondering if there is a way to reset m_CurrentIteration in
itkLBFGSBOptimizer. Also, the variable m_InfinityNormOfProjectedGradient has
the same issue.
Thanks,
Mengda
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.itk.org/pipermail/insight-users/attachments/20101123/b9ebfe04/attachment-0001.htm>
------------------------------
Message: 4
Date: Wed, 24 Nov 2010 11:19:35 +0100
From: Dan Mueller <dan.muel at gmail.com>
Subject: Re: [Insight-users] ManagedITK compilation problem [was MIDAS
Journal Feedback]
To: bergy at ukr.net
Cc: Insight Users <insight-users at itk.org>, Julien Jomier
<julien.jomier at kitware.com>
Message-ID:
<AANLkTinD8zV-pkJKSRCNQz5tMygch_Neff1cs5epUuFm at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hi bergy,
I will try to help with your ManagedITK compilation problem, but you
will need to provide some more information.
A. What version of ManagedITK are you using?
You should use this version:
http://manageditk.googlecode.com/files/ManagedITK-src-3.20.0.0.zip
B. What version of ITK are you using?
You should use this version:
http://voxel.dl.sourceforge.net/sourceforge/itk/InsightToolkit-3.20.0.zip
C. What steps did you follow for compilation?
You should follow the steps list in section 3.2 here:
http://manageditk.googlecode.com/files/ManagedITK-article.pdf
>From the error messages you reported, it could be that you missed step 6:
===================
6. Convert to Managed Projects: Before opening the projects, run the
FinishCMake.bat file located
in the build folder. Because CMake does not support managed projects,
this batch file
is required to convert the generated vcproj files into managed projects.
===================
Did you run FinishCMake.bat?
Aside: In the future, please use the Insight users
(insight-users at itk.org) mailing list for ITK/ManagedITK questions, see
here: http://www.itk.org/mailman/listinfo/insight-users
Aside: I have stopped development on ManagedITK. The next version of
ITK (version 4) will include internal support for C# wrapping. This
will be ready early- to mid-2011.
Please let me know the answer to these questions.
Regards, Dan
dan.muel at gmail.com
On 23 November 2010 20:41, Julien Jomier <julien.jomier at kitware.com> wrote:
> Dan,
>
> Could you answer this question?
>
> Thanks,
> Julien
>
> -------- Original Message --------
> Subject: MIDAS Journal Feedback
> Date: Tue, 23 Nov 2010 06:35:31 -0500
> From: webmaster at insightsoftwareconsortium.org
> To: webmaster at insightsoftwareconsortium.org
>
>
> MIDAS Journal Feedback from bergy at ukr.net
>
> Where:
> What happened: I'm working with Visual Studio 2010 under Windows 7 x64. I'm
> trying to use ManagedITK in my magister scince work. Because I'm using C#
> (more faster developing than C++), I chose ManagedITK.
> I've downloaded, configured and builded ITK. The next step is to build
> ManagedITK. And I just can not cope with two errors during building
> ManagedITK:
> 1. There wasn't /clr command line flag. When I added it another error
> comming out:
> ?Command line error D8016: '/clr' and '/EHs' command-line options are
> incompatible
>
> 2. a lot of errors:
> fatal error C1192: #using failed on
>'E:\Work\Magister\ManagedITK\ManagedITKBin-3.6.0.2\bin\Debug\ManagedITK.Common.dll
>l
>
> and
>
> fatal error C1083: Cannot open source file:
> 'E:/Work/Magister/ManagedITK/ManagedITKBin-3.6.0.2/bin/Debug': Permission
> denied
>
> I can not understand why there is some "Permission denied" on that folder. I
> tried to run VS 2010 as an administrator and it didn't help.
>
> System: Mozilla/5.0 (Windows; U; Windows NT 6.1; uk; rv:1.9.2.12)
> Gecko/20101026 Firefox/3.6.12
------------------------------
Message: 5
Date: Wed, 24 Nov 2010 14:01:22 +0100
From: D?enan Zuki? <dzenanz at gmail.com>
Subject: Re: [Insight-users] Constructing a 3D volume from 2D cross
section
To: Zein Salah <zeinsalah at gmail.com>
Cc: insight-users at itk.org
Message-ID:
<AANLkTim7HdNfF-Q6+jmaU=k6azYmEDdMjy6M9jtf_e9G at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Hi,
perhaps you can convert those slices into DICOM images (if they are in
that format already just put them all in one series, somehow), and
then pass them as one series to ITK's DICOM image reader.
HTH,
D?enan
On Wed, Nov 3, 2010 at 19:56, Zein Salah <zeinsalah at gmail.com> wrote:
> Hello everybody,
>
> I have a set of 2D cross sections, originating from an ultrasound
> scanner, together
> with their position and rotation data. The sections are non parallel.
> I am wondering
> weather there is a mechanism in ITK to reconstrcut a 3D image from these
>slices.
>
> Thanks in advance,
>
> Zein
> _____________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Kitware offers ITK Training Courses, for more information visit:
> http://www.kitware.com/products/protraining.html
>
> Please keep messages on-topic and check the ITK FAQ at:
> http://www.itk.org/Wiki/ITK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.itk.org/mailman/listinfo/insight-users
>
------------------------------
Message: 6
Date: Wed, 24 Nov 2010 22:49:50 +0900
From: "Xiaopeng Yang" <yxp233 at postech.ac.kr>
Subject: Re: [Insight-users] [vtkusers] Interactive seed point
selection based on QVTK Widget (urgent request for help!)
To: "'David Doria'" <daviddoria at gmail.com>
Cc: 'itk' <Insight-users at itk.org>, vtkusers at vtk.org
Message-ID: <016101cb8bde$773d0780$65b71680$@ac.kr>
Content-Type: text/plain; charset="utf-8"
Thank you for your help. But are you sure the vtkimagetracerwidget is what I
need for seed point selection?
Xiaopeng
-----????-----
???: David Doria [mailto:daviddoria at gmail.com]
????: 2010? 11? 23? ??? ?? 8:03
???: Xiaopeng Yang
??: itk; vtkusers at vtk.org
??: Re: [vtkusers] Interactive seed point selection based on QVTK Widget (urgent
request for help!)
On Tue, Nov 23, 2010 at 1:35 AM, Xiaopeng Yang <yxp233 at postech.ac.kr> wrote:
> Hello everyone,
>
>
>
> Greetings!
>
>
>
> In my program for medical image segmentation, QVTK widget ImageViewer2 is
> used to visualize the images. Do you know what specific functions in VTK or
> ITK I can use to select and load seed point index to my code by simply
> clicking a point?
>
>
>
> I know that if imageplane widget is used, then by clicking a point, the seed
> point index and pixel value can be shown in the screen. But I do not know
> how to save those values to the code automatically at the same time as
> clicking that point. Meanwhile, I am not sure it is feasible or not to use
> imageplane widget in QVTK widget.
>
>
>
> Since the deadline for my program is approaching, any help will be greatly
> appreciated!
>
>
>
> Thank you,
>
> Xiaopeng
You may want to look at vtkImageTracerWidget:
http://www.vtk.org/doc/nightly/html/classvtkImageTracerWidget.html
Here is an example example usage:
http://www.vtk.org/Wiki/VTK/Examples/Cxx/Widgets/ImageTracerWidget
To get the points you handle one of the events (EndInteractionEvent
probably) and then use the GetPath function.
Also, there should be no problem using VTK widgets in a QVTK widget.
Here is an example:
http://www.vtk.org/Wiki/VTK/Examples/Cxx/Qt/BorderWidget
Good luck,
David
------------------------------
Message: 7
Date: Wed, 24 Nov 2010 08:51:18 -0500
From: David Doria <daviddoria at gmail.com>
Subject: Re: [Insight-users] [vtkusers] Interactive seed point
selection based on QVTK Widget (urgent request for help!)
To: Xiaopeng Yang <yxp233 at postech.ac.kr>
Cc: itk <Insight-users at itk.org>, vtkusers at vtk.org
Message-ID:
<AANLkTinNjJd2yonodyjhA4FxnPB1saeOwS4W-NqtLUeC at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Wed, Nov 24, 2010 at 8:49 AM, Xiaopeng Yang <yxp233 at postech.ac.kr> wrote:
> Thank you for your help. But are you sure the vtkimagetracerwidget is what I
>need for seed point selection?
>
> Xiaopeng
As Prathamesh mentioned, you might also consider vtkSeedWidget.
David
------------------------------
Message: 8
Date: Wed, 24 Nov 2010 20:33:23 +0530
From: Karthik Krishnan <karthik.krishnan at kitware.com>
Subject: Re: [Insight-users] 2d 3d registration with multiple 2d
images
To: brian avants <stnava at gmail.com>
Cc: "insight-users at itk.org" <insight-users at itk.org>
Message-ID:
<AANLkTinLdaUmR2yBgHFMkc3Pme00m2++nyE62bggHdM0 at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Groupwise registration has similar needs. ie. An API in the metric /
cost function superclass to take in an array of images.
Perhaps it calls for a another hierarchy deriving from
SingleValuedCostFunction (for groupwise registration) driven by
variants of the ImageRegistrationMethod
Thanks
--
karthik
On Wed, Nov 24, 2010 at 12:11 AM, brian avants <stnava at gmail.com> wrote:
> This is an interesting question. ? Registration refactoring will
> address this by formulating the problem as a multi-valued
> optimization. ? Is it the case that the 2d images are "in the same
> space" ?i.e. already in some physical correspondence to each other?
> If so, then the algorithm would be something like:
>
> - Declare "registration machines" for each of the 2D-3D problems.
> - Registration machines contain the image pairs, optimizers, metrics
> for each problem.
> - Pass the machine set to a multi-resolution , multi-valued
> registration coordinator.
> - The coordinator will determine how to combine the output of each machine.
>
> Would this type of approach work for ?you?
>
> On Mon, Nov 22, 2010 at 12:05 PM, Bertelsen, Alvaro <abertelsen at ceit.es>
wrote:
>> Dear ITK users,
>>
>>
>>
>> I am working on the development of an image-guided surgery application, for
>> which I need a library for registration of a 3d image to multiple
>> projections. I know about the classes already included in ITK ?such as
>> RayCastInterpolateImageFunction- and the extended library developed by
>> Steininger et al.
>>(http://ibia.umit.at/ResearchGroup/Phil/web/Simple2D3DRegistrationFramework.html).
>>.
>> However, these do not fit our needs as they are limited to a single 2d image
>> and we are interested in handling an arbitrary number of them.
>>
>>
>>
>> I have searched in the mailing list and found some other people asking the
>> same question, the last one on April 2006 (unless I have missed a more
>> recent one). So, does anyone know about an ITK extension for what I need?
>> Or, is there a way (which I am not aware of) to make ITK handle multiple
>> fixed (2d) images?
>>
>>
>>
>> Any help you could provide me will be greatly appreciated.
>>
>> Yours sincerely,
>>
>>
>>
>> ?lvaro Bertelsen
>>
>> CEIT, University of Navarra, Spain
>>
>>
>>
>> _____________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Kitware offers ITK Training Courses, for more information visit:
>> http://www.kitware.com/products/protraining.html
>>
>> Please keep messages on-topic and check the ITK FAQ at:
>> http://www.itk.org/Wiki/ITK_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.itk.org/mailman/listinfo/insight-users
>>
>>
>
>
>
> --
> ?????
> _____________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Kitware offers ITK Training Courses, for more information visit:
> http://www.kitware.com/products/protraining.html
>
> Please keep messages on-topic and check the ITK FAQ at:
> http://www.itk.org/Wiki/ITK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.itk.org/mailman/listinfo/insight-users
>
------------------------------
Message: 9
Date: Wed, 24 Nov 2010 17:17:48 +0100
From: Marta Peroni <m.peroni at gmail.com>
Subject: [Insight-users] Simplify a set of points in ITK
To: ITK Users <insight-users at itk.org>
Cc: Luis Ibanez <luis.ibanez at kitware.com>
Message-ID:
<AANLkTimNPYev6x2FCw=NKyZ8AiPZR=0_vqbFOF7r6Q-N at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi!
I have a kind of "dummy" problem. I do need to select a subset of point
cloud describing the contour of a structure (the points are previously
derived with the ITK Review implementation of Marching Squares and therefore
I do have *lots* of points).
I found a very nice implementation of this in CGAL Random_Simplify_Points,
but unfortunately I cannot include the whole library in my project.
So here it comes the question:
I did store my points (x,y,z) in a PointsContainer (as in PointSet2.cxx).
Now in order for the algorithm to work, I need to randomly shuffle /
randomly extract from the container (shuffle would be the best option).
Is there something similar to itk::ImageRandomNonRepeatingIteratorWithIndex
but for points containers?and/or a shuffle method?
thanks a lot
Marta
--
*******************************************************************
Marta Peroni
PhD Student - Bioengineering department - Politecnico di Milano (IT)
contacts:
mail: marta.peroni at mail.polimi.it , m.peroni at gmail.com
mobile: +393488202136 (IT) +16178186365 (US)
office: +39 02 2399 9022
********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.itk.org/pipermail/insight-users/attachments/20101124/a0021bea/attachment-0001.htm>
------------------------------
Message: 10
Date: Wed, 24 Nov 2010 10:25:45 -0600
From: olguna at cimat.mx
Subject: [Insight-users] Manual de Configuraci?n ITK, VTK & Borland
C++ Builder (en espa?ol )
To: insight-users at itk.org, vtkusers at vtk.org
Message-ID:
<5d7e2c715bad80e8ac4852a0e710bcea.squirrel at correo.cimat.mx>
Content-Type: text/plain;charset=iso-8859-1
Message written in Spanish with the intention to communicate with Spanish
speakers, without attempting to exclude anyone.
Saludos Usuarios de ITK & VTK y quienes aun trabajen en Borland C++
Builder 5.3 (desde 2008 C++ Builder pertenece a Embarcadero), hago de su
conocimiento y pongo a su disposici?n un manual de instalaci?n/compilaci?n
de BCB, ITK & VTK, en espa?ol, lo pueden encontrar en
http://effort-2-improve.wikispaces.com/BCBITKVTK, a manera de
agradecimiento por la disponibilidad de estas librer?as y de la buena
asesor?a recibida cuando realizaba mis primeros pasos en dicha plataforma.
Espero les sea de utilidad, ATTE:
L. en M. Oscar Guti?rrez Luna
Greetings Members of ITK & VTK and who are still working in Borland C + +
Builder 5.3 (since 2008 C + + Builder belongs to Embarcadero), I put at
its disposal a manual installation / compilation of BCB, ITK & VTK (only
in Spanish), can be found on
http://effort-2-improve.wikispaces.com/BCBITKVTK, as an appreciation for
the availability of these libraries and good advice received while
conducting my first steps on that platform.
I hope this will be useful
L. in M. Oscar Guti?rrez Luna
"One can't learn anything so well as by experiencing it oneself"
Albert Einstein
"...la sabiduria no se transmite. La ciencia que el sabio intenta
comunicar suena siempre a locura." Hermann Hesse. SIDDHARTHA
------------------------------
_______________________________________________
Insight-users mailing list
Insight-users at itk.org
http://www.itk.org/mailman/listinfo/insight-users
End of Insight-users Digest, Vol 79, Issue 28
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.itk.org/pipermail/insight-users/attachments/20101124/5e765af5/attachment-0001.htm>
More information about the Insight-users
mailing list