[Insight-users] [Insight-developers] CMake config problem: ITK + GDCM 2 + VTK

Sat Jul 17 12:31:54 EDT 2010

Thanks for your attention.

Stephen, no, WrapITK isn't enabled in my configuration.

Karthik, yes, GDCM has been built with the flag GDCM-USE-VTK set to ON.

I checked the following in my installed GDCM and VTK directories (include
and lib dirs):

$ grep -R VTK_VERSION include/vtk-5.6/ lib/vtk-5.6/ include/gdcm-2.0/
lib/gdcm-2.0/
include/vtk-5.6/vtkConfigure.h:#define VTK_VERSION "5.6.0"
include/vtk-5.6/vtkVersion.h:# define VTK_SOURCE_VERSION "vtk version "
VTK_VERSION ", Date: " vtksys_DATE_STAMP_STRING
include/vtk-5.6/vtkVersion.h:# define VTK_SOURCE_VERSION "vtk version "
VTK_VERSION
include/vtk-5.6/vtkVersion.h:  static const char *GetVTKVersion() { return
VTK_VERSION; }

Thanks,

Roger

On Sat, Jul 17, 2010 at 6:26 PM, Karthik Krishnan <
karthik.krishnan at kitware.com> wrote:

> I think the more likely place VTK-VERSION may be getting pulled in is
> that GDCM has been built with the flag GDCM-USE-VTK set to ON. Dean
> Inglis who initially reported the error on the attached link did have
> this flag on.
>
> On 7/17/10, Stephen Aylward <stephen.aylward at kitware.com> wrote:
> > The problem is that VTK_VERSION is being set somewhere that it shouldn't
> >
> > Bill H thinks VTK_VERSION might be set in GDCM.   Check the Cache/Use
> > file on your local install.
> >
> > I checked the following in ITK:
> >
> > $ grep -R VTK_VERSION *
> > Utilities/MetaIO/CMakeLists.txt:IF(VTK_VERSION)
> > Utilities/MetaIO/CMakeLists.txt:ELSE(VTK_VERSION)
> > Utilities/MetaIO/CMakeLists.txt:ENDIF(VTK_VERSION)
> > Wrapping/WrapITK/ExternalProjects/ItkVtkGlue/Wrapping/CMakeLists.txt:
> > SET(VTK_VERSION
> > "${VTK_MAJOR_VERSION}.${VTK_MINOR_VERSION}.${VTK_BUILD_VERSION}")
> > Wrapping/WrapITK/ExternalProjects/ItkVtkGlue/Wrapping/CMakeLists.txt:
> > IF("${VTK_VERSION}" STRLESS "${MIN_ITK_VER}")
> > Wrapping/WrapITK/ExternalProjects/ItkVtkGlue/Wrapping/CMakeLists.txt:
> > ELSE("${VTK_VERSION}" STRLESS "${MIN_ITK_VER}")
> > Wrapping/WrapITK/ExternalProjects/ItkVtkGlue/Wrapping/CMakeLists.txt:
> > ENDIF("${VTK_VERSION}" STRLESS "${MIN_ITK_VER}")
> >
> > So, if WrapITK is being used, then a temp var called VTK_VERSION is
> > being created...which is kind of a "reserved" CMake variable and could
> > cause the error.  Is wrapping enabled?
> >
> > s
> >
> > On Sat, Jul 17, 2010 at 10:35 AM, Bill Lorensen <bill.lorensen at gmail.com
> >
> > wrote:
> >> Hmmm... that happened to me too.
> >>
> >> Why haven't we fixed this?
> >>
> >> Bill
> >>
> >> On Sat, Jul 17, 2010 at 8:47 AM, Karthik Krishnan
> >> <karthik.krishnan at kitware.com> wrote:
> >>> Known issue.. See this
> >>>
> >>>   http://www.itk.org/pipermail/insight-users/2010-June/037360.html
> >>>
> >>> and
> >>>
> >>>   http://www.itk.org/pipermail/insight-users/2010-July/037404.html
> >>>
> >>> I think the consensus is to downgrade to CMake 2.6 from Cmake 2.8
> >>>
> >>>
> >>> On Sat, Jul 17, 2010 at 3:25 PM, Roger Bramon Feixas
> >>> <rogerbramon at gmail.com>
> >>> wrote:
> >>>>
> >>>> Hi,
> >>>> I have the same problem reported in this
> >>>> thread:
> http://www.itk.org/pipermail/insight-users/2010-March/035903.html,
> >>>> but any solution was published. I would like to continue the
> discussion.
> >>>> I'm trying to compile ITK 3.18 with GDCM 2.0.15. I compiled correctly
> >>>> GDCM
> >>>> 2.0.15 with VTK 5.6 but when I set to 1 the ITK_USE_SYSTEM_GDCM option
> >>>> this
> >>>> CMake message error appears:
> >>>> CMake Error at Utilities/MetaIO/CMakeLists.txt:104 (INSTALL):
> >>>>   install TARGETS given no LIBRARY DESTINATION for shared library
> target
> >>>>   "vtkmetaio".
> >>>>
> >>>> In the mentioned thread, Brad King proposed a test:
> >>>> "
> >>>> Edit ITK/Utilities/MetaIO/CMakeLists.txt to add some message()-s
> >>>> in this top block:
> >>>> IF(VTK_VERSION)
> >>>>   SET(METAIO_FOR_VTK 1)
> >>>>   MARK_AS_ADVANCED( METAIO_FOR_VTK )
> >>>>   SET(METAIO_NAMESPACE "vtkmetaio")
> >>>>   MESSAGE(FATAL_ERRORO "ITK IS NOT VTK!")  # ADD THIS LINE
> >>>> ELSE(VTK_VERSION)
> >>>> ...
> >>>> ENDIF(VTK_VERSION)
> >>>> Does CMake hit this?  Are you pointing ITK at a VTK? "
> >>>> I tested it, and yes, CMake hits this.
> >>>> Anyone have any suggestion?
> >>>> Thanks,
> >>>> Roger
> >>>> _____________________________________
> >>>> Powered by www.kitware.com
> >>>>
> >>>> Visit other Kitware open-source projects at
> >>>> http://www.kitware.com/opensource/opensource.html
> >>>>
> >>>> Kitware offers ITK Training Courses, for more information visit:
> >>>> http://www.kitware.com/products/protraining.html
> >>>>
> >>>> Please keep messages on-topic and check the ITK FAQ at:
> >>>> http://www.itk.org/Wiki/ITK_FAQ
> >>>>
> >>>> Follow this link to subscribe/unsubscribe:
> >>>> http://www.itk.org/mailman/listinfo/insight-users
> >>>>
> >>>
> >>>
> >>> _____________________________________
> >>> Powered by www.kitware.com
> >>>
> >>> Visit other Kitware open-source projects at
> >>> http://www.kitware.com/opensource/opensource.html
> >>>
> >>> Kitware offers ITK Training Courses, for more information visit:
> >>> http://www.kitware.com/products/protraining.html
> >>>
> >>> Please keep messages on-topic and check the ITK FAQ at:
> >>> http://www.itk.org/Wiki/ITK_FAQ
> >>>
> >>> Follow this link to subscribe/unsubscribe:
> >>> http://www.itk.org/mailman/listinfo/insight-users
> >>>
> >>>
> >> _______________________________________________
> >> Powered by www.kitware.com
> >>
> >> Visit other Kitware open-source projects at
> >> http://www.kitware.com/opensource/opensource.html
> >>
> >> Kitware offers ITK Training Courses, for more information visit:
> >> http://kitware.com/products/protraining.html
> >>
> >> Please keep messages on-topic and check the ITK FAQ at:
> >> http://www.itk.org/Wiki/ITK_FAQ
> >>
> >> Follow this link to subscribe/unsubscribe:
> >> http://www.itk.org/mailman/listinfo/insight-developers
> >>
> >
> >
> >
> > --
> >
> > ==============================
> > Stephen R. Aylward, Ph.D.
> > Director of Medical Imaging Research
> > Kitware, Inc. - North Carolina Office
> > http://www.kitware.com
> > stephen.aylward (Skype)
> > (919) 969-6990 x300
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.itk.org/pipermail/insight-users/attachments/20100717/f4a69f3e/attachment.htm>