[Insight-users] Trouble building ITK on SunOS

[Luis Ibanez]

Hi Matt,

This is looking like a misconfiguration of your compiler.

Since the error is comming from a file of the itksys directory,
we could check by building CMake from the source code.

     CMake has the same kwsys directory than ITK.

If this problem is due to a misconfiguration of your compiler
we should see the same error appear when you try compiling
CMake.

Can you please try building CMake from the source code,
(using the same compiler CC, CXX setup,) and let us know
if the build reports any compiler error  ?

The source code of CMake is available at: www.cmake.org


    Thanks


       Luis


========================
Matt Kelsey wrote:
> Luis,
> Thanks for your response.  I've implemented your suggestions with no 
> change in the results.
> I've set CC and CXX to /usr/local/bin/gcc and /usr/local/bin/c++ 
> respectively.  I also set the ITK_SOURCE_DIR and ITK_BINARY_DIR 
> variables for good measure although I've built fine without these set 
> before.  From the cvs checkout, I deleted and recreated the binary files 
> and performed a make as before.  I diff-ed the results and found them to 
> be exactly the same.  I repeated the entire operation with CXX set to 
> /usr/local/bin/g++ - no changes in output.
>  From the error file, the problem seems to be coming from problems in 
> the system header files.  I've not compiled on this machine before so I 
> don't know if it's ever been configured properly.  Thanks for your help 
> and let me know if you have any other suggestions.
> 
> Regards,
> Matt
> 
> 
> 
> On 8/8/07, *Luis Ibanez* <luis.ibanez at kitware.com 
> <mailto:luis.ibanez at kitware.com>> wrote:
> 
> 
>     Hi Matt,
> 
>     Thanks for letting us know.
> 
>     Please destroy the binary directory where you are building ITK,
>     and follow the build instructions described in the ITK Software Guide
> 
>                http://www.itk.org/ItkSoftwareGuide.pdf
> 
>     In particular, please make sure that you set the environment variables
>     CC and CXX to the C and C++ compilers respectively, *BEFORE* you run
>     ccmake.
> 
> 
>         Regards,
> 
> 
>             Luis
> 
> 
>     ----------------------
>     Matt Kelsey wrote:
>      > Hi Luis,
>      >
>      > I'm using the latest cvs checkout (earlier today) of ITK and the
>     output
>      > of the commands are:
>      >
>      > /grad2/kelsey-41> echo $CC
>      > CC: Undefined variable
>      > /grad2/kelsey-42> echo $CXX
>      > CXX: Undefined variable
>      >
>      > however I see that in the advanced cmake configuration that:
>      > CMAKE_CXX_COMPILER == /usr/local/bin/c++
>      > and
>      > CMAKE_C_COMPILER == /usr/local/bin/gcc
>      >
>      > Any thoughts?
>      >
>      > Thanks,
>      > Matt
>      >
>      >
>      >
>      > On 8/8/07, *Luis Ibanez* < luis.ibanez at kitware.com
>     <mailto:luis.ibanez at kitware.com>
>      > <mailto:luis.ibanez at kitware.com
>     <mailto:luis.ibanez at kitware.com>>> wrote:
>      >
>      >
>      >     Hi Matt,
>      >
>      >
>      >     1) What version of ITK are you using ?
>      >
>      >
>      >     2) What are the output of the following commands?
>      >
>      >           echo $CC
>      >           echo $CXX
>      >
>      >
>      >
>      >     It looks like you are using the C compiler instead
>      >     of the C++ compiler.
>      >
>      >
>      >
>      >     Please let us know about the two questions above.
>      >
>      >
>      >         Thanks
>      >
>      >
>      >            Luis
>      >
>      >
>      >     ----------------
>      >     Matt Kelsey wrote:
>      >      > Hello all,
>      >      > I'm having trouble building ITK on a new machine.  Here
>     are the
>      >     uname -a
>      >      > specs.
>      >      > SunOS arktos 5.10 Generic_125100-10 sun4u sparc
>     SUNW,Sun-Fire-V445
>      >      > Some other info:
>      >      > make --version -> GNU Make 3.80
>      >      > /usr/local/bin/gcc --version -> gcc (GCC) 3.3
>      >      > /usr/local/bin/c++ --version -> c++ (GCC) 3.3
>      >      >
>      >      > I've configured the project with ccmake version 2.4-patch
>     6 and
>      >     turned
>      >      > Examples/Test/Shared Libs off, build type Release. No
>     problems with
>      >      > ccmake.
>      >      >
>      >      > I run into trouble during the make on:
>     Utilities/MetaIO/CMakeFiles
>      >      > /ITKMetaIO.dir/metaUtils.o
>      >      >
>      >      > I've included the stdout and stderr.  Any suggestions
>     would be
>      >     appreciated.
>      >      >
>      >      > Thanks,
>      >      > Matt Kelsey
>      >      >
>      >      > link to stderr
>      >      > =========================================
>      >      > http://www.engr.siu.edu/grad2/kelsey/debug/make.err.txt
>      >      > <http://www.engr.siu.edu/grad2/kelsey/debug/make.err.txt
>     <http://www.engr.siu.edu/grad2/kelsey/debug/make.err.txt>
>      >     <http://www.engr.siu.edu/grad2/kelsey/debug/make.err.txt>>
>      >      >
>      >      >
>      >      > link to stdout
>      >      > =========================================
>      >      > http://www.engr.siu.edu/grad2/kelsey/debug/make.output.txt
>      >     < http://www.engr.siu.edu/grad2/kelsey/debug/make.output.txt>
>      >      >
>      >      >
>      >      >
>      >    
>     ------------------------------------------------------------------------
> 
>      >      >
>      >      > _______________________________________________
>      >      > Insight-users mailing list
>      >      > Insight-users at itk.org <mailto:Insight-users at itk.org>
>     <mailto: Insight-users at itk.org <mailto:Insight-users at itk.org>>
>      >      > http://www.itk.org/mailman/listinfo/insight-users
>      >
>      >
> 
>