[Insight-developers] GDCM empty cxx files

Mark Roden mmroden at gmail.com
Sun Mar 27 13:04:38 EDT 2011 

Hi Hans,

If it's acceptable to wallpaper over the warnings, we can go ahead and
pragma them out for now.

As for the lack of response, my understanding is that I have to go
through the gerrit process to submit fixes.  I went through said
process, and my submission received no attention.  This happened
twice.  So, if my understanding of the process is wrong and I can
expedite these things (should I be sending poking emails to people to
check my commits?), then please correct me.

Mark

On Sun, Mar 27, 2011 at 7:36 AM, Johnson, Hans J <hans-johnson at uiowa.edu> wrote:
> Mark,
>
> If the larger GDCM issues are being addressed outside of the ITK
> development process, then perhaps you could just silence the current ITK
> warnings and failing tests, and explicitly state in the commit message
> that this is a short term "problem avoidance in ITK" because the "problem
> solution is being addressed out-of-band and will contributed back to ITK
> proper when it is complete".   I may not be correct here, but the biggest
> problem with the GDCM compiler warnings and testing problems is that it is
> adding a lot of noise to the efforts of squashing other problems.
>
> Regarding you comments of ITK developers not responding to your request to
> fist test.  I want to remind you the YOU are THEY,  that is to say that
> you are empowered (and likely the most qualified) to fix these problems.
>
> Hans
>
> On 3/26/11 4:57 PM, "Mark Roden" <mmroden at gmail.com> wrote:
>
>>Hi Alex,
>>
>>The reality is, the tests just aren't there in ITK proper.  Fixing the
>>warnings in ITK as they stand now will cause tests in GDCM proper to
>>fail, which means that many files can't be read.  Bill's most recent
>>submission, for instance, will cause two GDCM tests to fail, but won't
>>cause any ITK tests to fail, since the test coverage just isn't there.
>> Couple that with the lack of response I got for my submissions in
>>ITK, and it's just faster for me to work in GDCM proper, fix the
>>warnings there with as much test coverage as I can get (and getting
>>those tests solved is no mean feat, especially since they're exposing
>>some interesting corner cases), and then port to ITK knowing that the
>>tests are working.
>>
>>The breaking test in ITK, the one that's not been working for many
>>months now, is just not a correct test.  The test itself was made a
>>test using a broken, invalid DICOM test, and then breaks because GDCM
>>refuses to read the broken image, which is the proper behavior as
>>specified in the DICOM specification.  The test still hasn't been
>>fixed after both Mathieu and I have repeatedly pointed out that it's a
>>broken test, and attempts to fix it have been ignored.
>>
>>So, I believe that working in GDCM proper is the right thing to do to
>>fix these warnings in some kind of timely manner.  The ITK development
>>process has just been too slow, and I want to ensure that
>>functionality isn't broken in ITK that works in GDCM proper due to
>>attempts to fix warnings quickly.  I would also love it if the GDCM
>>tests and testing library could be included in ITK's test suite, but I
>>don't know how that would work.
>>
>>Mark
>>
>>On Sat, Mar 26, 2011 at 12:41 AM, Alexandre GOUAILLARD
>><agouaillard at gmail.com> wrote:
>>> mark,
>>>
>>> as indicated many times,
>>> our duty goes to ITK and not to gdcm proper.
>>> The priority is to fix the warning on the itk dashboard first.
>>> Brad king mentionned you could modify in ITK and backport to gdcm later.
>>> I explained to you how you could also have a separate git rep. to be
>>> the buffer between gdcm and itk if need be.
>>>
>>> now, our duty goes to ITK. The priority is to make the ITK dashboard
>>>green
>>>
>>> alex.
>>>
>>>
>>> On Sat, Mar 26, 2011 at 6:14 AM, Bill Lorensen
>>><bill.lorensen at gmail.com> wrote:
>>>> Whatever is the best approach to fix the gdcm warnings. They are the
>>>>major
>>>> source of warnings are really getting annoying. They have been present
>>>>since
>>>> last summer.  I will continue to fix gdcm warnings until I see them
>>>>dropping
>>>> through another means.
>>>>
>>>> On Fri, Mar 25, 2011 at 6:10 PM, Mark Roden <mmroden at gmail.com> wrote:
>>>>>
>>>>> Ah, thanks for that.
>>>>>
>>>>> Since it took so long for my last gerrit patch to get a review, I've
>>>>> switched to fixing tests and warnings in the gdcm main branch.  My
>>>>> hope was to be able to drop that chunk of code into ITK, with the
>>>>> warnings fixed there.  Many of them have already been fixed in ITK,
>>>>> but moving over fixes from ITK to gdcm main produced some failing gdcm
>>>>> tests.  These tests don't exist in ITK (hence removing the GDCM build
>>>>> option from the ITK cmake options), and the ITK gdcm tests appear to
>>>>> be building and running just fine (with the exception of IO test 5,
>>>>> and that looks to be the same broken test it's always been, and should
>>>>> be removed from the test suite).
>>>>>
>>>>> Is this approach a valid one?  I mean, it's taken around 2 weeks for
>>>>> someone to review an ITK gerrit patch from me, but in the meantime,
>>>>> I've been able to make much faster progress in the gdcm main branch
>>>>> with this approach.  And, I think, a safer one, since there is more
>>>>> complete test coverage.
>>>>>
>>>>> Mark
>>>>>
>>>>> On Fri, Mar 25, 2011 at 3:05 PM, Bill Lorensen
>>>>><bill.lorensen at gmail.com>
>>>>> wrote:
>>>>> > I have the fix in my gerrit patch.
>>>>> >
>>>>> > On Fri, Mar 25, 2011 at 3:33 PM, Mark Roden <mmroden at gmail.com>
>>>>>wrote:
>>>>> >>
>>>>> >> I thought I submitted a patch for this as well, but it probably
>>>>>didn't
>>>>> >> make it over the ITK modularization boundary.
>>>>> >>
>>>>> >> The last patch I submitted was done after the ITK changeover, but I
>>>>> >> guess the changeover was ongoing when I submitted the patch, and so
>>>>> >> now I have to redo it.  That's the
>>>>> >> getting-rid-of-superfluous-cmake-options patch.
>>>>> >>
>>>>> >> On Fri, Mar 25, 2011 at 12:21 PM, Ryan, William J.
>>>>> >> <ryan.william at mayo.edu> wrote:
>>>>> >> > I think Mark Roden had a patch submitted that may fix this, but
>>>>>I'm
>>>>> >> > not
>>>>> >> > 100%
>>>>> >> > sure about that.  Let's see what he has to say.
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> >   Bill Ryan
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> > From: insight-developers-bounces at itk.org
>>>>> >> > [mailto:insight-developers-bounces at itk.org] On Behalf Of Bill
>>>>> >> > Lorensen
>>>>> >> > Sent: Friday, March 25, 2011 1:23 PM
>>>>> >> > To: Mathieu Malaterre
>>>>> >> > Cc: Insight Developers
>>>>> >> > Subject: Re: [Insight-developers] GDCM empty cxx files
>>>>> >> >
>>>>> >> >
>>>>> >> >
>>>>> >> > Mathieu,
>>>>> >> >
>>>>> >> > We still support VS7.1. I would like to submit a patch that
>>>>>removes
>>>>> >> > these
>>>>> >> > files from the lib and see if it works.
>>>>> >> >
>>>>> >> > Unfortunately, the VS generator does not work with the
>>>>>modularized
>>>>> >> > ITK.
>>>>> >> > We
>>>>> >> > may not be able to thoroughly test it until the patched cmake is
>>>>> >> > released.
>>>>> >> >
>>>>> >> > Thanks,
>>>>> >> >
>>>>> >> > Bill
>>>>> >> >
>>>>> >> > On Fri, Mar 25, 2011 at 2:13 PM, Mathieu Malaterre
>>>>> >> > <mathieu.malaterre at gmail.com> wrote:
>>>>> >> >
>>>>> >> > From the top of my head, this was V7.1 with /MT as compilation
>>>>>flag
>>>>> >> > (instead of the default /MD used by Cmake). Can't remember if
>>>>>this
>>>>> >> > was
>>>>> >> > using shared or static lib.
>>>>> >> >
>>>>> >> > Does anyone still have this compiler ?
>>>>> >> >
>>>>> >> > HTH
>>>>> >> >
>>>>> >> > On Fri, Mar 25, 2011 at 7:06 PM, Bill Lorensen
>>>>> >> > <bill.lorensen at gmail.com>
>>>>> >> > wrote:
>>>>> >> >> Mathieu,
>>>>> >> >>
>>>>> >> >> Several files including gdcmObject.cxx have no code in them.
>>>>>Your
>>>>> >> >> comment
>>>>> >> >> in
>>>>> >> >> gdcmObject.cxx says:
>>>>> >> >>   // Don't ask why, but this is EXTREMELY important on Win32
>>>>> >> >>   // Apparently the compiler is doing something special the
>>>>>first
>>>>> >> >> time
>>>>> >> >> it
>>>>> >> >> compiles
>>>>> >> >>   // this instanciation unit
>>>>> >> >>   // If this fake file is not present I get an unresolved
>>>>>symbol for
>>>>> >> >> each
>>>>> >> >> function
>>>>> >> >>   // of the gdcm::Object class
>>>>> >> >>
>>>>> >> >> When linking these "empty" files, VS10 reports several warnings:
>>>>> >> >>  warning LNK4221: This object file does not define any
>>>>>previously
>>>>> >> >> undefined
>>>>> >> >> public symbols, so it will not be used by any link operation
>>>>>that
>>>>> >> >> consumes
>>>>> >> >> this library
>>>>> >> >>
>>>>> >> >> I have removed this file from the lib as well as
>>>>> >> >> gdcmProgressEvent.cxx, gdcmString.cxx, gdcmException.cxx
>>>>> >> >> gdcmDeflateStream.cxx and gdcmByteSwap.cxx
>>>>> >> >>
>>>>> >> >> When I build the modified lib, I do not get the warnoings, nor
>>>>>do I
>>>>> >> >> get
>>>>> >> >> any
>>>>> >> >> errors.
>>>>> >> >>
>>>>> >> >> What compiler was giving the errors you mention in the comments?
>>>>> >> >>
>>>>> >> >> Bill
>>>>> >> >>
>>>>> >> >
>>>>> >> >
>>>>> >> > --
>>>>> >> > Mathieu
>>>>> >> >
>>>>> >> >
>>>>> >
>>>>> >
>>>>
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Kitware offers ITK Training Courses, for more information visit:
>>>> http://kitware.com/products/protraining.html
>>>>
>>>> Please keep messages on-topic and check the ITK FAQ at:
>>>> http://www.itk.org/Wiki/ITK_FAQ
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.itk.org/mailman/listinfo/insight-developers
>>>>
>>>>
>>>
>>_______________________________________________
>>Powered by www.kitware.com
>>
>>Visit other Kitware open-source projects at
>>http://www.kitware.com/opensource/opensource.html
>>
>>Kitware offers ITK Training Courses, for more information visit:
>>http://kitware.com/products/protraining.html
>>
>>Please keep messages on-topic and check the ITK FAQ at:
>>http://www.itk.org/Wiki/ITK_FAQ
>>
>>Follow this link to subscribe/unsubscribe:
>>http://www.itk.org/mailman/listinfo/insight-developers
>
>
>
> ________________________________
> Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be legally privileged.  If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited.  Please reply to the sender that you have received the message in error, then delete it.  Thank you.
> ________________________________
>

More information about the Insight-developers mailing list