[Insight-developers] can't push to gerrit

Marcus D. Hanwell marcus.hanwell at kitware.com
Wed Mar 2 09:09:46 EST 2011 

The fetch is just to test that you have the gerrit remote set up
correctly. I would do that first as I suggested, then push your
change. This is all documented on the wiki page I pointed to as well,
I will go over the page again to check nothing is missing.

On Wed, Mar 2, 2011 at 8:58 AM, Mark Roden <mmroden at gmail.com> wrote:
> So do I do
> git fetch gerrit
> then do the push, or should I push what appears to be the entire repo back?
>
>
>
> On Wed, Mar 2, 2011 at 5:54 AM, Marcus D. Hanwell
> <marcus.hanwell at kitware.com> wrote:
>> You misunderstand, your Gerrit username is not your email. It is the
>> username you chose in Settings (upper right) ->
>> Profile -> Username in the Gerrit web interface. In your case I can
>> see from the successful SSH authentication it should read,
>>
>> mmroden at review.source.kitware.com:ITK
>>
>> That should then get git fetch gerrit working, and the push command
>> you tried should work as expected.
>>
>> Marcus
>>
>> On Wed, Mar 2, 2011 at 12:38 AM, Mark Roden <mmroden at gmail.com> wrote:
>>> OK, I changed the name in the .git/config file to be
>>> mmroden at review.source.kitware.com:ITK, rather than
>>> mmroden at gmail.com@review.source.kitware.com:ITK.
>>>
>>> Now, this happens:
>>> Mark-Rodens-MacBook-Pro:ITK mmroden$ git push gerrit
>>> HEAD:refs/for/master/GDCMHiddenFunctionWarnings
>>> Counting objects: 28353, done.
>>> Delta compression using up to 4 threads.
>>> Compressing objects: 100% (7854/7854), done.
>>> ^CKilled by signal 2. (8931/25848), 7.82 MiB | 39 KiB/s
>>>
>>> It looks like it's trying to push the entire repository back to
>>> gerrit, rather than the most recent change.  git gerrit-push does the
>>> same thing.
>>>
>>> So how to get just the most recent commit then?
>>>
>>> Mark
>>>
>>> On Tue, Mar 1, 2011 at 8:52 PM, Matthew McCormick (thewtex)
>>> <matt at mmmccormick.com> wrote:
>>>> Nevermind, I didn't read the entire thread.  Sorry for the noise.
>>>>
>>>> On Tue, Mar 1, 2011 at 10:49 PM, Matthew McCormick (thewtex)
>>>> <matt at mmmccormick.com> wrote:
>>>>> Hi Mark,
>>>>>
>>>>> The username should be @review.kitware.source.com.  It should be the
>>>>> value found in the Gerrit interface at Settings (upper right) ->
>>>>> Profile -> Username.
>>>>>
>>>>> A likely problem is that the ssh public for the computer you are
>>>>> working on hasn't been uploaded.  Gerrit -> Settings (upper right) ->
>>>>> Profile -> SSH Public Keys.  Reminder: this file is probably found at
>>>>> ~/.ssh/id_rsa.pub.  If does not exist, it can be created with the
>>>>> command 'ssh-keygen'.
>>>>>
>>>>> Hope this helps,
>>>>> Matt
>>>>>
>>>>> On Tue, Mar 1, 2011 at 6:27 PM, Mark Roden <mmroden at gmail.com> wrote:
>>>>>> Well, the
>>>>>> git fetch -v gerrit
>>>>>> failed, because my username isn't @review.kitware.source.com, but is
>>>>>> @gmail.com.  Do I need to be using a different email address?
>>>>>>
>>>>>> The result was:
>>>>>>
>>>>>> ssh: connect to host gmail.com port 22: Operation timed out
>>>>>> fatal: The remote end hung up unexpectedly
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Mar 1, 2011 at 3:19 PM, Marcus D. Hanwell
>>>>>> <marcus.hanwell at kitware.com> wrote:
>>>>>>> I would suggest you look at your .git/config file, the gerrit remote.
>>>>>>> You should check that the username is correct, and the URL is correct
>>>>>>>
>>>>>>> git fetch -v gerrit
>>>>>>>
>>>>>>> Would show you the location it is using, and whether a basic fetch
>>>>>>> works. You can run the SetupForDevelopment.sh script a second time in
>>>>>>> order to correct a bad username for example. Is this Windows, or
>>>>>>> Linux? I think running the latest script would be a good idea to check
>>>>>>> you have an up to date setup.
>>>>>>>
>>>>>>> I could take a look at your .git/config if you send it to me off-list,
>>>>>>> it sounds like something is possibly broken in there. Most of the time
>>>>>>> running the setup script again will correct issues there.
>>>>>>>
>>>>>>> Marcus
>>>>>>>
>>>>>>> On Tue, Mar 1, 2011 at 5:43 PM, Mark Roden <mmroden at gmail.com> wrote:
>>>>>>>> Here's the result of the git log -1 command:
>>>>>>>>
>>>>>>>> git log -1
>>>>>>>> commit 413102b25d1c9eee60eace2585c2f857ad564a67
>>>>>>>> Author: Mark Roden <mmroden at gmail.com>
>>>>>>>> Date:   Tue Mar 1 12:42:32 2011 -0800
>>>>>>>>
>>>>>>>>    COMP: attempts to fix gdcm function hiding warnings
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Mar 1, 2011 at 2:17 PM, David Cole <david.cole at kitware.com> wrote:
>>>>>>>>> So ssh connectivity looks good.
>>>>>>>>>
>>>>>>>>> I'm afraid I'm at the end of my helpfulness for the day... (because I lack
>>>>>>>>> the knowledge... not because I've run out of helpfulness)
>>>>>>>>>
>>>>>>>>> Hopefully somebody else picks it from here for you. Sorry this is so
>>>>>>>>> frustrating.
>>>>>>>>>
>>>>>>>>> Is there anything funky about the commit? What's the commit message like?
>>>>>>>>>
>>>>>>>>> Send along the output of:
>>>>>>>>>
>>>>>>>>>   git log -1
>>>>>>>>>
>>>>>>>>> Maybe something in the commit message is unparseable by the helper
>>>>>>>>> scripts....?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Mar 1, 2011 at 5:11 PM, Mark Roden <mmroden at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009
>>>>>>>>>> debug1: Reading configuration data /etc/ssh_config
>>>>>>>>>> debug1: Connecting to review.source.kitware.com [66.162.65.213] port 22.
>>>>>>>>>> debug1: Connection established.
>>>>>>>>>> debug1: identity file /Users/mmroden/.ssh/identity type -1
>>>>>>>>>> debug1: identity file /Users/mmroden/.ssh/id_rsa type 1
>>>>>>>>>> debug1: identity file /Users/mmroden/.ssh/id_dsa type -1
>>>>>>>>>> debug1: Remote protocol version 2.0, remote software version
>>>>>>>>>> GerritCodeReview_2.1.6.1 (SSHD-CORE-0.5.1-R1033260)
>>>>>>>>>> debug1: no match: GerritCodeReview_2.1.6.1 (SSHD-CORE-0.5.1-R1033260)
>>>>>>>>>> debug1: Enabling compatibility mode for protocol 2.0
>>>>>>>>>> debug1: Local version string SSH-2.0-OpenSSH_5.2
>>>>>>>>>> debug1: SSH2_MSG_KEXINIT sent
>>>>>>>>>> debug1: SSH2_MSG_KEXINIT received
>>>>>>>>>> debug1: kex: server->client aes128-cbc hmac-md5 none
>>>>>>>>>> debug1: kex: client->server aes128-cbc hmac-md5 none
>>>>>>>>>> debug1: sending SSH2_MSG_KEXDH_INIT
>>>>>>>>>> debug1: expecting SSH2_MSG_KEXDH_REPLY
>>>>>>>>>> debug1: Host 'review.source.kitware.com' is known and matches the RSA host
>>>>>>>>>> key.
>>>>>>>>>> debug1: Found key in /Users/mmroden/.ssh/known_hosts:4
>>>>>>>>>> debug1: ssh_rsa_verify: signature correct
>>>>>>>>>> debug1: SSH2_MSG_NEWKEYS sent
>>>>>>>>>> debug1: expecting SSH2_MSG_NEWKEYS
>>>>>>>>>> debug1: SSH2_MSG_NEWKEYS received
>>>>>>>>>> debug1: SSH2_MSG_SERVICE_REQUEST sent
>>>>>>>>>> debug1: SSH2_MSG_SERVICE_ACCEPT received
>>>>>>>>>> debug1: Authentications that can continue: publickey
>>>>>>>>>> debug1: Next authentication method: publickey
>>>>>>>>>> debug1: Offering public key: /Users/mmroden/.ssh/id_rsa
>>>>>>>>>> debug1: Server accepts key: pkalg ssh-rsa blen 277
>>>>>>>>>> debug1: Authentication succeeded (publickey).
>>>>>>>>>> debug1: channel 0: new [client-session]
>>>>>>>>>> debug1: Entering interactive session.
>>>>>>>>>> debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
>>>>>>>>>>
>>>>>>>>>>  ****    Welcome to Gerrit Code Review    ****
>>>>>>>>>>
>>>>>>>>>>  Hi Mark Roden, you have successfully connected over SSH.
>>>>>>>>>>
>>>>>>>>>>  Unfortunately, interactive shells are disabled.
>>>>>>>>>>  To clone a hosted Git repository, use:
>>>>>>>>>>
>>>>>>>>>>  git clone
>>>>>>>>>> ssh://mmroden@review.source.kitware.com:29418/REPOSITORY_NAME.git
>>>>>>>>>>
>>>>>>>>>> debug1: channel 0: free: client-session, nchannels 1
>>>>>>>>>> Connection to review.source.kitware.com closed.
>>>>>>>>>> Transferred: sent 2552, received 2208 bytes, in 0.3 seconds
>>>>>>>>>> Bytes per second: sent 8761.2, received 7580.2
>>>>>>>>>> debug1: Exit status 127
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Mar 1, 2011 at 2:03 PM, David Cole <david.cole at kitware.com> wrote:
>>>>>>>>>> > What is the output of running "ssh -v user at review.source.kitware.com"?
>>>>>>>>>> >
>>>>>>>>>> > (Where "user" is your gerrit user name...)
>>>>>>>>>> >
>>>>>>>>>> >
>>>>>>>>>> > On Tue, Mar 1, 2011 at 4:51 PM, Mark Roden <mmroden at gmail.com> wrote:
>>>>>>>>>> >>
>>>>>>>>>> >> Gotcha.
>>>>>>>>>> >>
>>>>>>>>>> >> OK, I've reset the master branch to origin/master with --hard, then
>>>>>>>>>> >> switched to the new branch.
>>>>>>>>>> >>
>>>>>>>>>> >> git gerrit-push
>>>>>>>>>> >> still produces
>>>>>>>>>> >> ^Cfatal: Failed to run 'sh -c "git push gerrit
>>>>>>>>>> >> HEAD:refs/for/master/$(git symbolic-ref HEAD | sed -e
>>>>>>>>>> >> 's|^refs/heads/||')"' when expanding alias 'gerrit-push'
>>>>>>>>>> >>
>>>>>>>>>> >> when broken, and seems to freeze otherwise.
>>>>>>>>>> >>
>>>>>>>>>> >> On Tue, Mar 1, 2011 at 1:44 PM, David Cole <david.cole at kitware.com>
>>>>>>>>>> >> wrote:
>>>>>>>>>> >> > Does "git log -1" report the same commit on each branch?
>>>>>>>>>> >> >
>>>>>>>>>> >> > git checkout master
>>>>>>>>>> >> > git log -1
>>>>>>>>>> >> >
>>>>>>>>>> >> > git checkout GDCMHiddenFunctionWarnings
>>>>>>>>>> >> > git log -1
>>>>>>>>>> >> >
>>>>>>>>>> >> > If you do a "gitk" does "master" and "GDCMHiddenFunctionWarnings"
>>>>>>>>>> >> > point
>>>>>>>>>> >> > to
>>>>>>>>>> >> > the same commit?
>>>>>>>>>> >> >
>>>>>>>>>> >> > If so, then you're safe.
>>>>>>>>>> >> >
>>>>>>>>>> >> > The "ahead by 1 commit" message means that you have (locally) one
>>>>>>>>>> >> > more
>>>>>>>>>> >> > commit than the branch you're tracking. (master compared to
>>>>>>>>>> >> > "origin/master",
>>>>>>>>>> >> > NOT master compared to your topic branch...)
>>>>>>>>>> >> >
>>>>>>>>>> >> >
>>>>>>>>>> >> > HTH,
>>>>>>>>>> >> > David
>>>>>>>>>> >> >
>>>>>>>>>> >> >
>>>>>>>>>> >> > On Tue, Mar 1, 2011 at 4:37 PM, Mark Roden <mmroden at gmail.com> wrote:
>>>>>>>>>> >> >>
>>>>>>>>>> >> >> The new branch does not contain the commit, that's what I'm saying.
>>>>>>>>>> >> >> The master branch remains ahead by 1 commit.  Git status on the new
>>>>>>>>>> >> >> branch returns:
>>>>>>>>>> >> >> # On branch GDCMHiddenFunctionWarnings
>>>>>>>>>> >> >> # Untracked files:
>>>>>>>>>> >> >> #   (use "git add <file>..." to include in what will be committed)
>>>>>>>>>> >> >> #
>>>>>>>>>> >> >> #       .DS_Store
>>>>>>>>>> >> >> #       ITK_Osirix_Test_Data/
>>>>>>>>>> >> >> nothing added to commit but untracked files present (use "git add"
>>>>>>>>>> >> >> to
>>>>>>>>>> >> >> track)
>>>>>>>>>> >> >>
>>>>>>>>>> >> >> So I'd rather not reset the master until the commit is safe.
>>>>>>>>>> >> >>
>>>>>>>>>> >> >> On Tue, Mar 1, 2011 at 1:33 PM, David Cole <david.cole at kitware.com>
>>>>>>>>>> >> >> wrote:
>>>>>>>>>> >> >> > After you have the new branch, containing the commit, it's safe to
>>>>>>>>>> >> >> > do:
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >> > git checkout master
>>>>>>>>>> >> >> > git reset --hard origin/master
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >> > That will put your local master back to the same state as what's
>>>>>>>>>> >> >> > on
>>>>>>>>>> >> >> > origin,
>>>>>>>>>> >> >> > and then your commit will "only" be on the topic branch.
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >> > Commits may be "reached" from many different branches with git.
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >> > On Tue, Mar 1, 2011 at 4:30 PM, Mark Roden <mmroden at gmail.com>
>>>>>>>>>> >> >> > wrote:
>>>>>>>>>> >> >> >>
>>>>>>>>>> >> >> >> Hi Marcus,
>>>>>>>>>> >> >> >>
>>>>>>>>>> >> >> >> git checkout -b my-topic is making a new branch, but the commit
>>>>>>>>>> >> >> >> remains in the master branch.  Is this a git version thing,
>>>>>>>>>> >> >> >> possibly?
>>>>>>>>>> >> >> >>
>>>>>>>>>> >> >> >> Mark
>>>>>>>>>> >> >> >>
>>>>>>>>>> >> >> >> On Tue, Mar 1, 2011 at 1:16 PM, Marcus D. Hanwell
>>>>>>>>>> >> >> >> <marcus.hanwell at kitware.com> wrote:
>>>>>>>>>> >> >> >> > If you are on your master, you can simply do a,
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > git checkout -b my-topic
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > That will give you a new topic branch with the commits from
>>>>>>>>>> >> >> >> > your
>>>>>>>>>> >> >> >> > local
>>>>>>>>>> >> >> >> > master. At some point you will want to reset your local master,
>>>>>>>>>> >> >> >> > warning - if you don't make a topic branch as described above
>>>>>>>>>> >> >> >> > you
>>>>>>>>>> >> >> >> > could lose some commits.
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > git checkout master
>>>>>>>>>> >> >> >> > git reset --hard origin/master
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > The wiki page for developers,
>>>>>>>>>> >> >> >> > http://www.itk.org/Wiki/ITK/Git/Develop
>>>>>>>>>> >> >> >> > will give more details. If you are having trouble with the push
>>>>>>>>>> >> >> >> > then
>>>>>>>>>> >> >> >> > you can test authentication using the SetupForDevelopment.sh
>>>>>>>>>> >> >> >> > script.
>>>>>>>>>> >> >> >> > A
>>>>>>>>>> >> >> >> > quick 'ssh -v review.source.kitware.com' would test
>>>>>>>>>> >> >> >> > authentication/firewall issues - it should print out a message
>>>>>>>>>> >> >> >> > telling
>>>>>>>>>> >> >> >> > you how to clone if you authenticated.
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > Hope that helps,
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > Marcus
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >> > On Tue, Mar 1, 2011 at 4:11 PM, Mark Roden <mmroden at gmail.com>
>>>>>>>>>> >> >> >> > wrote:
>>>>>>>>>> >> >> >> >> Ah, so I have to be on a branch now to do this?
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> That should probably be part of the hooks then, because I was
>>>>>>>>>> >> >> >> >> able
>>>>>>>>>> >> >> >> >> to
>>>>>>>>>> >> >> >> >> do it from master before (and was doing it from master
>>>>>>>>>> >> >> >> >> before).
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> How can I move my commit from master to some other branch to
>>>>>>>>>> >> >> >> >> do
>>>>>>>>>> >> >> >> >> the
>>>>>>>>>> >> >> >> >> checkin?
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> On Tue, Mar 1, 2011 at 1:04 PM, David Cole
>>>>>>>>>> >> >> >> >> <david.cole at kitware.com>
>>>>>>>>>> >> >> >> >> wrote:
>>>>>>>>>> >> >> >> >>> The HEAD:refs/for/master/MyCommitMessage is supposed to
>>>>>>>>>> >> >> >> >>> reference a
>>>>>>>>>> >> >> >> >>> topic branch name...
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >>> What is the name of your current branch?
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >>> git branch
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >>> (branch name with the * next to it is current...)
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >>> On Tue, Mar 1, 2011 at 3:55 PM, David Cole
>>>>>>>>>> >> >> >> >>> <david.cole at kitware.com>
>>>>>>>>>> >> >> >> >>> wrote:
>>>>>>>>>> >> >> >> >>>> Do you get the same result with the simpler?
>>>>>>>>>> >> >> >> >>>>
>>>>>>>>>> >> >> >> >>>>  git gerrit-push
>>>>>>>>>> >> >> >> >>>>
>>>>>>>>>> >> >> >> >>>>
>>>>>>>>>> >> >> >> >>>> On Tue, Mar 1, 2011 at 3:52 PM, Mark Roden
>>>>>>>>>> >> >> >> >>>> <mmroden at gmail.com>
>>>>>>>>>> >> >> >> >>>> wrote:
>>>>>>>>>> >> >> >> >>>>> Hi all,
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> So I think I've solved some of the gdcm warnings, but can't
>>>>>>>>>> >> >> >> >>>>> push
>>>>>>>>>> >> >> >> >>>>> to
>>>>>>>>>> >> >> >> >>>>> gerrit.  What's changed here?
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> I've followed the ./Utilities/Setup etc script.
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> I do
>>>>>>>>>> >> >> >> >>>>> git commit -a -m "COMP: My Commit Message"
>>>>>>>>>> >> >> >> >>>>> then
>>>>>>>>>> >> >> >> >>>>> git push gerrit HEAD:refs/for/master/MyCommitMessage
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> And nothing happens, the command line just freezes.  My id
>>>>>>>>>> >> >> >> >>>>> is
>>>>>>>>>> >> >> >> >>>>> set
>>>>>>>>>> >> >> >> >>>>> to
>>>>>>>>>> >> >> >> >>>>> mmroden at gmail.com, and my ssh key is in gerrit, and I can
>>>>>>>>>> >> >> >> >>>>> log
>>>>>>>>>> >> >> >> >>>>> in
>>>>>>>>>> >> >> >> >>>>> to
>>>>>>>>>> >> >> >> >>>>> the gerrit website.
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> I was following the instructions here:
>>>>>>>>>> >> >> >> >>>>> http://www.visualizationtoolkit.org/Wiki/ITK/Gerrit
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> Please help,
>>>>>>>>>> >> >> >> >>>>> Mark
>>>>>>>>>> >> >> >> >>>>> _______________________________________________
>>>>>>>>>> >> >> >> >>>>> Powered by www.kitware.com
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> Visit other Kitware open-source projects at
>>>>>>>>>> >> >> >> >>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> Kitware offers ITK Training Courses, for more information
>>>>>>>>>> >> >> >> >>>>> visit:
>>>>>>>>>> >> >> >> >>>>> http://kitware.com/products/protraining.html
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> Please keep messages on-topic and check the ITK FAQ at:
>>>>>>>>>> >> >> >> >>>>> http://www.itk.org/Wiki/ITK_FAQ
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>> >> >> >> >>>>> http://www.itk.org/mailman/listinfo/insight-developers
>>>>>>>>>> >> >> >> >>>>>
>>>>>>>>>> >> >> >> >>>>
>>>>>>>>>> >> >> >> >>>
>>>>>>>>>> >> >> >> >> _______________________________________________
>>>>>>>>>> >> >> >> >> Powered by www.kitware.com
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> Visit other Kitware open-source projects at
>>>>>>>>>> >> >> >> >> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> Kitware offers ITK Training Courses, for more information
>>>>>>>>>> >> >> >> >> visit:
>>>>>>>>>> >> >> >> >> http://kitware.com/products/protraining.html
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> Please keep messages on-topic and check the ITK FAQ at:
>>>>>>>>>> >> >> >> >> http://www.itk.org/Wiki/ITK_FAQ
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >> Follow this link to subscribe/unsubscribe:
>>>>>>>>>> >> >> >> >> http://www.itk.org/mailman/listinfo/insight-developers
>>>>>>>>>> >> >> >> >>
>>>>>>>>>> >> >> >> >
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >> >
>>>>>>>>>> >> >
>>>>>>>>>> >> >
>>>>>>>>>> >
>>>>>>>>>> >
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Powered by www.kitware.com
>>>>>>
>>>>>> Visit other Kitware open-source projects at
>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>
>>>>>> Kitware offers ITK Training Courses, for more information visit:
>>>>>> http://kitware.com/products/protraining.html
>>>>>>
>>>>>> Please keep messages on-topic and check the ITK FAQ at:
>>>>>> http://www.itk.org/Wiki/ITK_FAQ
>>>>>>
>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>> http://www.itk.org/mailman/listinfo/insight-developers
>>>>>>
>>>>>
>>>>
>>>
>>
>

More information about the Insight-developers mailing list