[IGSTK-Users] CT image not loading properly

[Ariose Software]

Hi Patrick,    Thanks again for your quick response.  How do I pan and zoom the images ? I did see the other needle tip and path but am still trying to center the thing.
RegardsAmit.

--- On Tue, 2/15/11, Patrick Cheng <cheng at isis.georgetown.edu> wrote:

From: Patrick Cheng <cheng at isis.georgetown.edu>
Subject: Re: [IGSTK-Users] CT image not loading properly
To: "Ariose Software" <ariosesoftware at yahoo.com>
Cc: "Andinet Enquobahrie" <andinet.enqu at kitware.com>, igstk-users at public.kitware.com
Date: Tuesday, February 15, 2011, 6:55 AM

Hi Ariose,

You are probably wondering why the image are not centered in the view 
window like other radiology image viewers.

This is how the viewer being designed to work in IGSTK, it tries to 
display all objects in the scene. Notice that you have objects other 
than images displayed in the view as well (green tubes to represent 
needle and path). You can pan and zoom the image to get them to the center.

Patrick

On 2/15/2011 2:21 AM, Ariose Software wrote:
> Hi Patrick,
> I tried with the slice set at the site you included. I am including a
> screenshot from the NeedleBopsy application based on that. I still fel
> there is something wrong I am doing. Please have a look at the
> screenshot and see if there is something I might be missing out.
> Thanks.
>
>
> --- On *Sun, 2/13/11, Patrick Cheng /<cheng at isis.georgetown.edu>/* wrote:
>
>
>     From: Patrick Cheng <cheng at isis.georgetown.edu>
>     Subject: Re: [IGSTK-Users] CT image not loading properly
>     To: "Ariose Software" <ariosesoftware at yahoo.com>
>     Cc: "Andinet Enquobahrie" <andinet.enqu at kitware.com>,
>     igstk-users at public.kitware.com
>     Date: Sunday, February 13, 2011, 1:46 PM
>
>     It looks like you only have a few slices.
>
>     You can download and try this full scan of a test phantom:
>
>     http://www.insight-journal.org/midas/item/view/2206
>
>     Patrick
>
>
>     On 2/13/11 9:57 AM, Ariose Software wrote:
>      > Here is a screenshot of the application:
>      >
>      > How do I print the dimensions of the CT Volume.
>      >
>      >
>      > --- On *Sun, 2/13/11, Andinet Enquobahrie
>     /<andinet.enqu at kitware.com
>     <http://us.mc1614.mail.yahoo.com/mc/compose?to=andinet.enqu@kitware.com>>/*
>      > wrote:
>      >
>      >
>      > From: Andinet Enquobahrie <andinet.enqu at kitware.com
>     <http://us.mc1614.mail.yahoo.com/mc/compose?to=andinet.enqu@kitware.com>>
>      > Subject: Re: [IGSTK-Users] CT image not loading properly
>      > To: "Ariose Software" <ariosesoftware at yahoo.com
>     <http://us.mc1614.mail.yahoo.com/mc/compose?to=ariosesoftware@yahoo.com>>
>      > Cc: igstk-users at public.kitware.com
>     <http://us.mc1614.mail.yahoo.com/mc/compose?to=igstk-users@public.kitware.com>
>      > Date: Sunday, February 13, 2011, 3:30 AM
>      >
>      > Hi:
>      >
>      > What are the dimensions of your CT volume? ( X, Y, Z directions )
>      >
>      > On Sun, Feb 13, 2011 at 1:32 AM, Ariose Software
>      > <ariosesoftware at yahoo.com
>     <http://us.mc1614.mail.yahoo.com/mc/compose?to=ariosesoftware@yahoo.com>
>     </mc/compose?to=ariosesoftware at yahoo.com
>     <http://us.mc1614.mail.yahoo.com/mc/compose?to=ariosesoftware@yahoo.com>>>
>      > wrote:
>      >
>      > Hi All,
>      > I am trying to load a CT image series in the application
>      > NeedleBiopsy. However, the Axial view seems to load fine while
>      > the Coronal and Sagittal views are coming as very thin
>      > rectangles. I was wondering if somebody had seen this issue in
>      > the past or could guide me on some mistakes I might be doing
>      > potentially. The application is built on Ubuntu platform .
>      >
>      >
>      >
>      > _______________________________________________
>      > Powered by www.kitware.com <http://www.kitware.com
>     <http://www.kitware.com/>>
>      >
>      > Visit other Kitware open-source projects at
>      > http://www.kitware.com/opensource/opensource.html
>      >
>      > Follow this link to subscribe/unsubscribe:
>      > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
>      >
>      >
>      >
>      >
>      > --
>      > Andinet Enquobahrie, Ph.D.
>      > Technical Lead
>      > Kitware, Inc.
>      >
>      > http://www.kitware.com <http://www.kitware.com/>
>      > (919) 969-6990 x311
>      >
>      >
>      >
>      >
>      > _______________________________________________
>      > Powered by www.kitware.com
>      >
>      > Visit other Kitware open-source projects at
>     http://www.kitware.com/opensource/opensource.html
>      >
>      > Follow this link to subscribe/unsubscribe:
>      > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
>
>



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/igstk-users/attachments/20110216/227c87f1/attachment.html>