[IGSTK-Users] running application : Problem compiling ITK 3.0.1 with Visual Studio 2005
Luis Ibanez
luis.ibanez at kitware.com
Tue Aug 21 09:28:54 EDT 2007
Hi Somayeh,
Thanks for the additional details.
Please note that:
1) VTK is a library, there are no executables in it.
2) ITK is a library, there are no executables in it.
Only if you enable the building of "Examples" or the
building of "Test" in ITK or VTK, then you will have
executables to run. However, these executables are
intended just to demonstrate the use of the libraries,
they are just additional material to the libraries.
You seem to be confusing the term *"debugging"* with
the term *"compiling"*. Building means to *"compile"*
Debugging means to *"run"* an executable in debug mode.
What you need to do is to "Build" : ITK, VTK and FLTK.
Then you can "Build" : IGSTK
and then you can test the IGSTK Examples.
If you are using visual studio, what you need to
select in the IDE is the option "Build" a project,
or use the shortcut of hitting the "F7" key.
DO NOT use the "F5" and DO NOT select "Debug".
From your previous emails I summarize the state
of your build in the following way:
a) You are using Visual Studio 2005
b) You can build(compile) FLTK without errors
c) You can build(compile) VTK without errors
d) You are getting errors while building ITK.
From the error message that you get when building
ITK, one common suspect is that you may have
put the source code of ITK in a directory name
that is too long:
E:\somin\setup file\ITK\InsightToolkit-3.0.1\InsightToolkit-3.0.1\
I will suggest you to reduce it to something like:
E:\somin\setup file\ITK-3.0.1
Visual Studio is known to have problems when dealing
with long paths, because it has a low limit for the
number of characters used in the command line of the
compiler. The IDE usually fails to report the problem
correctly.
Once you complete your build of ITK, you will be able
to try compiling IGSTK.
Please give it a try to put the source code of ITK
is a directory with a smaller path, and let us know
if you still have any problems compiling ITK.
Thanks
Luis
------------------------
somayeh khademi wrote:
> Hello,
> thanks luis for answer,
>
> Answer for your quistion:
>
> a) yes, I don`t have any compile error during VTK debuging,It just ask
> me for executable file name.(that I don`t know where is the right
> executable file name for continue?)
>
> b) yes,I don`t have any problem with building FLTK, (after set the
> option in config.h file).
> I can run fluid.exe .
>
> I attach again buildlog.htm file of ITK for you.
>
> thanks.
>
>
> On 8/20/07, *Luis Ibanez* <luis.ibanez at kitware.com
> <mailto:luis.ibanez at kitware.com>> wrote:
>
>
> Hi Somayeh,
>
> Let's go in order:
>
> 1) You *CAN NOT* build IGSTK until you have
> built ITK and VTK.
>
> 2) You say that you are "debugging" ITK, but
> from the error messages it seems that you
> have not finished "building" ITK.
>
> 3) Thanks for sending the BuildLog.htm.
> Unfortunately you are using a character
> set that is not readable in the email.
>
>
> It seems that your compiler is not properly
> installed and/or configured...
>
>
> Please answer the following questions:
>
>
> a) Were you able to build VTK 5.0.3
> with your VS2005 compiler without
> getting any errors ?
>
>
> b) Were you able to build FLTK
> with your VS2005 compiler without
> getting any errors ?
>
>
>
>
> Please let us know.
>
>
> Thanks
>
>
>
> Luis
>
>
>
> -------------------------
> somayeh khademi wrote:
> > thanks for your answer,
> >
> > I do it but I have a problem,
> > (I use vtk 5.0.3 , ITK 3.0.1 , FLTK 1.1.7. and IGSTK 2.0.1)
> > when I debug vtk with vs2005 after some hours,It show me a box
> that ask
> > me for executable file name for debug session.I don`t know which .exe
> > file and from where I must loaded?
> >
> > and in debuging ITK , show me the error box .(345 error show in
> output
> > box),the first error that be shown is:
> > E:\somin\setup
> >
> file\ITK\InsightToolkit-3.0.1\InsightToolkit-3.0.1\Utilities\vxl\vcl\vcl_complex.h
> (66)
> > : fatal error C1017: invalid integer constant expression
> >
> > and another error is:
> >
> > Project : error PRJ0002 : Error result -1073741819 returned from
> > 'D:\Program Files\Microsoft Visual Studio 8\VC\bin\cl.exe'.
> >
> > the build log file to be attached.(please see it)
> >
> > please tell me for solving these problems.
> >
> > thanks.
> >
> >
> >
> > On 8/18/07, *Luis Ibanez* < luis.ibanez at kitware.com
> <mailto:luis.ibanez at kitware.com>
> > <mailto:luis.ibanez at kitware.com
> <mailto:luis.ibanez at kitware.com>>> wrote:
> >
> >
> > Hi Somayeh,
> >
> >
> > Welcome to IGSTK !
> >
> >
> > Yes, you need to build ITK and VTK before
> > you attempt building IGSTK.
> >
> > All of these toolkits should first be
> > configured with CMake.
> >
> > As GUI library you can use FLTK or QT.
> >
> >
> > Please read the instructions in the IGSTK book:
> >
> > http://www.igstk.org/papers/IGSTKTheBook.pdf
> >
> >
> > You will also find build instructions in the
> > IGSTK Wiki page:
> >
> >
> http://public.kitware.com/IGSTKWIKI/index.php/How_to_build_IGSTK
> <http://public.kitware.com/IGSTKWIKI/index.php/How_to_build_IGSTK>
> >
> <http://public.kitware.com/IGSTKWIKI/index.php/How_to_build_IGSTK>
> >
> >
> > Please let us know if you find any problems
> > while building IGSTK.
> >
> >
> > Thanks
> >
> >
> > Luis
> >
> >
> > ========================
> > somayeh khademi wrote:
> > > Hello,
> > >
> > > I`m new in use IGSTK, please tell me for use IGSTK ,
> > > Is It nessecery *building* ITK,VTK, and FLTK after
> configure them
> > with
> > > CMAKE ?or It is enough building the application , after
> configure ?
> > >
> > >
> > >
> > >
> >
More information about the IGSTK-Users
mailing list