[ITK] [ITK-dev] [slicer-devel] build error in simpleitk
Isaiah Norton
isaiah.norton at gmail.com
Wed Jan 13 18:47:32 EST 2016
(cc: insight-devel)
We are also seeing this issue, and several SimpleITK dashboards are failing
with the same error for the OS X 10.9 (since bumping to ITK 4.9) and 10.10
(since yesterday) dashboards:
https://open.cdash.org/buildSummary.php?buildid=4188623
It looks like this is essentially caused by SimpleITK being compiled with
`-std=c++11`, whereas ITK (and VXL) are not. So, there is a mismatch
between the configured definition of `VCL_CONSTEXPR` and the `
VCL_STATIC_CONST_INIT_*` macros.
For reference, VCL_CONSTEXPR was introduced here:
http://review.source.kitware.com/#/c/20386/
A proposed patch [1] is attached.
Best,
Isaiah
[1]
https://github.com/ihnorton/ITK/commit/0f748d8c86ffb2369c3a343c0db5ca87b067843e
On Mon, Jan 11, 2016 at 11:21 AM, Steve Pieper <pieper at isomics.com> wrote:
> Hi -
>
> This morning with Xcode 7.2 on mac 10.11.2 I get the build errors pasted
> below. This was in a fresh build directory. With SimpleITK turned off the
> build completes and everything works as expected.
>
> I found an old issue with similar errors [1] but nothing lately.
>
> -Steve
>
> [1] https://issues.itk.org/jira/browse/ITK-2976
>
>
>
>
> In file included from
> /Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_c_vector.h:26:
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:388:41:
> **error: **declaration of constexpr static data member*
>
> * 'zero' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR float zero
> VCL_STATIC_CONST_INIT_FLOAT_DECL(0.0F);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:390:41:
> **error: **declaration of constexpr static data member*
>
> * 'one' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR float one
> VCL_STATIC_CONST_INIT_FLOAT_DECL(1.0F);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:392:41:
> **error: **declaration of constexpr static data member*
>
> * 'maxval' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR float maxval
> VCL_STATIC_CONST_INIT_FLOAT_DECL(3.40282346638528860e+38F);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:411:42:
> **error: **declaration of constexpr static data member*
>
> * 'zero' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR double zero
> VCL_STATIC_CONST_INIT_FLOAT_DECL(0.0);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:413:42:
> **error: **declaration of constexpr static data member*
>
> * 'one' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR double one
> VCL_STATIC_CONST_INIT_FLOAT_DECL(1.0);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:415:42:
> **error: **declaration of constexpr static data member*
>
> * 'maxval' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR double maxval
> VCL_STATIC_CONST_INIT_FLOAT_DECL(1.7976931348623157E+308);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:434:47:
> **error: **declaration of constexpr static data member*
>
> * 'zero' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR long double zero
> VCL_STATIC_CONST_INIT_FLOAT_DECL(0.0);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:436:47:
> **error: **declaration of constexpr static data member*
>
> * 'one' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR long double one
> VCL_STATIC_CONST_INIT_FLOAT_DECL(1.0);
>
> * ^*
>
> */Users/pieper/slicer4/latest/Slicer-superbuild/ITKv4/Modules/ThirdParty/VNL/src/vxl/core/vnl/vnl_numeric_traits.h:438:47:
> **error: **declaration of constexpr static data member*
>
> * 'maxval' requires an initializer*
>
> static VNL_EXPORT VCL_CONSTEXPR long double maxval
> VCL_STATIC_CONST_INIT_FLOAT_DECL(1.7976931348623157E+308);
>
> * ^*
>
> 9 errors generated.
>
> make[8]: ***
> [Code/Explicit/src/CMakeFiles/SimpleITKExplicit.dir/sitkExplicitITKComposeImageFilter.cxx.o]
> Error 1
>
> make[7]: *** [Code/Explicit/src/CMakeFiles/SimpleITKExplicit.dir/all]
> Error 2
>
> make[6]: *** [all] Error 2
>
> make[5]: *** [SimpleITK-prefix/src/SimpleITK-stamp/SimpleITK-build] Error 2
>
> make[4]: *** [CMakeFiles/SimpleITK.dir/all] Error 2
>
> make[3]: *** [all] Error 2
>
> make[2]: *** [SimpleITK-prefix/src/SimpleITK-stamp/SimpleITK-build] Error 2
>
> make[1]: *** [CMakeFiles/SimpleITK.dir/all] Error 2
>
> make: *** [all] Error 2
>
> _______________________________________________
> slicer-devel mailing list
> slicer-devel at bwh.harvard.edu
> http://massmail.spl.harvard.edu/mailman/listinfo/slicer-devel
> To unsubscribe: send email to slicer-devel-request at bwh.harvard.edu with
> unsubscribe as the subject
>
> http://www.slicer.org/slicerWiki/index.php/Documentation/Nightly/Developers/FAQ
>
>
> The information in this e-mail is intended only for the person to whom it
> is
> addressed. If you believe this e-mail was sent to you in error and the
> e-mail
> contains patient information, please contact the Partners Compliance
> HelpLine at
> http://www.partners.org/complianceline . If the e-mail was sent to you in
> error
> but does not contain patient information, please contact the sender and
> properly
> dispose of the e-mail.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/community/attachments/20160113/8ef7b0e5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-COMP-fix-build-with-std-c-11-when-ITK-VXL-initially-.patch
Type: application/octet-stream
Size: 3416 bytes
Desc: not available
URL: <http://public.kitware.com/pipermail/community/attachments/20160113/8ef7b0e5/attachment-0001.obj>
-------------- next part --------------
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Kitware offers ITK Training Courses, for more information visit:
http://kitware.com/products/protraining.php
Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/insight-developers
More information about the Community
mailing list