[ITK] [ITK-users] EuclideanDistancePointMetric: Error when comparing Mesh to QuadEdgeMesh
Davis Vigneault
davis.vigneault at gmail.com
Thu May 21 05:43:22 EDT 2015
Thanks very much for the reply, Arnaud! Yes, I had originally begin with
the v4 version, but ran into trouble when I tried to use it with
LevenbergMarquardtOptimizer.
EuclideanDistancePointMetric inherits from MultipleValuedCostFunction,
wherease EuclideanDistancePointSetToPointSetMetricv4 inherits from
SingleValuedCostFunctionv4. To the best that I can tell,
LevenbergMarquardtOptimizer expects its cost function to inherit from
MultipleValuedCostFunction. I tried wrapping
EuclideanDistancePointSetToPointSetMetricv4 in an adapter class inheriting
from MultipleValuedCostFunction, where I returned 1 from
GetNumberOfValues() and wrapped the return of GetValue() in an itk::Array
length 1. However, when I did this, I got a warning saying (if I remember
correctly) that there was a mismatch between the number of unknowns and
residuals. I realized that wrapping a "new" cost function class in an
"old" cost function class was a hacky way to go about it in the first
place, so I abandoned this method a while ago.
Is there a way to use the v4 version with LevenbergMarquardtOptimizer? Is
there a reason that the v3 EuclideanDistanceMetric is multiple valued,
whereas the v4 metric is single valued? Is a v4 LevenbergOptimizer in
development, and will it be single valued or multiple valued?
Apologies in advance if I've been going about this the wrong way--I've been
using ITK for a while, but am only just beginning to learn about
optimization/registration.
On Thu, May 21, 2015 at 7:55 AM, Arnaud Gelas <arnaudgelas at gmail.com> wrote:
> Hi Davis,
>
> If you use the ITKv4 version of Metric, it compiles and works fine!
>
> —
>
> Here is the code
>
> #include "itkQuadEdgeMesh.h"
> #include "itkRegularSphereMeshSource.h"
> #include "itkEuclideanDistancePointSetToPointSetMetricv4.h"
> #include "itkIdentityTransform.h"
>
> typedef itk::Mesh< double, 3 > TFMesh; // If you change this to
> itk::QuadEdgeMesh, it works
> typedef itk::QuadEdgeMesh< double, 3 > TMMesh; // Or if you change this to
> itk::Mesh, it also works
> typedef itk::RegularSphereMeshSource< TFMesh > TFSource;
> typedef itk::RegularSphereMeshSource< TMMesh > TMSource;
> typedef itk::EuclideanDistancePointSetToPointSetMetricv4< TFMesh, TMMesh >
> TMetric;
> typedef itk::IdentityTransform< double, 3 > TIdentity;
>
> int main(int argc, char ** argv)
> {
>
> TFSource::Pointer fixed = TFSource::New();
> fixed->Update();
>
> TMSource::Pointer moving = TMSource::New();
> moving->Update();
>
> TIdentity::Pointer identity = TIdentity::New();
>
> TMetric::Pointer metric = TMetric::New();
> metric->SetFixedPointSet( fixed->GetOutput() );
> metric->SetMovingPointSet( moving->GetOutput() );
> metric->SetTransform( identity );
> std::cout << metric->GetValue() << std::endl;
>
> return EXIT_SUCCESS;
>
> }
>
>
> > On 20 May 2015, at 18:04, DVigneault <davis.vigneault at gmail.com> wrote:
> >
> > All--
> >
> > I'm attempting to use itk::EuclideanDistancePointMetric to compare an
> > itk::Mesh to an itk::QuadEdgeMesh. This works as expected if templated
> over
> > two meshes of the same type (i.e., itk::Mesh and itk::Mesh or
> > itk::QuadEdgeMesh and itk::QuadEdgeMesh). However, if I attempt to mix
> the
> > two, and compare an itk::Mesh and an itk::QuadEdgeMesh, I get a build
> error,
> > copied below, along with a minimal example of the problem.
> >
> > I'm having some trouble decoding the error, but it looks to me as though
> the
> > filter is having trouble converting between iterator types. Does this
> have
> > something to do with a difference between how itk::Mesh and
> > itk::QuadEdgeMesh define their iterators?
> >
> > Thank you in advance for your help!
> >
> > Best,
> >
> > --Davis
> >
> > #include "itkQuadEdgeMesh.h"
> > #include "itkRegularSphereMeshSource.h"
> > #include "itkEuclideanDistancePointMetric.h"
> > #include "itkIdentityTransform.h"
> >
> > typedef itk::Mesh< double, 3 > TFMesh; // If you change this to
> > itk::QuadEdgeMesh, it works
> > typedef itk::QuadEdgeMesh< double, 3 > TMMesh; // Or if you change this
> to
> > itk::Mesh, it also works
> > typedef itk::RegularSphereMeshSource< TFMesh > TFSource;
> > typedef itk::RegularSphereMeshSource< TMMesh > TMSource;
> > typedef itk::EuclideanDistancePointMetric< TFMesh, TMMesh > TMetric;
> > typedef itk::IdentityTransform< double, 3 > TIdentity;
> >
> > int main(int argc, char ** argv)
> > {
> >
> > TFSource::Pointer fixed = TFSource::New();
> > fixed->Update();
> >
> > TMSource::Pointer moving = TMSource::New();
> > moving->Update();
> >
> > TIdentity::Pointer identity = TIdentity::New();
> >
> > TMetric::Pointer metric = TMetric::New();
> > metric->SetFixedPointSet( fixed->GetOutput() );
> > metric->SetMovingPointSet( moving->GetOutput() );
> > metric->SetTransform( identity );
> > std::cout << metric->GetValue(identity->GetParameters()) << std::endl;
> >
> > return EXIT_SUCCESS;
> >
> > }
> >
> >
> > $ make
> > Scanning dependencies of target AmoebaOptimization
> > [100%] Building CXX object
> > CMakeFiles/AmoebaOptimization.dir/AmoebaOptimization.cxx.o
> > In file included from
> > /usr/local/include/ITK-4.7/itkEuclideanDistancePointMetric.h:125:0,
> > from
> >
> /home/davis/Developer/oxford/Stebbing_Method/Test/src/AmoebaOptimization.cxx:3:
> > /usr/local/include/ITK-4.7/itkEuclideanDistancePointMetric.hxx: In
> > instantiation of ‘itk::EuclideanDistancePointMetric<TFixedPointSet,
> > TMovingPointSet, TDistanceMap>::MeasureType
> > itk::EuclideanDistancePointMetric<TFixedPointSet, TMovingPointSet,
> > TDistanceMap>::GetValue(const TransformParametersType&) const [with
> > TFixedPointSet = itk::Mesh<double, 3u>; TMovingPointSet =
> > itk::QuadEdgeMesh<double, 3u>; TDistanceMap = itk::Image<short unsigned
> int,
> > 3u>; itk::EuclideanDistancePointMetric<TFixedPointSet, TMovingPointSet,
> > TDistanceMap>::MeasureType = itk::Array<double>;
> > itk::EuclideanDistancePointMetric<TFixedPointSet, TMovingPointSet,
> > TDistanceMap>::TransformParametersType =
> itk::OptimizerParameters<double>]’:
> >
> /home/davis/Developer/oxford/Stebbing_Method/Test/src/AmoebaOptimization.cxx:28:58:
> > required from here
> > /usr/local/include/ITK-4.7/itkEuclideanDistancePointMetric.hxx:74:63:
> error:
> > conversion from ‘itk::MapContainer<long unsigned int,
> > itk::QuadEdgeMeshPoint<float, 3u, itk::GeometricalQuadEdge<long
> > unsigned int, long unsigned int, bool, bool, true> > >::ConstIterator’ to
> > non-scalar type ‘itk::EuclideanDistancePointMetric<itk::Mesh<double,
> 3u>,
> > itk::QuadEdgeMesh<double, 3u> >::PointIterator {aka
> > itk::VectorContainer<long unsigned int, itk::Point<float, 3u>
> >> ::ConstIterator}’ requested
> > PointIterator pointItr = movingPointSet->GetPoints()->Begin();
> > ^
> > /usr/local/include/ITK-4.7/itkEuclideanDistancePointMetric.hxx:75:61:
> error:
> > conversion from ‘itk::MapContainer<long unsigned int,
> > itk::QuadEdgeMeshPoint<float, 3u, itk::GeometricalQuadEdge<long
> > unsigned int, long unsigned int, bool, bool, true> > >::ConstIterator’ to
> > non-scalar type ‘itk::EuclideanDistancePointMetric<itk::Mesh<double,
> 3u>,
> > itk::QuadEdgeMesh<double, 3u> >::PointIterator {aka
> > itk::VectorContainer<long unsigned int, itk::Point<float, 3u>
> >> ::ConstIterator}’ requested
> > PointIterator pointEnd = movingPointSet->GetPoints()->End();
> > ^
> > make[2]: *** [CMakeFiles/AmoebaOptimization.dir/AmoebaOptimization.cxx.o]
> > Error 1
> > make[1]: *** [CMakeFiles/AmoebaOptimization.dir/all] Error 2
> > make: *** [all] Error 2
> >
> >
> >
> >
> > --
> > View this message in context:
> http://itk-insight-users.2283740.n2.nabble.com/EuclideanDistancePointMetric-Error-when-comparing-Mesh-to-QuadEdgeMesh-tp7587372.html
> > Sent from the ITK Insight Users mailing list archive at Nabble.com.
> > _____________________________________
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> >
> > Kitware offers ITK Training Courses, for more information visit:
> > http://www.kitware.com/products/protraining.php
> >
> > Please keep messages on-topic and check the ITK FAQ at:
> > http://www.itk.org/Wiki/ITK_FAQ
> >
> > Follow this link to subscribe/unsubscribe:
> > http://public.kitware.com/mailman/listinfo/insight-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/community/attachments/20150521/edd8bf09/attachment.html>
-------------- next part --------------
_____________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Kitware offers ITK Training Courses, for more information visit:
http://www.kitware.com/products/protraining.php
Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/insight-users
More information about the Community
mailing list