[ITK] [ITK-dev] Compile errors in wiki and sphinx examples after recent changes

Tue Jul 7 09:34:09 EDT 2015

Bill,

After several T-Con discussions and e-mails, it was determined that there was no way to preserve backwards and forwards compatibility for fixing this bug.

Here is the solution that is inplace for ANTs and Slicer (NOTE BRAINSTools, DTIPrep, DTIProcess, DTIReg, UKFTractography, SimpleITK, and many other tools needed no modifications).

#if defined(ITK_FIXED_PARAMETERS_ARE_DOUBLE) // After 4.8.1
  typename BSplineTransformType::FixedParametersValueType transformFixedParamsItk;
#else                                         //Pre 4.8.1
   typename BSplineTransformType::ParametersType transformFixedParamsItk;
#endif

Hans

========================================================================
Hans J. Johnson, Ph.D.,  Associate Professor
Electrical and Computer Engineering (Primary), Biomedical Engineering, Psychiatry
hans-johnson at uiowa.edu<mailto:hans-johnson at uiowa.edu>
(319) 621 7185 (cell)
(319) 384 3538  ECE Phone (Primary)
(319) 353 8587 Psychiatry Phone (Secondary)

4316 Seamans Center
Iowa City, IA 52242

On Jul 7, 2015, at 7:48 AM, Bill Lorensen <bill.lorensen at gmail.com<mailto:bill.lorensen at gmail.com>> wrote:

Hans,

There is a problem with the change. My code will no longer build with
older versions of ITK.
I get:

ITKWikiExamplesNightly/Utilities/FileOutputWindow.cxx:23: error:
'FixedParametersType' is not a member of 'main(int,
char**)::TransformType'

This is not good, unless I'm noising something...

On Mon, Jul 6, 2015 at 4:23 PM, Bill Lorensen <bill.lorensen at gmail.com<mailto:bill.lorensen at gmail.com>> wrote:
Hans,

That was the problem. Just a surprise  for me.

Bill

On Mon, Jul 6, 2015 at 8:46 AM, Johnson, Hans J <hans-johnson at uiowa.edu<mailto:hans-johnson at uiowa.edu>> wrote:
Bill,

The problem is almost certainly that the variable “parameters” is of type
“ParametersType” rather than “FixedParametersType”.

// The ITK_FIXED_PARAMETERS_ARE_DOUBLE is intended
// to facilitate transition of ITK for those very
// rare cases where multiple versions of ITK
// may need to be supported simultaneously.
#if defined( ITK_LEGACY_REMOVE )
 #undef  ITK_FIXED_PARAMETERS_ARE_DOUBLE
#else
 #define ITK_FIXED_PARAMETERS_ARE_DOUBLE
 // #if !defined(ITK_FIXED_PARAMETERS_ARE_DOUBLE)
 // typedef ParametersValueType FixedParametersValueType;
 // #endif
#endif

Hans

On Jul 6, 2015, at 6:52 AM, Bill Lorensen <bill.lorensen at gmail.com<mailto:bill.lorensen at gmail.com>> wrote:

Folks,

Something in this commit

https://open.cdash.org/viewChanges.php?project=Insight&date=2015-07-04

is causing these errors:

https://open.cdash.org/viewBuildError.php?onlydeltap&buildid=3887517

and

https://open.cdash.org/viewBuildError.php?onlydeltap&buildid=3887806

Bill
--
Unpaid intern in BillsBasement at noware dot com
_______________________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Kitware offers ITK Training Courses, for more information visit:
http://kitware.com/products/protraining.php

Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/insight-developers

________________________________
Notice: This UI Health Care e-mail (including attachments) is covered by the
Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential
and may be legally privileged.  If you are not the intended recipient, you
are hereby notified that any retention, dissemination, distribution, or
copying of this communication is strictly prohibited.  Please reply to the
sender that you have received the message in error, then delete it.  Thank
you.
________________________________

--
Unpaid intern in BillsBasement at noware dot com

--
Unpaid intern in BillsBasement at noware dot com

________________________________
Notice: This UI Health Care e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be legally privileged.  If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited.  Please reply to the sender that you have received the message in error, then delete it.  Thank you.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/community/attachments/20150707/d2df82bc/attachment-0001.html>
-------------- next part --------------
_______________________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Kitware offers ITK Training Courses, for more information visit:
http://kitware.com/products/protraining.php

Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/insight-developers