[ITK] Error when trying to run the read image example

Fri May 2 11:28:23 EDT 2014

I have tried setting up ITK (latest version) again, and this time it worked
:-)

I don't really know why the issues I had before.

Thanks all for your kind support.

On Sun, Apr 27, 2014 at 11:37 PM, Med SWEng <medcompsweng at gmail.com> wrote:

> No, it doesn't exist.
>
> But, maybe I had to build ITK in release mode while setup as suggested
> here? http://www.itk.org/pipermail/insight-users/2005-December/015975.html
>
> I will try that and update you soon.
>
>
> On Sun, Apr 27, 2014 at 11:36 PM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>
>>  Does that file exist?
>>  ------------------------------
>> *From:* Med SWEng [medcompsweng at gmail.com]
>> *Sent:* Monday, 28 April 2014 9:34 a.m.
>> *To:* Gib Bogle; community at itk.org
>>
>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>
>>   I have tried installing ITK 4.0.0. I managed to install and build it.
>> Now, returning back to the "read image" example in the ITK software guide,
>> I get the following when trying to build the project in Visual Studio:
>>
>> LINK : fatal error LNK1181: cannot open input file
>> 'C:\ITK\Build\lib\Release\ITKCommon-4.0.lib'
>>
>>  Why is that?
>>
>> Thanks.
>>
>>
>> On Sat, Apr 26, 2014 at 7:56 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>
>>>  I think what you mean is you are unable to build the release
>>> executable.  I have no idea why this should be, but I'm sure it's not a VS
>>> issue.  It could be a problem with your ITK build.  You'll need to seek
>>> help from the ITK gurus - I am not one.
>>>  ------------------------------
>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>> *Sent:* Saturday, 26 April 2014 5:19 p.m.
>>>
>>> *To:* Gib Bogle
>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>
>>>    Since I'm not able to run the program in release mode, that
>>> subdirectory is empty. Really getting stuck here.
>>>
>>>  Isn't there a way to create a .exe outside VS?
>>>
>>>
>>> On Sat, Apr 26, 2014 at 7:13 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>
>>>>  The exe file will be in the release subdirectory of the directory
>>>> where the project files are, i.e. image2.vcxproj etc.  If you can locate
>>>> it, try executing it from the command line.
>>>>
>>>> What really puzzles me is that I do not have that library, but can run
>>>> the program.  I am using ITK-4.0.0, but that should not make any difference.
>>>>  ------------------------------
>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>> *Sent:* Saturday, 26 April 2014 4:59 p.m.
>>>>
>>>> *To:* Gib Bogle
>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>
>>>>    Yes, I'm still getting that error if I want to use the release
>>>> version. This is why it seems I don't have the .exe file.
>>>>
>>>>
>>>> On Sat, Apr 26, 2014 at 6:58 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>
>>>>>  I don't understand that error, since I cannot locate that .lib file
>>>>> anywhere on my system, and I can execute the release version of image2.exe
>>>>> successfully.  Are you still getting that error with the release version?
>>>>>  ------------------------------
>>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>>> *Sent:* Saturday, 26 April 2014 4:43 p.m.
>>>>> *To:* Gib Bogle
>>>>>
>>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>>
>>>>>    Yes, you are right, when running the program using VS, I had a
>>>>> problem since the image is not given as input. Sorry I'm new to that, I
>>>>> couldn't find the .exe file, although I used CMake.
>>>>>
>>>>>  My original issue was when I tried to run the program in VS in
>>>>> "release" mode, I got the original error I mentioned in my message, and
>>>>> when used the "debug" mode by passed that, since that file was there.
>>>>>
>>>>>
>>>>> On Sat, Apr 26, 2014 at 6:38 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>>
>>>>>>  I presume you are using Visual Studio, since that's the message you
>>>>>> get when you try to execute the program within VS.  Open a command prompt
>>>>>> console in the directory where image2.exe was created, and type:
>>>>>>
>>>>>> image2 your_image_file
>>>>>>
>>>>>> You can invoke the program from VS by selecting it as the Startup
>>>>>> project, as you have discovered, but the program expects to read an image
>>>>>> file, the name of which was supplied on the command line.
>>>>>>
>>>>>> By the way I don't understand your original question, about
>>>>>> itkdouble-conversion.4.5.lib not being found.  Which example did that error
>>>>>> occur with?
>>>>>>  ------------------------------
>>>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>>>> *Sent:* Saturday, 26 April 2014 4:00 p.m.
>>>>>>
>>>>>> *To:* Gib Bogle
>>>>>> *Cc:* community at itk.org
>>>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>>>
>>>>>>     The example is: Examples/DataRepresentation/Image/Image2.cxx.
>>>>>>
>>>>>>  When I ran the program in "Debug" mode, it passed that error, but
>>>>>> got the message box:
>>>>>>
>>>>>>  Unable to start program 'C:\Users\....\bin\Debug\ALL_BUILD
>>>>>>
>>>>>>
>>>>>>  The system cannot find the file specified
>>>>>>
>>>>>>
>>>>>> On Sat, Apr 26, 2014 at 2:06 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>>>
>>>>>>>  Which example is that - what is the name of the .cxx file?
>>>>>>>  ------------------------------
>>>>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>>>>> *Sent:* Saturday, 26 April 2014 11:24 a.m.
>>>>>>> *To:* Gib Bogle
>>>>>>> *Cc:* community at itk.org
>>>>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>>>>
>>>>>>>    Thanks Gib for your reply. It seems it doesn't exist. How can I
>>>>>>> fix such issue?
>>>>>>>
>>>>>>>
>>>>>>> On Sat, Apr 26, 2014 at 1:22 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>>>>
>>>>>>>>  Does that file exist?
>>>>>>>>  ------------------------------
>>>>>>>> *From:* Community [community-bounces at itk.org] on behalf of Med
>>>>>>>> SWEng [medcompsweng at gmail.com]
>>>>>>>> *Sent:* Saturday, 26 April 2014 11:21 a.m.
>>>>>>>> *To:* community at itk.org
>>>>>>>> *Subject:* [ITK] Error when trying to run the read image example
>>>>>>>>
>>>>>>>>     When I tried running the "read image" example of the "itk
>>>>>>>> software guide", I got the following error:
>>>>>>>>
>>>>>>>> 2>LINK : fatal error LNK1181: cannot open input file
>>>>>>>> 'C:\Toolkits\itk-4.5.2\bin\lib\Release\itkdouble-conversion-4.5.lib'
>>>>>>>> 3>------ Skipped Build: Project: ALL_BUILD, Configuration: Release
>>>>>>>> Win32 ------
>>>>>>>>
>>>>>>>>  What should I do to fix this issue?
>>>>>>>>
>>>>>>>>  Thanks.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/community/attachments/20140502/6944e7dc/attachment-0001.html>