[ITK] Error when trying to run the read image example

Sun Apr 27 17:37:51 EDT 2014

No, it doesn't exist.

But, maybe I had to build ITK in release mode while setup as suggested
here? http://www.itk.org/pipermail/insight-users/2005-December/015975.html

I will try that and update you soon.

On Sun, Apr 27, 2014 at 11:36 PM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:

>  Does that file exist?
>  ------------------------------
> *From:* Med SWEng [medcompsweng at gmail.com]
> *Sent:* Monday, 28 April 2014 9:34 a.m.
> *To:* Gib Bogle; community at itk.org
>
> *Subject:* Re: [ITK] Error when trying to run the read image example
>
>   I have tried installing ITK 4.0.0. I managed to install and build it.
> Now, returning back to the "read image" example in the ITK software guide,
> I get the following when trying to build the project in Visual Studio:
>
> LINK : fatal error LNK1181: cannot open input file
> 'C:\ITK\Build\lib\Release\ITKCommon-4.0.lib'
>
>  Why is that?
>
> Thanks.
>
>
> On Sat, Apr 26, 2014 at 7:56 AM, Gib Bogle <g.bogle at auckland.ac.nz> wrote:
>
>>  I think what you mean is you are unable to build the release
>> executable.  I have no idea why this should be, but I'm sure it's not a VS
>> issue.  It could be a problem with your ITK build.  You'll need to seek
>> help from the ITK gurus - I am not one.
>>  ------------------------------
>> *From:* Med SWEng [medcompsweng at gmail.com]
>> *Sent:* Saturday, 26 April 2014 5:19 p.m.
>>
>> *To:* Gib Bogle
>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>
>>    Since I'm not able to run the program in release mode, that
>> subdirectory is empty. Really getting stuck here.
>>
>>  Isn't there a way to create a .exe outside VS?
>>
>>
>> On Sat, Apr 26, 2014 at 7:13 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>
>>>  The exe file will be in the release subdirectory of the directory
>>> where the project files are, i.e. image2.vcxproj etc.  If you can locate
>>> it, try executing it from the command line.
>>>
>>> What really puzzles me is that I do not have that library, but can run
>>> the program.  I am using ITK-4.0.0, but that should not make any difference.
>>>  ------------------------------
>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>> *Sent:* Saturday, 26 April 2014 4:59 p.m.
>>>
>>> *To:* Gib Bogle
>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>
>>>    Yes, I'm still getting that error if I want to use the release
>>> version. This is why it seems I don't have the .exe file.
>>>
>>>
>>> On Sat, Apr 26, 2014 at 6:58 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>
>>>>  I don't understand that error, since I cannot locate that .lib file
>>>> anywhere on my system, and I can execute the release version of image2.exe
>>>> successfully.  Are you still getting that error with the release version?
>>>>  ------------------------------
>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>> *Sent:* Saturday, 26 April 2014 4:43 p.m.
>>>> *To:* Gib Bogle
>>>>
>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>
>>>>    Yes, you are right, when running the program using VS, I had a
>>>> problem since the image is not given as input. Sorry I'm new to that, I
>>>> couldn't find the .exe file, although I used CMake.
>>>>
>>>>  My original issue was when I tried to run the program in VS in
>>>> "release" mode, I got the original error I mentioned in my message, and
>>>> when used the "debug" mode by passed that, since that file was there.
>>>>
>>>>
>>>> On Sat, Apr 26, 2014 at 6:38 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>
>>>>>  I presume you are using Visual Studio, since that's the message you
>>>>> get when you try to execute the program within VS.  Open a command prompt
>>>>> console in the directory where image2.exe was created, and type:
>>>>>
>>>>> image2 your_image_file
>>>>>
>>>>> You can invoke the program from VS by selecting it as the Startup
>>>>> project, as you have discovered, but the program expects to read an image
>>>>> file, the name of which was supplied on the command line.
>>>>>
>>>>> By the way I don't understand your original question, about
>>>>> itkdouble-conversion.4.5.lib not being found.  Which example did that error
>>>>> occur with?
>>>>>  ------------------------------
>>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>>> *Sent:* Saturday, 26 April 2014 4:00 p.m.
>>>>>
>>>>> *To:* Gib Bogle
>>>>> *Cc:* community at itk.org
>>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>>
>>>>>     The example is: Examples/DataRepresentation/Image/Image2.cxx.
>>>>>
>>>>>  When I ran the program in "Debug" mode, it passed that error, but got
>>>>> the message box:
>>>>>
>>>>>  Unable to start program 'C:\Users\....\bin\Debug\ALL_BUILD
>>>>>
>>>>>
>>>>>  The system cannot find the file specified
>>>>>
>>>>>
>>>>> On Sat, Apr 26, 2014 at 2:06 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>>
>>>>>>  Which example is that - what is the name of the .cxx file?
>>>>>>  ------------------------------
>>>>>> *From:* Med SWEng [medcompsweng at gmail.com]
>>>>>> *Sent:* Saturday, 26 April 2014 11:24 a.m.
>>>>>> *To:* Gib Bogle
>>>>>> *Cc:* community at itk.org
>>>>>> *Subject:* Re: [ITK] Error when trying to run the read image example
>>>>>>
>>>>>>    Thanks Gib for your reply. It seems it doesn't exist. How can I
>>>>>> fix such issue?
>>>>>>
>>>>>>
>>>>>> On Sat, Apr 26, 2014 at 1:22 AM, Gib Bogle <g.bogle at auckland.ac.nz>wrote:
>>>>>>
>>>>>>>  Does that file exist?
>>>>>>>  ------------------------------
>>>>>>> *From:* Community [community-bounces at itk.org] on behalf of Med
>>>>>>> SWEng [medcompsweng at gmail.com]
>>>>>>> *Sent:* Saturday, 26 April 2014 11:21 a.m.
>>>>>>> *To:* community at itk.org
>>>>>>> *Subject:* [ITK] Error when trying to run the read image example
>>>>>>>
>>>>>>>     When I tried running the "read image" example of the "itk
>>>>>>> software guide", I got the following error:
>>>>>>>
>>>>>>> 2>LINK : fatal error LNK1181: cannot open input file
>>>>>>> 'C:\Toolkits\itk-4.5.2\bin\lib\Release\itkdouble-conversion-4.5.lib'
>>>>>>> 3>------ Skipped Build: Project: ALL_BUILD, Configuration: Release
>>>>>>> Win32 ------
>>>>>>>
>>>>>>>  What should I do to fix this issue?
>>>>>>>
>>>>>>>  Thanks.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/community/attachments/20140427/2edc51f4/attachment-0002.html>