Release Testing: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
(Created page with "This page contains instructions on how to test ParaView before a release. We focus on real use cases, as opposed to small toy tests for the dashboard. =Test setup= * Either Lin...")
 
No edit summary
Line 2: Line 2:


=Test setup=
=Test setup=
* Either Linux or Windows client.
*Either Linux or Windows client.
* Remote server, at least 8 pvservers.
*Remote server, at least 8 pvservers.
* Server uses Mesa.
*Server uses Mesa.


=Exodus testing=
=Exodus testing=
* Open 32 file Whipple Shield.  All variables on.  Apply.
*Open 32 file Whipple Shield.  All variables on.  Apply.
* Cell Data to Point Data.  Apply.
*Cell Data to Point Data.  Apply.
* Clip/ Scalar/ VOLFRAC2 / 0.5/ Apply.
*Clip/ Scalar/ VOLFRAC2 / 0.5/ Apply.
* Clip/ Y Normal/ Inside Out/ Show Plane off/ Apply.
*Clip/ Y Normal/ Inside Out/ Show Plane off/ Apply.
* Pipeline browser, select CellDataToPointData.
*Pipeline browser, select CellDataToPointData.
* Contour/ VOLFRAC1/ 0.1/ Apply.
*Contour/ VOLFRAC1/ 0.1/ Apply.
* Color by pressure.
*Color by pressure.
* Color legend on.  Move to bottom, then left, then top, then right side.  Make sure all numbers show up.
*Color legend on.  Move to bottom, then left, then top, then right side.  Make sure all numbers show up.
* Sources/ Text.  Use "1234567890", " 1234567890", "iii", " iii", " Harry Potter."  Move this text to other places.  Make sure all parts of the text show up.
*Sources/ Text.  Use "1234567890", " 1234567890", "iii", " iii", " Harry Potter."  Move this text to other places.  Make sure all parts of the text show up. (numerous bugs here)
* Sources/ Annotate time filter.  Apply.  Move this text up about an inch.
*Sources/ Annotate time filter.  Apply.  Move this text up about an inch.
* Filters/ Alphabetical/ Annotate time filter.  Apply.
*Filters/ Alphabetical/ Annotate time filter.  Apply.
* Set time step to 40.
*Set time step to 40.
* Rescale to Data Range.
*Rescale to Data Range.
* Set time to first frame (using Icon).
*Set time to first frame (using Icon).
* Rubber band select some area to zoom to.
*Rubber band select some area to zoom to.
* Reset.
*Reset.
* +X/ -X/ +Y/ -Y/ +Z/ -Z/ -Y
*+X/ -X/ +Y/ -Y/ +Z/ -Z/ -Y
* Turn Orientation Axis off, then back on.
*Turn Orientation Axis off, then back on.
* Turn show center off, then back on.
*Turn show center off, then back on.
* Reset center (the icon next to show center).
*Reset center (the icon next to show center).
* Rotate object, make sure it rotates around center.
*Rotate object, make sure it rotates around center.
* Pick center on edge of object, make sure it rotates around center.
*Pick center on edge of object, make sure it rotates around center.
* Reset, -Y
*Reset, -Y
* Last time frame, first timeframe, next frame (5 times), previous frame, play.
*Last time frame, first timeframe, next frame (5 times), previous frame, play.
* Pipeline browser, select last Clip.
*Pipeline browser, select last Clip.
* Outline, points, surface with edges, wireframe.
*Outline, points, surface with edges, wireframe.
* Display tab - change opacity to 0.1. Change back to 1.0.
*Display tab - change opacity to 0.1. Change back to 1.0.
* Display tab - show cube axis.
*Display tab - show cube axis. (bug here)
* Volume
*Volume
* Surface, change color to Solid Color.
*Surface, change color to Solid Color.
* Change pipeline browser to Contour.
*Change pipeline browser to Contour.
* Color editor.
*Color editor.
** Choose Preset - run through all of the presets.
**Choose Preset - run through all of the presets.
** Log scale on.  Notice the color scale.  Log scale off.
**Log scale on.  Notice the color scale.  Log scale off. (bug here)
** Click "Rescale to Temporal Range".
**Click "Rescale to Temporal Range".
** Turn off Automatically Rescale to Fit Data Range.
**Turn off Automatically Rescale to Fit Data Range.
** Rescale range - change Min to 0, Max to 2.0e+10
**Rescale range - change Min to 0, Max to 2.0e+10
* Play
*Play
* Back to first frame.
*Back to first frame.
*Pipeline browser, choose last clip.
**Plot Over Line filter.
**Select upper right part of plate, P, then lower left of sphere.  Apply.  (bug here)
**(May need to highlight the 2d viewport
**Display tab, toggle all variables on, then off.  Then, turn on Density, Temperature, Pressure.
**Highlight Density. 
***Chart Axes, run through all options, then finally Bottom-Right.
***Line thickness 5, then back to 2.  Color to black, back to green.
***Line style - run through all of them.
***Marker style - run through all of them.
**Open 2d View Settings.
***Title "Harry Potter."
***Color - change to red.  Back to black.  (bug here, randomly changes)
***Change font.  Return to normal.
***Chart Legend locations - try all
***Left Axis - Title - "Fred."
***Left Axis - Layout - try all options. 
****(bug here, when Specify Range, 0, 2500.  Density line is bad.)
****(bug here, Specify Each of the Axis Labels doesn't work, use 1,11,111,1111,11111)
 
 
 
 
 
* Surface with edges.
* Select cell on.
* Select some cell.
*
 
 





Revision as of 01:55, 19 October 2011

This page contains instructions on how to test ParaView before a release. We focus on real use cases, as opposed to small toy tests for the dashboard.

Test setup

  • Either Linux or Windows client.
  • Remote server, at least 8 pvservers.
  • Server uses Mesa.

Exodus testing

  • Open 32 file Whipple Shield. All variables on. Apply.
  • Cell Data to Point Data. Apply.
  • Clip/ Scalar/ VOLFRAC2 / 0.5/ Apply.
  • Clip/ Y Normal/ Inside Out/ Show Plane off/ Apply.
  • Pipeline browser, select CellDataToPointData.
  • Contour/ VOLFRAC1/ 0.1/ Apply.
  • Color by pressure.
  • Color legend on. Move to bottom, then left, then top, then right side. Make sure all numbers show up.
  • Sources/ Text. Use "1234567890", " 1234567890", "iii", " iii", " Harry Potter." Move this text to other places. Make sure all parts of the text show up. (numerous bugs here)
  • Sources/ Annotate time filter. Apply. Move this text up about an inch.
  • Filters/ Alphabetical/ Annotate time filter. Apply.
  • Set time step to 40.
  • Rescale to Data Range.
  • Set time to first frame (using Icon).
  • Rubber band select some area to zoom to.
  • Reset.
  • +X/ -X/ +Y/ -Y/ +Z/ -Z/ -Y
  • Turn Orientation Axis off, then back on.
  • Turn show center off, then back on.
  • Reset center (the icon next to show center).
  • Rotate object, make sure it rotates around center.
  • Pick center on edge of object, make sure it rotates around center.
  • Reset, -Y
  • Last time frame, first timeframe, next frame (5 times), previous frame, play.
  • Pipeline browser, select last Clip.
  • Outline, points, surface with edges, wireframe.
  • Display tab - change opacity to 0.1. Change back to 1.0.
  • Display tab - show cube axis. (bug here)
  • Volume
  • Surface, change color to Solid Color.
  • Change pipeline browser to Contour.
  • Color editor.
    • Choose Preset - run through all of the presets.
    • Log scale on. Notice the color scale. Log scale off. (bug here)
    • Click "Rescale to Temporal Range".
    • Turn off Automatically Rescale to Fit Data Range.
    • Rescale range - change Min to 0, Max to 2.0e+10
  • Play
  • Back to first frame.
  • Pipeline browser, choose last clip.
    • Plot Over Line filter.
    • Select upper right part of plate, P, then lower left of sphere. Apply. (bug here)
    • (May need to highlight the 2d viewport
    • Display tab, toggle all variables on, then off. Then, turn on Density, Temperature, Pressure.
    • Highlight Density.
      • Chart Axes, run through all options, then finally Bottom-Right.
      • Line thickness 5, then back to 2. Color to black, back to green.
      • Line style - run through all of them.
      • Marker style - run through all of them.
    • Open 2d View Settings.
      • Title "Harry Potter."
      • Color - change to red. Back to black. (bug here, randomly changes)
      • Change font. Return to normal.
      • Chart Legend locations - try all
      • Left Axis - Title - "Fred."
      • Left Axis - Layout - try all options.
        • (bug here, when Specify Range, 0, 2500. Density line is bad.)
        • (bug here, Specify Each of the Axis Labels doesn't work, use 1,11,111,1111,11111)



  • Surface with edges.
  • Select cell on.
  • Select some cell.






CTH AMR testing