CMakeUserUseLATEX UseLATEX.cmake: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
(Version 1.1.0)
(Add NO_CONFIGURE option.)
Line 7: Line 7:
# File: UseLATEX.cmake
# File: UseLATEX.cmake
# CMAKE commands to actually use the LaTeX compiler
# CMAKE commands to actually use the LaTeX compiler
# Version: 1.1.0
# Version: 1.1.1
# Author: Kenneth Moreland (kmorel at sandia dot gov)
# Author: Kenneth Moreland (kmorel at sandia dot gov)
#
#
Line 26: Line 26:
# ADD_LATEX_DOCUMENT(<tex_file> [<image_dir>]
# ADD_LATEX_DOCUMENT(<tex_file> [<image_dir>]
#                      [BIBFILES <bib_files>] [INPUTS <input_tex_files>]
#                      [BIBFILES <bib_files>] [INPUTS <input_tex_files>]
#                      [USE_INDEX])
#                      [USE_INDEX] [NO_CONFIGURE])
#      Adds targets that compile <tex_file>.  It is assumed that
#      Adds targets that compile <tex_file>.  It is assumed that
#      ADD_LATEX_IMAGES has been called in <image_dir>.  (Note that the
#      ADD_LATEX_IMAGES has been called in <image_dir>.  (Note that the
Line 32: Line 32:
#      the bibliography files that are also copied to the output
#      the bibliography files that are also copied to the output
#      directory.  CONFIGURE_FILE (with @ONLY flag) is also run on
#      directory.  CONFIGURE_FILE (with @ONLY flag) is also run on
#      <tex_file> and all # the <input_tex_files>.  Also copies any .cls
#      <tex_file> and on all the <input_tex_files> unless the NO_CONFIGURE
#      .bst .clo files from the source directory to the binary directory.
#      option is given.  Also copies any .cls .bst .clo files from the
#      source directory to the binary directory.
#      The following targets are made:
#      The following targets are made:
#              dvi: Makes <name>.dvi
#              dvi: Makes <name>.dvi
Line 58: Line 59:
#
#
# History:
# History:
#
# 1.1.1 Added the NO_CONFIGURE option.  The @ character can be used when
#      specifying table column separators.  If two or more are used, then
#      will incorrectly substitute them.
#
#
# 1.1.0 Added ability include multiple bib files.  Added ability to do copy
# 1.1.0 Added ability include multiple bib files.  Added ability to do copy
Line 306: Line 311:
MACRO(LATEX_USAGE command message)
MACRO(LATEX_USAGE command message)
   MESSAGE(SEND_ERROR
   MESSAGE(SEND_ERROR
     "${message}\nUsage: ${command}(<tex_file> [<image_dir>]\n          [BIBFILES <bib_file> <bib_file> ...]\n          [INPUTS <tex_file> <tex_file> ...])"
     "${message}\nUsage: ${command}(<tex_file> [<image_dir>]\n          [BIBFILES <bib_file> <bib_file> ...]\n          [INPUTS <tex_file> <tex_file> ...]\n          [USE_INDEX] [NO_CONFIGURE])"
     )
     )
ENDMACRO(LATEX_USAGE command message)
ENDMACRO(LATEX_USAGE command message)
Line 314: Line 319:
# LATEX_INPUTS.
# LATEX_INPUTS.
MACRO(PARSE_ADD_LATEX_ARGUMENTS command)
MACRO(PARSE_ADD_LATEX_ARGUMENTS command)
   LATEX_PARSE_ARGUMENTS(LATEX "BIBFILES;INPUTS" "USE_INDEX" ${ARGN})
   LATEX_PARSE_ARGUMENTS(LATEX "BIBFILES;INPUTS" "USE_INDEX;NO_CONFIGURE"
    ${ARGN})


   # The first argument is the target latex file.
   # The first argument is the target latex file.
Line 423: Line 429:
   PARSE_ADD_LATEX_ARGUMENTS(ADD_LATEX_DOCUMENT ${ARGV})
   PARSE_ADD_LATEX_ARGUMENTS(ADD_LATEX_DOCUMENT ${ARGV})


  IF (LATEX_NO_CONFIGURE)
    SET(LATEX_CONFIGURE_FLAGS COPYONLY)
  ELSE (LATEX_NO_CONFIGURE)
    SET(LATEX_CONFIGURE_FLAGS @ONLY)
  ENDIF (LATEX_NO_CONFIGURE)
   CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${LATEX_TARGET}.tex
   CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${LATEX_TARGET}.tex
     ${LATEX_TARGET}.tex
     ${LATEX_TARGET}.tex
     @ONLY)
     ${LATEX_CONFIGURE_FLAGS})
   ADD_CUSTOM_TARGET(${LATEX_TARGET}.tex
   ADD_CUSTOM_TARGET(${LATEX_TARGET}.tex
     ${CMAKE_COMMAND} .
     ${CMAKE_COMMAND} .
Line 442: Line 453:


   FOREACH (input ${LATEX_INPUTS})
   FOREACH (input ${LATEX_INPUTS})
     CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${input} ${input} @ONLY)
     CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${input} ${input}
      ${LATEX_CONFIGURE_FLAGS})
     ADD_CUSTOM_TARGET(${input}
     ADD_CUSTOM_TARGET(${input}
       ${CMAKE_COMMAND} .
       ${CMAKE_COMMAND} .

Revision as of 11:59, 12 April 2006

  1. Back

#
# File: UseLATEX.cmake
# CMAKE commands to actually use the LaTeX compiler
# Version: 1.1.1
# Author: Kenneth Moreland (kmorel at sandia dot gov)
#
# Copyright 2004 Sandia Corporation.
# Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive
# license for use of this work by or on behalf of the
# U.S. Government. Redistribution and use in source and binary forms, with
# or without modification, are permitted provided that this Notice and any
# statement of authorship are reproduced on all copies.
#
# The following MACROS are defined:
#
# ADD_LATEX_IMAGES(<dir>)
#       Searches <dir> for images files and creates targets that convert
#       them to types that various LaTeX compilers understand.  Makes the
#       targets latex_images_ps and latex_images_pdf.
#
# ADD_LATEX_DOCUMENT(<tex_file> [<image_dir>]
#                       [BIBFILES <bib_files>] [INPUTS <input_tex_files>]
#                       [USE_INDEX] [NO_CONFIGURE])
#       Adds targets that compile <tex_file>.  It is assumed that
#       ADD_LATEX_IMAGES has been called in <image_dir>.  (Note that the
#       dir parameter is different for the two commands.)  <bib_files> are
#       the bibliography files that are also copied to the output
#       directory.  CONFIGURE_FILE (with @ONLY flag) is also run on
#       <tex_file> and on all the <input_tex_files> unless the NO_CONFIGURE
#       option is given.  Also copies any .cls .bst .clo files from the
#       source directory to the binary directory.
#       The following targets are made:
#               dvi: Makes <name>.dvi
#               pdf: Makes <name>.pdf using pdflatex.
#               safepdf: Makes <name>.pdf using ps2pdf.  If using the default
#                       program arguments, this will ensure all fonts are
#                       embedded and no lossy compression has been performed
#                       on images.
#               ps: Makes <name>.ps
#               html: Makes <name>.html
#               auxclean: Deletes <name>.aux.  This is sometimes necessary
#                       if a LaTeX error occurs and writes a bad aux file.
#       If the argument USE_INDEX is given, then commands to build an index
#       are made.
#
# ADD_LATEX_TARGETS(<tex_file> [<image_dir>]
#                       [BIBFILES <bib_files>] [INPUTS <input_tex_files>]
#                       [USE_INDEX])
#       Like ADD_LATEX_DOCUMENT, except no files are configured or copied.
#       The files are assumed to already be added to the binary directory.
#       This varient is helpful if one set of latex files makes different
#       varients of documents.  For example, with building chapters
#       separately from the entire document.
#
# History:
#
# 1.1.1 Added the NO_CONFIGURE option.  The @ character can be used when
#       specifying table column separators.  If two or more are used, then
#       will incorrectly substitute them.
#
# 1.1.0 Added ability include multiple bib files.  Added ability to do copy
#       sub-tex files for multipart tex files.
#
# 1.0.0 If both ps and pdf type images exist, just copy the one that
#       matches the current render mode.  Replaced a bunch of STRING
#       commands with GET_FILENAME_COMPONENT commands that were made to do
#       the desired function.
#
# 0.4.0 First version posted to CMake Wiki.
#

IF ("${CMAKE_CURRENT_BINARY_DIR}" STREQUAL "${CMAKE_CURRENT_SOURCE_DIR}")
  MESSAGE(SEND_ERROR "LaTeX files must be built out of source.")
ENDIF ("${CMAKE_CURRENT_BINARY_DIR}" STREQUAL "${CMAKE_CURRENT_SOURCE_DIR}")

INCLUDE(${CMAKE_ROOT}/Modules/FindLATEX.cmake)
MARK_AS_ADVANCED(CLEAR
  LATEX_COMPILER
  PDFLATEX_COMPILER
  BIBTEX_COMPILER
  MAKEINDEX_COMPILER
  DVIPS_CONVERTER
  PS2PDF_CONVERTER
  LATEX2HTML_CONVERTER
  )

MACRO(LATEX_NEEDIT VAR NAME)
  IF (NOT ${VAR})
    MESSAGE(SEND_ERROR "I need the ${NAME} command.")
  ENDIF(NOT ${VAR})
ENDMACRO(LATEX_NEEDIT)
MACRO(LATEX_WANTIT VAR NAME)
  IF (NOT ${VAR})
    MESSAGE(STATUS "I could not find the ${NAME} command.")
  ENDIF(NOT ${VAR})
ENDMACRO(LATEX_WANTIT)

LATEX_NEEDIT(LATEX_COMPILER latex)
LATEX_WANTIT(PDFLATEX_COMPILER pdflatex)
LATEX_NEEDIT(BIBTEX_COMPILER bibtex)
LATEX_NEEDIT(MAKEINDEX_COMPILER makeindex)
LATEX_WANTIT(DVIPS_CONVERTER dvips)
LATEX_WANTIT(PS2PDF_CONVERTER ps2pdf)
LATEX_WANTIT(LATEX2HTML_CONVERTER latex2html)

SET(LATEX_COMPILER_FLAGS "-interaction=nonstopmode"
  CACHE STRING "Flags passed to latex.")
SET(PDFLATEX_COMPILER_FLAGS ${LATEX_COMPILER_FLAGS}
  CACHE STRING "Flags passed to pdflatex.")
SET(BIBTEX_COMPILER_FLAGS ""
  CACHE STRING "Flags passed to bibtex.")
SET(MAKEINDEX_COMPILER_FLAGS ""
  CACHE STRING "Flags passed to makeindex.")
SET(DVIPS_CONVERTER_FLAGS "-Ppdf -G0 -t letter"
  CACHE STRING "Flags passed to dvips.")
SET(PS2PDF_CONVERTER_FLAGS "-dMaxSubsetPct=100 -dCompatibilityLevel=1.3 -dSubsetFonts=true -dEmbedAllFonts=true -dAutoFilterColorImages=false -dAutoFilterGrayImages=false -dColorImageFilter=/FlateEncode -dGrayImageFilter=/FlateEncode -dMonoImageFilter=/FlateEncode"
  CACHE STRING "Flags passed to ps2pdf.")
SET(LATEX2HTML_CONVERTER_FLAGS ""
  CACHE STRING "Flags passed to latex2html.")
MARK_AS_ADVANCED(
  LATEX_COMPILER_FLAGS
  PDFLATEX_COMPILER_FLAGS
  BIBTEX_COMPILER_FLAGS
  MAKEINDEX_COMPILER_FLAGS
  DVIPS_CONVERTER_FLAGS
  PS2PDF_CONVERTER_FLAGS
  LATEX2HTML_CONVERTER_FLAGS
  )
SEPARATE_ARGUMENTS(LATEX_COMPILER_FLAGS)
SEPARATE_ARGUMENTS(PDFLATEX_COMPILER_FLAGS)
SEPARATE_ARGUMENTS(BIBTEX_COMPILER_FLAGS)
SEPARATE_ARGUMENTS(MAKEINDEX_COMPILER_FLAGS)
SEPARATE_ARGUMENTS(DVIPS_CONVERTER_FLAGS)
SEPARATE_ARGUMENTS(PS2PDF_CONVERTER_FLAGS)
SEPARATE_ARGUMENTS(LATEX2HTML_CONVERTER_FLAGS)

FIND_PROGRAM(IMAGEMAGICK_CONVERT convert
  DOC "The convert program that comes with ImageMagick (available at http://www.imagemagick.org)."
  )
IF (NOT IMAGEMAGICK_CONVERT)
  MESSAGE(SEND_ERROR "Could not find convert program.  Please download ImageMagick from http://www.imagemagick.org and install.")
ENDIF (NOT IMAGEMAGICK_CONVERT)

OPTION(LATEX_SMALL_IMAGES
  "If on, the raster images will be converted to 1/6 the original size.  This is because papers usually require 600 dpi images whereas most monitors only require at most 96 dpi.  Thus, smaller images make smaller files for web distributation and can make it faster to read dvi files."
  OFF)
IF (LATEX_SMALL_IMAGES)
  SET(LATEX_RASTER_SCALE 16)
  SET(LATEX_OPPOSITE_RASTER_SCALE 100)
ELSE (LATEX_SMALL_IMAGES)
  SET(LATEX_RASTER_SCALE 100)
  SET(LATEX_OPPOSITE_RASTER_SCALE 16)
ENDIF (LATEX_SMALL_IMAGES)

MACRO(LATEX_CAR var)
  SET(${var} ${ARGV1})
ENDMACRO(LATEX_CAR)
MACRO(LATEX_CDR var junk)
  SET(${var} ${ARGN})
ENDMACRO(LATEX_CDR)

MACRO(ADD_LATEX_IMAGES dir)
  FILE(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${dir})

  # This command just makes sure we rebuild images of LATEX_SMALL_IMAGES
  # changed.
  ADD_CUSTOM_COMMAND(OUTPUT raster_image_rescale_${LATEX_RASTER_SCALE}
    COMMAND ${CMAKE_COMMAND}
    ARGS -E remove raster_image_rescale_${LATEX_OPPOSITE_RASTER_SCALE} \; ${CMAKE_COMMAND} -E echo Built > raster_image_rescale_${LATEX_RASTER_SCALE}
    )

  FILE(GLOB png_file_list ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/*.png)
  FOREACH (png_file ${png_file_list})
    GET_FILENAME_COMPONENT(image_name ${png_file} NAME_WE)
    SET(png_out_file ${CMAKE_CURRENT_BINARY_DIR}/${dir}/${image_name}.png)
    ADD_CUSTOM_COMMAND(OUTPUT ${png_out_file}
      COMMAND ${IMAGEMAGICK_CONVERT}
      ARGS ${png_file} -resize ${LATEX_RASTER_SCALE}% ${png_out_file}
      DEPENDS ${png_file} raster_image_rescale_${LATEX_RASTER_SCALE}
      COMMENT "png image"
      )
    SET(OUT_PNG_FILES ${OUT_PNG_FILES} ${png_out_file})
    IF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.eps)
      # An eps file already exists.  No need to convert.
    ELSE (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.eps)
      SET(eps_file ${CMAKE_CURRENT_BINARY_DIR}/${dir}/${image_name}.eps)
      ADD_CUSTOM_COMMAND(OUTPUT ${eps_file}
        COMMAND ${IMAGEMAGICK_CONVERT}
        ARGS ${png_file} -resize ${LATEX_RASTER_SCALE}% ${eps_file}
        DEPENDS ${png_file} raster_image_rescale_${LATEX_RASTER_SCALE}
        COMMENT "postscript image"
        )
      SET(OUT_EPS_FILES ${OUT_EPS_FILES} ${eps_file})
    ENDIF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.eps)
  ENDFOREACH (png_file)

  FILE(GLOB eps_file_list ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/*.eps)
  FOREACH (eps_file ${eps_file_list})
    GET_FILENAME_COMPONENT(image_name ${eps_file} NAME_WE)
    IF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.pdf)
      # A pdf file already exists.  No need to convert.
    ELSE (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.pdf)
      IF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.png)
        # A png file already exists.  No need to convert.
      ELSE (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.png)
        SET(pdf_file ${CMAKE_CURRENT_BINARY_DIR}/${dir}/${image_name}.pdf)
        ADD_CUSTOM_COMMAND(OUTPUT ${pdf_file}
          COMMAND ${IMAGEMAGICK_CONVERT}
          ARGS ${eps_file} ${pdf_file}
          DEPENDS ${eps_file}
          COMMENT "pdf image"
          )
        SET(OUT_PDF_FILES ${OUT_PDF_FILES} ${pdf_file})
      ENDIF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.png)
    ENDIF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.pdf)
    SET(eps_out_file ${CMAKE_CURRENT_BINARY_DIR}/${dir}/${image_name}.eps)
    ADD_CUSTOM_COMMAND(OUTPUT ${eps_out_file}
      COMMAND ${CMAKE_COMMAND}
      ARGS -E copy ${eps_file} ${eps_out_file}
      DEPENDS ${eps_file}
      COMMENT "postscript image"
      )
    SET(OUT_EPS_FILES ${OUT_EPS_FILES} ${eps_out_file})
  ENDFOREACH (eps_file)

  FILE(GLOB pdf_file_list ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/*.pdf)
  FOREACH (pdf_file ${pdf_file_list})
    GET_FILENAME_COMPONENT(image_name ${pdf_file} NAME_WE)
    SET(pdf_out_file ${CMAKE_CURRENT_BINARY_DIR}/${dir}/${image_name}.pdf)
    ADD_CUSTOM_COMMAND(OUTPUT ${pdf_out_file}
      COMMAND ${CMAKE_COMMAND}
      ARGS -E copy ${pdf_file} ${pdf_out_file}
      DEPENDS ${pdf_file}
      COMMENT "pdf image"
      )
    SET(OUT_PDF_FILES ${OUT_PDF_FILES} ${pdf_out_file})
    IF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.eps)
      # An eps file already exists.  No need to convert
    ELSE (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.eps)
      SET(eps_file ${CMAKE_CURRENT_BINARY_DIR}/${dir}/${image_name}.eps)
      ADD_CUSTOM_COMMAND(OUTPUT ${eps_file}
        COMMAND ${IMAGEMAGICK_CONVERT}
        ARGS ${pdf_file} ${eps_file}
        DEPENDS ${pdf_file}
        COMMENT "postscript image"
        )
      SET(OUT_EPS_FILES ${OUT_EPS_FILES} ${eps_file})
    ENDIF (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${dir}/${image_name}.eps)
  ENDFOREACH (pdf_file)

  ADD_CUSTOM_TARGET(latex_images_ps
    ${CMAKE_COMMAND} -E echo "Building image files for ps documents."
    DEPENDS ${OUT_EPS_FILES}
    )
  ADD_CUSTOM_TARGET(latex_images_pdf
    DEPENDS ${OUT_PNG_FILES} ${OUT_PDF_FILES})
ENDMACRO(ADD_LATEX_IMAGES)


MACRO(LATEX_COPY_GLOBBED_FILES pattern dest)
  FILE(GLOB file_list ${pattern})
  FOREACH(in_file ${file_list})
    GET_FILENAME_COMPONENT(out_file ${in_file} NAME)
    CONFIGURE_FILE(${in_file} ${dest}/${out_file} COPYONLY)
  ENDFOREACH(in_file)
ENDMACRO(LATEX_COPY_GLOBBED_FILES)

MACRO(LATEX_LIST_CONTAINS var value)
  SET(${var})
  FOREACH (value2 ${ARGN})
    IF (${value} STREQUAL ${value2})
      SET(${var} TRUE)
    ENDIF (${value} STREQUAL ${value2})
  ENDFOREACH (value2)
ENDMACRO(LATEX_LIST_CONTAINS)

MACRO(LATEX_PARSE_ARGUMENTS prefix arg_names option_names)
  SET(DEFAULT_ARGS)
  FOREACH(arg_name ${arg_names})
    SET(${prefix}_${arg_name})
  ENDFOREACH(arg_name)
  FOREACH(option ${option_names})
    SET(${prefix}_${option})
  ENDFOREACH(option)

  SET(current_arg_name DEFAULT_ARGS)
  SET(current_arg_list)
  FOREACH(arg ${ARGN})
    LATEX_LIST_CONTAINS(is_arg_name ${arg} ${arg_names})
    IF (is_arg_name)
      SET(${prefix}_${current_arg_name} ${current_arg_list})
      SET(current_arg_name ${arg})
      SET(current_arg_list)
    ELSE (is_arg_name)
      LATEX_LIST_CONTAINS(is_option ${arg} ${option_names})
      IF (is_option)
        SET(${prefix}_${arg} TRUE)
      ELSE (is_option)
        SET(current_arg_list ${current_arg_list} ${arg})
      ENDIF (is_option)
    ENDIF (is_arg_name)
  ENDFOREACH(arg)
  SET(${prefix}_${current_arg_name} ${current_arg_list})
ENDMACRO(LATEX_PARSE_ARGUMENTS)

MACRO(LATEX_USAGE command message)
  MESSAGE(SEND_ERROR
    "${message}\nUsage: ${command}(<tex_file> [<image_dir>]\n           [BIBFILES <bib_file> <bib_file> ...]\n           [INPUTS <tex_file> <tex_file> ...]\n           [USE_INDEX] [NO_CONFIGURE])"
    )
ENDMACRO(LATEX_USAGE command message)

# Parses arguments to ADD_LATEX_DOCUMENT and ADD_LATEX_TARGETS and sets the
# variables LATEX_TARGET, LATEX_IMAGE_DIR, LATEX_BIBFILES, and
# LATEX_INPUTS.
MACRO(PARSE_ADD_LATEX_ARGUMENTS command)
  LATEX_PARSE_ARGUMENTS(LATEX "BIBFILES;INPUTS" "USE_INDEX;NO_CONFIGURE"
    ${ARGN})

  # The first argument is the target latex file.
  IF (LATEX_DEFAULT_ARGS)
    LATEX_CAR(target ${LATEX_DEFAULT_ARGS})
    LATEX_CDR(LATEX_DEFAULT_ARGS ${LATEX_DEFAULT_ARGS})
    GET_FILENAME_COMPONENT(LATEX_TARGET ${target} NAME_WE)
  ELSE (LATEX_DEFAULT_ARGS)
    LATEX_USAGE(${command} "No tex file target given to ${command}.")
  ENDIF (LATEX_DEFAULT_ARGS)

  # The second argument is the (optional) image dir.
  IF (LATEX_DEFAULT_ARGS)
    LATEX_CAR(LATEX_IMAGE_DIR ${LATEX_DEFAULT_ARGS})
    LATEX_CDR(LATEX_DEFAULT_ARGS ${LATEX_DEFAULT_ARGS})
    IF ("${LATEX_IMAGE_DIR}" STREQUAL NONE)
      # Backward compatibility
      SET(LATEX_IMAGE_DIR)
    ENDIF ("${LATEX_IMAGE_DIR}" STREQUAL NONE)
  ENDIF (LATEX_DEFAULT_ARGS)

  # Old versions of UseLATEX.cmake had a bibtex file as the third argument.
  IF (LATEX_DEFAULT_ARGS)
    IF ("${LATEX_DEFAULT_ARGS}" STREQUAL NONE)
      # Backward compatibility
    ELSE ("${LATEX_DEFAULT_ARGS}" STREQUAL NONE)
      SET(LATEX_BIBFILES ${LATEX_DEFAULT_ARGS})
    ENDIF ("${LATEX_DEFAULT_ARGS}" STREQUAL NONE)
  ENDIF (LATEX_DEFAULT_ARGS)
ENDMACRO(PARSE_ADD_LATEX_ARGUMENTS)

MACRO(ADD_LATEX_TARGETS)
  PARSE_ADD_LATEX_ARGUMENTS(ADD_LATEX_TARGETS ${ARGV})

  IF (LATEX_IMAGE_DIR)
    IF (${LATEX_IMAGE_DIR} MATCHES ^[.]?$)
      # Do not need to do anything, targets should already be made.
    ELSE (${LATEX_IMAGE_DIR} MATCHES ^[.]?$)
      ADD_CUSTOM_TARGET(latex_images_ps
        ${CMAKE_COMMAND} -E chdir ${LATEX_IMAGE_DIR} ${CMAKE_MAKE_PROGRAM} latex_images_ps)
      ADD_CUSTOM_TARGET(latex_images_pdf
        ${CMAKE_COMMAND} -E chdir ${LATEX_IMAGE_DIR} ${CMAKE_MAKE_PROGRAM} latex_images_pdf)
    ENDIF (${LATEX_IMAGE_DIR} MATCHES ^[.]?$)
  ELSE (LATEX_IMAGE_DIR)
    # No image directory.  Fake image targets.
    ADD_CUSTOM_TARGET(latex_images_ps)
    ADD_CUSTOM_TARGET(latex_images_pdf)
  ENDIF (LATEX_IMAGE_DIR)

  SET(make_dvi_command ${LATEX_COMPILER} ${LATEX_COMPILER_FLAGS} ${LATEX_TARGET}.tex)
  SET(make_dvi_depends ${LATEX_TARGET}.tex ${LATEX_INPUTS} latex_images_ps)

  IF (LATEX_BIBFILES)
    SET(make_dvi_command ${make_dvi_command}
      COMMAND ${BIBTEX_COMPILER} ${BIBTEX_COMPILER_FLAGS} ${LATEX_TARGET})
    SET(make_dvi_depends ${make_dvi_depends} ${LATEX_BIBFILES})
  ENDIF (LATEX_BIBFILES)

  IF (LATEX_USE_INDEX)
    SET(make_dvi_command ${make_dvi_command}
      COMMAND ${LATEX_COMPILER} ${LATEX_COMPILER_FLAGS} ${LATEX_TARGET}.tex
      COMMAND ${MAKEINDEX_COMPILER} ${MAKEINDEX_COMPILER_FLAGS} ${LATEX_TARGET}.idx)
  ENDIF (LATEX_USE_INDEX)

  SET(make_dvi_command ${make_dvi_command}
    COMMAND ${LATEX_COMPILER} ${LATEX_COMPILER_FLAGS} ${LATEX_TARGET}.tex
    COMMAND ${LATEX_COMPILER} ${LATEX_COMPILER_FLAGS} ${LATEX_TARGET}.tex
    COMMAND ${LATEX_COMPILER} ${LATEX_COMPILER_FLAGS} ${LATEX_TARGET}.tex)

  ADD_CUSTOM_TARGET(dvi ALL
    ${make_dvi_command}
    )
  ADD_DEPENDENCIES(dvi ${make_dvi_depends})

  IF (PDFLATEX_COMPILER)
    ADD_CUSTOM_TARGET(pdf
      ${PDFLATEX_COMPILER} ${PDFLATEX_COMPILER_FLAGS} ${LATEX_TARGET}.tex
      )
    ADD_DEPENDENCIES(pdf dvi latex_images_pdf)
  ENDIF (PDFLATEX_COMPILER)

  IF (DVIPS_CONVERTER)
    ADD_CUSTOM_TARGET(ps
      ${DVIPS_CONVERTER} ${DVIPS_CONVERTER_FLAGS} -o ${LATEX_TARGET}.ps ${LATEX_TARGET}.dvi
      )
    ADD_DEPENDENCIES(ps dvi)
    IF (PS2PDF_CONVERTER)
      ADD_CUSTOM_TARGET(safepdf
        ${PS2PDF_CONVERTER} ${PS2PDF_CONVERTER_FLAGS} ${LATEX_TARGET}.ps ${LATEX_TARGET}.pdf
        )
      ADD_DEPENDENCIES(safepdf ps)
    ENDIF (PS2PDF_CONVERTER)
  ENDIF (DVIPS_CONVERTER)

  IF (LATEX2HTML_CONVERTER)
    ADD_CUSTOM_TARGET(html
      ${LATEX2HTML_CONVERTER} ${LATEX2HTML_CONVERTER_FLAGS} ${LATEX_TARGET}.tex
      )
    ADD_DEPENDENCIES(html ${LATEX_TARGET}.tex ${LATEX_INPUTS})
  ENDIF (LATEX2HTML_CONVERTER)

  ADD_CUSTOM_TARGET(auxclean
    ${CMAKE_COMMAND} -E remove ${LATEX_TARGET}.aux ${LATEX_TARGET}.idx ${LATEX_TARGET}.ind
    )
ENDMACRO(ADD_LATEX_TARGETS)

MACRO(ADD_LATEX_DOCUMENT)
  PARSE_ADD_LATEX_ARGUMENTS(ADD_LATEX_DOCUMENT ${ARGV})

  IF (LATEX_NO_CONFIGURE)
    SET(LATEX_CONFIGURE_FLAGS COPYONLY)
  ELSE (LATEX_NO_CONFIGURE)
    SET(LATEX_CONFIGURE_FLAGS @ONLY)
  ENDIF (LATEX_NO_CONFIGURE)
  CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${LATEX_TARGET}.tex
    ${LATEX_TARGET}.tex
    ${LATEX_CONFIGURE_FLAGS})
  ADD_CUSTOM_TARGET(${LATEX_TARGET}.tex
    ${CMAKE_COMMAND} .
    DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${LATEX_TARGET}.tex
    )

  FOREACH (bib_file ${LATEX_BIBFILES})
    CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${bib_file}
      ${bib_file}
      COPYONLY)
    ADD_CUSTOM_TARGET(${bib_file}
      ${CMAKE_COMMAND} .
      DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${bib_file}
      )
  ENDFOREACH (bib_file)

  FOREACH (input ${LATEX_INPUTS})
    CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/${input} ${input}
      ${LATEX_CONFIGURE_FLAGS})
    ADD_CUSTOM_TARGET(${input}
      ${CMAKE_COMMAND} .
      DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/${input}
      )
  ENDFOREACH(input)

  LATEX_COPY_GLOBBED_FILES(${CMAKE_CURRENT_SOURCE_DIR}/*.cls .)
  LATEX_COPY_GLOBBED_FILES(${CMAKE_CURRENT_SOURCE_DIR}/*.bst .)
  LATEX_COPY_GLOBBED_FILES(${CMAKE_CURRENT_SOURCE_DIR}/*.clo .)

  ADD_LATEX_TARGETS(${ARGV})
ENDMACRO(ADD_LATEX_DOCUMENT)

  1. Back



CMake: [Welcome | Site Map]