<html>
<body>
Let's keep this on the ParaView mailing list.<br><br>
Are you saying that when you load the .encas file the entire data set
loads properly or that there are no errors in the .encas file
itself? To open an EnSight data set, ParaView expects you to load a
case file (an ASCII file that points to geometry and variable files), so
if you try to load geometry (.geo) or variable (.vel and .scl1, in your
data set) files directly instead of loading a case file, I would not
expect ParaView to know what to do. Also ParaView may have trouble
with the .encas file extension (assuming this is your case file) since it
expects EnSight case files to have the extension .case.<br><br>
- Amy<br><br>
At 02:04 PM 8/17/2005, Palmer, Teresa wrote:<br>
<blockquote type=cite class=cite cite=""><font size=2 color="#000080">Hi
Amy,<br>
<br>
I have an .encas file which has loaded fine but it’s the .vel .geo .scl1
files which cause it to crash. I have looked the Ensight website
which talks about exporting the files from Fluent <br>
<a href="http://www.ensight.com/FAQ/faq.0019.html" eudora="autourl">
http://www.ensight.com/FAQ/faq.0019.html</a><br>
and it seems like the files are exported with these extensions,<br>
<br>
Thanks,<br>
Jane<br>
</font><font face="Tahoma" size=2>-----Original Message-----<br>
<b>From:</b> Amy Squillacote
[<a href="mailto:amy.squillacote@kitware.com" eudora="autourl">
mailto:amy.squillacote@kitware.com</a>] <br>
<b>Sent:</b> Tuesday, August 16, 2005 6:33 AM<br>
<b>To:</b> Renato N. Elias; Palmer, Teresa<br>
<b>Cc:</b> paraview@paraview.org<br>
<b>Subject:</b> Re: RES: [Paraview] Problems reading Ensight files<br>
</font><font face="Times New Roman, Times"> <br>
Hi Teresa,<br><br>
Is your </font><font size=2>G:/Fluent/ensight-vel-mag.vel file an EnSight
case file? They usually have the file extension .case. If you
have a file with the .case extension for this data set, try loading it
instead of the .vel one.<br><br>
</font>- Amy<br><br>
At 07:24 PM 8/15/2005, Renato N. Elias wrote:<br><br>
<font face="Times New Roman, Times" size=2 color="#0000FF">Ok,<br>
</font> <br>
<font size=2 color="#0000FF">Are you trying to read Binary or ASCII data?
Were your data files written by Fortran or C language?<br>
</font> <br>
<font size=2 color="#0000FF">Renato.<br>
<hr>
<div align="center"></font></div>
<font face="Tahoma" size=2><b>De:</b> Palmer, Teresa [
<a href="mailto:Teresa_Palmer@nrel.gov" eudora="autourl">
mailto:Teresa_Palmer@nrel.gov</a>] <br>
<b>Enviada em:</b> segunda-feira, 15 de agosto de 2005 20:16<br>
<b>Para:</b> Renato N. Elias<br>
<b>Assunto:</b> RE: [Paraview] Problems reading Ensight files<br>
</font><br>
<font size=2 color="#000080">It still crashed,<br>
</font><br>
<font size=2 color="#000080">Thanks<br>
</font><br>
<font size=2 color="#000080">Teresa<br>
</font><br>
<font size=2 color="#000080"> <br>
</font><br>
<font face="Tahoma" size=2>-----Original Message-----<br>
<b>From:</b> Renato N. Elias [
<a href="mailto:rnelias@nacad.ufrj.br" eudora="autourl">
mailto:rnelias@nacad.ufrj.br</a>] <br>
<b>Sent:</b> Monday, August 15, 2005 4:23 PM<br>
<b>To:</b> Palmer, Teresa<br>
<b>Cc:</b> paraview@paraview.org<br>
<b>Subject:</b> RES: [Paraview] Problems reading Ensight files<br>
</font><br>
<br><br>
<font size=2 color="#0000FF">Hello Teresa,<br>
</font><br>
<br><br>
<font size=2 color="#0000FF">First of all, try to set up the byte order
to "little endian" <br>
</font><br>
<br><br>
<font size=2 color="#0000FF">cheers<br>
</font><br>
<br><br>
<font size=2 color="#0000FF">Renato N. Elias<br>
</font><br>
<font size=2 color="#0000FF">NACAD/COPPE/UFRJ<br>
</font><br>
<font size=2 color="#0000FF">Rio de Janeiro, Brasil<br>
</font><br>
<font size=2 color="#0000FF">
<a href="http://www.nacad.ufrj.br/~rnelias" eudora="autourl">
http://www.nacad.ufrj.br/~rnelias</a><br>
<hr>
<div align="center"></font></div>
<font face="Tahoma" size=2><b>De:</b>
paraview-bounces+rnelias=nacad.ufrj.br@paraview.org [
<a href="mailto:paraview-bounces+rnelias=nacad.ufrj.br@paraview.org" eudora="autourl">
mailto:paraview-bounces+rnelias=nacad.ufrj.br@paraview.org</a>] <b>Em
nome de </b>Palmer, Teresa<br>
<b>Enviada em:</b> segunda-feira, 15 de agosto de 2005 19:17<br>
<b>Para:</b> paraview@paraview.org<br>
<b>Assunto:</b> [Paraview] Problems reading Ensight files<br>
</font><br>
<font size=2>Hi,<br>
</font><br>
<font size=2> <br>
</font><br>
<font size=2>I am totally new to ParaView and have been given some files
in Ensight Case Gold Format to read. However, everytime I load up the
files and then press Accept the program exits/crashes. The trace
script reads as follows.<br>
</font><br>
<font size=2> <br>
</font><br>
<font size=2>Any ideas – I will do the tutorials though in case this is
some novice error on my part,<br>
</font><br>
<font size=2> <br>
</font><br>
<font size=2> <br>
</font><br>
<font size=2> <br>
</font><br>
<font size=2>$kw(vtkTemp5) ReadFileInformation $kw(vtkTemp916)
"G:/Fluent/ensight-vel-mag.vel"<br>
</font><br>
<font size=2>$kw(vtkTemp5) FinalizeRead $kw(vtkTemp916)
"G:/Fluent/ensight-vel-mag.vel"<br>
</font><br>
<font size=2>set kw(vtkTemp938) [$kw(vtkTemp916) GetPVWidget
{Filename}]<br>
</font><br>
<font size=2>$kw(vtkTemp938) SetValue
"G:/Fluent/ensight-vel-mag.vel"<br>
</font><br>
<font size=2>set kw(vtkTemp923) [$kw(vtkTemp916) GetPVWidget
{ByteOrder}]<br>
</font><br>
<font size=2>$kw(vtkTemp923) SetCurrentValue {0}<br>
</font><br>
<font size=2>set kw(vtkTemp933) [$kw(vtkTemp916) GetPVWidget
{PointArrays}]<br>
</font><br>
<font size=2>set kw(vtkTemp937) [$kw(vtkTemp916) GetPVWidget
{CellArrays}]<br>
</font><br>
<font size=2># Error or warning:<br>
</font><br>
<font size=2># There was a VTK Error in file:
\martink\ParaView14\Servers\Filters\vtkPVEnSightMasterServerReader.cxx
(225)<br>
</font><br>
<font size=2># Error reading case file on at least one node.<br>
</font><br>
<font size=2>#<br>
</font>_______________________________________________<br>
ParaView mailing list<br>
ParaView@paraview.org<br>
<a href="http://www.paraview.org/mailman/listinfo/paraview" eudora="autourl">
http://www.paraview.org/mailman/listinfo/paraview</a></blockquote></body>
</html>