[Paraview] gpu_shader4 extension is not supported
Patrick Begou
Patrick.Begou at legi.grenoble-inp.fr
Tue May 16 04:58:46 EDT 2017
Hi Burlen,
I think there is a main concept that I do not understand in building Paraview
and Mesa as I have also all the wiki pages printed in front of me since the
begining. It is how to build paraview on a server without GPU _but_ with
Paraview GUI enabled.
With the Wiki I was able to build Paraview on the workstations (with GPU and
Paraview GUI set to ON) and on the cluster nodes (No GPU and no GUI for
paraview). But the setup on a server without GPU and paraview GUI enabled is
still unclear for me.
I'll try a new Mesa setup with your suggestion below but keeping
*-DPARAVIEW_BUILD_QT_GUI=ON*
Thanks a lot for all the details you provide is this last answer.
Patrick
Burlen Loring wrote:
> Hi Patrick,
>
> Your output shows you enabled some gpu specific drivers, and GLX. I think that
> is going to screw things up for you. Best to disable all of them but the ones
> you specifically need and to explicitly disable glx.
>
> Here is how I configured OSMesa for a Cray
>
> ../mesa-17.0.2/configure --enable-texture-float --disable-glx
> --disable-dri --disable-egl --disable-gles1 --disable-gles2 --disable-gbm
> --disable-driglx-direct --disable-xvmc --enable-gallium-osmesa
> --with-gallium-drivers=swrast,swr
> --prefix=/usr/common/software/ParaView/mesa/17.0.2/
>
> And here is how ParaView is configured on the same system. When building
> ParaView with OSMesa the ParaView GUI should be disabled to prevent window
> system dependencies(X11, Qt etc). Note that there are a number of options in
> play to configure for OSMesa. I've highlighted them in blue below. This info
> is also on the Wiki.
>
> #!/bin/bash
>
> LIB_EXT=so
> PY_LIB_EXT=so
> GLU_LIB_EXT=so
> MESA_LIB_EXT=so
>
> COMP_FLAGS="-fPIC -Ofast -march=native -mtune=native"
> CCOMP=`which gcc`
> CXXCOMP=`which g++`
> FTNCOMP=`which gfortran`
>
> export XTPE_LINK_TYPE=dynamic
>
> PYTHON=/usr/common/software/ParaView/python/2.7.12
> GLU=/usr/common/software/ParaView/glu/9.0.0/
> BOOST=/usr/common/software/ParaView/boost/1.63.0/
> MESA=/usr/common/software/ParaView/mesa/17.0.2/
>
> RCA=/opt/cray/rca/2.1.6_g2c60fbf-2.265/lib64
> ALPS=/opt/cray/alps/6.3.4-2.21/lib64
> XPMEM=/opt/cray/xpmem/2.1.1_gf9c9084-2.38/lib64
> DMAPP=/opt/cray/dmapp/7.1.1-39.37/lib64
> PMI=/opt/cray/pe/pmi/5.0.10-1.0000.11050.0.0.ari/lib64
> UGNI=/opt/cray/ugni/6.0.15-2.2/lib64
> UDREG=/opt/cray/udreg/2.3.2-7.54/lib64
> MPT=/opt/cray/pe/mpt/7.4.4/gni/mpich-gnu/5.1/lib
>
> cmake \
> -DCMAKE_C_COMPILER=$CCOMP \
> -DCMAKE_CXX_COMPILER=$CXXCOMP \
> -DCMAKE_Fortran_COMPILER=$FTNCOMP \
> -DCMAKE_BUILD_TYPE=Release \
> -DCMAKE_CXX_FLAGS=$COMP_FLAGS \
> -DCMAKE_C_FLAGS=$COMP_FLAGS \
> -DBUILD_SHARED_LIBS=OFF \
> -DPARAVIEW_ENABLE_PYTHON=ON \
> -DPYTHON_EXECUTABLE=$PYTHON/bin/python \
> -DPYTHON_INCLUDE_DIR=$PYTHON/include/python2.7 \
> -DPYTHON_LIBRARY=$PYTHON/lib/libpython2.7.$PY_LIB_EXT \
> -DPYTHON_UTIL_LIBRARY=/usr/lib64/libutil.$PY_LIB_EXT \
> -DPARAVIEW_FREEZE_PYTHON=OFF \
> -DBUILD_TESTING=OFF \
> *-DPARAVIEW_BUILD_QT_GUI=OFF \**
> ** -DCMAKE_X_LIBS="" \**
> ** -DX11_LIBRARIES="" \**
> ** -DVTK_USE_X=OFF \**
> ** -DVTK_OPENGL_HAS_OSMESA=ON \**
> ** -DOSMESA_INCLUDE_DIR=$MESA/include \**
> **-DOSMESA_LIBRARY="$MESA/lib/libOSMesa.$MESA_LIB_EXT;" \**
> ** -DOPENGL_INCLUDE_DIR=$MESA/include \**
> **-DOPENGL_gl_LIBRARY=$MESA/lib/libOSMesa.$MESA_LIB_EXT \**
> **-DOPENGL_glu_LIBRARY=$GLU/lib/libGLU.$GLU_LIB_EXT \**
> ** -DOPENGL_xmesa_INCLUDE_DIR=$MESA/include \*
> -DPARAVIEW_USE_MPI=ON \
> -DMPI_CXX_LIBRARIES="" \
> -DMPI_C_LIBRARIES="-Wl,--start-group;$MPT/libmpich.$LIB_EXT;$PMI/libpmi.$LIB_EXT;$DMAPP/libdmapp.$LIB_EXT;$MPT/libmpichcxx.$LIB_EXT;$UGNI/libugni.$LIB_EXT;$ALPS/libalpslli.$LIB_EXT;$ALPS/libalpsutil.$LIB_EXT;$RCA/librca.$LIB_EXT;$XPMEM/libxpmem.$LIB_EXT;-Wl,--end-group;"
> \
> -DMPI_INCLUDE_PATH=$MPT/../include \
> -DMPIEXEC=`which srun` \
> -DMPI_CXX_LIBRARIES="" \
> -DPARAVIEW_USE_VISITBRIDGE=ON \
> -DBoost_INCLUDE_DIR=$BOOST/include \
> -DVISIT_BUILD_READER_CGNS=OFF \
> -DVISIT_BUILD_READER_Silo=OFF \
> -DVTK_USE_SYSTEM_HDF5=OFF \
> -DPARAVIEW_INSTALL_DEVELOPMENT_FILES=ON \
> $*
>
>
>
> On 05/15/2017 02:24 AM, Patrick Begou wrote:
>> Hi Chuck, Hi Burlen
>>
>> Thanks for your reply.
>>
>> I've attached the setup of my mesa installation. I have more options enabled
>> in my config than in yours. May be too much as this frontend has no GPU
>> available.
>>
>> I'll try a setup with -DVTK_USE_X=OFF as Burlen suggest, but is it possible
>> to build paraview GUI with this option ? It is not clear for me.
>>
>> Patrick
>>
>> prefix: /share/apps/paraview-5.3.0
>> exec_prefix: ${prefix}
>> libdir: ${exec_prefix}/lib
>> includedir: ${prefix}/include
>>
>> OpenGL: yes (ES1: yes ES2: yes)
>>
>> OSMesa: libOSMesa (Gallium)
>>
>> DRI platform: drm
>> DRI drivers: i915 i965 nouveau r200 radeon swrast
>> DRI driver dir: ${libdir}/dri
>> GLX: DRI-based
>>
>> EGL: yes
>> EGL platforms: x11 drm
>> EGL drivers: builtin:egl_dri2 builtin:egl_dri3
>> GBM: yes
>>
>> Vulkan drivers: no
>>
>> llvm: yes
>> llvm-config: /share/apps/paraview-5.3.0/bin/llvm-config
>> llvm-version: 4.0.0
>>
>> Gallium drivers: r300 r600 svga swrast
>> Gallium st: mesa xvmc
>>
>> HUD extra stats: no
>> HUD lmsensors: no
>>
>> Shared libs: yes
>> Static libs: no
>> Shared-glapi: yes
>>
>> CFLAGS: -g -O2 -Wall -std=c99
>> -Werror=implicit-function-declaration -Werror=missing-prototypes
>> -fno-math-errno -fno-trapping-math
>> CXXFLAGS: -g -O2 -Wall -fno-math-errno -fno-trapping-math
>> Macros: -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS
>> -D_GNU_SOURCE -DUSE_SSE41 -DUSE_GCC_ATOMIC_BUILTINS -DNDEBUG -DUSE_X86_64_ASM
>> -DHAVE_XLOCALE_H -DHAVE_SYS_SYSCTL_H -DHAVE_STRTOF -DHAVE_MKOSTEMP
>> -DHAVE_DLOPEN -DHAVE_POSIX_MEMALIGN -DHAVE_LIBDRM -DGLX_USE_DRM
>> -DGLX_INDIRECT_RENDERING -DGLX_DIRECT_RENDERING -DGLX_USE_TLS -DHAVE_DRI3
>> -DENABLE_SHADER_CACHE -DHAVE_MINCORE -DHAVE_LLVM=0x0400
>> -DMESA_LLVM_VERSION_PATCH=0
>>
>> LLVM_CFLAGS: -I/share/apps/paraview-5.3.0/include
>> -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS
>> LLVM_CXXFLAGS: -I/share/apps/paraview-5.3.0/include -std=c++11
>> -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS
>> LLVM_CPPFLAGS: -I/share/apps/paraview-5.3.0/include
>> -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS
>> LLVM_LDFLAGS: -L/share/apps/paraview-5.3.0/lib
>>
>> PYTHON2: python2.7
>>
>
--
===================================================================
| Equipe M.O.S.T. | |
| Patrick BEGOU | mailto:Patrick.Begou at grenoble-inp.fr |
| LEGI | |
| BP 53 X | Tel 04 76 82 51 35 |
| 38041 GRENOBLE CEDEX | Fax 04 76 82 52 71 |
===================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20170516/ca73f9f8/attachment.html>
More information about the ParaView
mailing list