[Paraview] Error while launching Paraview (and Paraview Web) in Window 10

Debopam Ghoshal debopamg at gmail.com
Mon Jan 2 08:38:23 EST 2017


Hi Seb,

1. "C:/ParaView-5.2.0-Qt4-OpenGL2-MPI-Windows-64bit/data" works fine. Now
we can see the list of files in the data folder.

However, there seems to be some problem with the ParaviewWeb Application
(or may be with the graphics driver?). Because we cannot render the sample
mesh files (eg: can.ex2) in the visualizer. When we tried to view the files
in the desktop application they are displayed without any problems. A
screenshot of the graphics driver is attached for your reference.

2. Ok.


Cheers & Best Wishes,
Debopam
-------------------------------

On Fri, Dec 30, 2016 at 9:02 PM, Sebastien Jourdain <
sebastien.jourdain at kitware.com> wrote:

> Hi Debopam,
>
> 1) I'm not sure to know what is the issue with the path but try with
> either:
>
> "C:/ParaView-5.2.0-Qt4-OpenGL2-MPI-Windows-64bit/data"
> or
> "C:\\ParaView-5.2.0-Qt4-OpenGL2-MPI-Windows-64bit\\data"
>
> 2) paraview_console_error.jpg is not an error since you are not using the
> launcher. So that part is actually expected.
> For the second error when you try to delete the TimeAnnotation, I'm not
> sure to know what is the issue. You should know more by looking at the
> output of the command line.
>
> Seb
>
>
> On Fri, Dec 30, 2016 at 12:53 AM, Debopam Ghoshal <debopamg at gmail.com>
> wrote:
>
>> (Reposting for a larger audience)
>>
>> Hi Ken,
>>
>> When we start paraview web we noted two things:
>>
>> 1. In the Visualizer, the Files tab is not showing any files. Please
>> refer to the attached screenshot (paraview_home.jpg)
>> 2. There is an error showing up at the browser console
>> (paraview_console_error.jpg, paraview_console_error2.jpg)
>>
>> The paraview startup messages are also given for your reference
>> (paraview_log.jpg)
>>
>>
>>
>> Cheers & Best Wishes,
>> Debopam
>> -------------------------------
>> Cell: +91 98304 10041 <+91%2098304%2010041>
>>
>> On Wed, Dec 28, 2016 at 10:35 AM, Debopam Ghoshal <debopamg at gmail.com>
>> wrote:
>>
>>> Hi Ken,
>>>
>>> We finally got a machine where Paraview 5.2 MPI is running without any
>>> issues. However, when we start paraview web we noted two things:
>>>
>>> 1. In the Visualizer, the Files tab is not showing any files. Please
>>> refer to the attached screenshot (paraview_home.jpg)
>>> 2. There is an error showing up at the browser console
>>> (paraview_console_error.jpg, paraview_console_error2.jpg)
>>>
>>> The paraview startup messages are also given for your reference
>>> (paraview_log.jpg)
>>>
>>>
>>> Cheers & Best Wishes,
>>> Debopam
>>> -------------------------------
>>> Cell: +91 98304 10041 <+91%2098304%2010041>
>>>
>>> On Tue, Dec 13, 2016 at 7:03 PM, Ken Martin <ken.martin at kitware.com>
>>> wrote:
>>>
>>>> ParaView with the old OpenGL backend should work on any windows
>>>> machine. It may be slow and some of the advanced techniques may not work
>>>> but the basics will all work.
>>>>
>>>> On Tue, Dec 13, 2016 at 5:57 AM, Debopam Ghoshal <debopamg at gmail.com>
>>>> wrote:
>>>>
>>>>> Yes Ken, you are right. This is an older machine. So, will it be
>>>>> possible to use ParaView (with the old OpenGL backend) on this machine? Or
>>>>> we need to get a machine with better configuration to run ParaView?
>>>>>
>>>>> Additionally, will it be possible to run ParaView (and ParaViewWeb) on
>>>>> a Windows 10 guest running in VirtualBox on a MacOS host?
>>>>>
>>>>> Cheers & Best Wishes,
>>>>> Debopam
>>>>> -------------------------------
>>>>> Cell: +91 98304 10041
>>>>>
>>>>> On Mon, Dec 12, 2016 at 8:22 PM, Ken Martin <ken.martin at kitware.com>
>>>>> wrote:
>>>>>
>>>>>> So if I am reading this correctly the machine has a rv516 GPU which
>>>>>> was released in 2007. That GPU does not support anything beyond OpenGL 2.0
>>>>>> which means you would need to use the old OpenGL backend with VTK/ParaView.
>>>>>>
>>>>>> http://www.gpureview.com/ati-rv516-chip-135.html
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Mon, Dec 12, 2016 at 9:21 AM, Debopam Ghoshal <debopamg at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Ken,
>>>>>>>
>>>>>>> This is a standard desktop PC running Window 10 Professional
>>>>>>> Edition. If there is something I need to install on this machine, please
>>>>>>> let me know.
>>>>>>>
>>>>>>> Cheers & Best Wishes,
>>>>>>> Debopam
>>>>>>> -------------------------------
>>>>>>> Cell: +91 98304 10041
>>>>>>>
>>>>>>> On Mon, Dec 12, 2016 at 7:18 PM, Ken Martin <ken.martin at kitware.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Is this a server maybe? It seems like the system lacks any OpenGL
>>>>>>>> support beyond the default Microsoft implementation which is circa OpenGL
>>>>>>>> 1.4 I believe.
>>>>>>>>
>>>>>>>> On Sun, Dec 11, 2016 at 11:51 PM, Debopam Ghoshal <
>>>>>>>> debopamg at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi Ken,
>>>>>>>>>
>>>>>>>>> When I ran the command: vtkRenderingOpenGL2CxxTests.exe
>>>>>>>>> TestAppleBug there was an error. A screenshot of the error is attached for
>>>>>>>>> your reference. Please let me know if you require any other details.
>>>>>>>>>
>>>>>>>>> Cheers & Best Wishes,
>>>>>>>>> Debopam
>>>>>>>>> -------------------------------
>>>>>>>>> Cell: +91 98304 10041
>>>>>>>>>
>>>>>>>>> On Fri, Dec 9, 2016 at 7:17 PM, Ken Martin <ken.martin at kitware.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> Here is a new version of the executable, can you try it?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Fri, Dec 9, 2016 at 1:42 AM, Debopam Ghoshal <
>>>>>>>>>> debopamg at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Cory and Ken,
>>>>>>>>>>>
>>>>>>>>>>> Thanks a lot for your prompt response.
>>>>>>>>>>>
>>>>>>>>>>> Below are the details you asked:
>>>>>>>>>>> 1. display-props.png - screenshot of:  Settings -> System ->
>>>>>>>>>>> Display -> Advanced display settings -> Display adapter
>>>>>>>>>>> properties
>>>>>>>>>>> 2. vtkrendering.png - screenshot of the error which came up when
>>>>>>>>>>> I ran: vtkRenderingOpenGL2CxxTests.exe TestAppleBug
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Cheers & Best Wishes,
>>>>>>>>>>> Debopam
>>>>>>>>>>> -------------------------------
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Dec 8, 2016 at 10:49 PM, Ken Martin <
>>>>>>>>>>> ken.martin at kitware.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Can you try running the following executable (rename .foo to
>>>>>>>>>>>> .exe) from a cmd shell as
>>>>>>>>>>>>
>>>>>>>>>>>> vtkRenderingOpenGL2CxxTests.exe TestAppleBug
>>>>>>>>>>>>
>>>>>>>>>>>> and see if it crashes, and send the output is produces
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks
>>>>>>>>>>>> Ken
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Dec 8, 2016 at 10:46 AM, Cory Quammen <
>>>>>>>>>>>> cory.quammen at kitware.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Depobam,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks for trying out the other ParaView versions. I suspect
>>>>>>>>>>>>> there
>>>>>>>>>>>>> might be a problem with the new OpenGL backend on your system
>>>>>>>>>>>>> as that
>>>>>>>>>>>>> has changed between ParaView 4 and 5. What kind of graphics
>>>>>>>>>>>>> card do
>>>>>>>>>>>>> you have on your system. You can get some of the display
>>>>>>>>>>>>> properties by
>>>>>>>>>>>>> going to
>>>>>>>>>>>>>
>>>>>>>>>>>>> Settings -> System -> Display -> Advanced display settings ->
>>>>>>>>>>>>> Display
>>>>>>>>>>>>> adapter properties
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ken,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Are there any things Depobam can do on his Windows 10 system
>>>>>>>>>>>>> to help
>>>>>>>>>>>>> diagnose whether the OpenGL2 backend is causing the crash he
>>>>>>>>>>>>> is seeing
>>>>>>>>>>>>> in ParaView?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>> Cory
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Dec 8, 2016 at 2:51 AM, Debopam Ghoshal <
>>>>>>>>>>>>> debopamg at gmail.com> wrote:
>>>>>>>>>>>>> > Hi Cory,
>>>>>>>>>>>>> >
>>>>>>>>>>>>> > I tried to run Paraview 5.1.2, but it gives the same error.
>>>>>>>>>>>>> However, I was
>>>>>>>>>>>>> > able to run Paraview 4.1 successfully on Window 10.
>>>>>>>>>>>>> >
>>>>>>>>>>>>> > But ParaviewWeb failed to run as it seems that version 4.1
>>>>>>>>>>>>> does not have the
>>>>>>>>>>>>> > python script used for running ParaviewWeb.
>>>>>>>>>>>>> >
>>>>>>>>>>>>> >
>>>>>>>>>>>>> >
>>>>>>>>>>>>> > Cheers & Best Wishes,
>>>>>>>>>>>>> > Debopam
>>>>>>>>>>>>> > -------------------------------
>>>>>>>>>>>>> > Cell: +91 98304 10041
>>>>>>>>>>>>> >
>>>>>>>>>>>>> > On Wed, Dec 7, 2016 at 5:14 AM, Sebastien Jourdain
>>>>>>>>>>>>> > <sebastien.jourdain at kitware.com> wrote:
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >> Cory you need to provide an absolute path as argument
>>>>>>>>>>>>> "c:\.....".
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >> But the issue seems to be on ParaView itself. The (Qt)
>>>>>>>>>>>>> executable crash at
>>>>>>>>>>>>> >> startup on there machine, regardless of their goal to use
>>>>>>>>>>>>> ParaViewWeb down
>>>>>>>>>>>>> >> the road.
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >> Seb
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >> On Tue, Dec 6, 2016 at 10:06 AM, Cory Quammen <
>>>>>>>>>>>>> cory.quammen at kitware.com>
>>>>>>>>>>>>> >> wrote:
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Correction: I could run ParaViewWeb on Windows 10, but I
>>>>>>>>>>>>> couldn't load
>>>>>>>>>>>>> >>> data through the web client. I didn't get pvpython.exe to
>>>>>>>>>>>>> crash,
>>>>>>>>>>>>> >>> though.
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> On Tue, Dec 6, 2016 at 11:35 AM, Cory Quammen <
>>>>>>>>>>>>> cory.quammen at kitware.com>
>>>>>>>>>>>>> >>> wrote:
>>>>>>>>>>>>> >>> > Debopam,
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> > I just tried what you ran on Windows 10 and it ran fine
>>>>>>>>>>>>> for me. One
>>>>>>>>>>>>> >>> > thing I had to fix, which I doubt is the cause of your
>>>>>>>>>>>>> crash, is the
>>>>>>>>>>>>> >>> > data argument is actually just --data and not --data-dir.
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> > We've had some other reports of 5.2 crashing on start up
>>>>>>>>>>>>> on Windows.
>>>>>>>>>>>>> >>> > Did 5.1 run fine for you?
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> > I wonder if you could try installing ParaView 4.4 from
>>>>>>>>>>>>> >>> > http://www.paraview.org/download/ to see if it runs. If
>>>>>>>>>>>>> it does, that
>>>>>>>>>>>>> >>> > gives me a clue on where to look.
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> > Thanks,
>>>>>>>>>>>>> >>> > Cory
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> > On Tue, Dec 6, 2016 at 5:23 AM, Debopam Ghoshal <
>>>>>>>>>>>>> debopamg at gmail.com>
>>>>>>>>>>>>> >>> > wrote:
>>>>>>>>>>>>> >>> >> Hi,
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> I followed the instructions given here, but I am
>>>>>>>>>>>>> getting the following
>>>>>>>>>>>>> >>> >> error:
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Paraview Installation Directory:
>>>>>>>>>>>>> >>> >> C:\ParaView-5.2.0-Qt4-OpenGL2-Windows-64bit
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Command:
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> .\bin\pvpython.exe \
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> "C:\ParaView-5.2.0-Qt4-OpenGL2
>>>>>>>>>>>>> -Windows-64bit\share\paraview-5.2\web\visualizer\server\pvw-
>>>>>>>>>>>>> visualizer.py"
>>>>>>>>>>>>> >>> >> \
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>   --content
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> "C:\ParaView-5.2.0-Qt4-OpenGL2
>>>>>>>>>>>>> -Windows-64bit\share\paraview-5.2\web\visualizer\www\"
>>>>>>>>>>>>> >>> >> \
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>   --data-dir "C:\ParaView-5.2.0-Qt4-OpenGL2-Windows-64bit\data\"
>>>>>>>>>>>>> \
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>   --port 8080
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Output:
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Console: 2016-12-02 10:09:51+0530 [-] Log opened.
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Error Window screenshot attached (PVW-Error.png)
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Other Details:
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> OS: Windows 10 Professional
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> RAM: 8GB
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> A screenshot of the system properties is attached for
>>>>>>>>>>>>> your reference
>>>>>>>>>>>>> >>> >> (Window10-SystemProps.png)
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Similar error occurred when I launched the Paraview
>>>>>>>>>>>>> desktop
>>>>>>>>>>>>> >>> >> application
>>>>>>>>>>>>> >>> >> (ParaviewError.png).
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Cheers & Best Wishes,
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Debopam
>>>>>>>>>>>>> >>> >> -------------------------------
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> _______________________________________________
>>>>>>>>>>>>> >>> >> Powered by www.kitware.com
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Visit other Kitware open-source projects at
>>>>>>>>>>>>> >>> >> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Please keep messages on-topic and check the ParaView
>>>>>>>>>>>>> Wiki at:
>>>>>>>>>>>>> >>> >> http://paraview.org/Wiki/ParaView
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Search the list archives at:
>>>>>>>>>>>>> http://markmail.org/search/?q=ParaView
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>> >>> >> http://public.kitware.com/mailman/listinfo/paraview
>>>>>>>>>>>>> >>> >>
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> >
>>>>>>>>>>>>> >>> > --
>>>>>>>>>>>>> >>> > Cory Quammen
>>>>>>>>>>>>> >>> > Staff R&D Engineer
>>>>>>>>>>>>> >>> > Kitware, Inc.
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> --
>>>>>>>>>>>>> >>> Cory Quammen
>>>>>>>>>>>>> >>> Staff R&D Engineer
>>>>>>>>>>>>> >>> Kitware, Inc.
>>>>>>>>>>>>> >>> _______________________________________________
>>>>>>>>>>>>> >>> Powered by www.kitware.com
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Visit other Kitware open-source projects at
>>>>>>>>>>>>> >>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Please keep messages on-topic and check the ParaView Wiki
>>>>>>>>>>>>> at:
>>>>>>>>>>>>> >>> http://paraview.org/Wiki/ParaView
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Search the list archives at:
>>>>>>>>>>>>> http://markmail.org/search/?q=ParaView
>>>>>>>>>>>>> >>>
>>>>>>>>>>>>> >>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>> >>> http://public.kitware.com/mailman/listinfo/paraview
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >>
>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Cory Quammen
>>>>>>>>>>>>> Staff R&D Engineer
>>>>>>>>>>>>> Kitware, Inc.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Ken Martin PhD
>>>>>>>>>>>> Chairman & CFO
>>>>>>>>>>>> Kitware Inc.
>>>>>>>>>>>> 28 Corporate Drive
>>>>>>>>>>>> Clifton Park NY 12065
>>>>>>>>>>>> 518 371 3971
>>>>>>>>>>>>
>>>>>>>>>>>> This communication, including all attachments, contains
>>>>>>>>>>>> confidential and legally privileged information, and it is intended only
>>>>>>>>>>>> for the use of the addressee.  Access to this email by anyone else is
>>>>>>>>>>>> unauthorized. If you are not the intended recipient, any disclosure,
>>>>>>>>>>>> copying, distribution or any action taken in reliance on it is prohibited
>>>>>>>>>>>> and may be unlawful. If you received this communication in error please
>>>>>>>>>>>> notify us immediately and destroy the original message.  Thank you.
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Ken Martin PhD
>>>>>>>>>> Chairman & CFO
>>>>>>>>>> Kitware Inc.
>>>>>>>>>> 28 Corporate Drive
>>>>>>>>>> Clifton Park NY 12065
>>>>>>>>>> 518 371 3971
>>>>>>>>>>
>>>>>>>>>> This communication, including all attachments, contains
>>>>>>>>>> confidential and legally privileged information, and it is intended only
>>>>>>>>>> for the use of the addressee.  Access to this email by anyone else is
>>>>>>>>>> unauthorized. If you are not the intended recipient, any disclosure,
>>>>>>>>>> copying, distribution or any action taken in reliance on it is prohibited
>>>>>>>>>> and may be unlawful. If you received this communication in error please
>>>>>>>>>> notify us immediately and destroy the original message.  Thank you.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Ken Martin PhD
>>>>>>>> Chairman & CFO
>>>>>>>> Kitware Inc.
>>>>>>>> 28 Corporate Drive
>>>>>>>> Clifton Park NY 12065
>>>>>>>> 518 371 3971
>>>>>>>>
>>>>>>>> This communication, including all attachments, contains
>>>>>>>> confidential and legally privileged information, and it is intended only
>>>>>>>> for the use of the addressee.  Access to this email by anyone else is
>>>>>>>> unauthorized. If you are not the intended recipient, any disclosure,
>>>>>>>> copying, distribution or any action taken in reliance on it is prohibited
>>>>>>>> and may be unlawful. If you received this communication in error please
>>>>>>>> notify us immediately and destroy the original message.  Thank you.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Ken Martin PhD
>>>>>> Chairman & CFO
>>>>>> Kitware Inc.
>>>>>> 28 Corporate Drive
>>>>>> Clifton Park NY 12065
>>>>>> 518 371 3971
>>>>>>
>>>>>> This communication, including all attachments, contains confidential
>>>>>> and legally privileged information, and it is intended only for the use of
>>>>>> the addressee.  Access to this email by anyone else is unauthorized. If you
>>>>>> are not the intended recipient, any disclosure, copying, distribution or
>>>>>> any action taken in reliance on it is prohibited and may be unlawful. If
>>>>>> you received this communication in error please notify us immediately and
>>>>>> destroy the original message.  Thank you.
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Ken Martin PhD
>>>> Chairman & CFO
>>>> Kitware Inc.
>>>> 28 Corporate Drive
>>>> Clifton Park NY 12065
>>>> 518 371 3971 <(518)%20371-3971>
>>>>
>>>> This communication, including all attachments, contains confidential
>>>> and legally privileged information, and it is intended only for the use of
>>>> the addressee.  Access to this email by anyone else is unauthorized. If you
>>>> are not the intended recipient, any disclosure, copying, distribution or
>>>> any action taken in reliance on it is prohibited and may be unlawful. If
>>>> you received this communication in error please notify us immediately and
>>>> destroy the original message.  Thank you.
>>>>
>>>
>>>
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20170102/ec4cdfa6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WindowsGraphicsProperties.png
Type: image/png
Size: 21716 bytes
Desc: not available
URL: <http://public.kitware.com/pipermail/paraview/attachments/20170102/ec4cdfa6/attachment.png>


More information about the ParaView mailing list