[Paraview] ParaView superbuild matplotlib not finding numpy (UNCLASSIFIED)

Tue Jun 3 08:49:51 EDT 2014

Hi Simon,

You normally shouldn't have to point to the numpy directory, especially
when you are opting to build numpy, as your options show. I wonder if your
numpy built successfully.

If you navigate to

/u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build

and run 'make numpy', does it succeed?

Also, what can you send me the file /u/ssu/build/paraview/Build_4.
1.0_osmesa/ParaViewSuperbuild_4.1.0-build/pv-matplotlib-build.cmake? There
should be an option -DNUMPY_INSTALL_DIR:PATH in the command variable.

Thanks,
Cory

On Mon, Jun 2, 2014 at 5:05 PM, Su, Simon M CTR USARMY ARL (US) <
simon.m.su.ctr at mail.mil> wrote:

> Classification: UNCLASSIFIED
> Caveats: NONE
>
> Hello,
>
> How do you specify to the superbuild process when building 'matplotlib',
> where
> numpy was built?  I  configured cmake using the following and the error
> message at the end of the email
>
> thanks
> -simon
>
> cmake \
> -DCMAKE_INSTALL_PREFIX:PATH=${HOME}/pv-test/${version}_osmesa \
> -DCMAKE_BUILD_TYPE=Release \
> -DParaView_FROM_GIT=ON \
> -DENABLE_boost=ON \
> -DENABLE_cgns=OFF \
> -DENABLE_ffmpeg=ON \
> -DENABLE_fontconfig=ON \
> -DENABLE_freetype=ON \
> -DENABLE_hdf5=ON \
> -DENABLE_libxml2=ON \
> -DENABLE_matplotlib=ON \
> -DENABLE_mesa=OFF \
> -DENABLE_mpi=ON \
> -DENABLE_numpy=ON \
> -DENABLE_osmesa=ON \
> -DENABLE_paraview=ON \
> -DENABLE_png=ON \
> -DENABLE_python=ON \
> -DENABLE_qhull=ON \
> -DENABLE_qt=OFF \
> -DENABLE_silo=ON \
> -DENABLE_szip=ON \
> -DENABLE_visitbridge=ON \
> -DUSE_SYSTEM_mpi=ON \
> -DUSE_SYSTEM_python=ON \
> -DUSE_SYSTEM_zlib=ON \
> ../ParaViewSuperbuild_${version}
>
>
> ===================== error message
> ================================================
> -- Enabling zlib since needed by: boost;ffmpeg;freetype;hdf5;png;silo
> -- Enabling boost as requested.
> -- Enabling ffmpeg as requested.
> -- Enabling freetype as requested.
> -- Enabling libxml2 as requested.
> -- Enabling fontconfig as requested.
> -- Enabling szip as requested.
> -- Enabling hdf5 as requested.
> -- Enabling python as requested.
> -- Enabling numpy as requested.
> -- Enabling png as requested.
> -- Enabling matplotlib as requested.
> -- Enabling mpi as requested.
> -- Enabling osmesa as requested.
> -- Enabling qhull as requested.
> -- Enabling silo as requested.
> -- Enabling visitbridge as requested.
> -- Enabling paraview as requested.
> -- PROJECTS_ENABLED
>
> zlib;boost;ffmpeg;freetype;libxml2;fontconfig;szip;hdf5;python;numpy;png;matplotlib;mpi;osmesa;qhull;silo;visitbridge;paraview
> -- Configuring done
> -- Generating done
> -- Build files have been written to:
> /u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build
>
> /u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install/lib64/python2.6/site-packages
> [ 20%] [ 22%] [ 29%] [ 38%] [ 38%] [ 37%] [ 40%] [ 40%] Built target zlib
> Built target szip
> Built target python
> Built target libxml2
> Built target visitbridge
> Built target osmesa
> Built target mpi
> Performing update step for 'qhull'
> [ 49%] [ 55%] Built target freetype
> [ 70%] [ 70%] [ 73%] [ 73%] Built target hdf5
> Built target numpy
> Built target png
> Built target boost
> Built target ffmpeg
> [ 78%] Built target fontconfig
> [ 81%] [ 84%] Built target silo
> Performing build step for 'matplotlib'
> LD_LIBRARY_PATH =
>
> /u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/install/lib:/opt/cray/shared-root/1.0-1.0402.46893.3.17.gem/lib64:/opt/cray/nodehealth/5.1-1.0402.45895.3.76.gem/lib64:/opt/cray/csa/3.0.0-1_2.0402.45268.1.90.gem/lib64:/opt/cray/job/1.5.5-0.1_2.0402.45272.1.5.gem/lib64:/opt/gcc/mpc/0.8.1/lib:/opt/gcc/mpfr/2.4.2/lib:/opt/gcc/gmp/4.3.2/lib:/opt/gcc/4.8.2/snos/lib64:/opt/cray/shared-root/1.0-1.0402.46893.3.17.gem/lib64:/opt/cray/nodehealth/5.1-1.0402.45895.3.76.gem/lib64:/opt/cray/csa/3.0.0-1_2.0402.45268.1.90.gem/lib64:/opt/cray/job/1.5.5-0.1_2.0402.45272.1.5.gem/lib64:/opt/gcc/mpc/0.8.1/lib:/opt/gcc/mpfr/2.4.2/lib:/opt/gcc/gmp/4.3.2/lib:/opt/gcc/4.8.2/snos/lib64
> Already on 'master'
> Your branch is up-to-date with 'origin/master'.
> CMake Error at
>
> /u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0/Projects/matplotlib.build.cmake:12
> (message):
>   Failed to locate numpy-egg
>
>
> CMake Error at
>
> /u/ssu/build/paraview/Build_4.1.0_osmesa/ParaViewSuperbuild_4.1.0-build/pv-matplotlib-build.cmake:26
> (message):
>   Failed!!!
>
>
> make[2]: *** [matplotlib/src/matplotlib-stamp/matplotlib-build] Error 1
> make[1]: *** [CMakeFiles/matplotlib.dir/all] Error 2
> make[1]: *** Waiting for unfinished jobs....
> [ 85%] Performing configure step for 'qhull'
>
>
> Classification: UNCLASSIFIED
> Caveats: NONE
>
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20140603/e1c235b1/attachment.html>