[Dart] Dart Setup Question - Again

[Todd Pitts]

Andy,

	I tried telneting and got

 telnet localhost 8081
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.


The final line took about 5 seconds to appear.  

-Todd

On Fri, 2006-10-20 at 14:49 -0400, Andy Cedilnik wrote:
> I think your URL is wrong or your dart server is not running.
> 
> Try telneting to your system:
> 
> telnet localhost 8081
> 
> If it works, you should see something like:
> 
> andy at xuma $ telnet www.na-mic.org 8081
> Trying 155.52.248.58...
> Connected to www.na-mic.org.
> Escape character is '^]'.
> 
> Ok?
> 
> Andy
> 
> 
> On 10/20/06, Todd Pitts <tapitts at sandia.gov> wrote:
>         David,
>         
>                 I don't have a DartConfig.cmake (perhaps I need
>         one?).  I do have a
>         CTestConfig.cmake in my project's root directory with
>         contents:
>         
>         
>         SET (CTEST_PROJECT_NAME "TestProject")
>         SET (CTEST_NIGHTLY_START_TIME "21:00:00 EDT") 
>         SET (CTEST_DROP_METHOD "xmlrpc")
>         SET (CTEST_DROP_SITE "http://localhost:8081")
>         SET (CTEST_DROP_LOCATION "TestProject")
>         SET (CTEST_COMPRESS_SUBMISSION OFF) 
>         
>         
>         -Todd
>         
>         On Fri, 2006-10-20 at 10:58 -0400, David Cole wrote:
>         > What does your project's DartConfig.cmake file look like?
>         >
>         > On 10/20/06, Todd Pitts <tapitts at sandia.gov> wrote:
>         > > All,
>         > >
>         > > Still having trouble setting up Dart2.  The server runs
>         and serves the
>         > > webpage.  It shuts down when the client tells it
>         to.  However, the 
>         > > xmlrpc submission from ctest appears to be completely
>         ignored - no
>         > > indication in the DartServer output that anything even
>         tried to contact
>         > > it.  I checked the port number and it is 8081 (just like
>         the webpage). 
>         > > I checked my firewall - nothing blocked there.  I just get
>         the output
>         > > below.  Also, the Dart.pdf file has "to be completed"
>         under the software
>         > > installation chapter.  Should I worry about this?  I
>         haven't done much 
>         > > in the way of administration on the server, do I have to
>         in order to get
>         > > this thing submitting?  Any help would be appreciated.
>         > >
>         > > -Todd
>         > >
>         > > tapitts at planck :libsri-build$ ctest -V -D Experimental
>         > >    Site: planck.sandia.gov
>         > >    Build name: Linux-c++
>         > > Create new tag: 20061020-1448 - Experimental
>         > > Start processing tests 
>         > > Configure project
>         > > Configure with command: "/usr/local/cmake/bin/cmake"
>         > > "/home/tapitts/libsri"
>         > > Run command: "/usr/local/cmake/bin/cmake"
>         "/home/tapitts/libsri" 
>         > >    Each . represents 1024 bytes of output
>         > >     .-- Configuring done
>         > > -- Generating done
>         > > -- Build files have been written to: /home/tapitts/libsri-
>         build
>         > >  Size of output: 0K 
>         > > Command exited with the value: 0
>         > > Build project
>         > > Run command: "/usr/bin/gmake" "-i"
>         > >    Each symbol represents 1024 bytes of output.
>         > >    '!' represents an error and '*' a warning. 
>         > >     .[ 33%] Built target sri
>         > > [ 66%] Built target version-demo
>         > > [100%] Built target version-test
>         > >  Size of output: 0K
>         > > Command exited with the value: 0
>         > >    0 Compiler errors 
>         > >    0 Compiler warnings
>         > > Test project
>         > > Constructing a list of tests
>         > > Done constructing a list of tests
>         > > Changing directory into /home/tapitts/libsri-build
>         > >   1/  1 Testing SimpleTest 
>         > > Test command: /home/tapitts/libsri-build/Tests/version-
>         test Hello
>         > > $Revision: 1.1.1.1 $
>         > > -- Process completed
>         > >    Passed
>         > >
>         > > 100% tests passed, 0 tests failed out of 1 
>         > > Performing coverage
>         > >  Cannot find any coverage files.
>         > > Submit files (using xmlrpc)
>         > >    Using XML-RPC submit method
>         > >    Submitting to:
>         http://localhost:8081/TestProject/Command/
>         > > (TestProject)
>         > >    Submit file: /home/tapitts/libsri-
>         > > build/Testing/20061020-1448/Build.xml
>         > >  Submission problem: HTTP response: 403 (-504) 
>         > >    Problems when submitting via XML-RPC
>         > > Errors while running CTest
>         > >
>         > >
>         > >
>         > > _______________________________________________
>         > > Dart mailing list 
>         > > Dart at public.kitware.com
>         > > http://public.kitware.com/mailman/listinfo/dart
>         > >
>         >
>         
>         
>         _______________________________________________
>         Dart mailing list
>         Dart at public.kitware.com
>         http://public.kitware.com/mailman/listinfo/dart
> 
> 
> 
> -- 
> -------------------------------------------
> Andy Cedilnik
> Kitware Inc.
> http://www.kitware.com
> Phone: +1 518 371 3971 x110